Transport of Value Mapping ?

Hi,
I know that if I create a Value Mapping (inside ID) with Agencies equal to a Business System, then I will be able to transport it from DEV to PROD...
But <b>what's happen if AGENCY used in the Value Mapping is NOT a Business System</b> (e.g Agency = My_girlfriend)?
Can be able to transport the Value from DEV to PROD?
or how to do it?
Regards
Mickael
Message was edited by: Mickael Huchet

Hi,
This thead discussion may help you-(if you did not see)
Export/Import the mapping value used in Value Mapping Function
rgds,
moorthy

Similar Messages

How to achieve transport of value mapping replication cache table values ?

During the migration of our interface from XI3.0 to PI 7.11,
I need to transport the value mapping replication cache table values present in cache monitoring of runtime workbench in
XI 3.0 PRD to PI 7.11 DEV .
Please let me know the ways to acheive this so that I can have the same values present in PI 7.11 Value Mapping Cache table as maintained in XI 3.0.
Please point me into correct direction.
Regards
PS

Click on "Tools" option, select "Export Configuration Objects" -> "Individual Objects" -> Choose the "Value Mapping Group" type, and then select the value mappings you want to transport.

Transport value mapping

Hi,
I wonder if it is possible to transport a value mapping from Dev->Qa->Prod or if I have to remake it in each system?
Best Regards
Claes

Actually, you can transport the value mappings you defined in the Integration Directory. You can find them under Tools -> Export Configuration Objects, select 'Individual Objects' and type 'Value Mapping Group'.
The difficulty is that, if you did not define a group name for your mapping, you will only see object IDs here.

Value Mapping Transport Problem

Hi All,
I hv some value Mapping Values in my XI Devvelopment system while i am transporting these values to the XI Quality System all Development values are able to transport but,some values are duplicating.aferter that
In XI Production System newly added values are not transported eventhough imported Sucessfully.
I was tryed two transport systems i.e CMS & File System.
Plz, help me to solve this is....
Thanks
Mahesh

Hi Mahesh,
while value mapping make sure that u refresh the run time cache
in value it uses another table that which helps in value mapping
make sure that even that table is imported if any doubt pls chk this link
value mapping uses values from the cache so you can you value
mapping replication for your purpose - but you will not
see those values from ID
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
/people/sukumar.natarajan/blog/2006/10/23/accessing-value-mapping-defined-in-directory-using-java-functions
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
if found worth pls do reward points
Thanx
Sampath
Edited by: venkata sampath on May 29, 2008 11:15 AM

Transporting Value Mapping

Hi All,
We would like to Move our Value Mappings that have been maintained in DEV to QA system using Export / Import.
Has anybody tried using Export / Import to Move the Value MAps. What is the way to achive this movement of Value Mappings from DEV to QA.
Thanks
Arun

Hi,
Have a look into this thread-
Export/Import the mapping value used in Value Mapping Function
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/content.htm
Hope this helps,
Regards,
Moorthy

Issue with Value Mapping table

Hi
I want to upload a external value mapping table to XI.
I do not want to code for it on the SAP R/3 side. and there might be more than 2000 value mappings. so can we upload a external mapping table.
Is it possible?? if yes, then how??.
Thanks
Nikhil

XI 3.0
Hi,
first of all one helpful information:
You can see all data of the value mapping tables using the
runtime workbench: Go to the IntegrationBuilder->
Integration Monitoring->Cache Monitoring, select 'Search
for Value-Mapping' and choose your context.
The value mapping tables are located in the J2EE part of
XI. You have to send your value mapping data to an Java proxy
located in the J2EE part. First, the inbound proxies
(synchronous and asynchronous) need to be activated.
There are two urls, named in the docu, you have to call
from a web browser:
(asynchronous replication scenario)
http://<Server>:<Port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous
(synchronous replication scenario)
http://<Server>:<Port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication
You only need to perform this step once (for each
installation).
If you already have a sender for the mapping data, the
next step is to configure the scenario in the directory
Create a communication channel with
Adapter type: XI
Transport protocol: HTTP 1.0
Message-Protocol: XI 3.0
Adapter-Engine: Integration Server
and host name and http port of the XI J2EE Engine and Path Prefix: /MessagingSystem/receive/JPR/XI
The user XIAPPLUSER has the required permissions.
For an asynchronous communication you can use the
inbound interface ValueMappingReplication from the namespace http://sap.com/xi/XI/System.
In that namespace there are also outbound interfaces you
can use to generate a sender proxy and synchronous
interfaces for the same purpose. Set the created communication channel as the receiver channel.
You may need a mapping and so on depending on your
sender. If you use the provided outbound interfaces there
is no mapping required.
The Data:
You can create your own GUIDs using some function like GUID_CREATE in ABAP. You don't need to declare the context you use. Something like http://mycompany.com/Test should be ok.
A sample in ABAP:
CRM and R3 are the names of the business systems.
data: lcl_value_mapping type ref to co_svmr_value_mapping_rep,
        ls_value_mappings type svmr_value_mapping_replication,
        ls_item type svmr_value_mapping_rep_item,
        lcl_system_fault type ref to cx_ai_system_fault.
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123548'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'FormOfAddress'.
ls_item-identifier-agency = 'CRM'. <- Business System A
ls_item-identifier-value = '2'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
ls_item-operation = 'Insert'.
Use the same guid for another value of the same group
ls_item-group_id = '315286378563858425463215845123548'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'FormOfAddress'.
ls_item-identifier-agency = 'R3'. <- Business System B
ls_item-identifier-value = '1'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
create object lcl_value_mapping.
try.
      call method lcl_value_mapping->execute_asynchronous
        exporting
          output = ls_value_mappings.
      commit work.
    catch cx_ai_system_fault into lcl_system_fault.
      write: 'Error: ', lcl_system_fault->errortext.
endtry.
See the XI documentation at SAP XI Design and Configuration Time -> Configuration -> Value Mapping -> Value mapping Replication for Mass Data.
Hope that helps.
Regards,
Christian

