Transport of Transformation failed with RC= 12 and job: RDDEXECL cancelled in Target sytem
Gurus,
When i am importing the workbench request from dev to qty.
I am getting error : Program terminated (job: RDDEXECL, no.: 22321300).
Transformation contains only Endroutine.
Job log:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server xxxxxx were synchronized
The internal session was terminated with the runtime error UNCAUGHT_EXCEPTION (see ST2
Job cancelled.
When i see the dump it is througing errror at the method of following class.
CL_RSO_TLOGO_PERSISTENCY-CHECK_INITIALIZED
Could you please help. Thanks in advance.
Ashok
Hi Ashok,
In QA use program "RSTRAN_ROUT_RSFO_CHECK" to check and remove any inconsistencies for the transformations. After that again transport those transformations in new TR and import in QA.
Also you have to search "Transport of Transformation failed with RC= 12 and job: RDDEXECL canceled in Target system" by Dinesh Tiwari.
Check the reply of Fun Sébastien in http://scn.sap.com/message/13795238#13795238.
Similar Messages
-
Error in transport, ended with return code: 12, job RDDEXECL cancelled
Hi Friends,
When I am trying to import a request in a BW preproduction system, it is giving below error: However, the transport is imoprted successfully in Quality.
===================================
Program terminated (job: RDDEXECL, no.: 09222300)
See job log
Execution of programs after import (XPRA)
End date and time : 20080509092238
Ended with return code: ===> 12 <===
Job log:
Date Time Message
09.05.2008 09:22:23 Job started
09.05.2008 09:22:23 Step 001 started (program RDDEXECL, variant , user ID DDIC)
09.05.2008 09:22:23 All DB buffers of application server unix0001 were synchronized
09.05.2008 09:22:25 ABAP/4 processor: UNCAUGHT_EXCEPTION
09.05.2008 09:22:25 Job cancelled
=======================================
Kindly advice.
Thanks & regards,
Kunal Patel.Hello,
I ran a search for this error and found the following notes:
SAP Note 966234 - 70SP10: DTP transport and content error
SAP Note - 1074388 SAPBINews NetWeaver 7.0 BI Support Package 16
Check if they are relevant for your system.
Regards,
Siddhesh -
CSoap Excep Transport Http receive failed with Excp Commc_failure(100.101)
Hi Experts;
Am working with adobe forms. T-code SFP (Form Builder)
I have created a adobe form, Layout and all...
when i Activate the Form, it's not Activating and it's showing the Status information like...
Status Information: SOAP Framework error:SOAP Runtime Exception: CSoap Exception Transport: Http receive failed with Exception Communication_failure(100.101).
Please Give your Suggestions !!
Thanks
Upender.Hi wd4a Adobe community
here is another guy who has exactly the same problem trying to reproduce the example of: INTERACTIVE FORMS BY ADOBE IN WEB DYNPRO ABAP - INTRODUCTION ( http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/806cf26c-22e7-2c10-8ca3-a671648fd2ea ).
Anyone out in this world who has a suggestion?
thanks in advance ...
Stefan -
My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?
Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694 -
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Sorry I can't get the screen print to upload
It says
Mandatory Update Available
A Mandatory version of this application is available for download. Application can't continue without installing this version.
Application: Acrobat_com
Installed version: 2.0.0.0
Update Version : 2.3.0.0
Download now Quit
Release notes ( this is blank)
After selecting 'Download Now' I get the following message;
Download failed
There was an error downloading the update. Error #16820
Close -
Putting a row into a pageable cache failed with error 9 and error message
Hi Guys,
I am fetting the follwoing message when the job is scheduled.
Putting a row into a pageable cache failed with error <9> and error message <Db::put: Bad file descriptor>
I read the forum and Manoj has suggested to one of the forum member to change the size of the Pcache setting through the server manager. But I do not see the setting there. can any one please let me know where exactly I can see and increase the size of the Pcache.
ThanksHi
I've had the same problem. We know from other (more meaingful) error messages that we ran out of space for the Pageable Cache, but we've just increased it by 50GB and still get the same error.
Anyone??
Btw i don't think you there is a setting for PCache size - it will just use all the free disk you have on the drive where you have located the PCache directory.
