Transport Questions and Questionnaires from Dev to QAS or to PRD

Question
How do we transport questions and questionnaires from dev to QAS or to PRD. Do you type all them again or there is process no. What is best process others do
Answer
As you must be aware, Questionnaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
At least Iu2019m not aware of any other way to move the Questionnaire details across clients.
I know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment
Any body has soloution ?
Thanks.
Saquib
http://aspirehr.com/HCM_solutions/hcm_solutions.asp

Hi Vishal,
As you must be aware, Questionaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
Atleast i'm not aware of any other way to move the Questionnnaire details across clients.
i know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment.
So if you are a part of the Implementation Consulting team, it is your responsibility to train the core team in doing the activity in live environment. Hope this information helps.
Best regards
G Raj

Similar Messages

I have transport Infoset and Query from DEV to QAS

Dear Expert,
I have created an Infoset and Query. My Infoset and My Query have been copied to Query Global Areas and have been transport to QAS server. (I have created Request Transport, the number request is generated by system in DEV)
But when I look with tcode SQ01 and SQ02 in QAS, there are none of my infoset or query appeared.
Please, what should I do?
Best regards,
Dedy.W

Check wether yr request transported correctly since these type of requests generally locked..
After removing lock only we can transport these..
Check in quality..
Tcode.. STMS
Check here for yr request wether transported or not..

Transporting an ABAP query from DEV to QAS/PRD

Hi all,
I am trying to modify an existing query in DEV and move it to QAS and then to PRD. After making the changes in DEV, there was new transport request created, in which I had the changes for the query and in se93, i changed the name of the prog to the newly generated prog. after moving the transport to QAS, it is giving me a dump saying that the new prog generated in dev does not exist in QAS and hence the tcode does not work.
after that i tried with the standard SAP report "rsaqr3tr" and tried to make another transport assuming that the program would be together with the transaction and will be transported together. But this does not work.
I need help regarding this please - since it is an urgent rek - how do i transport the query after making changes to the already existing one - from DEV to QAS or PRD?
Please explain in detail where and what I am missing.
Thanks!
Related answers are appreciated and rewarded.

Hi Shyam.
I would like to suggest a few references,
[SDN - References for Query related to transport request|Query Related to Transport Request;
[SDN - Reference for Transport Management System (TMS)|Transport Management System (TMS) of R/3;
[SDN - Reference for Transport Request Problem|Transport reruest problem............;
[SDN - Reference for Transport request Query|Query Transport;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Problem while transporting Screen exit object from DEV to QAS client

Hello All,
I have developed screen exit for tcode 'ME51N' to add customer field in newly added TAB. To grayout that field in display mode, I have added code on the PBO event of that screen. Code for PBO even has been written inside the include. Exit is working fine on development client.
After transporting the exit on QAS client the field graying out functionality in diplay mode is not working eventhough the include which contains the code for PBO even is exist on QAS. Also in flow logic if i double clock on the PBO module event, it says object does not exist, eventhough the include which contains the PBO event code exist in QAS.
Please, help me to understand why the linkage between flow logic PBO event and the include where the PBO code has been written is not getting transported from DEV to QAS.

Hi,
First check the TR log if there is any errors. If no errors, then check if all the objects were properly transported or not.
You might have missed out in transporting the enhancement activation(CMOD).
Try to Rebuild the object list for updating the navigation index. You can do this from SE80=>Rightclick on function group=>More functions=>Rebuild object list.
Thanks,
Vinod.

How to move PI objects in IR and ID from DEV to QAS

Hi experts,
         I am new to PI and with lot of research and help from you all experts I could successfully create a scenario from XML to CSV conversion. I created message interface, interface mapping objects etc.. in "Integration Repository" and conficguration scenario, sender and receiver communication channels etc. in "Integration directory". Everything is working fine in DEV and now I want to move all these to QAS. I went through some documents on SDN and it was talking about XI track and CTS and I am so new to all these, I am not sure how to get started. Could someone please let me know the procedure of moving PI objects from DEV to QAS?
Thanks.
--Mithun

