Transport Related Problem

Hi,
I have a Demo Server. I have configured stms by adding a virtual system. I have created a Transport Request and released it. Now I want it to show in the import queue of my system. So I am adding it manually via transaction stms_import --> Extras --> Other Requests --> Add.
But its giving error :- Transport control program tp ended with error code 0247**
**Errors: addtobuffer has problems with data- and/or cofile
So, I tried to Add it manually from OS via command:-
tp addtobuffer <Req No> <SID> Client=100 pf=/usr/sap/trans/bin/TP_DOMAIN_DV1.PFL
This time it is sucessful and I can see it in the import queue.
I want to know why it is not happening through SAP.
I have tested the following things:-
1. Trans_DIR - Its set in domain.pfl. Path is correct.
2. Tp test - It showing OK
3. Connection Test - Ok
4. Stms is configured. Routes are designed.
Kindly help.
Thanks,
Santanu

I assume that 'virtual' system as QA.
So you have setup TMS using that real DEV and virtual QA. You setup transport route, create a transport and release it.
The time when you release the transport, it is already applied now in DEV. Why it should be there in DEV Import queue then ? It would be shown in that Virtual system's Import queue (second system/QA) but not in dev import queue.
In any case you need not to 'apply/import' that transport 'again' in DEV, when it is already created and released from DEV.
Thanks

Similar Messages

Km transport related problem

Hello guys,
I have done the offline transport of km data, and as the SAP documentation says only ACL's get transported. The problem is the we are not getting the collaboration tab in folder or document details property.
We are only getting View, Actions and Settings.
I guess this problem is due to ACL so i tried giving FULL CONTROL to a user but its not working? Also in the Settings tab it only shows few options like propeties permissions versioning and templates.

I assume that 'virtual' system as QA.
So you have setup TMS using that real DEV and virtual QA. You setup transport route, create a transport and release it.
The time when you release the transport, it is already applied now in DEV. Why it should be there in DEV Import queue then ? It would be shown in that Virtual system's Import queue (second system/QA) but not in dev import queue.
In any case you need not to 'apply/import' that transport 'again' in DEV, when it is already created and released from DEV.
Thanks

Problem description: I have ordered a new iMac but my current one seems to be running very slowly. I believe it to be a memory related problem but can't seem to identify what is causing it. Help is greatly appreciated.

Problem description:
I have ordered a new iMac but my current one seems to be running really slowly. I believe it to be a memory related problem but can’t seem to identify what is causing it. Your help is greatly appreciated.
EtreCheck version: 2.1.8 (121)
Report generated March 7, 2015 at 4:01:26 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (24-inch, Early 2008) (Verified)
    iMac - model: iMac8,1
    1 2.8 GHz Intel Core 2 Duo CPU: 2-core
    2 GB RAM Upgradeable
        BANK 0/DIMM0
            1 GB DDR2 SDRAM 800 MHz ok
        BANK 1/DIMM1
            1 GB DDR2 SDRAM 800 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    ATI Radeon HD 2600 Pro - VRAM: 256 MB
        iMac 1920 x 1200
System Software: ℹ️
    OS X 10.10 (14A389) - Time since boot: 23 days 18:5:35
Disk Information: ℹ️
    ST3320820AS_Q disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 319.21 GB (195.05 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    HP Officejet 6000 E609n
    Apple, Inc. Keyboard Hub
        Primax Electronics Apple Optical USB Mouse
        Apple, Inc Apple Keyboard
    Apple Inc. Built-in iSight
    Western Digital External HDD 500.11 GB
        My Passport (disk1s1) /Volumes/My Passport : 500.11 GB (200.60 GB free)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Popcorn 4/Popcorn.app
    [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
Problem System Launch Agents: ℹ️
    [killed]    com.apple.accountsd.plist
    [killed]    com.apple.AirPlayUIAgent.plist
    [killed]    com.apple.bird.plist
    [killed]    com.apple.CalendarAgent.plist
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.cloudd.plist
    [killed]    com.apple.cmfsyncagent.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.coreservices.uiagent.plist
    [killed]    com.apple.EscrowSecurityAlert.plist
    [killed]    com.apple.nsurlsessiond.plist
    [killed]    com.apple.pluginkit.pkd.plist
    [killed]    com.apple.printtool.agent.plist
    [killed]    com.apple.rcd.plist
    [killed]    com.apple.recentsd.plist
    [killed]    com.apple.sbd.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.secd.plist
    [killed]    com.apple.security.cloudkeychainproxy.plist
    [killed]    com.apple.spindump_agent.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    22 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.AssetCacheLocatorService.plist
    [killed]    com.apple.awdd.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.diagnosticd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.GSSCred.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.nsurlsessiond.plist
    [killed]    com.apple.periodic-daily.plist
    [killed]    com.apple.periodic-monthly.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.softwareupdated.plist
    [killed]    com.apple.spindump.plist
    [killed]    com.apple.tccd.system.plist
    [killed]    com.apple.wdhelper.plist
    [killed]    com.apple.xpc.smd.plist
    [killed]    org.cups.cupsd.plist
    20 processes killed due to memory pressure
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.sonos.smbbump.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    Jawbone Updater    Application (/Applications/Jawbone Updater.app)
    Dropbox    Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
    Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    CitrixICAClientPlugIn: Version: 11.2.0 [Click for support]
    iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
    Citrix Online Plug-in [Click for support]
    Flash Player [Click for support]
    UE Smart Radio [Click for support]
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 319.21 GB Disk used: 124.16 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 3.00 TB
        Total number of backups: 98
        Oldest backup: 2013-08-28 05:45:36 +0000
        Last backup: 2014-12-30 19:39:32 +0000
        Size of backup disk: Excellent
            Backup size 3.00 TB > (Disk size 319.21 GB X 3)
Top Processes by CPU: ℹ️
         5%    com.apple.WebKit.Plugin.64
         3%    WindowServer
         2%    sysmond
         0%    AppleSpell
         0%    com.apple.WebKit.Networking
Top Processes by Memory: ℹ️
    41 MB    Finder
    41 MB    iTunes
    37 MB    Safari
    32 MB    com.apple.WebKit.Plugin.64
    32 MB    mds
Virtual Memory Information: ℹ️
    53 MB    Free RAM
    501 MB    Active RAM
    463 MB    Inactive RAM
    398 MB    Wired RAM
    78.46 GB    Page-ins
    3.04 GB    Page-outs
Diagnostics Information: ℹ️
    Mar 7, 2015, 12:41:34 PM    /Library/Logs/DiagnosticReports/Inkjet4_2015-03-07-124134_[redacted].crash
    Mar 5, 2015, 07:42:29 PM    /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-05-194229_[ redacted].crash

