Transport queue gets closed very often

We found out transport queue gets closed very often on QAS system. We open it.
However what is the reason. Could it be because of an job is sheduled to import every 15 minutes. or is it something wrong

Hello Jan,
Yes, its expected behavior because when import runs, TMS lock the import queue for avoiding incosistency.
As long as the import is running or is scheduled, you see this status is displayed in the Import Overview with either This graphic is explained in the accompanying text or This graphic is explained in the accompanying text. After the import, the import queue is opened again automatically by the transport control program.
http://help.sap.com/saphelp_nw04/helpdata/en/c6/ea253715dfb808e10000009b38f889/frameset.htm
Regards,
Debasis.

Similar Messages

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

In my iPad the following apps are getting crashed very often, chrome, You Tube, gmail, google search. Please let me know how to fix it

In my iPad the following apps are getting crashed very often, chrome, You Tube, gmail, google search. Please let me know how to fix it

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

I put iPod on "songs, shuffle" but the shuffle isn't random! Same artist repeats often, same songs repeat before other songs are played. With over 2000 songs on the iPod, I shouldn't be getting repeats very often. Anybody else?

I put iPod on "songs, shuffle" but the shuffle isn't random! Same artist repeats often, same songs repeat before other songs are played. With over 2000 songs on the iPod, I shouldn't be getting repeats very often. Anybody else?

Shuffle is not perfect. What you are experiencing is normal.

InDesign getting hanged very often

Hello All,
We recently upgraded our license from CS4 to CS5.5 and found that InDesign is getting hanged very often during find & replace, loading XML files, etc. Actually we faced like this issue in CS3, and when we upgraded to CS4, this issue was found resolved. But now again facing the same hanging issue, can anyone of you facing this issue or let me know how we rectify this issue?
Please respond at the earliest, since we are planning to upgrade many licenses.
Thanks,
Praveen

We don't have enough information to say with any reliability.
To know, you would need to see the stack trace associated with the process.
Under XP, that is easy. Under Windows 7, it is hard. You can try installing DRWTSN32 from an XP system, or you can try installing WinDBG. Both of these are not turnkey solutions that work easily, and if you get stuck, there is only very limited help. Try finding a Windows systems programmer to help you.
But yes, it is most *likely* (I would say 14 times out of 15) that this is InDesign's fault.

Stock transport order getting closed with partial delivery

I have a problem here .Stock transport Order gets automatically created in SAP ( by means of inbound IDOC).
Suppose the STO Quanity is 10 pcs and delivery note is of just 5 PCS.
The STO Purchase Quanity changes to delivery note Quanity i.e 5 pcs and changes the status of the STO to close .
Delivery note also gets created automatically by incoming IDOC.
I think this is a problem with some custom program logic which processes the delivery note for the STO,
Anyone who has faced this scenario before , pls help whether this is SAP standard ??????

I am not sure because what happens is if order quanity is 10 pcs and delivery note is 5 pcs , the PO order Qty changes to 5 pcs and gets closed,
I think this is not SAP standard and hence it could be related to some ABAP Program behind.
Please clarify.

My i6 get hanged very often

my i6 get hanged very often

Hi Vinzgenius,
Welcome to the Apple Support Communities!
It sounds like your iPhone is becoming unresponsive. Please follow the troubleshooting steps outlined in the attached article for help resolving this issue.
iOS: Not responding or does not turn on - Apple Support
Best regards,
Joe

Oraarch file getting generated very often in /oracle/ SID /oraarch/

Dear All
I am facing a problem of getting oracle archive (oraarch) generated very frequently nearly 50MB file in less than a minute due to which my Filesystem capacity of Oraarch is getting full soon.
I have monitored there is no any batch job, Upload job, or any loaded job going even in Idle time in late night the same frequency of Archival is going so in a duration of 6-7 hours i am getting the total archive of 50GB.
I have Oracle 10g Patch Set 10.2.0.4.0 and all the 39 Patches & 2 CPU Patches applied by Opatch & MOPatch and all the Oracle 10g Parameter are set as per the note 830576.
Can you please let me know what can be the issue?
Thanks & Best Regards
Rahul

