Transport Organizer SE10: perform transport of copies

Hi,
I would like to make a "transport of copies" from production system to development system. I collected my objects in a "standard" transport request via RSA1 -> Transport Connection. Then I created a "transport of copies" request in SE10.
So I now have the standard request and a second transport of copies request where I set the development system as target system.
I now need to move the collected objects to this transport of copies request but couldn't figure out how to do this...
Thanks for your help!

Hi,
please perform steps below, some you already covered:
Transport from PRD to DEV
1. First collecte it in a workbench TR in Production. and release this request.
2. Now create a TR as "Tranport copies request" in SE10 . This is 3rd type of TR apart from Customizing TR and Workbench TR.
3. Include the components of TR released in first step into the TR created in 2nd step.
4. Now go to edit mode for TR created in step 2, specify the DEV system Logical name as the destination for this Tr.
5. Now release this TR. And if you refresh the STMS in DEV you can get it in the list. So import it.
So keeping in mind your steps already done: you need to release the first transport (copy the number because you need it at step 3). Then in step 3 you go to the transport of copies request and there is a 'include objects' button/icon in the menu bar. You click this and then paste your copied transport number and the objects will be included. Follow up with further steps.
Hope this helped,
regards
C.

Similar Messages

  • Requested deleted in Transport Organizer

    Hi,
    How can we find out request deleted in Transport Organizer (SE10). Is there any table or log which possess the request and the person who deleted the request.
    Thanks.

    Dear Rakesh,
    We just can find only modified ,released ,released from starting requests in Transport organiser,
    I suppose we cant find the deleted requests and person responsible in BW side.
    The Basis people may help u in this issue as they maintain dumps of what has been loaded and deleted on a timely basis..Please do contact basis People.
    Assign points if needful.
    Best Regards,
    VVenkat.

  • Transport Organizer: Released Request back to Modifiable status

    Hello Colleagues!
    It's possible to change an already Released Request back to Modifiable (Transport Organizer: Requests TC SE10)?
    If not, what is the workaround?
    Many thanks in advance!
    Regards,
    Jochen

    I was cleaning up abandoned work from other developers, had deleted all the objects in a task, and meant to delete the task itself, but out of habit hit the Release icon.  I wanted this task gone, so I wrote this program.  It worked to reset the task status and then I was able to delete the task. 
    *CAUTION: Use this program only for a similar situation.  Any misuse is your responsibility, not mine. 
    *& Report  ZE070_MOD_TR
    REPORT  ze070_mod_tr.
    PARAMETERS: p_trstat LIKE e070-trstatus,
                p_trkorr LIKE e070-trkorr,
                p_update AS CHECKBOX.
    TABLES: e070, e07t.
    SELECT SINGLE * FROM e070
      WHERE trkorr EQ p_trkorr
        AND as4user EQ sy-uname.
    IF sy-subrc EQ 0.
      SELECT SINGLE * FROM e07t
        WHERE trkorr = e070-trkorr.
      WRITE:/ e070-trkorr, e070-trstatus, e070-as4user, e07t-as4text.
      IF p_update EQ 'X'.
        WRITE:/ 'Changing status from', e070-trstatus, 'to', p_trstat.
        e070-trstatus = p_trstat.
        MODIFY e070.
        COMMIT WORK.
        IF sy-subrc EQ 0.
          WRITE:/ 'Record updated'.
        ELSE.
          WRITE:/ 'Problem with record update'.
        ENDIF.
      ELSE.
        WRITE:/ 'Display only - status not changed'.
      ENDIF.
    ELSE.
      WRITE:/ 'No entry found for task/request', p_trkorr.
    ENDIF.
    End of Program ***

  • How to transport organization model

    Hi Experts...
    how to transport organization model from development server to testing server in CRM FUNCTIONAL MODULE.
    Thnx..

    Hi ,
    Refer to this thread:
    [Transport of Organization Structure;
    Cheers, Satish

  • Aggregation level ZFI_FINGL is locked by the Change and Transport Organizer

    Dear,
    After transport from a dev to prod system I get this message on the planning modeler :
    "System is not set to changeable - objects are not changeable
    Aggregation level ZFI_FINGL is locked by the Change and Transport Organizer"
    Do you know how to fix it ?
    Thanks in advance,
    Thibaut

    Hi,
    By default the planning modeller configuration is added to the standard BEx transport (if it is not saved in $TMP). If there is not one set up then create one in the admin workbench transport connection.
    If you don't use this, then you can add the objects you wish to change manually into a transport before you change them - this also works.
    Cheers
    Mark

  • Aggregation level  is locked by the Change and Transport Organizer

    Dear All,
                   I have created aggregation level in the planning cube and transported to Production from dev, Once i transported to production i am not able to change the aggregation level in Dev, and also aggregation level is Inactive.  Aggregation level YPNC2 is locked by the Change and Transport Organizer. Please suggest how to activate the aggregation level in Dev.
    Thanks
    Christopher

