Transport problems for Z* - InfoObjects
Hello experts,
we do have a problem concerning the transport of BW InfoObjects that have been created in the namespace Z*, e.g. the InfoObject ZD_TEST. We get an error message that the object does not have a connection to the CTO when we try to change the object catalog entry.
1. Is it possible to transport Z* - Objects? (With our customer namespace /***/ everything works fine).
2. If yes, what are the necessary steps?
Thanks in advance.
Steps:
Go to RSA1 - transport connection and look for your Zobject and choose 'data flow before and after" and collect automatically. This wil prompt for transport request. IF you have any open request that is relevent select that request or a create a new one from the same pop up. The system will save the Z* to this request. Go to Se10 and release the request, if you are ready to export this object.
Ravi Thothadri
Similar Messages
-
Transport Problem - for KEDR Derivation rule
We are trying to create derivation rule through transaction KEDR without any values. After creating derivation rule, it is creating workbench transport request eventhough K9RE* table is client dependent.
We have different transport routes/groups for customizing and workbench. SAP Layer is assinged to workbench transport group with one another Z* layer.
When we are trying to create request it is creating workbench transport request eventhough it is client dependent. It is using KEG0 package which is assinged to SAP layer.
Workbench transport are not going to all clients and we have to move request manually to other clients.
What should we do for changing this behaviour?
Thanks,
Miral.With detailed explanation:
I thing previous post with was not detailed enough. Please see below.
We have created two different transport group for differentiating
customizing and workbench transport request.
ZECD layer is assigned to /CUST/ group where as ZWBK and SAP layer is
assinged to /WRKB/ group.
We are moving all client independent transports (assigned to /WRKB/
group) to only 1 client in other systems.
While creating derivation rule through transaction KEDR, it is not
allowing us to assing /CUST/ group eventhough config is client dependent.
It is using package KEG0 which is assinged to SAP layer and SAP layer isassinged to /WRKB/ group in our configuration.
The Derivation rule config is client dependent eventhough it is creatingworkbench request. We would like to know why it is creating workbench
request instead of customizing request.
Thanks,
Miral. -
Dear all,
When transporting BW objects from DEV to QA, we frequently get 8 as a return code. It seems that this situation comes from the dependencies of the different BW objects.
As an example, lets say that we have 2 transports: one containing the InfoObjects composing the structure of an ODS and the other one containing the ODS itself. We have noticed that in the first step, all the objects are imported in the QA environment. In the second step,
the method execution takes place. So when the method execution is performed, the sequence in witch the objects are activated is not always respected. As a result, we have a lot of transports ended with errors.
Is there anyone living the same kind of problem?
When we release a group of transport, is there ways to make sure that, for each transport, the sequence: import/method execution is respected?
Regards,
StephaneBHi,
When transporting in BW you have to make sure the sequence of transports.
The transport sequence i follow is,first activate all the info objects >> Data targets >> any InfoSources >> Comm Str, Update Rules, Transfer Rules >> Routines >> Queries & Workbooks etc..
Another option is go to RSA1 > Transport Conncetion, here select which ODS which you want to transport and choose Grouping option.
Hope this helps.
Praveen -
Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
GhosalHello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal -
Need help for finding objects impacted by size change for an infoobject
hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variablesHi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan -
Problem charging 0MATERIAL INFOOBJECT Hierarchy from R/3 into BW
Hi everyone,
I'm having this problem when trying to load data into this infoobject's hierarchy. The problem is that i'm recieving an information IDOC with status 8. it's message says that the table that the process is trying to get the data from in R3 is empty. but it's not telling me wich R3 table it is.
Does anyone know wich table is that?
And maybe someoneknows how to insert the hierarchy data on it?
I prefer a standard solution, but it's no problem to do a Z extractor for it. Tesource system is retail but i don't know if it really matters.
Tank-you!