Not to Worry Mithun Da!
There are two ways to transport ID and IR Object to transport .
1. CTS + : Totally automated Way .,
2. .tpz : Manual Lagacy Import / Import way .
Now . Steps .are :
There are two types of transport mechanisms in XI/PI.
1.      File Transport System.
Files are imported and exported into SAP XI OS Level for Development and Quality Server,
This Process is risky as there is no automated system and there is no track record of imported or Exported Files,
as in this syetem exported files are transported to QA System from DEV System.
file Extension in file transport System : - .tpz
2.     Through CTMS(Change Transport Managment System).
GUI Based tool, Installed on SAP XI BOX, This system provides the automated transport system , which keep tracks of transported Objects and Failed objects.
There are initial level efforts to set up transport system.
Transport Procedure for Various System :-
DESIGN OBJECTS ---> (ENTERPRISE SERVICE REPSITORY OBJECTS) -
> INTEGRATION BUILDER.
Step -I
1. Select NameSpace to trasport.
2. Right Click on NameSpace to Transport.
3. Select Export Option.
4. Check or Select the Software Component Version.
5. Check the Mode of transport.
CTS MOde:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF INDIVIDUAL NAMESPACE.
5.2        Select Transort request.
5.3      Finish the Process.
TRANSPORT USING FILE SYSTEM:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF INDIVIDUAL NAMESPACE.
5.2      Finish the Process.
Step II
1. GO TO TOOLS OPTION IN MENU BAR
2. OPEN CTS TRANSPORT ORGANIZER
3. Select the request to Release.
4. Press Button Release.
Step III( Steps to be Perform at Target System).
1. Execute Transection Code STMS.
2. Check your Transport Request Number.
3. Focus on that Trasport Request Number Through Mouse.
4. Now Import The Transport Request on Specific client of Target System.
5.Click Ok.
FINAL :- NOw on Quality Server all Transported Objects Need to be activated.
CONFIGURATION OBJECTS ---> (INTEGRATION DIRECTORY) -
> INTEGRATION BUILDER.
Step -I
1. Select Configuration Scenario to trasport.
2. Right Click on Configuration Scenario to Transport.
3. Select Export Option.
4. Check or Select the Configuration Scenario.
5. Check the Mode of transport.
CTS MOde:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF Selected Scenario.
5.2        Select Transort request.
5.3      Finish the Process.
TRANSPORT USING FILE SYSTEM:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF Selected Scenario.
5.2      Finish the Process.
Step II
1. GO TO TOOLS OPTION IN MENU BAR
2. OPEN CTS TRANSPORT ORGANIZER
3. Select the request to Release.
4. Press Button Release.
Step III( Steps to be Perform at Target System).
1. Execute Transection Code STMS.
2. Check your Transport Request Number.
3. Focus on that Trasport Request Number Through Mouse.
4. Now Import The Transport Request on Specific client of Target System.
5.Click Ok.
FINAL :- NOw on Quality Server all Transported Objects Need to be activated( CHANGE OBJECTS).

Error when transporting datasource and transformation from DEV to QA

I'm attempting to transport a DataSource that was converted to 7.0 from 3.x along with its transformation to QA I receive the following log error. I've most post in regards to very similar errors but nothing showing 'Errors occurred during post-handling RS_AFTER_IMPORT for RSDS L' what is this?
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 0R526789C2X70Q5XBGCAQ0G3Y4Q7LV9A
No rule exists
Saving Objects with Type Transformation
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Delete Mode)
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for RSDS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for RSDS L, date and time: 20071018113149
Post-import methods of change/transport request D30K913684 completed
     Start of subsequent processing ... 20071018113116
     End of subsequent processing... 20071018113149
Execute reports for change/transport request: D30K913684
Reports for change/transport request D30K913684 have been executed
     Start of................ 20071018113149
     End of.................. 20071018113149
Execution of programs after import (XPRA)
End date and time : 20071018113149
Ended with return code: ===> 8 <===

Hi Davis,
Before transporting transformation make sure either of source or target should availble in target system.
suppose you have a transformation between Data source and Data Target, first transport Data source, then transport Transformation along with data target.
Before tansporting Transformation either source or target should be avaialble in QA system..then only transportation will happen smoothly..
Hope this helps.
regards
SK

How to transport BO report from Dev to Qas

Dear all,
We have three clients for BO, Dev,Qas and Prd. When we transport the BO reports from Dev to Qas, the parameters in Universe and QAAWS won't be changed automatically,just keep the setting in Dev.
what can I do to change the setting automatically?
Best regards
Tianli

Hi,
you can ask basis to maintain logical system conversion settings .
However if you post the Query in BO forums you would get better response.
Regards,
Satya

Unable to transport Integratin Builder objects from Dev to QA correctly

Hi,
System : Pi 711 SPS03
SLD 7.1 with latest model and content
We are trying to transport Integration Builder Objects from Dev to QAS, but the SID translation from DEV to QAS is not working.
The interface is being imported as the source SID.
We checked the SLD configuration for Transport targets, that is when we realised the below issue.
Unable to Assign Business Systems in respective Business System Groups
The expected configuration of the SLD is as below:
UKD_400 - Integration Server for Dev PI 711 server
INTEGRATION_SERVER_UKQ - Integration Server for QAS PI 711 server
XI_QA - Business System Group for all Quality Systems in the landscape
          1) UKD_400
          2) UC1_ECC_60
          3) UED_400
XI_DEV - Business System Group for all Developement Systems in the landscape
          1) INTEGRATION_SERVER_UKQ
          2) UC2_400
          3) UEQ_400
We are unable to put the business systems in their respective groups
All the Business systems are either being assigned in XI_QA or XI_DEV
Please let us know if this is a product error in SLD 7.1, could not find any relevant notes
Thanks,
Govind
Edited by: Govind Prathi on Feb 12, 2010 10:25 PM
Edited by: Govind Prathi on Feb 12, 2010 10:27 PM