Value mapping to excel sheet

Hi experts,
we want to download the details of value mapping in excel sheet .
Can you give us this solution.
regards
durai

Hi Durai,
Go through the following links to get an overview:
Transports value mapping tables
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/frameset.htm
https://www.sdn.sap.com/irj/sdn/elearn?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/190eb190-0201-0010-0ab3-e69f70b6c257
I think they may help you.
Regards,
Jyothi.

Value Mapping Replication - 7.31

hi,
      working on a requirement of value mapping replication on 7.31 environment.
       I have used the standard - ValueMappingReplication service interface as the receiver as it is an async scenario.
       My sender structure is similar to the ValueMappingReplication. I am using a SOAP UI to hit the PI server. I have downloaded the WSDL from the ID and used it as a request.
So it is basically a soap sender ( from SOAP UI ) to SOAP Receiver - async. - I am using Transport Protocol - HTTP and Message Protocol - X13.0
I have registered the URL -http://<Server>:<Port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication (for the asynchronous replication scenario)
--- how do i hit the Java proxy servlet ? to update the data on PI runtime cache?
- wht url should i use ? -/MessagingSystem/receive/JPR/XI/http://<Server>:<Port>/ - is this correct ?

Hello,
Use this URL in SOAP receiver channel
http://<host>:<port>/MessagingSystem/receive/JPR/XI
Thanks
Amit Sriavstava

Defaulting transportation zone value while creating the consumer in shop

Dear Experts
i have a requirement where i have to default the transportation zone value as "0000000001".
when ever a new consumer is created in the webshop when it flows to r/3 it must contain trasnportation zone value as "0000000001"(defaulted) could you tell me how can i achieve this i tried to default the value using the transaction varient which doesnt solved my problem
Thanks & Regards
V.Srinivas

Srinivas,
Did you check if your reference customer in the webshop has the same transport zone ? Once done, check if the answer in this thread would help you.
Reference Business Partner Data mapping to Consumer Master data
Thanks!
Surya.

Import conversion data table from SAP R/3 into value mapping table in XI

Hi:
    Somebody knows how to import a table with conversion data that are in SAP R/3 and to take it to a value mapping table in XI?
    The purpose is to use a mapping table that can change in the future. Must I use a ABAP programming that retrieve data and build the value mapping table?
    If so, how I specify in the ABAP programming the group id, the scheme, the agency and the corresponding value?
    Please, help me.
    Regards!!!

Hi David,
please refer to this section in the help: http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
There is an interface for mass replication of mapping data. The steps you need to carry out to use this are:
+Activities
To implement a value-mapping replication scenario, proceed as follows:
       1.      Register the Java (inbound) proxies.
To do so, call the following URLs in the following order in your Internet browser:
¡        http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication (for the asynchronous replication scenario)
¡ http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous (for the synchronous replication scenario)
You only need to perform this step once (for each installation).
       2.      Application programming
The ABAP program must perform the following tasks:
¡        Read the value mapping data from the external table
¡        Call the outbound proxy used to transfer the data to a message, which is then sent to the Integration Server
       3.      Configuration of the replication scenario in the Integration Directory
This involves creating all the configuration objects you need to execute the scenario successfully. One special aspect of the value-mapping replication scenario is that the receiver is predefined (it must be on the Integration Server). The sender, however, is not predefined in the replication scenario and can be defined to meet your individual requirements.
For example, you can use the shipped ABAP proxies.
In the case of the receiver communication channel, choose the adapter type XI. Ensure that you configure a channel for the Java proxy receiver in this case.
Enter the path prefix /MessagingSystem/receive/JPR/XI for this purpose.
+
Regards
Christine

