Transport of SLD-Systems from QA to PRD

Hi,
because we want to transport everything from QA-XI to PRD-XI we have to transport SLD-Systems as well. Therefore i tried to give some groups to the systems like QA and PRD group. I want to add the previously applied systems to these groups under Business-System-Integration, but it is not possible to use the combo-box for Group.
How could i maintain the systems to there groups?! After this i would like to configure the transport!
br Carsten
P.S. we have PI 7.0

Well there are some blogs which i found recently:
<a href="/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation">XI Software Logistics 1 Transport Business Systems</a>
<a href="/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview">XI Software Logistics 2 Overview</a>
<a href="/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms">XI Software Logistics Solution 3 CMS</a>
Perhaps make a new one or refer to these!
br

Similar Messages

Error while exporting/transporting the Business system from Dev to Quality

Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
Ramesh

Go through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful

Transporting a SAP Query from DEV to PRD

Hi,
We created a Query Report using SQ03, SQ02 and SQ01 for Travel Report in DEV and is working fine. Now, we want to move this query to PRD. For this, we tried create a Transport using SQ02>Environment>Transports and finally a transport request was generated and moved to PRD.
But the requisite Query, Infosets and User Groups are not there in PRD. Are we using the correct approach to Transport a Query to PRD?
Please help.
Regards,
CMC Team

1. While saving User Group in SQ03, save it in correct Package (not as Local Object) and a Transport Request will be created.
2. Create Infoset in SQ02 and save it in same Transport which was created in Step 1 above.
3. Create Query in SQ01 and again it in same Transport which was created in Step 1 above.
Release this Transport Request and move to PRD.
Hope it will help you.

Transporting SQ01 Customer Query from DEV to PRD

Hi All,
I am not sure whether I am in the right forum, but maybe you still can help me.
I created SQ01 for Customer Master query in our DEV environment, and i assigned t-code for the query.
Can i transport it in our PRD? Or it is more advisable to create the t-code in PRD directly?
Please note that the query is both existing in DEV and PRD.
Hoping for your positive feedback.
Thank you.

Hai TINA,
Hope you would have created T code using SE93 for your query program.
and your SQ01 program may be like this, and in the program the bold letter differs from client to client.
AQ FU SYSTQV000003XXXXXXX===
AQ IC SYSTQV000003XXXXXXX===
So while transporting it may give error that the program is not in the client, or while executing the T CODE it may give dump.
Hence create the query in production client and create the T code for the program and assign to the users.
Some tips may be helpful:
1. Always Use T code : SQVI to create the ALV report, user friendly that SQ01.
2. In case if you are making Customer master details report, if you are include all customer master tables, in case for some customer if some details were not maintained then the details will not displayed.
In that case, in the joint between two respective tables, right click and change it to Left Outer join.
3. If some data is replicated, then need to change the table path, like in case of billing always start from Biling item then to Billing header.
Regards,
Mani

Transporting SLD objects from DEV to PROD

Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.

Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

Transporting into a new BW system from a shared dev system

We are currently in the process of setting up a new BW system in the same landscape as our existing one where both boxes will share the same dev system. Our existing one is used by many different applications and has tonnes of shared objects on it. Our new box will only be used for SEM-BCS and thus does not need everything else that the other box contains. Since many objects are dependant on others (attributes and such) I am finding it hard to get transports into the new system. There always seems to be something missing even when I try to just move a single object. I also seem to be having troubles with InfoObject Catalogs where they cannot be moved if the InfoObjects are not there and the InfoObjects a cannot be moved with the Catalogs not there. This is all starting to give me a serious headache.
Has anyone delt with transporting to separate systems from a common development system? What is the best approach to this to ensure we only move what we need to the new system?

The transporting is the same, however there are a lot of dependant objects that also need to be brought into our system. I'm looking for a way to minimize what I need to transport into our new system.
Collecting automatically doesn;t seem to be working for me since it does not collect everything I need and when I add that missing object I then seem to be missing another list of objects. It seems to be a never ending cycle.