We have already assinged the Integration server to their respective business system groups while creating the Business system groups.
   BSG: XI_DEV --> UKD_400( Integration Server DEV )
BSG : XI_QA ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
Please help me understand if i am something in the configurations.
Thanks
Govind

Problems transporting objects from DEV to QAS

Hi everyone,
I have a problem trying to transport objects from an environment to another (DEV to QA) in XI. The issue is that the objects that were transported can't be visualized in the namespace; I checked the server log and it shows:
#2.0 #2011 04 12 14:48:55:730#0-500#Error#com.sap.aii.ibdir.server.abapcache.mapping.CacheMessageMappings#
#BC-XI#com.sap.xi.util.misc#002264940005022700000004000046FF#109943550000000004#sap.com/com.sap.xi.directory#com.sap.aii.ibdir.server.abapcache.mapping.CacheMessageMappings#PIISUSER#460#SAP J2EE Engine JTA Transaction : [6ffffff8dffffff9afffffffe0021ffffffd4]#0022649400051EE099A790C205DA1100#4DA4A4D6A0904660E1000000AC1D0177#AC1D017746594DA4AC8E000100000000#1#Thread[HTTP Worker [@678875548],5,Dedicated_Application_Thread]#Java##
error - some message mappings could not be read
Thrown:
com.sap.aii.ib.core.roa.RoaMultiObjectAccessException: Attempt to access the 10 requested objects on 10 failed. Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Message Mapping mm_CreateRequestSPLocalTotalSales | http://spsa.com/POS/TotalSales, type XI_TRAFO from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Object Message Mapping mm_CreateRequestSPLocalTotalSales | http://spsa.com/POS/TotalSales not found
com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Message Mapping mm_InsertTableVentaTotal_response | http://spsa.com/POS/TotalSales, type XI_TRAFO from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Object Message Mapping mm_InsertTableVentaTotal_response | http://spsa.com/POS/TotalSales not found
com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Message Mapping mm_SaveFileProcessesTotalSales | http://spsa.com/POS/TotalSales, type XI_TRAFO from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Object Message Mapping mm_SaveFileProcessesTotalSales | http://spsa.com/POS/TotalSales not found
com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Message Mapping mm_CheckDateProcessesResponse_To_StatementVentaTotal | http://spsa.com/POS/TotalSales, type XI_TRAFO from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Object Message Mapping mm_CheckDateProcessesResponse_To_StatementVentaTotal | http://spsa.com/POS/TotalSales not found
com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Message Mapping mm_CheckDateProcessesByStore | http://spsa.com/POS/TotalSales, type XI_TRAFO from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Object Message Mapping mm_CheckDateProcessesByStore | http://spsa.com/POS/TotalSales not found
com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Message Mapping mm_CalculateFileProcesses | http://spsa.com/POS/TotalSales, type XI_TRAFO from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Object Message Mapping mm_CalculateFileProcesses | http://spsa.com/POS/TotalSales not found
com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Message Mapping mm_ExecuteSPLocalTotalVenta | http://spsa.com/POS/TotalSales, type XI_TRAFO from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Object Message Mapping mm_ExecuteSPLocalTotalVenta | http://spsa.com/POS/TotalSales not found
com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Message Mapping mm_TiendaPOS_To_InsertUpdateTotalSales | http://spsa.com/POS/TotalSales, type XI_TRAFO from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Object Message Mapping mm_TiendaPOS_To_InsertUpdateTotalSales | http://spsa.com/POS/TotalSales not found
com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Message Mapping mm_CheckDateByStore_Response | http://spsa.com/POS/TotalSales, type XI_TRAFO from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Object Message Mapping mm_CheckDateByStore_Response | http://spsa.com/POS/TotalSales not found
com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Message Mapping mm_SPLocalTotalVenta_response | http://spsa.com/POS/TotalSales, type XI_TRAFO from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Object Message Mapping mm_SPLocalTotalVenta_response | http://spsa.com/POS/TotalSales not found
     at com.sap.aii.ib.core.roa.RoaMultiObjectAccessException.newObjectAccessNotCompleted(RoaMultiObjectAccessException.java:98)
     at com.sap.aii.ib.core.roa.RoaServiceImpl.createObjectArrayFromRoaOutput(RoaServiceImpl.java:351)
     at com.sap.aii.ib.core.roa.RoaServiceImpl.readObjectsImpl(RoaServiceImpl.java:256)
     at com.sap.aii.ib.core.roa.RoaServiceImpl.readObjects(RoaServiceImpl.java:367)
     at com.sap.aii.ibdir.server.abapcache.mapping.CacheMessageMappings.addContent(CacheMessageMappings.java:104)
     at com.sap.aii.ibdir.server.abapcache.mapping.CacheMessageMappings.addContent(CacheMessageMappings.java:66)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:480)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.processHTTPRequest(CacheRefreshRequest.java:210)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.handleHTTPRequest(CacheRefreshRequest.java:135)
     at com.sap.aii.ibdir.server.abapcache.HmiMethod_CacheRefresh.process(HmiMethod_CacheRefresh.java:70)
     at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:167)
     at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:212)
     at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:98)
     at sun.reflect.GeneratedMethodAccessor375.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
     at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
     at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
     at $Proxy1696.process(Unknown Source)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:331)
     at com.sap.aii.utilxi.hmis.web.workers.HmisExternalClient.doWork(HmisExternalClient.java:100)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:532)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doGet(HmisServletImpl.java:676)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81)
     at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:124)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:461)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
     at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:243)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247)
     at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
I hope anyone can help me with this.
Regards,
Julio

