Transport Parameters for FTP1.0
While defining Communication Capability of a Remote trading partner i am confused what to put in these fields of Transport Parameter fields,i am using FTP1.0 transport protocol.Please comment on importance of these fields.
Transport Parameter Values :
Name Current Value
polling interval 60
base directory
sender cipher suites
receiver cipher suites
sender channel mask None
receiver channel mask None
receiver proxy host
receiver proxy port
receiver proxy username
receiver proxy password
receiver proxy auth type
receiver control port
receiver data port
receiver regular expression
receiver read only
receiver read ordered
receiver read ordered timestamp source
receiver read ordered timestamp format
receiver read ordered timestamp offset
Hi
If you are trying to direct the outbound message to a local box (UNIX box) then it would be better to use the File 1.0 transport.
For FTP you need to give the following information when creating the Transport Server
Hostname - the hostname or ip address of a machine which has an FTP Server running.
Username -
Password -
Apart from this, you need to populate the endpoint. This would be the directory into which you want the message to be put on the FTP Server machine. Note that the path would be relative to the directory into which the user is logged in during ftp session.
The polling interval needs to be set for the Host Trading Partner Delivery Channel, but this has a default setting of 60 seconds. No other FTP parameters are needed to be changed under a simple scenario.
I dont think the Status as disabled is being used by B2B. I checked in my environment and this also shows all endpoints to be in disabled status whereas these are working fine. Please ignore this column.
For File and FTP you need to create your own endpoints.
I have given some sample scenario case in the Thread : Re: [URGENT]Internal Delivery Channels of B2B
[URGENT]Internal Delivery Channels of B2B
Message was edited by: akthomas
Similar Messages
-
Editing the Parameters for Transport Application
Hi all
we are trying to import portal object into portal.we are getting the message
"Root directory for import not found: Check the transport application configuration"
please lt us know how can we edit the Parameters for Transport Application and where?????????
Regards
zaidHi,
You need to change the pcdStartup.properties file.
This file is the place where settings for folder like import and export are defined.
Please have a look
Re: portal transport import question
http://help.sap.com/saphelp_nw04/helpdata/en/10/082840f3ddee01e10000000a155106/frameset.htm
Thanks,
Sekhar -
Transporting Control Parameters for Actual Data in Profit Center Accounting
Hi Friends
Transport type of control parameters for actual data in Profit Center Accounting has been mentioned as Manual, when I try to manually create the Transport Request the Transport option in the Menu is disabled. Is there any other way to transport this configuration.
Regards
P RajanHi
I think the settings that you are mentioning is through transaction 1KEF please clarify. Else elaborate where you have set the transport type manual.
Transport request are the domain of Basis people and is meant for transport from one client to another like quality to production.
Anand -
Transport request for Set Control Parameters for Actual Data.
Hi Viewers,
I am unable to create the transport request for the below settings
Controlling->Profit Center Accounting->Basic Settings->Controlling Area Settings->Activate Direct Postings->Set Control Parameters for Actual Data.
Is it possible to move the request through transport request or do we need to create the settings directly in the target system.
Thanks
Aswin.Hi,
Please read the IMG help at the given path. There are certain profit center accounting settings which cannot be transported directly from the same path, but there is another node in SPRO path for doing this. If possible I will try to locate the path but I am not sure I can post it immediately as I am not having system handy.
thanks,
Kumar -
Obligatory transport target for business system BS_DEV in SLD
Hi all,
We are moving receiver detrmination from QA to PRD, there we are getting one error
"com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination BS_DEV
>>> * *: Obligatory transport target for business system BS_DEV not found in Sys
>>>tem Landscape Directory caused by: com.sap.aii.ib.core.transport.api.PostprocessingException: Import
>>>failed because of business system transfer of object Receiver Determination BS_DEV
*: Obligatory transport target for business system BS_DEV not found in Syste
>>>m Landscape Directory caused by: com.sap.aii.util.hmi.api.HmiMethodFault: caused by: ClientServerEx
>>>ception exception:Import failed because of business system transfer of object Receiver Determination
>>> BS_DEV * *:Obligatory transport target for business system WP
>>>C_Dev not found in System Landscape Directory caused by: com.sap.aii.ib.core.transport.api.Postproce
>>>ssingException: Import failed because of businesssystem transfer of object Receiver Determination
>>> BS_DEV * *: Obligatory transport target for business system BS_
>>>DEV not found in System Landscape Directory"
I am moving the same object from development to production, i feels ther is some problem in setting transport target.
BS_DEV target system is BS_QA, in development sld
BS_QA source system is BS_DEV anf target system Is BS_PRD in Quality sld
BS_PRD source system is BS_QA, in production.
