Transport problem in Report Designer

Hi,
I have a Bex Report Designer report. But when I am transporting this object from Development to quality , the report comes with the following error.
Please see below for errors.
I can see the transport went well. I can open the same report in quality.
when I am going to quality system and creating the same report it's working fine.
Please let me know what I am doing wrong while transporting.
Components 4823EL8W2XELE3W6RRSM1WQ7E (version A) do not exist on the database
DP_1: Unable to load query 4823EL8W2XELE3W6RRSM1WQ7E
Web Item Report error: Cannot access data provider 1 "DP_1"; it does not exist or cannot be read
No access to the data provider or data provider does not exist
Cannot access data provider 1 "DP_1"; it does not exist or cannot be read
Check whether this data provider exists and can be read
Contact your system administrator. This error was recorded
Thanks,
Panda

Hi,
Please check note 964823.If this does not resolve please check if Either your system is support package stack 7 or the role entry was saved before support package stack 8. In case your system is still on support package stack 7, please see note 935348.
In any case, the role entry is broken and you need to delete the entry and store the entry again (either on SPS7 with the note applied or on SPS8).
Rgds
Manoj Kumar

Similar Messages

Problem with Report Designer

Hi Gurus,
I am unable to create new report, when I want to insert a dataprovider in Report designer I have the following errors.
An error occurred in the BI components on the SAP J2EE Engine.
What i have to do now
please suggest me
Thanks in advance
Prashant

Hi, Prashant,
I have the same issue, how about your apllication now?
can you share with me?
Thanks,
Sam

Problem with adding a new InfoProvider in Report Designer

Hey experts,
I have a problem to add a new Infoprovider in Report Designer. I get the following message:
Query consists variables. Please use a query view (variables are filled).
Can anyone tell me what the problem is.
Thanks in advance.
Best Regards
Ali

Hi Ali,
Note 931838 describes this issue.
Best regards,
Janine

BI 7.0: Report Designer / WAD Front-End Problems

Hi, We are on SAP Netweaver, BI 7.0 SP05, Stack01.
I have installed New SAP Front-End GUI Components,I dont have any problems executing queries in Web or BEx using Business Explorer 3.X.
I'm getting following errors when i try to execute with new version of Business Explorer.
1) Report Designer: Query XML is empty (BICS), please check query and portal setup.
this query works fine in BEx with New version as well.
2)Web Application Designer: "E002: Error while executing service RRXWS_WEBPUB_CALL_SERVICE:V for object 1()".
I couldnt execute simple web template in browser, when i click execute in browser, it open my local windows SAP directory.
Is there any setting or configuration files i should change?
i searched in OSS notes for these kind of errors, but i couldnt not find any
please let me know as its urgent.
thanks in advance..
Deepak Kunavarapu

Hi,
we're running NW2004s, BI 7.0 SP06.
I'm now testing the new Frontend-Tools and started with the Query Designer. Installed Patch 2, Revision 227. I created an new query and saved it. So far so good. After executing i get this error message:
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 11:02_16/02/06_0017_46228450
See the details for the exception ID in the log file
Do I need the integrate an platform_add_on? Does someone get the same errors?
Thanks in adavance.
Benjamin Herrmann

Report designer - inserting problem

hi,
we want to use report designer for formatting reports. When we insert
query to report then following error occurs: internal error
ID: E-CREATEFROMQUERY and message: reference to object is not set to
instance of the object. When I go through this errors and execute
this report to web I get this error: Web Item Report error: Tag "band"
with name "footer1": Tag "keyfigure": Nested tag "y" must not
be empty. Have you any solution for this problem?
Thanx

Hi,
I mean frontend SP 12 (is already released). You can stay on your SPS in ABAP, Java. Frontend is compatible with older backend.
Regards, Karol

Report design Grouping problem

I'm currently designing a report, something like an invoice. The invoice number is usually on the page header. But now i want to create a report to list down all the invoice numbers in the 'details' but when i drag the 'invoice number' data to 'details'
it only show 1 row of numbers, wheareas the data has few rows of it. How can i make it view all my numbers?

