Transport Proposal Customization?

Hello,
  Can anyone tell me if there are any userexits associated with the Transport Proposal? We would like to have 'immediate' default as the import time when going to our QA system and 17:15 default as the import time when going into our Production system. We'd also like to add a couple of custom checkboxes to the screen. I've looked in the configuration and didn't find anything to help me out.
Also, I know that there are userexits associated with the transport request but that doesn't help me.
Thanks for any help,
Diane Merrill
Oak Ridge National Lab

Hi Diane,
I'm not that familiar with this area but I agree there doesn't appear to be any userexits around these programs.  I checked out the screens in function group TMSU and they all appear to be hardcoded (after a very quick look!
Brad

Similar Messages

  • Transport of Customizations from ECC 5.0 to ECC 6.0

    Hi,
    We have some customizations done in ECC 5.0, which we now want to implement in ECC 6.0 (Freshly Installed). Can we transport these customizations directly to ECC 6.0 (after checking the release notes to see if any functionality has changed between the versions, which would effect the customizations).
    If not, is there some other method which you would suggest.

    Hi,
    SAP typically does not support transports between different releases for consistency reasons. SAP will usually explicitly document where it is possible (usually in a SAP note).  I personally have not seen one for mySAP ERP 2004 and 2005.
    If you do transport between releases SAP can't validate that the transport was successful (i.e. all table entries and data dictionary entries are consistent logically and from a business configuration perspective).
    I think you have three options:
    1. copy your mySAP ERP 2004 system to the "new install" server and upgrade it to mySAP ERP 2005.
    2. Install a new mySAP 2004 system, do initial configuration, import your transports, and then upgrade it.
    3. Install a new mySAP ERP 2005 and manually recreate the configurations.
    All have pros and cons. I would usually recommend #3 as your configurators will have documented their configurations in detail so it should not be too difficult to re-implement them (right?)
    I hope this helps,
    Mike.

  • Error in workflow for transport proposal

    Hi
    I've got an error in transport proposal. Actually we are creating transport proposal after realeasing transport . There is a workflow running behind it. it's a standard workflow template no : WS30000524.
    It was running absolutely fine till yesterday. But today I've found a strange error. The error is as below:
    Problems occurred when generating a mail                                   
    Error '9' when calling service 'SO_OBJECT_SEND'                            
    Workflow 179001: Repair message for error & could not be created           
    Inconsistent workflow definition: Node/step number 1 is not available      
    Error '9' when calling service 'SO_OBJECT_SEND'                            
    Inconsistent workflow definition: Node/step number 1 is not available      
    Workflow 179001: Repair message for error & could not be created           
    Problems occurred when generating a mail                                   
    Also, the container SOFM,CTProposal etc are not actually even displayed in the WF log. No step has been created.
    Is there any config missing?
    It would be very helpful if anyone has faced such issue and can help me.
    Thanks
    Moumita

    Hi
    i'm using version 4.7. Also I've checked the wf template there is no fork. It's a standard wf... template number I've mentioned in my first mail.
    While transporting any change feom Development system to Test system we are actually creating transport proposal. You can find a tab of transport proposal in SE10. After creating this transport proposal a standard wf got triggered for approval of transport proposal. This workflow went into error.
    hope this small backgroung will help you to get into my actual issue.
    Please let me know if you have any understanding regarding the root cause of this issue.
    Thanks
    Moumita

  • Error in transport proposal

    Hi
    I've got an error in transport proposal. Actually we are creating transport proposal after realeasing transport . There is a workflow running behind it. it's a standard workflow template no : WS30000524.
    It was running absolutely fine till yesterday. But today I've found a strange error. The error is as below:
    Problems occurred when generating a mail
    Error '9' when calling service 'SO_OBJECT_SEND'
    Workflow 179001: Repair message for error & could not be created
    Inconsistent workflow definition: Node/step number 1 is not available
    Error '9' when calling service 'SO_OBJECT_SEND'
    Inconsistent workflow definition: Node/step number 1 is not available
    Workflow 179001: Repair message for error & could not be created
    Problems occurred when generating a mail
    Also, the container SOFM,CTProposal etc are not actually even displayed in the WF log. No step has been created.
    Is there any config missing?
    It would be very helpful if anyone has faced such issue and can help me.
    Thanks
    Moumita

    Hi
    i'm using version 4.7. Also I've checked the wf template there is no fork. It's a standard wf... template number I've mentioned in my first mail.
    While transporting any change feom Development system to Test system we are actually creating transport proposal. You can find a tab of transport proposal in SE10. After creating this transport proposal a standard wf got triggered for approval of transport proposal. This workflow went into error.
    hope this small backgroung will help you to get into my actual issue.
    Please let me know if you have any understanding regarding the root cause of this issue.
    Thanks
    Moumita

  • How To Create Transport Proposal?