The above error occurs when we are moving same object which i moved from development to quality to production.
whether i need to take obejct from quality and need to move that one to production, or i can use the same development object to production...?
Regards
Pradeep P NHi,
Even I am facing the same problem.
we have given the Transports Target as mentioned, but still facing the same error:
Deployment
Transport request : DPIK900141
System : QPI
tp path : tp
Version and release: 375.30.25 710
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://sqnpi1.sap.sgroupit:51600
Double-stack system QPI
Deploy for XID
Deploy File = 2f8021d0f9ca11dea81e001a64925608
Start of Web service log
Deploy Service called with following parameters:
CommunicationData-Type:1
CommunicationData-Address:http://sqnpi1.sap.spoolzgroupit:51600/dir
CommunicationData-Host:sqnpi1.sap.sgroupit
CommunicationData-Port:51600
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:1
Deployable-Id:/usr/sap/trans/data/DPIK900041/2f8021d0f9ca11dea81e001a64925608
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination DPI SI_POS_CH_SN
Returncode:'8'
Deployment
End date and time : 20100105151741
Ended with return code: ===> 8 <===
Can anyone guide to solve it. -
How to log input parameters for Function Modules?
Hi,
I need to create a Logging system to trace input parameters for function modules.
The log functionality could be done by developing a class method or a function module (For example 'write_log'), and calling it within each function module that I want to log. The 'write_log' code should be independent from the interface of the Function Module that I want to log.
For example, I'd like to write a function/class method that can log both these functions modules:
Function DummyA
Input parameters: A1 type char10, A2 type char10.
Function DummyB
Input parameters: B1 type char20, B2 type char20, B3 type char20, B4 type Z_MYSTRUCTURE
Now the questions...
- Is there a "standard SAP" function that provide this functionality?
- If not, is there a system variable in which I can access runtime all parameters name, type and value for a particular function module?
- If not, how can I loop at Input parameters in a way that is independent from the function module interface?
Thank you in advance for helping!check this sample code. here i am capturing only parameters (import) values. you can extend this to capture tables, changin, etc.
FUNCTION y_test_fm.
*"*"Local Interface:
*" IMPORTING
*" REFERENCE(PARAM1) TYPE CHAR10
*" REFERENCE(PARAM2) TYPE CHAR10
*" REFERENCE(PARAM3) TYPE CHAR10
DATA: ep TYPE STANDARD TABLE OF rsexp ,
ip TYPE STANDARD TABLE OF rsimp ,
tp TYPE STANDARD TABLE OF rstbl ,
el TYPE STANDARD TABLE OF rsexc ,
vals TYPE tihttpnvp ,
wa_vals TYPE ihttpnvp ,
wa_ip TYPE rsimp .
FIELD-SYMBOLS: <temp> TYPE ANY .
CALL FUNCTION 'FUNCTION_IMPORT_INTERFACE'
EXPORTING
funcname = 'Y_TEST_FM'
* INACTIVE_VERSION = ' '
* WITH_ENHANCEMENTS = 'X'
* IGNORE_SWITCHES = ' '
* IMPORTING
* GLOBAL_FLAG =
* REMOTE_CALL =
* UPDATE_TASK =
* EXCEPTION_CLASSES =
TABLES
exception_list = el
export_parameter = ep
import_parameter = ip
* CHANGING_PARAMETER =
tables_parameter = tp
* P_DOCU =
* ENHA_EXP_PARAMETER =
* ENHA_IMP_PARAMETER =
* ENHA_CHA_PARAMETER =
* ENHA_TBL_PARAMETER =
* ENHA_DOCU =
EXCEPTIONS
error_message = 1
function_not_found = 2
invalid_name = 3
OTHERS = 4
IF sy-subrc = 0.
LOOP AT ip INTO wa_ip .
MOVE: wa_ip-parameter TO wa_vals-name .
ASSIGN (wa_vals-name) TO <temp> .
IF <temp> IS ASSIGNED .
wa_vals-value = <temp> .
ENDIF .
APPEND wa_vals TO vals .
ENDLOOP .
ENDIF.
ENDFUNCTION. -
Error: ORA-16778: redo transport error for one or more databases
Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry -
Error in scheduling parameters for production orders
Hi Guys,
Greeting for the day u2026u2026u2026.