Hi,
The problem is that I can't transport any object (Datatypes, message types, service interface, message mapping, etc.) in XI from DEV to QAS.
I did all the steps to transport objects:
1. Export the objects from XI-DEV
2. Import them in XI-QAS
3. A message of successfull import is shown; however the objects can't be visualized. When I check the log it shows the message that I copied in my previous post.
Hope you can help me.
Thanks.

Transporting a role from DEV to QAS in a Workflow

Hi,
I assigned a Role as the possible agent for a std task in DEV. I transported from DEV to QAS, first the Role (where I see the Std. task to which it is assigned and the corresponding WF template in PFCG for the role) with a Customizing Req. and then transported the WFlow template & associated std.task with a WBench TReq.
The transport is successful without any errors.
But, when I see the agent assignment for the task in QAS, the role is gone. Also, When I see the role Maintenance PFCG for this role, I don't see any WFlow tasks in the Workflow tab.
I tried to trasport this sequence(first role and then the wflow & std. task associated with it) twice, but in vain.
Can somebody pl tell me what's going on with the transport of the roles(that should include the wflow tasks & templates).
Thanks in advance
venu

Mike,
Infact I did first time transport in the sequence of WB req and then Cust. Req. It didn't help and then I tried the other sequence too.
And Could you tell me how to look into the WF configuration of the system to see if it is set to transport the Roles?
Actually, i tried transporting 3 roles under one Cust. Tran.Req, but only one Role got transported correctly and the rest two have been failing.
Pl. tell me if I am doing it correctly...
thank you
venu

How to tranport XI config from DEV to QAS or PRD

Dear Sir,
We would like to know How to tranport XI config from DEV to QAS or PRD
Thank you and best regards,
Vimol

Hi,
Check some links on transporting Objects.
Transporting IR,ID Objects using File System
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

Process chain transport in BI7.0 from DEV system to PROD system

Hi experts,
I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
1) create the same process chain in Production system directly or,
2) should i transport the same process chain to production system, i created in the development system.
and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
thanks in advance for all your expertise experienced help.

It is always advisable to transport the process chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
Hope this is clear now.

How to transport an existing infopackage from dev to quality?

Can anyone pls give me the steps for transporting an existing infopackage from dev to qual?
I am not finding any infopackage in RSA - TRANSPORT CONNECTION
Points guranteed.

Here is the steps:
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infopackage' and 'select objects'. Do a search here with your IP technical name.
3. then choose your IP and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request. Repeat the same steps with grouping 'in dataflow before'
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
9. If everything is ok, release your request and ask your basis/security guy to move to QA.
Also you can open your InfoPackage and click on the truck symbol directly from IP window.
Hope it helps..

What is the best methid to do copy from dev to qas with min downtime

hi
can any one tel the best(i mean with min downtime) for copying from dev to qas plsss

Hi,
If it is Oracle then Backup/Restore and if MSSQL then Homogenious system copy Attach/Detach
Hope this will help.
Best Regards,
Sachin.

Notification about errors during transport from DEV to QAS server.

Hi Guys.
Is there any way of alerting the user about the errors that arise when moving the transaction from DEV client to QAS client?
For Instance,In DEV the program may be working fine and while transporting sometimes errors can arise by not including all the necessary files while moving to QAS server.
Kind of auto-email facility notifying the user...

Hi,
there might be some standard functionality for TMS but if you can't find anything then you can still use BADI CTS_IMPORT_FEEDBACK. The only method if this BADI is called right after import of each transport.
Cheers

Transport Questions and Questionnaires from Dev to QAS or to PRD

Similar Messages

Maybe you are looking for