Artur.Hi,
This means Hierarchy structure is not maintained by R/3 people and they need to maintain the R/3 hierarchy.
please check it out in KCh3 t.code to see the Hierarchy subculture of this.
We also got the same in RSA3 when runned for some Infoobject 0comp_code hierarchy.
Are u getting any Hierarchy while running in Rsa3 t.code or not getting anything.
Please letme know to comment on this issue.
Regards,
Anand Tej. -
Obligatory transport target for business system BS_DEV in SLD
Hi all,
We are moving receiver detrmination from QA to PRD, there we are getting one error
"com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination BS_DEV
>>> * *: Obligatory transport target for business system BS_DEV not found in Sys
>>>tem Landscape Directory caused by: com.sap.aii.ib.core.transport.api.PostprocessingException: Import
>>>failed because of business system transfer of object Receiver Determination BS_DEV
*: Obligatory transport target for business system BS_DEV not found in Syste
>>>m Landscape Directory caused by: com.sap.aii.util.hmi.api.HmiMethodFault: caused by: ClientServerEx
>>>ception exception:Import failed because of business system transfer of object Receiver Determination
>>> BS_DEV * *:Obligatory transport target for business system WP
>>>C_Dev not found in System Landscape Directory caused by: com.sap.aii.ib.core.transport.api.Postproce
>>>ssingException: Import failed because of businesssystem transfer of object Receiver Determination
>>> BS_DEV * *: Obligatory transport target for business system BS_
>>>DEV not found in System Landscape Directory"
I am moving the same object from development to production, i feels ther is some problem in setting transport target.
BS_DEV target system is BS_QA, in development sld
BS_QA source system is BS_DEV anf target system Is BS_PRD in Quality sld
BS_PRD source system is BS_QA, in production.
The above error occurs when we are moving same object which i moved from development to quality to production.
whether i need to take obejct from quality and need to move that one to production, or i can use the same development object to production...?
Regards
Pradeep P NHi,
Even I am facing the same problem.
we have given the Transports Target as mentioned, but still facing the same error:
Deployment
Transport request : DPIK900141
System : QPI
tp path : tp
Version and release: 375.30.25 710
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://sqnpi1.sap.sgroupit:51600
Double-stack system QPI
Deploy for XID
Deploy File = 2f8021d0f9ca11dea81e001a64925608
Start of Web service log
Deploy Service called with following parameters:
CommunicationData-Type:1
CommunicationData-Address:http://sqnpi1.sap.spoolzgroupit:51600/dir
CommunicationData-Host:sqnpi1.sap.sgroupit
CommunicationData-Port:51600
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:1
Deployable-Id:/usr/sap/trans/data/DPIK900041/2f8021d0f9ca11dea81e001a64925608
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination DPI SI_POS_CH_SN
Returncode:'8'
Deployment
End date and time : 20100105151741
Ended with return code: ===> 8 <===
Can anyone guide to solve it. -
Transformation transport problems when containing routine
Hi Gurus,
I'm facing a transport problem.
When i want to transport a transformation that contains routines, the transport says syntax error in routine. The routine in DEV is tested and correct. I realised, that the transport does not bring the routines. After transport, i open the transformation, and the routines contain the default routine: RESULT = .
I found some answers in some posts, but no exact answer how can i get rid of this transport problem. I don't like copy - paste into prod system with manually editing....
If you have any idea, please let me know.
Thanks
LaszloThanks for your help, it worked now, but i think it should work without owerwrite originals. Sometimes it seems that the routines is not included in the transport request, when i modify a routine in a transformation.
But thanks anyway, problem solved now -
Hello everyone :
I can't switchover to primary. following is error and information.