Richard -
Win XP. Firefox 34.0.5 (latest)
The Flash Player download keeps failing with lost connection and then gives up.I am on a satellite Internet connection.
It seems to be extremely slow even when loading the installer which is only 1MB. Then when I run the installer and it starts to download the installation there are frequent messages about losing the connection and then finally gives up.
I have had problems with other software failing when I am on a satellite link. This is most likely because of the huge latency which may be taken as a link failure. Ping times are typically 800ms but can be 2000ms sometimes!Hello,
The online shim installer, which you are using actually downloads and installs Flash Player silently in the background. If your satelite connection is experiencing latency issues it could result in the failure to download. Please try the full installer posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
Maria -
Error in transport, job RDDEXECL cancelled, ended with return code: 12
Hi all,
When I am trying to import a request in a BW system from development to quality , it is giving below error:
Program Terminated (job:RDDEXCEL no:11315700) messg no:TR012
Please do needful
Thanks and Regards,
srinivas.mHi Gurus,
I have the same error "Error in transport, job RDDEXECL cancelled, ended with return code: 12" (Programa cancelado (job RDDEXECL, nº 09292900)).
I have checked all the steps that are in the "Note 1101187 - The OLAP tunnel" and they are implemented.
Find below the information about my BW system:
SAP_ABA 700 0024 SAPKA70024 Componente multiaplicaciones
SAP_BASIS 700 0024 SAPKB70024 Sistema Base SAP
PI_BASIS 2005_1_700 0024 SAPKIPYJ7O PI_BASIS 2005_1_700
ST-PI 2008_1_700 0004 SAPKITLRD4 SAP Solution Tools Plug-In
SAP_BW 700 0026 SAPKW70026 SAP NetWeaver BI 7.0
BI_CONT 703 0016 SAPKIBIIQ6 Business Intelligence Content
ST-A/PI 01N_700BCO 0000 - Servicetools for other App./Netweaver 04
I am trying to transport "Business Content (Statistics)", if this information can help you.
What can i do to solve the problem? I am finding some clue and i dont find anything. It will be much appreciated any idea to solve the problem.
Thanks in advance and kind Regards,
Manuel
Edited by: Manuel Guijarro on Oct 11, 2011 3:46 PM -
Business Rule Design Transformer fails with ORA-00001
I'm stuck with the Business Rule Design Transformer Utility of Headstart. After running this utility over one BR it is impossible to run it over other BR's because of violation of the unique constraint HST65.QMS_MSP_PK (table QMS_MESSAGE_PROPERTIES). The problem is that the utility tries to insert a record (message, specified in the Notes property of Designer) into QMS_MESSAGE_PROPERTIES with the code "ABI-10000", that was already created by running the utility for the first time.
Exact error message: "Activity aborted with ORACLE internal errors.
-1 ORA-00001: unique constraint (HST65.QMS_MSP_PK) violated"
I'm using Designer 6i (6.5.52.1.0) and Headstart 6.5.1.3
If someone has any clue about this I would be very grateful
Cheers,
DimceJan,
The name of the business rule is already in the CONSTRAINT_NAME of the QMS_MESSAGE_PROPERTIES table.
I already tested by deleting the records in the two tables, QMS_MESSAGE_PROPERTIES and QMS_MESSAGE_TEXT, and ran the utility, but it didn't help either. I can run the utility for one rule, but when I want to run it again at some later point, it fails with this error.
But, I managed to create rule definitions using the HSU Create Business Rule Design Definition, rule by rule. I only had to add references in the business rule to the used module.
Dimce -
Transport request migration failed with return code 12
Hi ,
A transport request was created to capture deletion of bex query via Tcode RSZDELETE. The deletion TR was moved to Quality box successfully and query got deleted. But when same TR was moved to Production box, TR failed with return code 12. Program terminated (job:RDDEXECL). Upon checking the job log overview for this job, runtime error ITAB_DUPLICATE_KEY happend causing session to terminate. can anyone pls suggest me how to fix this issue and why this has caused. Need to fix this immediately as it is in production environment. Please help.
In ST22 i could see the below error details:
Thanks,
Vishnuas per the dump, system is trying to insert a unique number which is already in the system. You sure the transport is only for deletion of the query? Can you please check the import logs in the test system and should tell you what action performed during import.
