Transport query variants
Hi,
I have a lot of query variant which I need in every system.
Is it possible to transport query variants? I already tried to transport the query and variable in the transport connection. Addionally I figured out that the variants are stored in table rsrvariant, but I'm not able to transport the entries.
Regards,
Karen
Hi,
Pls transport the table RSRVARIANT ,which contains the entry for all bex variants, all variants will be transported then.You should transport the table contents(via SE16 or SE10).Create a request in SE09 or SE10. From the context menu of the transport no, go to object list (or double click). On the next screen go to 'change' mode.Press 'add new entry' (plus icon).
Rgds,
Murali
Similar Messages
-
How to transport Query variant used in APD
Hello Experts,
I have created 2 query variants for a query in Development system. And, these variants are being used in APD. Now, when APD is transported to next system, query variants does not exist in next system, so cannot execute APD.
Please let me know how can i transport the query variants.
Note: Gone through SDN, and found, query variants can be transported through some tables.
Please let me any other possibile sloutions for the same.
Thanks
LavanyaHi Lavanya,
To the best of my knowledge, you cannot transport query variants. You have to manually create them in each system. The reason being, when you try to create variants through RSRT -> Query Variants, you are basically trying to create variants for a temporary program generated during run time!
These run time programs do not have TADIR entries (not transportable) and hence any sub elements (like variants) created on these programs are not transportable as well.
Actually you can export variants.Please follow the below steps:
1. Go To TCode SE38.
2. Execute "RSTRANSP".
3. Input your program name.
4. Input your variant name ie. "Z**** ".
5. Execute.
6. Click on continue.
7. You should be able to create a new transport at this point.
Hope It Helps,
Thanks,
Amit Kr. -
Can we transport BW QUERY VARIANT (created in DEV) to QAS and PRD?
Hi gurus,
I created a lot of QUERY VARIANT ( parameters saved when we execute queries ) in BW DEV.
I am using those variants in my Analisys Process Designer and i do not want to create again in QAS and PRD.
Somebody knows how to transport those variants?
Is possible to assign by SE03? What is the code that object?
Thanks for any Help!!!
Carlos Eduardo OlintoI transported my Query Variants.
- Variants must be created in DEV
- Download the records from:
> tables
RSRVARIANT
RSRVARIANTDIR
RSRVARIANTTXT
> Filter Field: VARI = "Query Variants Code"
- Create request in DEV
- Assign R3TR TABU <Table name>
Tables:
RSRVARIANT
RSRVARIANTDIR
RSRVARIANTTXT
- Save the contents in each table (Only KEY FIELDS)
- Verify the Lenght in each field, it must be correct (no spaces for each Field)
I hope it helps you!
Carlos Eduardo -
Transport standard variant of SAP Query
Hey,
I made a SAP Query with SQO1. Within the attributes of the query, I defined a standard variant.
How can I transport this variant.
When I go to maintain variant, I can click to program RSTRANSP.
When I try to execute, I get the following message "Function not possible for local/private objects". In the help it says that I have to create a transport for my program.
But my query is in a transport. I already transported the query to QAS and it works fine.
Do I have to put the program also in a transport? The program is SAP generated code with the following name "AQZZZISU========CP_METERS=====". I haven't transported the program but it is available in QAS. So I think I don't need to transport it.
Does anyone how I can transport my variant?
Thanks
StevenI have attached the sap Query based on your idea. But I geting small probelm. Please help me on this.
The varient is created as Protected by default. I can't able to create the varient unprotected. Can you tell me how to create unprotected varient for SAP Query? becuase other user can't able to change the varient it is giving the error message with my user name as " No authorization to change the varient <varient name> Protected by <my user name>".
Please could you help me how to fix it. this issue? -
How to transport variable variants
Hi Gurus,
I want to transport the variable variants? how can i do that? in BI7 system.
Regards
Kiran Kumar Manku.Hi,
Looks Funny, but i got the variants i have created in Dev to QAS. I thought of creating in QA but when i checked them, they already exists. Did u checked in RSRT , Query Variants after transporting the Query ?
In my case i have used the Variant in the APD's.
-Sonti- -
Copy Query Variants from InfoCube to MultiProvider
Hi,
Is it possible to copy query variants from an infocube to a multiprovider?
Basically, we used RSZC to copy the queries from the infocube to the multiprovider, but it doesn't look like the variants were copied over. Is there an ABAP program or some other workaround that can expedite/facilitate in recreating the variants on the multiprovider queries?
Your help is much appreciated.
Thanks,
KK
Edited by: Kristin Kalalau on Jan 29, 2009 10:48 PMIt is possible to copy but the only requirement is your target cube structure should match with the source cube structure.
Thanks...
Shambhu
Edited by: Shambhu Kumar Gupta on Jan 30, 2009 12:01 PM -
Error while transporting query
Hi All,
I am transporting query from one client to another. Initial it's generate a request number when I exported. But when I am importing the same request number in another client it's saying that 'dataset does not exit.
Although I transported query using downloading & uploading function.
But why this error is coming when I am using export import funtionHi Sriniwas,
I never used this TCode for transporting query.
Please let me know what is the use of this TCode & how we can use this TCode while transporting query.
Thnx
Rgds
SAN -
How to transport BEX variants in BI?
Hi,
after the bw-upgrade we have problems with the transport of our variants created in BEX. In BW 3.1 we used saplsvar ( with report-id and variantname) to create a transport. But this doesn't work with BI. Does anyone know which parameter saplsvar need to create a transport in BI?- Or which other alternativ exists to transport a variant.
Thanx in advance.Hi,
the new variants will be stored only in RSRVARIANT, but not in the VARID. In VARID are only the variants saved in 3.x version.
But how can I transport RSRVARIANT; its a SAP-table?