Partial match for Value Mapping in Import Manager

Hello Experts,
We have a import map which is used to do mass insert of data into the main table. This is done as & when required by the end user.
We have a qualified lookup field which has a flat lookup filed as the Non-Qualifier. This flat lookup field is refering to a Lookup Flat table, which has mulitple dispay fields like Code,Name, Status etc. (14 fields in total) where as only the Code is the unique field.
We have only the unique field in our source file which we use for the import. Since we have only a part of the display fields in the source, the automap functionality in the Value maping section doesn't work. It becomes very tedious for the user to manually map all the values for this field.
Is there any way by which we can convert the source or target values in the import map, so that we can map the values using the Automap feature?
Your help & suggestion for alternate approach is highly appreciated.
Thanks in advance.
Regards,
Uday
P.S. We are using SAP MDM 5.5 SP6.

Hi Uday,
No need to enable remote key mapping for QLT. Please execute the below steps(stated with an example) -
1. Among all the fields in the referenced lookup table, identify the lookup fields and the tables they are looking up .
For eg.If you have a lookup field as 'Country' as one of the fields, look up table will be 'Countries'
2.For the identified lookup tables, set 'key mapping =Yes' in Console.
For eg, For Country Lookup table ,set Key mapping to 'Yes'
3.Import values into Lookup table (Import manager)/ Remote key update -
In import manager, select source (local file) and destination as Countries flat table.This Table will be haing 2fields - Code and description.Clone the 'Code'field and map it to Remote key field in destination hierarchy.Map code and description to equivalent destination fields. Select 'Code' as matching field > Perform import into lookup table.
Check if the records in countries table are updated with remote keys(in Data manager> right click on a record> select 'Edit key mappings' > view key mapping for the record)
3.Import to Qualified table/Auto value mapping -
Now, in the import map for qualified import , map the source field and destination field (of lookup type), all the values of this field will automatically map.
Similarly, refresh remote keys mappings for all the lookup tables first and then you can see auto mappings of values happening for the lookup fields.
Regards,
Vinay M.S

Value Mapping Insert Error

Hi
I am sendind an item value mapping from R3 to XI and I get this error:
<ns:ValueMappingReplicationFault xmlns:ns="http://sap.com/xi/XI/System">
- <standard>
<faultText>A value is missing for content of Identifier in item 0.</faultText>
- <faultDetail>
<text />
<id>7</id>
</faultDetail>
</standard>
- <addition>
<ItemNr>0</ItemNr>
- <Item>
<Operation>Insert</Operation>
<GroupID>037dd9b01a3111da8abef522ac127968</GroupID>
<Context>http://sap.com/xi/XI</Context>
<Identifier scheme="BS_PEPE" agency="Company" />
</Item>
</addition>
</ns:ValueMappingReplicationFault>
The code in R3 is this one
REPORT Z_XI_REPLICATE_VALUE_MAPPING.
data: My_ZCO_MI_CONSULTA_SERIAL type ref to
                CO_SVMR_VALUE_MAPPING_REP_SYNC,
      in type SVMR_VALUE_MAPPING_REP_RESP,
      out type SVMR_VALUE_MAPPING_REPLICATION,
      vIdentifier type SVMR_VALUE_MAPPING_IDENTIFIER,
      vItem type SVMR_VALUE_MAPPING_REP_ITEM,
      vItemLst type SVMR_VALUE_MAPPING_REP_TAB,
      vList type SVMR_VALUE_MAPPING_REP_LIST,
      lo_sys_exception   TYPE REF TO cx_ai_system_fault.
try.
    create object My_ZCO_MI_CONSULTA_SERIAL.
    vIdentifier-scheme = 'BS_PEPE'.
    vIdentifier-agency = 'Company'.
    vIdentifier-value = '122'.
    vItem-Group_id = '037dd9b01a3111da8abef522ac127968'.
    vItem-operation = 'Insert'.
    vItem-context = 'http://sap.com/xi/XI'.
    vItem-Identifier = vIdentifier.
    append vItem to vItemLst.
    vList-item = vItemLst.
    out-VALUE_MAPPING_REPLICATION = vList.
    call method My_ZCO_MI_CONSULTA_SERIAL->EXECUTE_SYNCHRONOUS
      EXPORTING
        output = out
      IMPORTING
        input = in.
CATCH cx_ai_system_fault INTO lo_sys_exception.
    write: /'Error Text   --> ',lo_sys_exception->errortext.
    write: /'Error Code   --> ',lo_sys_exception->code.
    exit.
ENDTRY.
write: /'ESN_STATUS --> ',in-STATUS.
The message sent to XI and I see in the sxmb_moni in R3 is this one
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:ValueMappingReplication xmlns:nr1="http://sap.com/xi/XI/System">
- <Item>
<Operation>Insert</Operation>
<GroupID>037dd9b01a3111da8abef522ac127968</GroupID>
<Context>http://sap.com/xi/XI</Context>
<Identifier scheme="BS_PEPE" agency="Company">122</Identifier>
</Item>
</nr1:ValueMappingReplication>
When I try to delete a Group it works but not when I want to insert an individual item.
What am I doing wrong?
Thanks
Regards