    Hi,
    Can anybody explain me how to create transport proposal?this is urgent.plz respond
    Regards
    Sap Guru

    hi Guru,
    do you mean transport request? Than go to tcode SE01 and click create, choose customizing request (or workbench, if you want to transport abap programs, tables, etc.), enter some name and you have a transport reuqest.
    hope this helps
    ec

  • Find Transport proposal

    How can I find my transport proposal since it is not in my inbox.
    Is there a table i can put in my transport request number and gets it proposal number?

    Ammey
    Thanks for your reply.
    I have released the request with transport proposal and in the inbox its showing approved. but its not yet imported into the target system its is showing status restart import. What to do? Should I manually import?
    Thanks

  • Transport  Request Customization

    Hi Gurus,
    Where can i check whether the automatic recording of changes is active in Customizing for a transport request. I mean the exact path.
    Reason - Some of the configuration has not been transported to QUALITY
    Thanks

    Hello,
    Use transaction SCC4 and display client details.
    Thanks,
    Venu

  • Transport of customization requests

    Hi,

    This Q is just a mistake. I don't think that a simple "Hi" is a good enough questions to be answered.
    Gabor

  • Customize table and transport

    hi expert,
    How can i transport a customize table that i made from Development server going to Production server? Do i need to set something to it? Pls help me....godbless
    thanks,
    nips

    Hi Nips,
    I think you have saved your customized table as a local object($tmp).
    Just enquire about the package in which this table has to be saved.
    then just open the table then click on the GOTO tab in the toolbar, then click on the object directory entry. Just change package. Then it will ask you for the transport number. CReate a trnaport number and just transport this number to production server.
    To Transport the Transport number.
    GoTo SE10.
    click on your transport number. You will see another transport number attached with it. Just click on that transport number and press F9. Then Click on the above transport number and press F9.
    Here the whole object is transported(Exported) to the destination.
    Now login to your production server and open transaction STMS. Click F5.
    you will get the next screen. click on your production server. here you will find your transport number. just click on it and press CTRL+ F11 and then CTRL+F8. refresh the screen and wait for some time.
    Regards,
    vamsi

  • Transport WorkFlow

    Dear All,
    I want to use the transport work flow for transporting the customization from DEV to QAS and PRD systems.
    I followed the
    [SAP HELP|http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/34bd66c03d11d2851c0000e8a57770/frameset.htm] to configure stms work flow.
    now I found that the proposal comes to me to approve /import it and no thing go to my manager to approve but I want the workflow works by this way the proposal go to my manager to approve it and after that the proposal comes to me to import it,
    So could you please tell me how can i make this?
    Thanks in advance
    Edited by: Sherif Eid on Feb 3, 2008 3:39 PM

    What did you do to find the workflow log? It doesn't look like you are trying to find it, but just wait for an answer.
    You can find it by going to the inbox (if you still have a task there) select the task and click on the icon which looks like a scroll or paper or something. When you hover over it with your mouse it will say workflow log. Then go to the technical log and when you change the layout of this you can find the template number.
    Another way is after starting a workflow, start transaction SWI1 and you will get a list of started tasks and workflows, identify yours. From here you have the option to go to log using the same icon.
    Regards,
    Martin

  • How can I transport data from one client to another client?

    How can I transport data from one client to another client? 
    Regards,
    Subho

    hmmm, CTS = cutomizing transport?
    If you have a customizing table, there are still two possibilities.
    1. customize in DEV system and transport
    2. customize right there where you need it.
    this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

