Transport of Source System assignment for a Virtual Cube

Built a transport with the datasources, transfer rules, cubes etc..
After transport to my Q system - in the Q system I am not seeing any source system assignment for my remote cube
OBviously it exists in Dev
Everythign else is fine - datasource, infosource trasnfer rules but nothing underneath the infocube where the source system normally is
transport before and after in the transport conenctor picks up nothing to be transported
Logical system mapping table in Q is fine (naturally - because the datasouces got there) - replicate all done
Any ideas?

hi Simon,
check sap help
http://help.sap.com/saphelp_nw04/helpdata/en/3b/63c620e18411d4b2d90050da4c74dc/frameset.htm
The source system assignments are local to the system and are not transported.
hope this helps.

Similar Messages

Delete Source System Assignment for a DataMart Infosource in BW3.0B

Hello Experts:
Can one of you assist me with how to delete source system assignment for a system generated infosource(ie., Infosource existing under data Mart). i noticed that in case of an Info Cube, system provides an option to delete the source system assignment but not for an ODS.
I am trying to delete the system data source 8* that has been assigned to the data mart info source 8* and reassign the data source to my custom info source.
Any ideas would be highly appreciated.
BTW, we are on BW3.0B
Thanks,
Ragavan

Hi,
Go into the infosource with change mode. Open the transfer Rule/transfer structure and hit the delete button. It'll ask for delete datasource assignment. That would delete the source system assignment.
Cheers,
Kedar

Source system Assignment for Virtual Cube

HI,
I transported infosource and transfer rules to production, but source system is not transported. if i am right i think i need to assign source system(prd) manually. but in prd all objects are not changeble, then how can i assign the source system to infosouce.
Regards
Rajini

HI,
I transported infosource sucessfully to production , but when i am trying to transport transfer rules , giving warning source system is not transportable. this is happening with remote cube only. all other normal transports are fine.
i think there is a special way to transport TR for remote cube. pls. help me.
Rajini

Source system assignment while transporting to quality

Hi Guys,
I have the following landscape.
I have created 2 source system ECCDEV and CRMDEV for my BIDEV.
Now I wish to do transport to Quality box and i want to know what should be the source system assignment , I should maintain in rsa1->transport connection -> conversion of logical system name.
When I maintain ECCDEV -
> ECCQUA
I get the error : ECCQUA entry does not exist in TBDLS.
Do I have to maintain source system ECCQUA(Quality) in BIDEV(Development) itself?
-Amit

Hi Rakesh,
Let me know if my understanding is correct.
In DEV BI, I create a connection to DEV ECC.
Also, I create source system ID's for source system.
In the QUA BI, I create a connection with QUA ECC.
and assign source system connection (source and target) i.e. DEVECC and QUAECC.
Then I transport requests(activated datasources) from DEVECC to QUAECC and replicate the datasource in QUABI.
Please Confirm.
-Amit

Cannot see Source system Assignment after Transporting to QA

Hi All
I need your help once again, I transported a ODS object from DEV to QA, In dev it has a source system assignment but, in QA I don't see the source system assignment.
I went into sm59 and did a test connection and authorization, everything looks fine. I did a restore connection and replicated data sources, and transported again, but still I don't see the source system.
On R/3 side the application componenet nodes did not get transported with the data source.
Please let me know if I am missing anything that needs to be transported.
Thanks
Latha

Hello Latha,
Please see the import log for that transport in se01 in the BW dev system.What is the exact error messages it gives?U may need to also look at the long text of the messages.
Another point abt what u have said..that in the corresponding R/3 QA system,the datasource is not showing up in rsa6,am I right?
then there was some problem with the transport from R/3 dev,that contained the datasource definition.check that transport too..
cheers,
Vishvesh

Importance of "Source System Assignment While transporting the objects

Hi Friends,
What is the Importance of "Source System Assignment While transporting the objects. And when do we select this icon. what is the exatly significance for this.
Thanks in advance for all......
Regards,
Ramesh.