Hi
There is a field call CONTROLLER with this structure:
FIELD     FIELDNAME     CHAR     30     0     Field Name
VALUE     PRX_CONTR     CHAR     1     0     Field Control in XML Data Stream (=> Type Group SAI)
But in SAP documentacion does not say any references to this field and how to fill them.
I am asbolute sure I filled all the mandatory fields.
Thanks
Regards

Value Mapping in Import Manager

Hi All,
I have Probelm while loading data to MAIN TABLE through Import manager,I am getting XML file from Legacy System in which legacy sends State Code like NM (for New Mexico) .In my region table I made Name and Code as display field .Created my Import map ,when ever new value comes for region value mapping is not working ,I tried changing my region table with code only display field it works ,but I want Name also display field .
Note : all my lookup table Remote key mapping Enabled
Is there any way we can acheive this or am I missing some thing here .
Thanks,
Madhu

Hi Madhu,
to achive this:
1. First go to the table where you are maintaining the region codes.
2. Enter the region code there and then go to the import manager by connecting to the source file.
3. go the region field map by opening the map.
4. go to value mapping pane and select unmap.
5. then select Automap and check the that your region code added manually is mapped with the source file.
6. You may see some unmapped source values, map it to Null values at destination.
7. Save the map.
8. This shoul enable the import for you.
if you want to avoid the manual mapping everytime, you should be getting all the region codes once and import/update it in the data manager as a one time job.
Then you avoid steps 1 to 3 everytime and carry out the remaining steps to import the records.
Hope this helps resolve the issue.
Thanks
Rahul

Mapping multiple source value to one target value in value mapping

Hello experts,
In my scenario, i need to map more than one source value to one target value in value mapping. Like:
1        TenderPickup
2        TenderLoan
7        TenderPickup
101     TenderPickup
102     TenderLoan
107     TenderPickup
But when I enter the same target value for the second time and try to save it, it gives me an error saying value mapping already exists.
But this should logically be allowed. How can this be done. Please provide a solution.
Thanks,
Yash

Hi Prabhu,
When i right click on the target field, it gives me only 3 options:
1) Insert Row
2) Delete Value Mapping
3) Value Mapping in all agencies
I dont see nay option for duplicating rows.
What I hae done is in ID i clicked on TOOLS and then VALUE MAPPING. I checked the option "Value Mapping Agencies" and gave my source and target agencies detials. Then i clicked on DISPLY and in the next page I have 3 columns - Value for <source agency>, Value for <target agency> and Group name.
When I give duplicate values in the column Vlaue for <target agency>, it doesnt allow me to and if i right click in this column, i get the above mentioend options.
Please point out where i m going wrong.
Thanks,
Yash

How to read Group ID from Value Mapping Context in Cache Monitoring ?

Hi friends,
    In RWB --> Cache Monitoring --> Integration Server (Java) -> (Search for Value Mapping Groups) in this each item is identified by Value Mapping Group (GroupID, Context, Identifier/Agency, Identifier/Scheme). Either we create Value Mapping Table in ID or replicate value mapping data directly from text file/SAP table etc., in run time cache, data will be identified in this manner.
    Now, our requirement is to delete a record the Cache for a particular context. Two operations provided by XI one is 'Delete' and another one is 'DeleteGroup'. When we use either of this, we should know GroupID. Suppose, I replicated some large amount of data from my text file in Runtime Cache. Value Mapping Table is like that IN --> India, US --> USA, AU --> Australia, EG --> Egypt. Now, I am required to write a program to get the input country code from user which is going to delete in the value mapping table like IN/AU.... For this, what logic we should follow in the program is, First we scan the value mapping table and find the record (country code) which is match with the input. Then find the GUID value for this record. Now we use the DeleteGroup Operation and pass this GUID and then delete the record.
    So, in essence, how to read the GUID from value mapping context.
    Friends, Kindly help me to do this.
Thanks in advance.
Jegatheeswaran P.

Did you get the way to read group id?

Transport of Value Mapping ?

Similar Messages

Maybe you are looking for