  • Transport an Appraisal and Objective Setting Template

    Note the following advice pertaining to transporting an appraisals and objective setting template (I have not found documentation about this anywhere else, so hopefully some of you find this useful):
    Scenario:
    You have maintained your templates in PHAP_CATALOG_PA in the main config client, and you have transported all other configurations (basic settings, etc.) to your unit test/integration test environment.
    However, although you have right-clicked the category groups and templates to be transported and included them in a transport request, you find that only some of your configuration (or perhaps none at all!) is arriving in the target client when the transport is performed.
    You may initially be able to work around this by downloading/uploading your config, but once your templates contain more complex configuration (such as using dynamic element references, etc.) you will find that this is no longer a feasible approach.
    Cause & Resolution:
    The problem is caused by outdated information in the workflow definition environment (transaction SWU3), and specifically the section labeled "Check Entries from HR Control Tables".
    Run transaction SWU3, expand tree node "Maintain Definition Environment" (which should be marked with a red cross at this stage) and click on "Check Entries from HR Control Tables". The information presented in the right-hand pane indicates that:
    If there are errors regarding the transport objects PDST or PDWS, the relevant entries are not maintained in table SOBJ. You can use the report RHSOBJCH to rectify this later.
    Proceed as suggested and run report RHSOBJCH (through SE38 or SA38) in the config client (i.e. where the templates are to be transported from). This has no side-effects I am aware of other than updating the reference information required.
    If you now run SWU3 again you should find that the "Check Entries from HR Control Tables" node is marked with a green tick.
    Simply go back to the catalog, include your cat.groups & templates in a transport again, and Voila! Our work here is done.
    Happy transporting...
    Side-note: You may ask (as I did) what transporting of appraisal templates has to do with workflow, but it just so happens that the PD objects and infotypes associated with appraisals (VA, VB, VC, etc.) are transported through the same mechanism as workflow templates (which are also PD objects). if you peek inside the transport you will note that everything to do with the template and category group configuration is bundled inside PDWS and PDST transport objects...
    Edited by: Francois Van Lille on Jun 29, 2009 9:58 AM

    >
    A. Jimenez wrote:
    > Hi Francois,
    >
    > I have successfully transported Categories and Templates, but I have customized "appraisals process", which seems to create VH Objects, and this objects or customizations are not added in the transport order.
    >
    > You or anyone know how to transport this customization?
    >
    > Thanks in advance
    Hi Abe,
    what is the appraisal process you are talking about?  The new stuff in ep4 where you define the process and steps which create the roadmap at the top of the document?  if so SAP does not have a great straightforward solution, but they did provide us some options.
    you can check out this thread and if you want I can send you the full document that is referred to in the post. 
    EP4: Performance Management-Flexible-Transporting the Tab & Process config

  • Approval for transports to Production

    Hi,
    I posted this in ERP and dint get a reply so i am posting here.
    I configured transport workflow QA approval procedure. When i approve the proposal it is getting imported into QA automatically. I want to approve but let somebody else to move the transport manually.
    How do i do this?
    Also once its moved to QA and tested fine how is the approval to PRD handled using transport workflow?
    Please advice.

    Hi Shannon,
    Apologies could not reply earlier.. I think this is one of the drawbacks  of transport workflow as suggested in the link below: 
    [Transport Workflow|http://help.sap.com/saphelp_sm40/helpdata/en/5a/34bd66c03d11d2851c0000e8a57770/content.htm]
    Please check from the 2nd paragraph onwards.
    Regardless of anything the sequence is the change owner's responsibilty. Even if mass transport option was invoked and the transports were released in wrong sequence then you would get this error in case of auto imports. Manual imports where you have a sequence control check is helpful but tedious business. I think the onus is one transport owners to ensure that the sequence of transport requests is correct in transport proposal in case of TMS workflow and in case of mass transports the transports are released in correct sequence.
    Coming to the QA approval step I believe that TMS workflow and QA approval are separate in the sense the individual transport and not the proposal gets approved. However I would really suggest ythat ou check with SAP itself on that .
    Regards.
    Ruchit Khushu

  • Assert condition failed when saving freight unit planning in transportation cockpit