I'm looking for a program like RSTRANSP, because this program will not work with BI.
Detlef -
How to disable GLOBAL query variants in Portal (ANALYSIS Template)
Hello Experts,
Does anybody know how to disable the saving of global query variants on the selection screen?
Currently if anybody goes in and saves the variant with Description and puts something in the Technical Name, it saves that variant as global, so that everybody can see it. If they put something in the description only and leave the technical name blank, then it saves the variant as local. Therefore, how would I go about disabling the saving of global query variants?
Thank you,
Andrei
Message was edited by:
AGThis object S_ALV_LAYOgoverns the way ALV layouts are saved.
For more info see the OSS Note 601803.
Hope This Helps
Anand Raj -
Bex Query variants not working
Hello Experts,
I have a unique problem with one of my queries, the query variants which are created before Nov 1 are not fetching any vaules instead it gives a message MAKE ENTRY IN ALL THE FIELDS......
the variants which are created in Nov are working fine.....we have not done any upgrade....
does anyone faced this kind of problem? what needs to done to get back the variant values in the selection screen.
Any help is highly appreciated.
RegardsWas there a change to an InfoObject that is in the InfoProvider that is also one of the query input options?
e.g. IO ZHARA used to be defeined as a Char with a length of 4, but was changed after Nov 1 to Char, length of 8.
If you change an IO like this that is in the variant, that will render the variant unusable.
There is a program that checks for variants that have been broken like this, and another that you enter the query's technical name and it repairs the variant.
Try a search on SDN for something like "query variant program". I'll post the program names after I get back in the office tomorrow. -
Hi,
I am trying to create a query variant in BI7. I want the values to be populated from TVARVC table. In RSRT, if i am giving Create variant, i am getting the next screen to enter the values.(same as we get in 3.5). but it does not show the query fields. It is showing these fields in attributes.
Query
HTML
URL
URL2
URL3
URL4
Where i can get the query fields (Like in 3.5) to populate from TVARVC table?
Thanks Pravender.If you are on BI 7 better to handle the variants in table RSRVARIANT than TVARVC.
You can write code to update the table RSRVARIANT as per requirement.
Hope this helps. -
Query Variant in APD not working properly
Hi
Guyz,
I have an issue using a Query Variant in APD.
My APD has data populating from a Query to a DSO.
When I run the query itself by using the variant it runs fine
but when i use the same query variant in the APD its giving an error.
I am saving the varaint for current Fiscal year period
i.e say 0072008 (as july 2008) and when i run query itself with this variant its fine but when i use the same in APD its giving the following error.
*" Value "08007" for variable "Fiscal Year/Period (Selection Options, Optional)" is invalid "*
Its interpreting the variant in a wrong way.
We are on BI 7.0 patch 14.
Your help is Appreciated.
Thanks
Jay.Shashi,
I think thats not my issue because I can use that variant but its interpreting the Fiscal year period in a wrong way.
Thanks
Jay. -
In RSRT, there is an option to create a query variant. How can we use this? I have a variable on 0calmonth and I want to create variants based on this so I can use it in a APD process. How can I do this? Thanks
Hi Uday,
You can create and maintain the query variants in RSRT. Type in the name of the query and click to execute it. The variable screen will pop-up and you can create the variant here. Or also you can click onthe Variants button and change any existing variants as required.
Hope this helps... -
Hi,
I am trying to Execute a query through Program
I had copied standard querys (ME80FN) Program RM06EAAW to my custom program
In that program , it is caaling a query and assigning one variant
Any idea from when that variant was assigned or How to create variants for ABAP Queries??
Thanks
Chandrasekhar J
Edited by: Chandrasekhar Jagarlamudi on Feb 20, 2008 1:08 AMHi,
Check these links...
http://help.sap.com/saphelp_nw04/helpdata/en/62/bc934814ba11d6999900508b6b8b11/frameset.htm
Re: ABAP Query variant - Error during SE93
Hope it helps u...
Regards,
KK -
Cannot save query variant in RSRT
I am trying to create query variants in RSRT. I am able to do it for most of the queries. But there are couple of queries for which I am not able to save it. Has anyone come across this issue before.
FYI - We are right now on SAP 7.31 and SP 4.
Thanks,
KalHi Kal,
Did you upgraded to BW7.31 recently?. if yes, run the report: RSR_VARIANT_XPRA.. This is the post upgrade activity. Can you check with the basis team run the same first in SAN system and then in actual landscape.
Regards,
Rajesh
Maybe you are looking for
-
How to insert message style text columns in database tables
Hi All, i have two pages. in first page segment1 lov is their.once u select the segment1 and click on the create button its navigate to next page. and display the releted segment1 details(these columns are message text input fields but read only colu
-
Hierarchy Nodes Display problem in the query
Hi I have an organizational hierarchy upto 6 levels of nodes. When it is displyed in the query only the first three levels are getting displayed. When i see in the restricted area ( when restricting values ) i find all the nodes displayed but when qu
-
Format Into File bug, repost#2
Dear All, I have found a strange bug/feature in Format Into File. A 3 digit integer number argument (eg. 123) together with the format string " %04d" should result in " 0123" being written to file but instead fails with error cluster; STATUS=TRUE CO
-
I have Lightroom 5 on my iMac and have just purchased the update to LR6. The email that confirms my purchase informs me that I've purchased Adobe Photoshop Lightroom 6 (Mac/Win,English) and gives me a serial number. However, when I follow the downloa
-
Copy shopping cart item (originally from catalog), able to change price
We create a shopping cart item by selecting a catalog item from CCM 2.0. The price is not changeable, as we would expect. We then copy that item in the cart to create item 2. However, the price in item 2 is now changeable, even though it was copied f