-
Scheduled Web Intelligence report fails with ORA-01013 and WIS 10901
Hi,
the environment I'm working in is BOXI R2 SP4 on a Solaris 10 server using WebLogic running against Oracle 9i database.
I have a report written by one of the users. In SQL Viewer the SQL detailed is two joined Select statements. Each time this report is either scheduled or refreshed is fails with an ORA-01012 and WIS 10901 error.
I am of the understanding that this failure relates to the fact that the 'Limit Execution Time To;' value is being exceeded.
I also understand that this value is infact divided by the number of Select statements present, and that each Select statment is them allocated an equal portion of this value.
If any of this is incorrect please correct me.
I therefore have two questions
1. As such would I be correct in assuming that in my scenario where 2 Select statments are present and where the execution limit is set to 30 minutes, that each Select has 15 minutes to complete, and that if either fails the ORA-01012 and WIS 10901 error is generated.
2. Also would this error message get generated as soon as the first failure occurred, or would BO initiate a cancellation of the SQL by Oracle, ORA-01012, only when the final request has either succeeded or failed.The queries are not executed in parallel but in serial. So the total execution time configured will be for all the Select statements in the report combined.
As for your second question, since the execution is not parallel hence BO will not initiate any error message until the total execution time exceeds the defined limit. This could be during the execution of first select statement or the second.
Try executing the queries directly in database one by one and see how much time they are taking.
- Noman Jaffery -
Console errors "Verification failed with 1 errors" and when Deleting Overrides
Hi Guys,
When trying to delete an override for a unix server I was prompted with this error:
Note: The following information was gathered when the operation was attempted. The information may appear cryptic but provides context for the error. The application will continue to run.
: Verification failed with 3 errors:
Error 1:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA refers to an invalid sub element Filter.
Error 2:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=ef78d342-5a82-d629-224d-2e476003f6e1,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=ef78d342-5a82-d629-224d-2e476003f6e1,LanguageID=ENA refers to an invalid sub element Filter.
Error 3:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=06522f67-c195-2dfa-c310-a0134b961fc4,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=06522f67-c195-2dfa-c310-a0134b961fc4,LanguageID=ENA refers to an invalid sub element Filter.
: Element Info with Identity DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA refers to an invalid sub element Filter.
I then exported the MP and manually deleted the Override but when I try to import it I get the same error.
I have also checked a couple of other unsealed MP and some are also affected.
I have gone through the MP XML can find no matches for any of the references. Is there a way (powershell or SQL query) where i can identify what these references are or how I should proceed to troubleshoot this issue?
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.Hi Yan,
That was my understanding about the error also but there are no entries for:
ef78d342-5a82-d629-224d-2e476003f6e1
a27e1d14-8ad4-56fb-da46-0c0994054e92
06522f67-c195-2dfa-c310-a0134b961fc4
in the management pack at all.
What also is curious is that the errors refer to "LanguageID=ENA"
but the only language code present inside the management pack is ENU.
The fact that there is no ENA language pack and that there are no references matched leads me to believe
that this issue is not due to this MP its references in another.
</LanguagePack>
<LanguagePack ID="ENU" IsDefault="false">
<DisplayStrings>
There are also about 14 reference management packs this MP uses and those MP would also have a handful each which makes it difficult to troubleshoot.
Unfortunately deleting the MP isn't an option as there is a significant amount of configuration saved in it.
Any ideas on how I could identify theses references?
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Restarting the db fails with PRKP-1001 and CRS-0215
Hi,
i have a 2 node RAC, restarting the DB is not starting both the instances. only one instance is started.
PRKP-1001 : Error starting instance inst1 on node nodexyz1
<nodexyz1.vip>:IP:<ip address> is already up in the network (host=nodexyz1)
<nodexyz1.vip>:IP:<ip address> is already up in the network (host=nodexyz1)
CRS-0215: Could not start resource 'ora.rac.inst1.inst'.
the above error is not consistant.... in the above case it started inst2 and failed to start inst1...
when i tried a couple of times... its failing to start inst2 and starting inst1 with the error against VIP on node2.