You probably have statistics being populated and AWR running. Oracle 10g has system jobs that are set to run frequently (i.e. every hour, every night, etc).
column repeat_interval format a70
select job_name, repeat_interval, enabled from dba_scheduler_jobs;
column what format a50 word_wrapped
select job, last_date, next_date, broken, what from dba_jobs;
50mb is probably too small for your environment. You'll probably want to at least double that... at least.
And if your oraarch is filling up so frequently you should consider increasing the space of oraarch. It sounds like your system is much busier than you expected.
Run this command to get an idea of what Oracle recommends for your redo log file sizes...
SELECT TARGET_MTTR,ESTIMATED_MTTR,WRITES_MTTR,WRITES_LOGFILE_SIZE, OPTIMAL_LOGFILE_SIZE FROM V$INSTANCE_RECOVERY;
If that doesn't work it's probably because you're not using the system parameter fast_start_mttr_target... which I guess is something SAP advises against using? I'm an Oracle DBA but a SAP newbie so I'm still learning what parameters SAP wants me to set and why
Hope that helps..
Rich

Windows getting hanged very often

Log Name: System
Source: EventLog
Date: 2/3/2015 11:02:13 AM
Event ID: 6008
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: HP800RAVW7
Description:
The previous system shutdown at 19:27:49 on ?02/?02/?2015 was unexpected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="EventLog" />
<EventID Qualifiers="32768">6008</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-03T11:02:13.000000000Z" />
<EventRecordID>30418</EventRecordID>
<Channel>System</Channel>
<Computer>HP800RAVW7</Computer>
<Security />
</System>
<EventData>
<Data>19:27:49</Data>
<Data>?02/?02/?2015</Data>
<Data>
</Data>
<Data>
</Data>
<Data>17646</Data>
<Data>
</Data>
<Data>
</Data>
<Binary>DF0702000100020013001B003100AC01DF0702000100020013001B003100AC01600900003C000000010000006009000000000000B00400000100000000000000</Binary>
</EventData>
</Event>

Hello Rassh,
Please take a look at the following thread similar to this issue.
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/unexpected-shutdown-event-id6008/0790ff7c-76cd-4bfe-8202-a3d0c08c49ea
Please take the following steps for troubleshooting:
1. Use the task manager to check which process or program occupy large amount of system resource
2. Update the hardware drivers from the manufacturer website
3. check if PSU (Power Supply Unit) is functioning properly.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

Anyone have any suggestions? or is everyone else just as clueless as me !

Delete button is getting grayed out very often in SMS

Delete button is getting grayed out very often in SMS section.. Screen also flicker at times...

Correct, it is not grayed out. A table uses a combination of renderers to display the data in each cell of the table. So there is no easy way to do this. You would need to provide custom renderers for each column of the table. You could easily "gray out" text cells, but what if a cell contains an image.
If all your cells are text based then you might be able to get away with overriding the prepareRenderer(...) method and simply change the foreground to a "gray" color. This posting should get you started:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=610474

My MacBook Pro mid 2012 laptop continuously lags on every web site and I get the spinning beach ball very often but when I log in as a guest, everything works fine. What should I do to fix this?

My MacBook Pro mid 2012 laptop continuously lags on every web site and I get the spinning beach ball very often but when I log in as a guest, everything works fine. What should I do to fix this?

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Very often I get a contact error message when I try to use my contact list to send an e mail. If I use internet exployer I don't have a problem, so it can't be a problem with aol.

Very often I get a contact error message when I try to us my contact list to send an e mail. If I use internet exployer I don't have a problem, so it can't be a problem with aol..

See this support article - https://support.mozilla.org/en-US/kb/change-program-used-open-email-links

Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

HELP! i can't get ANYTHING done in the new muse - keeps closing. once it crashes - i can't get the file back open!
i've lost all my work!
from my desktop - when it stared happening was with the updated version:
Logging in build 2014.2.1.10 started at: Mon Nov 03 13:36:38 2014
========================================
[00:00:42.416] Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:success size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014 highestUID: 3548
[00:01:03.898] Preparing to Save As over "\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse" exists: true
[00:01:17.516] SaveAs complete for file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' file size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highest UID:3551
Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Build 232: Mon Nov 3 19:41:07 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Build 232: Mon Nov 3 19:41:21 2014 UTC: Error: CSI: IMS: Connect: Error Code: I-200 Error Message: No Account
Build 232: Mon Nov 3 19:41:21 2014 UTC: Unknown IMS error 'SHARED_NOACCT_ERROR' has occurred when retrieving IMS token.
Build 232: Mon Nov 3 19:41:57 2014 UTC: Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version. size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014
Build 232: Mon Nov 3 19:41:57 2014 UTC: This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version.
Logging in build 2014.2.1.10 started at: Mon Nov 03 13:43:17 2014
========================================
[00:00:21.481] Opening file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' with status:success size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highestUID: 3551
[00:00:30.373] AssertInDebug: Unable to run recovery. User file remains locked after 5 second pause.-assertInDebugOnly+DataBase/recover+MuseSite$/recover+MethodInfo-2886+DataBase$/run Recovery+apply+UIComponent/callLaterDispatcher2+UIComponent/callLaterDispatcher+end stack
[00:00:30.404] Failed to recover file:\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse
[00:00:30.420] Calling openConnection for file that doesn't exist? C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ Parent folder exists.
[00:00:34.429] open of SQL connection failed for C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ
[00:00:34.429] Failed to open mini-save connection B "C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ" Doesn't exist. Folder exists. error:SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'
[00:00:34.429] EXCEPTION:[SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'-SQLConnection/internalOpen+SQLConnection/open+DataBaseConnectionWrapper/o penConnection+MethodInfo-28954+EventDispatcher/dispatchEventFunction+EventDispatcher/dispa tchEvent+MethodInfo-28938+end stack
[00:00:34.445] AlertAndExit because of: [SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'

Browser gets closed abruptly producing 'Program Error' on launched browser

Hi all,
I have a applet program (code copied below). The applet just launches a test frame. The applet is launched by clicking on a 'launch' button in a browser(either Netscape or Mozilla).
When user closes the frame by clicking on frame close icon, the applet's stop() is invoked. In applet's stop, there are some system resource cleaning code and code for closing the applet window.
But when user closes the frame, and before applet window gets closed, if user again clicks on 'launch' button in the parent browser, the whole browser gets closed abruptly producing a Program Error saying 'Netscp.exe has generated errors and will be closed by windows. You will need to restart the program' in case of netscape browser. The same happens for mozilla browser too.
what is the problem here?
how to fix it...
please help...
-thx,
Soni.
(To execute this plugin.jar of jdk is required)
import javax.swing.JApplet;
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import netscape.javascript.JSObject;
public class SampleApplet extends JApplet implements ActionListener{
     protected JButton closeButton = null;
     protected JSObject win = null;
     private JFrame frame = null;
     public void init(){
          this.win = JSObject.getWindow(this);
          this.closeButton = new JButton("Close Browser Window");
          //this.add(this.closeButton);
          //this.closeButton.addActionListener(this);
          frame = new JFrame("Test Frame");
          frame.setSize(300, 400);
          frame.addWindowListener(new WindowAdapter() {
               public void windowClosing(WindowEvent e) {
System.out.println("windowClosing");
                    SampleApplet.this.stop();
          frame.show();
     } // ends init(void)
     public void actionPerformed(ActionEvent ae){
          //this.win.eval("self.close();");
          //closeLaunchedBrowser();
          stop();
     private boolean alreadyClosed = false;
     public void stop() {
          if (!alreadyClosed) {
               alreadyClosed = true;
               closeLaunchedBrowser();
               frame.dispose();
               System.gc();
               System.runFinalization();
     private void closeLaunchedBrowser() {
          final SampleApplet thisObject = this;
          Runnable r = new Runnable() {
               public void run() {
                    try {
                         JSObject win = (JSObject)JSObject.getWindow(thisObject);
                         if (win != null && win.toString() != null) {
                              //win.eval("top.opener=self;self.close();");
                              //win.call("close", null);
                              win.eval("self.close();");
                    } catch (Exception e) {
          Thread t = new Thread(r);
          t.start();
} // ends class CloseApplet
//////////////////////////////////////////////////////

not at all since it only causes problems.
It works relativly stable on IE (since its an very old browser not updated since a long time -> SUN was able to work arround all the open IE bugs) but all other browsers cause troubles, call it opera, safari, konqueror or all the others.
The problem is that the plugin-interface requires a lot of interaction between the jvm and the browser and since browsers change very often it seems almost impossible to guarantee compatibility.
Sometimes it works, sometimes not, sometimes its just broken in one version and works in an older one.
I would suggest to stay away from java->javascript or the other was round...
lg Clemens

Transport queue gets closed very often

Similar Messages

Maybe you are looking for