RHEL 6.3 x86-64
Oracle database 11.2.0.3.0 Enterprise edition
Primary database = orclprmy
Standby database = orclstby1
##### /etc/hosts on orclstby1
[root@orclstby1 admin]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.50.211 ttprmy
192.168.50.212 orclstby1
### DG broker error
DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show configuration;
Configuration - TTDGConfig1
Protection Mode: MaxPerformance
Databases:
orclstby1 - Primary database
Error: ORA-16778: redo transport error for one or more databases
orclprmy - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
########### listener.ora on orclstby1
[root@orclstby1 admin]# cat listener.ora
# listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME=orcl)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
(SID_DESC =
(GLOBAL_DBNAME=orclstby1)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
(SID_DESC =
(GLOBAL_DBNAME=orclstby1_DGMGRL)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
ADR_BASE_LISTENER = /u2/oracle
############## tnsnames.ora on orclstby1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
orclprmy =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
orclprmy_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
orclstby1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
orclstby1_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
##### alert log on orclstby1.
Fatal NI connect error 12504, connecting to:
(DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 06-SEP-2013 13:19:55
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
There is problem in alert log.
In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
Is any idea?
Thanks for help.
消息编辑者为:user4914135#### on primary database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME STATUS TARGET ARCHIVER SCHEDULE VALID_TYPE VALID_ROLE DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1 VALID LOCAL ARCH ACTIVE ALL_LOGFILES ALL_ROLES orclprmy
LOG_ARCHIVE_DEST_2 VALID REMOTE LGWR PENDING ALL_LOGFILES PRIMARY_ROLE orclstby1
LOG_ARCHIVE_DEST_3 INACTIVE LOCAL ARCH INACTIVE ALL_LOGFILES ALL_ROLES NONE
#### on standby database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME STATUS TARGET ARCHIVER SCHEDULE VALID_TYPE VALID_ROLE DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1 VALID PRIMARY ARCH ACTIVE ALL_LOGFILES ALL_ROLES orclstby1
LOG_ARCHIVE_DEST_2 ERROR STANDBY LGWR PENDING ONLINE_LOGFILE PRIMARY_ROLE orclprmy
ORA-12504: TNS:listener was not given the SERVICE_NAME in
CONNECT_DATA
LOG_ARCHIVE_DEST_3 INACTIVE PRIMARY ARCH INACTIVE ALL_LOGFILES ALL_ROLES NONE
#### log_archive_dest on primary database
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location=/u3/arch/orcl vali
d_for=(ALL_LOGFILES,ALL_ROLES)
db_unique_name=orclprmy
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
log_archive_dest_2 string service="orclstby1", LGWR ASYNC
NOAFFIRM delay=0 optional comp
ression=disable max_failure=0
max_connections=1 reopen=300 d
b_unique_name="orclstby1" net_ti
meout=30, valid_for=(all_logfi
les,primary_role)
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
#### log_archive_dest on standby database
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location=/u3/arch/orclstby1 vali
d_for=(ALL_LOGFILES,ALL_ROLES)
db_unique_name=orclstby1
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
log_archive_dest_2 string service=orclprmy ASYNC valid_for
=(ONLINE_LOGFILE,PRIMARY_ROLE)
db_unique_name=orclprmy
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
log_archive_dest_23 string
log_archive_dest_24 string
log_archive_dest_25 string
#### spfile on standby database
</u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
orcl.__db_cache_size=1040187392
orclstby1.__db_cache_size=1090519040
orcl.__java_pool_size=16777216
orclstby1.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orclstby1.__large_pool_size=16777216
orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=536870912
orclstby1.__pga_aggregate_target=536870912
orcl.__sga_target=1610612736
orclstby1.__sga_target=161061273
orcl.__shared_io_pool_size=0
orclstby1.__shared_io_pool_size=0
orcl.__shared_pool_size=503316480
orclstby1.__shared_pool_size=469762048
orcl.__streams_pool_size=16777216
orclstby1.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_file_nam
e_convert='orcl','orclstby1'
*.db_name='orcl'
*.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=5218762752
*.db_unique_name='orclstby1'
*.deferred_segment_creation=FALSE
*.dg_broker_start=TRUE
*.diagnostic_dest='/u2/oracle'
*.fal_client='orclstby1'
*.fal_server='orclprmy'
*.log_archive_config='dg_config=(orclprmy,orclstby1)'
*.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
*.log_archive_dest_2='ser
vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
*.log_archive_dest_state_2='ENABLE'
orcl.log_archive_format='orcl_%t_%s_%r.arc'
*.log_archive_format='orclstby1_%t_%s_%r.arc'
orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
*.log_archive_max_processes=4
*.log_archive_min_succeed_dest=1
orcl.log_archive_trace=0
orclstby1.log_archive_trace=0
*.log_file_name_convert='orcl','orclstby1'
*.open_cursors=300
*.pga_aggregate_target=536870912
*.processes=
1500
*.remote_login_passwordfile='EXCLUSIVE'
*.sessions=1655
*.sga_target=1610612736
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
</u2/oracle/product/11.2.0/dbhome_1/dbs>
Thank you for your help. -
XI Configuration objects Transport problem
Hi Experts,
Interface determination and Receiver Agreement in Receiver determination has to be configured every time when we move our transports from DEV to QA and QA to production ?