Even restarting the CRS did not solve the problem.
Thanks
Kranthi.CRS socket become stale which refuse the connection from srvctl command.
1. as oracle: srvctl stop nodeapps -n <node>
2. as root: crsctl stop crs
3. as root: rm /var/tmp/.oracle/*
4. as root: crsctl start crs
this way new socket will be created and instance 2 on node 2 start properly via crs and srvctl command. -
Cs5 help sign-in always fails with valid email and password
Adobe cs5 master collection Community Help's sign with a valid email address and password always fails.
"Adobe Community Help
An Unexpected Error has occurred. Please try again later.
[OK]"I also have another problem.
I also get a lot of (all?) errors during update of master collection cs5. when I look at the page describing the error, it's an upsell or saying that I am not qualified for it (was before).
something's wrong.
copied my %APPDATA% to a backup drive (wanted to keep my settings, maybe it's a mistake with adobe?)
uninstalled cs5 with deactivate
wipe and reinstall of windows (format, but not on th edrive that most of adobe was on)
copied appdata on backup drive back to %appdata% (restore)
reinstalled adobe to same place on f: drive
went into dreamweaver or AE and did help, update. consistently fails.
AAM has full access through my antivirus firewall.
I am suspecting leftover files, or it's something in my %APPDATA%.
I have a backup of the adobe registry I can apply, but not sure this is a good idea.
sorry I was not more complete. I can supply log info if someone can tell me how.
I used to apply manual updates to get the updates, but I stopped that since that tends to break the update process (AAM).
Adobe After Effects CS5 10.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Bridge CS5 4.0.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe® InDesign® CS5 7.0.4 update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later. -
We've had routine OS updates fail recently (weeks apart)
on both an iPad mini and a 5th Gen iPod. The devices ended up in recovery mode
and we had to Restore them to factory defaults.
That is bad enough, but it gets worse...
We started iTunes, plugged in the bricked device, and were
prompted to do a Restore. Clicked OK. It ran for a while, completed the
extraction step, and the failed with unknown error 3014.
We searched support, and there is plenty written about
unknown error 3014 when doing a Restore. Most point to network connectivity
issues and things like blocked ports or conflicting security software. Sure, I
can see how those could cause problems that may be outside Apple’s control
(although doing everything over HTTPS would eliminate the issue.)
BUT, iTunes has built in network diagnostics (Help ->
Run Diagnostics… -> Network connectivity tests). Shouldn’t these tell me if
there is a connectivity problem with iTunes? The support articles all seem to
tell you to manually dive into all kinds of low level things such as hosts files.
iTunes network diagnostics all passed, but out of
desperation, we still tried shutting off our anti-virus (Avast) and firewall
(Comodo), connecting directly to the internet without our router blocking or
filtering anything, editing the hosts file, trying a different PC, etc. as
instructed. It was all a wild goose chase – nothing helped, and Apple’s
instructions exposed us to security risks (attaching directly to the Internet
with no router, firewall or ant-virus software!)
I can’t be 100% sure because I still had our anti-virus
SW and firewall turned off, but what seemed to finally work was to just try
dozens of times until iTunes and Apple’s servers finally worked!
After dozens of tries on two PCs over two days, the last
thing I did was to turn off our anti-virus and firewall again, started iTunes,
plugged in the device, attempted a Restore when prompted, retried when it
failed. Then closed and reopened iTunes while leaving the device attached, and
Restored when prompted. That one time, we got lucky and it worked. I’m sure
many people really have blocked ports, etc. but I can’t see how that could explain
our problems. Hopefully this posting will help someone.
** Apple – If you’re reading this ** Please (1) find out
why we and others in the forums report persistent 3014 errors that seem to
magically go away if you retry often enough over a long enough period of time,
and (2) make sure the iTunes network diagnostics are truly thorough, and then
direct customers to them rather than making them dig through port mapping
settings and hosts files. Thanks for your consideration.
This is a terrible user experience – Please address this!