    Hi all,
    I can successful complete Transportation Proposal and Optimizer Planning for freight Unit in Transportation cockpit. But when I am trying to save the freight Unit in Transportation cockpit, system is giving me dump "ERROR: The ASSERT condition was violated. (termination: RABAX_STATE)"
    ST22 showing  /SCMTMS/CL_BUFVAR_DISPATCHER==CP      Assertion failed
    Details of Active calls/Event in ST22
    35 METHOD       /SCMTMS/CL_BUFVAR_DISPATCHER==CP    /SCMTMS/CL_BUFVAR_DISPATCHER==CM005   116
        /SCMTMS/CL_BUFVAR_DISPATCHER=>/BOBF/IF_FRW_BUFFER~MODIFY
    34 METHOD       /BOBF/CL_FRW==================CP    /BOBF/CL_FRW==================CM00K  1173
        /BOBF/CL_FRW=>DO_MODIFY
    33 METHOD       /BOBF/CL_FRW_INT_ACCESS=======CP    /BOBF/CL_FRW_INT_ACCESS=======CM002    45
        /BOBF/CL_FRW_INT_ACCESS=>END_MODIFY
    32 METHOD       /BOBF/CL_FRW==================CP    /BOBF/CL_FRW==================CM00E   861
        /BOBF/CL_FRW=>DO_DETERMINATIONS
    31 METHOD       /BOBF/CL_FRW==================CP    /BOBF/CL_FRW==================CM01C   274
        /BOBF/CL_FRW=>/BOBF/IF_FRW_SERVICE_LAYER~FINALIZE
    30 METHOD       /BOBF/CL_LIB_DELEGATION_BOPF==CP    /BOBF/CL_LIB_DELEGATION_BOPF==CM00E    12
        /BOBF/CL_LIB_DELEGATION_BOPF=>/BOBF/IF_FRW_DELEGATION~FINALIZE
    29 METHOD       /SCMTMS/CL_BUFVAR_DODELEGATIONCP    /SCMTMS/CL_BUFVAR_DODELEGATIONCM004     6
        /SCMTMS/CL_BUFVAR_DODELEGATION=>/BOBF/IF_FRW_DELEGATION~FINALIZE
    28 METHOD       /BOBF/CL_FRW==================CP    /BOBF/CL_FRW==================CM01C   246
        /BOBF/CL_FRW=>/BOBF/IF_FRW_SERVICE_LAYER~FINALIZE
    27 METHOD       /BOBF/CL_TRA_SERVICE_MGR======CP    /BOBF/CL_TRA_SERVICE_MGR======CM00P    23
        /BOBF/CL_TRA_SERVICE_MGR=>/BOBF/IF_TRA_SERV_MGR_TRANSACT~FINALIZE
    26 METHOD       /BOBF/CL_TRA_TRANSACTION_MGR==CP    /BOBF/CL_TRA_TRANSACTION_MGR==CM001    60
        /BOBF/CL_TRA_TRANSACTION_MGR=>FINALIZE
    25 METHOD       /BOBF/CL_TRA_TRANSACTION_MGR==CP    /BOBF/CL_TRA_TRANSACTION_MGR==CM00S    63
        /BOBF/CL_TRA_TRANSACTION_MGR=>/BOBF/IF_TRA_TRANSACTION_MGR~SAVE
    24 METHOD       /BOFU/CL_FBI_CONTROLLER_NEW===CP    /BOFU/CL_FBI_CONTROLLER_NEW===CM00D    22
        /BOFU/CL_FBI_CONTROLLER_NEW=>IWCI_IF_FPM_TRANSACTION~SAVE
    23 METHOD       /SCMTMS/CL_UI_CONTROLLER_PLN==CP    /SCMTMS/CL_UI_CONTROLLER_PLN==CM00L    63
        /SCMTMS/CL_UI_CONTROLLER_PLN=>SAVE_PLANNING
    22 METHOD       /SCMTMS/CL_UI_CONTROLLER_PLN==CP    /SCMTMS/CL_UI_CONTROLLER_PLN==CM00N    41
        /SCMTMS/CL_UI_CONTROLLER_PLN=>HANDLE_ACTIONS
    21 METHOD       /SCMTMS/CL_UI_CONTROLLER_PLN==CP    /SCMTMS/CL_UI_CONTROLLER_PLN==CM00A    16
        /SCMTMS/CL_UI_CONTROLLER_PLN=>IWCI_IF_FPM_APP_CONTROLLER~AFTER_PROCESS_EVENT
    20 METHOD       /1BCWDY/03N7LCDLX3EFC4K580SF==CP    /1BCWDY/B_03N7LCDLX3EFC4K580YR        689
        CL_COMPONENTCONTROLLER_CTR=>AFTER_PROCESS_EVENT
        Web Dynpro Component          /BOFU/WDC_FBI_CONTROLLER
        Controller                    COMPONENTCONTROLLER
    19 METHOD       /1BCWDY/03N7LCDLX3EFC4K580SF==CP    /1BCWDY/B_03N7LCDLX3EFC4K580YR        119
        CLF_COMPONENTCONTROLLER_CTR=>IWCI_IF_FPM_APP_CONTROLLER~AFTER_PROCESS_EVENT
        Web Dynpro Component          /BOFU/WDC_FBI_CONTROLLER
        Controller                    COMPONENTCONTROLLER
    18 METHOD       CL_FPM========================CP    CL_FPM========================CM00G   101
        CL_FPM=>CALL_UIBB_PROCESS_EVENT
    17 METHOD       CL_FPM========================CP    CL_FPM========================CM005    46
        CL_FPM=>PROCESS_EVENT
    16 METHOD       CL_FPM========================CP    CL_FPM========================CM00C    33