Regards,
VikramLet me assue you that I have never made any changes manually on my Dev Box Ever.
1.If you create the Transport Targets for your Business Systems correctly such that all Source Business Systems are mapped to a Target Business System and
2. All the Target Business Systems belong to a Single Transport Group pointing to your QA / Prod Integration Server, things work like a charm.
As you do not have details, it would be very difficult to point fingers on what the issue was, but normally the problem is due to either of the above 2 not being done correct,.
Regards
Bhavesh -
Transportation Planning for Shippers RDS
I'm implementing SAP TM 9.0 Transportation Planning for Shippers RDS.
While trying to activate this solution in Solution Builder I get following errors:
1. Error@ ECATT /SMBERP/XK01_O001_T55 in BB TM1 (XX) of scenario T79 does not exist in system
2. Error@ ECATT /SMB50/WE21_O001_E04_01 in BB TM3 (XX) of scenario T79 does not exist in system
3. Error@ BC Sets /SMBA0/V_T681F_B4E2_J01 in BB TM7 (XX) of scenario T79 do not exist in system
Installation files (INST_FILES_TMS_XX_BP_ERP606V7.zip file) were downloaded properly, but these ecatts are missing somehow. Did anybody face with this problem?Hi Erica
We do have expertise in this area and can handle the projects. Please let me know your contact details or write to [email protected] or reach me out on +91 99595 99887 to discuss further on this.
Regards
Krishna -
Open Hub transporting problems
Hi everybody, we have Open Hub transporting problems, it just gives us return code 12 or 8, basically, it doen't want to transport neither Open Hub Destination, nor Transformations, nor DTPs, and bear in mind that we're on the 15th Patch Level. We've looked at all the SAP Notes, but they reffer to the earlier patch levels...
And other problem, is that it's OK in DEV system but in QUALITY system, when you launch a DTP it gives us a dumb with ASSIGN_TYPE_ERROR
Any ideas??My destination path on the DEV box is simply the following (identified by BID in the following path):
D:\usr\sap\BID\DVEBMGS00\work
And when I locate the un-activated open hub on the QA box, the BID is already changed to BIQ, but the server name box/field is empty....
I am going to try with the object changebility option, btw, is there any documentation on how to change these objects that are marked with object changebility on the QA box (provided that we can not manually change anything on the QA box)...
Anyways, I think my problem is with the server name conversion from "abc-bi-dev" to "abc-bi-qa"....!!!
Also, please note the RSBFILE entry for this object in the QA box has the "btcsrvname" as blank...
Do you think there is any additional setting that needs to be done on the QA box to do this translation (from "abc-bi-dev" to "abc-bi-qa")?
The only two setup we have done as far as the BI is concerned is at the "Tools-> Conversion of logical system name"....where you only put the conversion for client name mapping from dev to qa and local file system mapping from dev to qa.