    Hi,
      Kindly check the following,
    1. Is your aggregation level transported properly to the production system ?
    2. Was your aggregation level active while you were including it in the transport request ?
    3. Did you properly include the aggregation level in the request?
    If you find that the answers of all the above questions is "YES", then there should not be any problem in your aggregation level.
    Hope this solves your issue, if not kindly get back to me.
    Regards,
    Balajee

  • CMS-Transport Studio: Link Transport Organizer is disabled

    Dear Experts!
    When I using Change Management Service- Transport Studio, I see that the link Transport Organizer is disabled with information
    " Change and Transport System not configured for the selected Track" , I already config CMS and TMS as the document guide.
    Please help me resolve this problem.
    Thanks all.

    Hello Thao
    The situation looks more like an configuration issue, very
    probably caused by the error concerning the name of the RFC destination
    (note 1003674): Please ensure that the destination is named
    'sap.com/com.sap.tc.di.CTSserver', with only capital 'CTS', but
    completedly small 'server' at the end.
    Thanks
    Kenny

  • CTS+ - Transport Organizer Web UI

    Hi,
      I am trying to configure CTS+ for our landscape with Solman (Stack 15) as the Domain Controller.
    I have not added other transport groups yet. But I am not able to get to the Transport Web UI through
    STMS -> Environment -> Transport Organizer Web UI
    If I directly type in the URL I can see it:
    http://<host>:<port>/sap/bc/webdynpro/sap/cts_browser?sap language=EN&SYSID=<SID>&APPLICATION=OTHERS
    Any ideas?
    Thanks
    S.

    Hi Shabnam,
    Recently I got this problem. Previously, I managed to get the screen from STMS. Now, I have type the URL directly.
    Any idea?
    Rgds,
    Hapizorr Rozi Alias

  • Delete request in transport organizer

    If I accidentally collect many unwanted infoobjects in the request, so i need to delete the request in transport organizer. Now I can only delete the info object one by one. If there a feature that i can select all of them and delete all?

    Go to SE03 --> under folder Requests / Tasks --> dbl click on "Unloak Objects (Exper tool)"
    from the next screen, enter Request no and execute..
    unloack all requests that u want to delete. (childs requests and then parent request).
    Thnen go to SE09 --> delete those requests, which were unlocked

  • Searching for screen exit in Transport Organizer

    Hi all,
    I'm searching for a possibility to add an additional tab to the Transport Organizer with some additional fields. Is there any enhancement / screen exit available for this kind of extension without the need to modify the SAP standard?
    Thanks in advance for any comment!

    Hi MWALT,
    I did some searches on transactions th Transporte Organizer and is not possible to do what you need, unfortunately.
    Well, what I recommend you to do, is call a online program in the enhancements existing, perhaps can be a solution this problem.
    Best regards,
    Rafael Sá

  • Deleting modifiable SE10 request/transport

    Dear Forum,
    One of our developers made by mistake a transport request (se10) in our Q/A environment /should have been Dev system), and she would like it removed/deleted again. I would say it is ok to delete the modifiable request in Q system (garbage can) as long that it hasnt been released. but i would like your opinion.
    Best of my knowledge we wouldnt end up having any locked objects as long the reuqest hasnt been released. It is in status modifiable.
    Any replys will be greatly appreciated
    thanks in advance!
    kind regards,
    Soren

    Hi,
    If any objects are stored in TR first remove them and delete the request.Check the target system of request in properties tab and change if it is Production , make sure it is not released .
    Thanks and Regards,
    P.Bharadwaj

  • What is the URL for CTS+ transport organizer Web UI?

    Expert:
    Would you please help? Thanks!

    Hi ,
    The Transport Organizer Web UI can be called via the following URL: 'Protocol'://'server':'Web AS Port'/sap/bc/webdynpro/sap/cts_browser?SYSID='SID of Development System as Configured in TMS'
    Regards,
    Chetan Poojary.