Hi Eugene,
Thank you for posting in MSDN forum.
Since this forum is discuss the VS test issue, so
I’m afraid that it is not the correct forum for this issue.
As you said that the report design grouping problem, I suggest you could try to consult this issue directly to the VS Report Controls forum:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols , maybe you will get better support.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem Exporting to PDF from Report Designer 2008

When I export my report from Report Designer unless I deselect the "Create Bookmarks from group tree" I get the following error: "Failed to export the report" If I deselect the option It will successfully create the PDF.
I am running Crystal Reports 2008 with service pack 2. I also have Microsoft Visual Studio 2008 loaded on the machine.

You should start debugging by removing parts of the report to determine what is causing the problem. Once you find that part then re-post with a question on how to work around the problem.

Reporting designer - problem with insertin query

hi, I have problem with inserting query into reporting designer, when i do it there occurs metadata error and the system write check query, but query is ok, there are no variables. Have you any idea whats the problem.
thanx

I had a similar problem after "upgrading" to SAPGUI 7.10, except my failure was in the BEx Analyzer. (We are still using BW 3.5 SP 18.)
The solution I found was in SAP Note 1039191 which addresses this problem for both the Analyzer and the Query Designer, and includes a revised "wdbsPres.dll" file as a workaround. After downloading and installing this file, the problem was resolved.
BTW, I have asked SAP when this will be fixed in a future FEP, but they have so far only given me a very ambiguous reply suggesting that I try it on another PC.
Hope this helps...
Bob

Changes not reflecting in Report designer after Transports

Hi,
I have made some changes to a Report in the report designer and transported it to Quality and Acceptance systems. But the changes are reflecting in Quality system not in Acceptance server. In Acceptance sever the changes are seen in the report physically but when i execute the report i still see the old format. I tried transporting the request again to the system but no luck.
Cleared the Cache in Acceptance still no luck. Also regenerated the base query in RSRT and no effect on the report. Any idea?
Thanks,
Praveen

Hi Praveen,
Make sure you have collected all the objects of the report.
You may check this in (development) RSA1->Transport Connection. Select that report and see if any objects are still not under $TMP or under any other Package and not got collected in your previous TR.
Regards,
Pratap Sone

Report designer Query Transport issue!

Hello ALL,
Iu2019ve created a formatted report in Report designer the basis of which is a query developed in Query designer. Now the issue is Iu2019ve captured the query developed in Query designer by going to RSA1Transport connectionQuery Elements, but Iu2019m unable to capture the report designer query i.e when I try to search with this RD query name it says query does not exit.
Can someone please help, how I can transport this Query developed by Query designer.
Regards
Madhavi

Hi,
let me know the solution?
as i know , need to save and activate? and refresh in RSA1. you can find out your object.
regards.
Ram

Report Designer Problems

Hi all,
I have two questions when I run BEx Report Designer:
1. For InfoProvider or query with Chinese characters, I can't insert Data Provider into Report Designer. The error message is "Server does not return query metadata Check the query". For English-based InfoProvider or query it works.
2. When I insert a query into Report Designer and execute it, it pops up another error message as following:
Version number of report is too high
This report Web item can display reports with version number 2.1 or lower. This report has version number 2.2
To display this report, use a newer version of the report Web item
Contact your system administrator. This error was recorded 
The BW is version 7.0 with SP12 and the BEx is SP12 with Patch1. Please help on these issues if you have any idea. Thanks very much.

Please check the deployment of BI Java.
The message corresponds to a Report Item of NW 2004s SPS 9.
Reports with Version 2.2 can be processed by Report Item SPS 10 and higher.
Report Designer checks the BI SP number (ABAP). You have to make sure
the BW server and the Portal are in sync regarding the SPS. I assume the BI SP was 10 or 11 when the Report was saved. However the Portal was not upgraded when the Report was run.
NW 2004s SPS 12 = BI Java SPS 12, BI ABAP SP 13/14
NW 2004s SPS 11 = BI Java SPS 11, BI ABAP SP 12
NW 2004s SPS 10 = BI Java SPS 10, BI ABAP SP 10/11
hope this helps, akrim

Report Designer problem

Hi Experts,
I am trying to open a query in report designer tool in new GUI. but it showing following error.
"Query(view)definition cannot be retrieved from portal.
please try again or check query and portal setup"
"Exception in method process function"
I am not able to work with any of the queries for report designing.
Help me out of this please
Thanks in advance
kalyan

Make sure the BEX Web set up for the JAVA stack is done as per oss note 917950.
The Report Designer require the Portal runtime on the JAVA Stack.
Thanks.