So, is there anything else to map the host name (from "abc-bi-dev" to "abc-bi-qa") either at BI perspective or Basis/NetWeaver perspective?
Thanks a lot...
~Sabuj.
Edited by: Sabuj Haque on Feb 1, 2009 1:11 PM
Edited by: Sabuj Haque on Feb 1, 2009 5:34 PM -
Change run for Compounding infoobjects
Hi Experts,
I need a solution.My question is that do we have any option like attribute change run for compounded infoobjects.Ex.Componding change run??.
Issue is that.I have Characteristic infoObject ZBOMM i.e for Bill of material.It has attributes and compounded infoobjects.The componded infoobjects are 0plant and 0material.We know these compounded objects acts as an primary key for ZBOMM infoobject.When the changes happen for attributes,because of attribute change run it over writes all attributes of ZBOMM which will be available for reporting.But when it comes to compounding infobjects (0plant and 0 material) it will retain the old data and also reflects the new changed data.this is shows double entry in reports.I want the old data not to be present as it happens for attributes.
Is there any solution for this problem?.
Please let me know.
Thanks and Rgds
ACEHi!
Run RSDDS_AGGREGATES_MAINTAIN for 0plant and 0material.
Hope it helps!
Adwin -
Doubt in creating the transport request for "STANDARD TEXT""
HI ALL,
i used the standard text in scripts but i am getting the problem while creating the transport request for that,
i am not able to create the transport request for that,if anybody knows plzlet me know,
this is very urgent,
thanks and regards,
saikrishna.HI SURESH ,
THANKS FOR UR IMMEDIATE REPLY ,
i executed that report in that i have given
Name of Correction : ZREPST
Textkey-object:
Text key name:
Text key - ID: ST
Text key - language :EN
Here Textkey-object,Text key name
wat i have to ,give after that ,can i execute that ,
will it create the request.
plz let me know,now ur answer is very valueble ,because ,now i have to release everything,
plz let me know immediately,
thanks and regards,
saikrishna. -
Insert new Master Data Record for an InfoObject using a Function Module
Hi @ all,
is there any Function Module for creating a new master data record for an InfoObject? Implementing a FM for inserting a master data record into a master data table is done quickly. I think there will be problems with inconsistency implementing a FM using a simple "Insert" Statement. Isn´t it?
I know it is possible to maintain an InfoObject in RSA1 (Master data IO> right click>Maintain Master data>execute(F8)> ...) but I have another requirement for using a FM.
Thanks!
Regards,
Johannesuse this
RSNDI_MD_ATTRIBUTES_UPDATE
Maybe you are looking for
-
AP REPORT AGE WISE, VENDOR WISE REQUIRED
Hi, Please give me if there is any T-code to get the AGE wise VENDOR wise AP report at on go as we know the report code ( S_ALR_87012078 ) only for the same, in which, unless otherwise, we go for drill down this report further, the report is being d
-
Capturing third party manufacturer for the batch
Hi , we are in the business of Pharma Products trading and marketing , as per business requirement we need to capture third party manufacturer for particular batch. The scenario is as follows - Our Company - Raise PO to Vendor A for Material Mat001
-
My G5 PowerPC still works great, but what is the latest OS that is possible. I just bought a new HP Printer and it is not compatible with OS 10.4. Is there any hope?
-
Strangest screenshot ever. Please help decipher on my iBook G4 Mac 10.4.11
When I tried to install a new hard drive on my iBook G4, I got this crazy image. When I then tried to boot up from the 10.4 DVD, I got the same image. Please help me identify what the heck it is and why I'm getting it. Any help would be appreciated.
-
PDEContentGetAttrs returns zero attributes
Hi, I'm currently in the process of adjusting a plugin written with Acrobat SDK 8.0 to Acrobat SDK 10.0 (X). All goes well but I'm stuck on something very annoying... In order for the plugin to parse the contents of the current page there is the foll