A few of the refs I found:
http://support.apple.com/en-us/HT201413
http://support.apple.com/en-us/HT203875
http://support.apple.com/en-us/HT202944
https://discussions.apple.com/message/20645785#20645785P.S. Here is a copy of one of our update logs that iTunes optionally sends back to Apple when a failure occurs, etc. (We let several of these be sent in) There are several errors near the end, including an "Internal error"
iPodUpdater 1 2015-01-01.log
2015-01-01 21:42:12.948 [7316:1c4c]: restore library built Oct 7 2014 at 14:24:11
2015-01-01 21:42:12.948 [7316:1c4c]: iTunes: iTunes 12.0.1.26
2015-01-01 21:42:12.948 [7316:1c4c]: iTunes: Software payload version: 12B440
2015-01-01 21:42:12.948 [7316:1c4c]: iTunes: Using MobileRestore state machine
[02:42:23.0846] Changing state from '(null)' to 'Restoring'
[02:42:23.0846] requested restore behavior: Erase
[02:42:23.0861] requested restore behavior: Erase
[02:42:23.0861] requested variant: Erase
[02:42:23.0861] requested restore behavior: Erase
[02:42:24.0532] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[02:42:24.0532] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 085DB3E0 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0548] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 085DB938 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0548] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 085DB6B0 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0548] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 085DB308 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0548] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 085DB278 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0548] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 085DB350 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0548] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 085DB110 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0548] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "ftap" not part of manifest, skipping
[02:42:24.0548] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "rfta" not part of manifest, skipping
[02:42:24.0563] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "ftsp" not part of manifest, skipping
[02:42:24.0563] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "rfts" not part of manifest, skipping
[02:42:24.0563] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 085DB1A0 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0563] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 085DB7D0 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0563] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 085DB4B8 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0563] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 085DB5D8 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0563] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 085DB668 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0563] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 085DB740 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0579] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 085DB428 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0579] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 085DB1E8 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0579] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 085DB470 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0579] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 085DB500 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0579] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 085DB6F8 [7253907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[02:42:24.0579] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 085AD430 [7253907C]>{length = 20, capacity = 20, bytes = 0xb4a53a00140f136ddf267a31b6d37652a4452586}
[02:42:24.0579] amai: AMAuthInstallRequestSendSync: SSO function returned NULL and no SSO token was provided, SSO disabled.
[02:42:24.0704] amai: tss_submit_job: HttpEndRequest failed=12031
[02:42:24.0704] amai: AMAuthInstallRequestSendSync: failed tss submission: Internal error
[02:42:24.0704] amai: AMAuthInstallApCreatePersonalizedResponse: server request error: Internal error
[02:42:24.0704] amai: AMAuthInstallBundlePersonalizePartial: failed to create ap ticket
[02:42:24.0719] failed to personalize the restore bundle: Internal error
[02:42:24.0719] AMRAuthInstallDeletePersonalizedBundle
[02:42:24.0782] Restore completed, status:3014
[02:42:24.0782] Failure Description:
[02:42:24.0782] Depth:0 Error:Failed to copy preflight options during recovery mode restore.
Maybe you are looking for
-
Link to open swf in Flash player
I am pretty new at flash and I have been slowly learning the do's and don'ts of actionscript. I have a problem that I can't seem to figure out. Basically I'm trying to open an SWF file inside my current flash presentation, so basically you click a bu
-
ITunes music playlists no longer syncing with iPhone on iOS 7?
I have the latest version of iTunes, and iOS 7.1, but my playlists have not been synching with my device since iOS 7! I have tried completed disconnecting all music synching, then turning on a few playlists at a time, but nothing works. I have a few
-
IPod wont sync podcasts.
My iPod 5th Gen. Will not sync recent pod casts. For some reason in the past it placed them in Audio Books, but now it wont carry them over at all. Any ideas? Colin
-
10.6.5, 10.6.6 Kernel Panic
I sat out 10.6.5 because it would cause a Kernel Panic soon after I slept the computer, or thereafter after every startup. Unfortunately, 10.6.6 is showing the exact same problem. The machine will start, and run normally, then after 2 minutes, or 10
-
Where can I find the 'club' database sample used in the 'Information Design Tool' tutorials?
Hi experts! I have been studying the tutorials for the Information Design Tool (http://scn.sap.com/docs/DOC-8461) and in some of them they use a database called 'club'. For what I see, this is an Access 2007 database and has some tables called City,