Report Designer missing 'group level' area - GUI problem?

Hi all -
I have a few questions here that I think are related, so I'm posting in one thread.
1) As far as what I've been reading on, we can upgrade to BI 7.0 even with a front-end SapGUI 640 (patch 19). True or False?
2) One can only use Report Designer with SapGUI 710. True or False?
And here's a long one...
3) When you open Report Designer should we see "Group Level" on the right-hand side (if it's checked to show)? Mine (having sapgui 710 at patch 1) was showing just the ruler, but not the "Group Level" areas... is this a gui issue? What's the fix?
[my history of GUI install:
Before upgrade: Sap GUI 640 patch 8
After upgrade: Installed NW4s BEx components only
(then getting dumps in the r3 back-end) so installed SAP GUI 710 from 50083078_4 cd.
Report Designer missing the group level areas... I thought, might as well install patch 01. But that did not help.]
Any input would be great!
Thanks guys (and girls!)!
Cheers...

1) As far as what I've been reading on, we can upgrade to BI 7.0 even with a front-end SapGUI 640 (patch 19). True or False?
True
2) One can only use Report Designer with SapGUI 710. True or False?
False
3) When you open Report Designer should we see "Group Level" on the right-hand side (if it's checked to show)? Mine (having sapgui 710 at patch 1) was showing just the ruler, but not the "Group Level" areas... is this a gui issue? What's the fix?
I had a couple issues to 710 with the report designer. i didnt had anything similar to ur issue, but all my default and specifics of format catalog were blacked out and not allowing me to change that. I downgraded to 640 and everything works fine now. (I tried installing all possible latest and greatest on the GUI but nothing worked and it costed me a whole day to acknowledge the fact)

Bex Report Designer is not previewing changes in QA

Hi All,
Please help... i am getting an unusual problem with bex report designer. I have created a bex report using report designer. This was then transported in to QA. In QA i opened my created report using report designer and clicked the print version button to preview the report in PDF format. This all worked correclty, however i noticed a spelling mistake in one of the custom text fields i am using.
So i put the report in a transport in dev, made the changes in dev and previewed in dev. Everything is ok here and i can see the change i made.
After this i transported the report to QA and when i open the report in report designer to preview the data i can see in design mode that the custom text field does HAVE the change i made so it is correct. The problem i am getting is though when i preview to see in PDF format the image i get is of the old preview with the spelling mistake.
SInce i have made more changes and i can see the changes in DEV and in QA in design mode but when i preview it shows me the old image from the 1st preview.
Please can anyone shed any light into this issue.
Kind regards
Forhad

Refreshed the JAVA server resolved issue

Report Designer - Error while opening a saved report

Hi,
I am not sure if this is an authorization issue or configuration issue.
When I try to open a saved report on Report designer, I keeping getting an error: Report Version is invalid: "0".
Has anybody faced similar problem?
We are on SP09.
Regards,
Payal.

Payal,
I am afraid, that your report might be corrupted. This might have happened, if in tx SE16 the version is changed. The Report XML displayed in SE16 for table RSERDATA, is limited to ca. 1024 charachters. When editing the version, after pressing the save button, the Report XML is cut off at 1024 charachters and the report is lost.
Please do not set the report version in tx SE16!
I will need to configure the program RS_REPORT_MAINTAIN, such that reports with version "0" can be saved with the minimum version 9.0.
Until then I recommend the following procedure for Reports that are ok, but have the Version "0" bug:
1) in tx SE38, program: RS_REPORT_MAINTAIN
    open your report with option "DT" (designtime)
2) Switch to Edit mode.
    Make a backup copy of the report using the "Save As" Button.
    You can copy the Report XML to the clipboard using Ctrl-A, Ctrl-C
3a) Open a dummy report in RS_REPORT_MAINTAIN created previously with
      Report Desginer ( --> The version is set to 9.0).
      Switch to edit mode and paste the Report XML and Save.
or
3b) Debug FUNCTION rs_bex_report_load_rfc.
      Open a report and change the value of E_REPORT_VERSION to "9.0"
      before leaving the function.
Hope this helps, karim
P.S.
I will update note 1016224

Transport problem in Report Designer

Similar Messages

Maybe you are looking for