  • Transport type when copying transports to other system

    Hello,
    probably a simple question. I have to transport couple transports from one system to another, there is no link between the systems.
    I have created one (mass) transport which include objects of these transports, but I am not sure what type of the transport should I choose (transport of copies, relocations (it is not clear to me)), also I do not want to release the one big transport to Q systems transport queue. I just want it to create the cofiles to move to other system.
    So question will be how to copy this one transport (via cofile, data file), or if it is possible to release transport without target system?
    Thanks in advance
    Martin

    Hi,
    Please ensure that STMS is configured in your system, since it is a stand alone system you can make it as a Domain Controller also. After that goto transaction se10 and check for the transaction which are in modifiable state. Then relese the transport starting from the inner request corresponding the transport request created by you.
    Note that once you release this trasaction data files and cofiles are created in trans directory, and you have to manullay copy these files to the system in which you want to transport these files.
    After that goto transaction stms_impot in the target system and add this transport request and import it. the data in the transport reuest will qutomatically gets imported the.
    Thanks
    Rattandeep

  • Transport Best Practices - Cumulative Transports

    Hi All,
        I am looking for a some sort of authoritative guide from SAP on ECC Transport Best Practices, especially around merging/combining/accumulating multiple transports into fewer ones. We are a very large project, but we haven't figured out the CVSs like ChaRm so we still deal with individual transports.
    The reason I am asking this is that we some development leads on our project that insist that ALL transports that leave Development system must be imported into Production.  They claim this the SAP best practice.  An SAP consulting review of our system also left a vague note that "We are orphaning transports". This could mean that 1. either we are not importing all the stuff that leaves Dev system 2. or we are not keeping track of our code changes across all environments. Proponents of "All transports must get to PRD" are interpreting this as "1". 
    I have my team cumulate transport for subsequent changes into newer transport and only take the newest Transport to Production.  The continuous rolling of old Transport into new one using SE01 "Include Objects" options ensures that all changes part of current development are in a single TR. Fewer transports mean fewer housekeeping across all systems, and less chances of something going out of sequence or missed out. This is for Workbench Transports only. I understand Config transports could get a little tricky with rolling in.
    If you can't point me to a link, what is your take on "Send everything to Prod" vs. "Combine changes into fewer Transports"?  I can't think of any software packaging methodology that suggests putting everything, including some junk/crap, into production build. I have looked at SAP enhancement packs, SPS, and Notes. I haven't found any evidence of  SAP including older buggy code in what it releases to its customers.
    Thank you all!

    Jānis, Christian,
        I think we are all on the same page.  Let me clarify my specific scenario a little bit more.
    We are about 15 ABAP developers team, for production support. We don't do huge changes. Our code updates are mostly limited to a handful of objects (average 2 - 5).  We often have multiple iterations to same objects. For large scale development objects, this approach may not work very well. Those should really utilize SolMan or other CVS tools.
    Here is How I have my team putting together final transport.
    step 1. Change is done to object X. Transport #1 created and released after standard checks.
    step 2. More change is needed for object X.  Transport #2 Started.  Transport #1 is brought in using SE01 include objects at the main task. Changed objects are in lower tasks. This way, I can tell what was brought over, and what really changed this time.  Releases of the Transport #2 inspects all objects and insures all objects from #1 are included in #2, and that there are no other changes between #1 and #2 to any of the objects.  This is very easy check mostly from Version History.
    Step 3. More changes needed to object X and Y. Transport #3 started.  Transport #2 brought in at main task. Same check from Step 2 is done to ensure no other changes exist.
    step 4....6. Step 6 ended at Transport #6.  All changes verified in QA system.
    Only the Transport #6 needs to be sent to Production since previous Transports 1 to 5 were rolled into #6.
    Jānis, the deletions will be covered automatically just like standard SAP.  No special manual steps needed.
    Christian,
       The transport of copies works in similar way.  Only thing different is that the Main/cumulative transport is released at very last, possibly after QA tests have been confirmed.
    I had thought about doing Copies vs. cumulative.  I preferred to go with having Transport in QA already at the time of approval. I would have hard time explaining to our client why a Transport was released out of Dev After all tests were done and signed off.
    However, the Copies have advantage that intermediate versions or parallel changes of same objects are easily recognized upfront vs. us having to check each transport before release.
    Jānis,  the "copies of Transport" also creates extra versions in version history just like manually adding objects in a transport. 
    My quick analysis between copies and cumulative only came with one different that 'copies' have a different flag/attribute in Table E070.  I am sure the flag means something to SAP, but for versioning history, it makes no differences.
    Regardless of if I cumulate or not, based on your experiences, have you come across notion that everything that leaves Dev must get to PRD as SAP Best Practice? What would your reply  be if someone insists that is the only way to move code to production?

  • Transport process chain by transport connection step by step

    Hello expert:
              how to transport process chain by transport connection step by step?
    Many thanks,

    Go to RSA1 -> Transport Connection.
    Make sure Only Necessary objects is selected under Grouping.
    Expand Process Chain -> Click on Select Objects -> Search for the process chain you want to transport.
    Select it and click transfer.
    When finished collecting - Click on the Red Truck. Create a transport request when prompted to create a request.
    Then go to SE10 or SE09 -> Find your request and right click and select release on your transport request as well as the task under it.
    After it is released you can check the log by clicking on the log button and see if your transport moved successfully to target system.
    Good Luck.
    MP.

Maybe you are looking for