Defining SLD Target Systems for DEV, QAS & PRD

In a 3 tier XI landscape (DEV, QAS, PRD) which of the following two scenarios is best?
1. In the SLD define each DEV Business System with a target of the corresponding QAS Business System and define each QAS Business System with a target of the corresponding PRD Business System.
DEV ---> QAS ---> PRD
This means that we export ID objects from DEV and then import them into QAS. The objects then need to be exported from QAS for import into PRD
2. In the SLD define the DEV Business Systems with 2 target systems relating to corresponding QAS and PRD Business Systems.
DEV --> QAS
DEV --> PRD
This means that the same export from DEV can be used for import to both QAS and PRD.
Currently we have scenario 1 implemented but I am thinking of changing this to scenario 2 which I believe is a better solution as only one export is required and it is guaranteed that the same objects are being imported into QAS and PRD.
Any thoughts or comments?

Hi Mark,
I dont think thats a good thing to go with. When you are exporting, how are you going to control in CMS as to which environment you are going to export?
CMS itslef works on the principle of Develop->QA->PRD. This way, when you are in QA and found some bugs and fix them, you can export them all to QA. Finally you assemble them at QA and finally import them to PRD. This way, all the chaged objects later on would also get imported to PRD automatically.
Also As per my knowledge, in SLD, one target bus sys can have mulitple sources but the converse is not true.
VJ

Exporting technical/business systems from one SLD to another

Hi Experts,
Currently we have dev/qa SLD and production SLD. I currently have access to create/modify technical and business systems in dev/qa SLD but when I try to export these technical/business systems the link to export is disabled. Is there a different security role that I need in order to be able to export the techincal and business systems that have been created in the dev/qa SLD? I need to export these systems and import them into the production SLD.
Are there any impacts/differences between exporting/importing and creating the systems manually? For example if I cannot export the systems would it be ok if I created them again in the production SLD?
Thank you

YOu need the authorization for login in SLD as admin
Follow this link for compete details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Are there any impacts/differences between exporting/importing and creating the systems manually? For example if I cannot export the systems would it be ok if I created them again in the production SLD?
No differeence...it's just increase the work you have to do in SLD...but the important thing here is when you move the tranports of the SLD BS from DEV to Production you have to maintin the same name as you have maintained in the trnsport targets in the DEV......your ID tranport to Production is dependedn on what is the BS name you are mentinog of production in the transports targets.

Protect Production Systems from Local SLD installations

If we have several developers in our organization with Local Development Workstations (meaning they installed a local copy of WAS 6.40, MaxDb, Portal) how do we prevent those developers from setting up there local SLD to connect to Production Systems. If they set up a production system in the local SLD they will be able to configure their "adaptive rfc webdynpros" to connect to the production system with the jco connections in the Webdynpro Content Administrator. Is the only control point their id they would enter when configuring the jco connection?

YOu need the authorization for login in SLD as admin
Follow this link for compete details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Are there any impacts/differences between exporting/importing and creating the systems manually? For example if I cannot export the systems would it be ok if I created them again in the production SLD?
No differeence...it's just increase the work you have to do in SLD...but the important thing here is when you move the tranports of the SLD BS from DEV to Production you have to maintin the same name as you have maintained in the trnsport targets in the DEV......your ID tranport to Production is dependedn on what is the BS name you are mentinog of production in the transports targets.

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading ID of own business system from the SLD

HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>DSM</SAP:P1>
<SAP:P2>900</SAP:P2>
<SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
Regards,
Anand

Hi Anand,
check the two thing's in XI.
1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
2. Create the business system based on above technical system and select the role of business system is Integration server.
URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Create the technical system based on your SAP R/3 system.
4. Create the business system based on your SAP R/3 system.
here you need to select role of business system : Application system.
related integration server is : <XI System SID has to come>
and try to refresh the initical cache once ...
http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
after all the things post what is the problem you are faceing.
Regards,
Venu.

Error while reading ID of own business system from the SLD for system

Dear all,
We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
- SLDCHECK reports no errors
- SLAPICUST: pointing to the SLD
- SXI_CACHE with full refresh: no result.
Does anyone have a clue for me?
Kind regards,
John.

I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
1. First try to clear full SLD cache and then test.
2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario.

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
<b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

Error while reading ID of own business system from the SLD for system DPI

Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

Hi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv...

Transport of SLD-Systems from QA to PRD

Similar Messages

Maybe you are looking for