I am trying to create production orders creation for own order type ex MM01, but I am getting error message as u201C scheduling parameters are not defined for the order type u201C even though I have maintained following parameters as below,
Production scheduler -
xxxxx,
Detailed scheduling -
check box of scheduling ticked,
Rough cut scheduling --- scheduling id u201301, scheduling and generate capa requi,, boxes ticked,
Adjust scheduling -- requi to operation date,
Scheduling control for detailed scheduling ---backwards and check box of auto scheduling ticked
Operation segment ---setup,
All operation in order will be reduce
Do not reduce,
Could any one light on this issue,
Thanks in advance,
MohanHi,
This error will come if you have not maintained Define scheduling parameters for production orders.
Check this order type whether linked with respective plant in OPU3.*And give production scheduler * mark ie, all.*
And in Define production scheduling profile - OPKP, link your order type in the page below.
In material master work scheduling view, input production sch profile or prod scheduler.
Regards,
Dharma -
What are the default parameters for PER_EVENTS api
Dear Experts,
Can you tell us what are the default parameters for PER_EVENTS API.Here below I have pasted the API.
procedure create_event
(p_validate in BOOLEAN default FALSE
,p_date_start in DATE
,p_type in VARCHAR2
,p_business_group_id in NUMBER default NULL -- HR/TCA merge
,p_location_id in NUMBER default NULL
,p_internal_contact_person_id in NUMBER default NULL
,p_organization_run_by_id in NUMBER default NULL
,p_assignment_id in NUMBER default NULL
,p_contact_telephone_number in VARCHAR2 default NULL
,p_date_end in DATE default NULL
,p_emp_or_apl in VARCHAR2 default NULL
,p_event_or_interview in VARCHAR2 default NULL
,p_external_contact in VARCHAR2 default NULL
,p_time_end in VARCHAR2 default NULL
,p_time_start in VARCHAR2 default NULL
,p_attribute_category in VARCHAR2 default NULL
,p_attribute1 in VARCHAR2 default NULL
,p_attribute2 in VARCHAR2 default NULL
,p_attribute3 in VARCHAR2 default NULL
,p_attribute4 in VARCHAR2 default NULL
,p_attribute5 in VARCHAR2 default NULL
,p_attribute6 in VARCHAR2 default NULL
,p_attribute7 in VARCHAR2 default NULL
,p_attribute8 in VARCHAR2 default NULL
,p_attribute9 in VARCHAR2 default NULL
,p_attribute10 in VARCHAR2 default NULL
,p_attribute11 in VARCHAR2 default NULL
,p_attribute12 in VARCHAR2 default NULL
,p_attribute13 in VARCHAR2 default NULL
,p_attribute14 in VARCHAR2 default NULL
,p_attribute15 in VARCHAR2 default NULL
,p_attribute16 in VARCHAR2 default NULL
,p_attribute17 in VARCHAR2 default NULL
,p_attribute18 in VARCHAR2 default NULL
,p_attribute19 in VARCHAR2 default NULL
,p_attribute20 in VARCHAR2 default NULL
,p_party_id in NUMBER default NULL -- HR/TCA merge
,p_event_id out nocopy NUMBER
,p_object_version_number out nocopy NUMBER
);From the menu bar, select
▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. -
What are the input parameters for Function Module
Dear Experts,
I want to generate a Sales Tax returns report,those fields are not available in my existing Datasources.
For that i want to write a Generic Datasource with Function Module.
audat
bukrs
vkorg
vtweg
spart
aurat
auart
netwr
mwsbp
kschl zedp(consition type)
kschl zvat(condition type)
ksch zcst(condition type)
matkl material group
Here what are the Input parameters for Function Module.
Thanks in Advance.
Srinivasan.Srinivasan-
For creating a Generic extractor based on a FM, you first of all need to know what is going to be your structure.. i.e. what all fields you need to pull from what all tables. A functional consultant may help you identify the exact DB tables.
Once you know them, hand over the requirement and the pdf mentioned by Krishna to the ABAP guy, he would be able to take this up further.
Also decide 1st whether you would be using a full load or delta. There is a slight difference in the way they are built.
Let me know how it goes.
-Bhushan. -
Transport request for BW queries and roles.
Hi All,
we need to craete 20 bw queries on 4 multiproviders. We need to save 18 queries as workbooks in one role and the other 2 queries in other role. Both the roles and queries does not exist and will be created in Developement environment.
We just want to know how we can transport them in the quality environment. What is the right method to transport them.
Can we transport all the object queries, workbooks and roles in number of transport requests so that if few queries or workbooks needs any changes then we do not have to transport all objects just the request which includes the changed objects.
Thanks & Kind Regards,
HardeepThanks a lot for all of you for your quick response. But i still have questions.
If we create one transport for roles and one transport for each query then we will be having 21 transport requests. But the transport request on same multiprovider can lock the clacuated key figures and restricted key figures, if they are present in more than one query, it means they will be present in more than one transport requests, so they can be locked and trasport request will be failed.