HI Rameshpennabadi ,
This option is only enable for object like transfer rule, data source and IP if you want them to assign source systems,other wise the dialog box Choose Source system by Default? appears.
Thanks,
Deepak

Source system assignement in production

Hi all
Before importing any requests which are related to infosource , cubes and update rules into production, do we need to make any source system assignment in production system?
I have directly imported into production but there were no source system / data source assignments to these infosource.
can you please suggest what to do for these souce system assignments in production.
thanks in advance
AN

Hi,
you have to assign the production source system to your BW system. After replication of the DataSources, you can import your development from the BW development system.
Important is the conversion in the SPRO Transaction - Change source system name after transport. In this view you have to type in the source system name of the source system linked to your development system and the name of the source system linked to your production system. During import to production system, BW will automatically change the source system names.
regards
Juergen

Source System Assignment while Installing Business Content

Hi,
I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
Please Advice
Thanks

Hi Shurobhi
with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
Hope this helps
Regards
Pradip

What is delete Source system assignment???

Hello All,
If we go inside Infosource in Source system and then right click there. One option there is " Delete Source System assignment" .
If we chosse this option then what will happen? Can i reassign infosource to new souce system after chosing this??
Thanks for reply

Hi,
Yes, this deltes the sync between source sytem(DATA SOURCE) to bi.(INFOSOURCE)
and you can get connected to another source system, but this may lead to problems. so make sure before delte the sourcesys asigment and going for new one.
Edited by: Aduri on Dec 26, 2007 10:08 AM

Business Content Source System Assignment???

Hi Gurus,
i am installing Business content and after going thru few posts in this Forums i have been hearing about Source system assignment in the Business content screen.
but when ever i installed i never really used this option and we have only one R/3 source system
Can anybody explain me its functionality please
thankyou
harish

When you activate Business Content, DataSources from source systems are assigned to InfoSources in SAP BW. If you do not select a source system, all source systems are automatically assigned. If you have several source systems this may take a lot of time because transfer rules have to be activated for each DataSource from each source system.
However an assignment of a DataSource to an InfoSource may not be necessary for all existing Source systems.
Assign only the source systems you need to load data from for the Business Content Objects that you are going to activate.
You can subsequently change the selection you made.
The assignment of source systems is only relevant for transfer rules, DataSources and InfoPackages. If there is more than one source system, only those objects assigned to the specified source system are collected for the transfer. Objects that have not been assigned to the specified source systems are ignored.

No system assigned for partner in transaction DPCOMMON_MAP_P_S ( Dealer Portal)

Hello all,
Sorry to post a very basic question, but I am quite new to Dealer Portal and SD functional module. Request to help.
I have deployed spare part business package on portal. BP documentaion link. http://help.sap.com/erp2005_ehp_04/helpdata/EN/c3/f71b9a69574d6c84ac33b68d2d03c3/frameset.htm
I have configured as per the steps mentioned in the link below,but still facing issues..
http://help.sap.com/erp2005_ehp_05/helpdata/en/e6/e58079420c4b7e87df4f9c3db04719/content.htm?frameset=/en/e6/e58079420c4b7e87df4f9c3db04719/frameset.htm
As per the above link,below are the steps done.
I have created logical system and assigned to RFC destination using transaction DPCOMMON_MAP_S_R.
Then assigned the logical system created at the above step to partner, through transaction DPCOMMON_MAP_P_S
And lastly also assigned users to partners through transaction DPCOMMON_MAP_U_P.
However I am getting below errors when initial overview screen is accessed,I think there are some configurations missing.. Any help is appreciated.
Personalization data not found.
No system assigned for partner in transaction DPCOMMON_MAP_P_S
Thanks
San

Issue is resolved.
For the RFC destination , log on security tab. Ensure current user is ticked and no hard coded user id being passed here.
Also ensure the personalization data is saved properly by navigating to personalization iview.