        CL_FPM=>RUN_EVENT_LOOP
    15 METHOD       CL_FPM========================CP    CL_FPM========================CM002     5
        CL_FPM=>IF_FPM~RAISE_EVENT
    14 METHOD       /1BCWDY/03N7LCDLX3EFC3O22W8A==CP    /1BCWDY/B_03N7LCDLX3EFC3O22XGJ       1412
         CL_PAGE_HEADER_CTR=>ONACTIONACTION
         Web Dynpro Component          FPM_OVP_COMPONENT
         Controller                    PAGE_HEADER
      13 METHOD       /1BCWDY/03N7LCDLX3EFC3O22W8A==CP    /1BCWDY/B_03N7LCDLX3EFC3O22XGJ        581
         CLF_PAGE_HEADER_CTR=>IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER
         Web Dynpro Component          FPM_OVP_COMPONENT
         Controller                    PAGE_HEADER
      12 METHOD       CL_WDR_DELEGATING_VIEW========CP    CL_WDR_DELEGATING_VIEW========CM006     6
         CL_WDR_DELEGATING_VIEW=>INVOKE_EVENTHANDLER
      11 METHOD       CL_WDR_ACTION=================CP    CL_WDR_ACTION=================CM00A    38
         CL_WDR_ACTION=>IF_WDR_ACTION~FIRE
      10 METHOD       CL_WDR_WINDOW_PHASE_MODEL=====CP    CL_WDR_WINDOW_PHASE_MODEL=====CM00U    95
         CL_WDR_WINDOW_PHASE_MODEL=>DO_HANDLE_ACTION_EVENTS
       9 METHOD       CL_WDR_WINDOW_PHASE_MODEL=====CP    CL_WDR_WINDOW_PHASE_MODEL=====CM002    95
         CL_WDR_WINDOW_PHASE_MODEL=>PROCESS_REQUEST
       8 METHOD       CL_WDR_WINDOW=================CP    CL_WDR_WINDOW=================CM00V    12
         CL_WDR_WINDOW=>PROCESS_REQUEST
       7 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00I    77
         CL_WDR_MAIN_TASK=>EXECUTE
       6 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00U     6
         CL_WDR_MAIN_TASK=>IF_WDR_RUNTIME~EXECUTE
       5 METHOD       CL_WDR_CLIENT_ABSTRACT_HTTP===CP    CL_WDR_CLIENT_ABSTRACT_HTTP===CM01C   114
         CL_WDR_CLIENT_ABSTRACT_HTTP=>HANDLE_REQUEST
       4 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00J    85
         CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
       3 METHOD       CL_HTTP_SERVER================CP    CL_HTTP_SERVER================CM00I   627
         CL_HTTP_SERVER=>EXECUTE_REQUEST
       2 FUNCTION     SAPLHTTP_RUNTIME                    LHTTP_RUNTIMEU02                     1218
         HTTP_DISPATCH_REQUEST
       1 MODULE (PBO) SAPMHTTP                            SAPMHTTP                               13
         %_HTTP_START
    Any help will be appreciated
    Thanks and regards
    Shambhu Sarkar

    Hi Shambhu,
          When i see the assert,i feel there is some problem at the determination. Whether you have implemented any custom determination of your own? 
          No issues, Place the break-point at the assert and check the call stack and find the which determination is that?
    Thanks,
    Dinesh

  • Request owner approval in Transport Workflow (DEV to QTY)

    Hello,
    I have set up the transport workflow between DEV and QTY systems on ERP6.
    I need to allow developers and consultants to approve their own transport proposals in order to facilitate transport to the QTY system.
    Currently, when an user releases a transport request and creates a transport proposal, the approval message is sent to the TMS Worklist.
    Therefore, only administrators can approve transport proposals.
    How to allow users to approve and import their own requests through the Transport Proposal Inbox in Transport Organizer (SE10) ?
    Thanks in advance.

    Hi Serguei,
    Please check whether you have specified &_WF_INITIATOR& as excluded agent.
    Please remove &_WF_INITIATOR& as excluded agent.
    With Best Regards
    Julia

Maybe you are looking for