If i just create one transport request for all the objects roles, quaries & workbooks it will not loack any object, and transport request will not fail. But i have to transport all the objects again if i need to change one of the queries.
Please let me know if there is a method that i can divide my queries as per multiprovider and can create transport requests as per multiprovider so that we can not lock calculated keyfigures and restricted key figures. Is workbooks can be published in the role in the same transport request. If it is and if in more than one transport request we are publishing the different workbooks to the same role, will it lock the role. -
Parameters for opening PDF files in a browser
I read some of the posts about making a text link from an html page to a specific location in a pdf document in the browser. I set up the parameters, as I understand it, according to the document "Parameters for Opening PDF Files." The result from my test took me to the top of page 1, not to the bookmark on page 3 that I specified. See the link below. What is wrong with the parameters?
http://www.tabardtheatre.org/YPASCfolder/2012/SummerYouthProgram2012.pdff#page=3&bookmark= anniejr
You can also go to the website: http://www.tabardtheatre.org/audition.html and click on the text link (in blue).The PDF Open Parameters do not contain the option to link directly to a bookmark, as was mentioned, but I've developed a script that can add this functionality to your files. Have a look here, if you're interested: http://try67.blogspot.com/2011/06/acrobat-link-to-specific-bookmark-in.html
-
Best practice tunning parameters for tunning ADF apps?
Hi all,
I am tuning our 11g ADF app for around 3 billions (can be up to 10 billions records) and the concurrent connections up to 100. The app is running on a 16 core Intel chip and 8GB of RAM. The Weblogic used Rockit JDK. Any one have this experience please share and help me! I am considering what is the top ten crucial parameters for this tuning. Up to now I just have tunned some parameters from OS layer to app layers:
- indexing for queries
- open cursors, processes and pga memory
- share pool for app module and jdbc pooling.
- heap size of JVM memory only max value 1024 because of 32 bit Windows (Perhaps I must upgrade to 64 bit OSs to use more memory)
The app was tested with Jmeter with only 10 concurrent connection and the test case is logging in and query and logging out. It ran very slow. I found out that the weblogic server did not use CPUs equally (only 1-2 CPus were used)
Thank you and best regards.
Elton Son.Hi,
maybe this of interest:
http://download.oracle.com/docs/cd/E12839_01/web.1111/e13814/toc.htm
http://download.oracle.com/docs/cd/E15523_01/core.1111/e10108/adf.htm#CIHHGADG
http://www.oracle.com/technetwork/articles/systems-hardware-architecture/tuning-adf-t-series-168445.pdf
http://andrejusb.blogspot.com/2009/08/oracle-adf-tuning-preventing-sql-query.html
Frank -
I'm looking for a list of parameters for qt media player?
I'm looking for a list of parameters for qt media player?
I was looking for Apple's list of quicktime parameter embed tags attributes. Fruitless search through Apple Support, however I Googled and found the information I was looking for. Thanks for contacting me.
-
Parameters for substr and dbms_lob.substr
The syntax for substr in SQL functions and for the function in dbms_lob package is not matching and hence confusing for programmers. It will be less confusing if parameters for both functions are of the same order.
In Sql functions the the syntax for substr is substr(string, offset, amount)
In dbms_lob package the syntax for the substr function is dbms_lob.substr(lob_loc, amount, offset)
MohanI think he wants to send a suggestion to Oracle via this forum.
Maybe you are looking for
-
How to chante the PDF File Name in Broadcasting
Hi Team, Could you help me?, I am in a project where the customer need the Following requirement with the PDF File Name in the Broadcasting: I am configuring one distribution Job in Broadcasting configuration Tab this Job need send a report via
-
Dropping WiFi Connections after new Mac Min and Upgrade
First of all does anyone know why this discussion was archived when there was never a solution posted? https://discussions.apple.com/message/12586041?tstart=0#12586041 Secondly (why I found that thread among many others addressing the same probl
-
Move iPhoto/iMovie libraries to external drive
I would like to move my iphoto library to an external drive and not have all the pictures on my iMac (drive is filling up). I would like to do the same with iMovie if anyone knows how to do it.
-
[VOD_46] Error
HELP! I'm at the end of my rope here and I'm hoping someone might be able to help. Here's my issue: Over the weekend I put through an order to remove my HBO subscription and pick up the movie package (starz, showtime, etc.) This morning I turned o
-
Printing many checks on a single sheet
Is it possible to print more than one check on a single piece of paper? The requirement is just to print cheques, and not provide address details or remittance details. has anyone done this before? Is there some logic that will stop this?