Source system - DSO-1 - DSO-2 - Cube (Performance improvement)

Hello ppl,
If I have a data flow like written below:
Source system --> DSO-1 --> DSO-2 --> Cube
Situation is:
1.     Data load from source system to DSO-1 is full and can not be changed to delta itu2019s the restriction.
2.     Amount of data flowing in DSO-1 is in millions daily (because it is full and growing).
3.     Currently all DTPs in between source system and cube are maintained as full.
Requirement is to improve performance, is it possible to make DTPs as Delta after DSO-1. Since I am deleting all records from DSO-1 and its PSA daily not sure if it will work? If yes how ?
Any suggessionsu2026
Regards,
Akshay

DTPs delta is -->request based delta from write optimized DSO.The DTP should have the delta option selected.
DTPs delta is -->request based delta only also for standard DSO.
You will find initialization option in DTP on the execution tab(select DTP as type delta in extraction tab).
Now since you will be doing init from DSO so system will also give you option to select table of DSO for extraction:
i.e. Active/Changelog.
You can select Active if you are using Write optimized DSO and Changelog if you are using standard DSO for DSO 1.
Now coming bact to your case,using write optimized DSO will definately enhance the performance as you don't have to activate the request..but I have recently had a very bad experience with write optimized DSO regarding delta.
So I dont' trust write optimized DSO for pulling delta from it.
if you want to use it ,test it as much possible before using it . I would still go with standard(the beauty of changelog table).
Now regarding DTP ,once you load the the data from the DSO you can load init information even after the load.Else load the first request from dtp w/o data transfer for init and then run deltas..both will work fine.Its a similar option present in infopackages called "init without data transfer".
Refer this thread ,a really nice discussion in this :
BI7: "Delta Init. Extraction From..." under DTP Extraction tab?

Source System mapping for BW configuration transport

I create a data model mapped to the testing source system i.e DEV201 but the configuration source system is DEV200.
Now i am about to transport the BW configuration to BW-QAS , I am wondering if I have to assign the data model to the config. source system(DEV200) or i can created a transport request attached to DEV201 ?
Is there any concern on this ?

Hi,
I'm not clear your system landscape. Do system landscape like that:
BWD (BW development) --> DEV201
Now you want transport all objects to BW_QAS with connected to DEV200.
If this is true, you do like this:
- On BW_QAS: create source system (DEV200). Maintain conversion of source system after transport (Original: DEV201; Target source system: DEV200).
- After that transport your modeling from BWD to BW_QAS.
Hope this helps
BR
TRUC

Source system mapping for transport

We just create a change request for an InfoSouce. Now we transport this change request from DEV system to TEST system. But when this change request was imported on TEST system, got the "Method Execution" red error which can be checked through STMS in log. The red error msg is "Source system A does not exist", where A is our R3 DEV server. Actually we need the source system B which is R3 TEST server in the InfoSouce transported into BW TEST system, but the problem is that the change request was created on BW DEV which uses A as Souce System in the InfoSouce, then how to make the InfoSouce has B on BW TEST after the transport?
Roberto gave an answer (see my another post: What should BASIS do for an InfoSource transport for Souce System change?) as below:
"you have to set the source system mapping in your target system in RSA1, Transport Connection -> F8 and then import your request again !"
But he said this setting would be done at the target or TEST system. I don't think it's right, this mapping setting should be done at the DEV system since our transports are created in DEV Transport Connection, am I right?
Please verify who is right?

hi Kevin,
let's refer to sap's doc
'bw and transport'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
p. 33
'.. make sure to set the source system mapping configuration in each <u>target system</u> to convert the transfer rules ..'

Transport managment, source system changed in import

Hi all,
i faced with the need to change the source system in transport management. I mean, dev source system to assign a different test system source. now is the following:
InfoPackage ZPAK_4MSK400H4M9FGMEKV9ZGDSN4M, source system LGDCLNT300 changed by source system LGTCLNT010 in import (tr STMS).
I'm looking for opportunities to change the target source systems LGPCLNT010.
Where can I find a setting to change the source system during the import?
Thnx.
PS LGPCLNT010 source system already exists in test. only need to assign LGDCLNT300 (DEV) -> LGPCLNT010 (TEST).

Hi,
The entries are maintained in table RSLOGSYSMAP. Goto SM30 put the table name and click on maintain.
Or simply goto transport connection from RSA1 and click on "Conversion button" on tool bar.
Regards,
Durgesh.

Transport of Source System assignment for a Virtual Cube

Similar Messages

Maybe you are looking for