That certainly looks like a low memory issue, 2 GB ram is barely enough to run Mac OS X versions from Lion through Yosemite. The high number of Page Outs and killed processes show very high memory pressure.
Try adding memory, but be sure it is high quality, Mac certified memory such as that from OWC, http://www.macsales.com or Crucial, http://www.crucial.com

Transportation Related DO - should only be procssed with shpmnt doc created

I have 2 types of sales order.
1) one sales order "ZDIR-direct sales" does not requires transportation (Shipment document) thus the process related to it is sales orde - > Delivery order -> PGI -> invoice
2) other Order type is "ZTRN - Transportation related" for which the process flow will be SO - > DO - > Shipment Document - > PGI -> Invoice
Now how can i control that all the sales through ZTRN order type should only be processed via shipment documnet. right now when in ZTRN sales mode, user can click on PGI in its DO and thus can invoice...Thus the shipment document is bypassed and pgi is directly carried out in DO.
Inshort, is there any control in starndard system that transportation related DO cannot be processed without shipment document.
Hope my query is clear
Thanks in advance.

Hi
SAP enhancement V56L0001 (use transaction SMOD to use this user exit)
The system calls this user exit in function module:
=> SD_DELIVERY_SHIPMENT_STATUS.
You can use the source code in this function module as a template.
regards,
Ramana

GUI related problem in solaris 8 02/04

Hello all,
I am facing GUI related problem in the software running on solaris when I upgraded from solaris 8 02/02 to 8 02/04.
The GUI which was working fine on 02/02 was giving some menu selection problem in 02/04. In GUI applications i was unable to select items after double clicking it in solaris 8 02/04 while it was working fine in solaris 8 02/02.
Are there any O.S. related problem?
Thanks and regards,
Ankit

Wolfgang073 wrote:
Hi guys and ladys!
I added the LD_LIBRARY_PATH, Why are you doing that. It's probably a bad idea.
but the Openwindows not run OK (e.g. start cmdtool window without csh % prompt etc.).That's very possible. Don't make global changes to LD_LIBRARY_PATH (by putting in your login files for example). Instead if you need it to run a particular program, make a wrapper that sets the variable and then calls the program. That will limit the scope of those changes.
vi .login
# Erasing LD_LIBRARY_PATH
setenv LD_LIBRARY_PATH
# Important Paths set
setenv LD_LIBRARY_PATH /usr/ucblib:$LD_LIBRARY_PATHDon't do that.
Darren

[Solved] Can't upgrade system - cups related problem

Hi,
I can't upgrade (pacman -Syu) my system due some cups related problems.
AS you can see, although the problem seems to be cups related, none of the other packages has been upgarded as well.
Please advise.:mad:
Thanks,
Michael Badt
Here's a copy of my terminal (all packages get downloaded):
Targets (10): dbus-core-1.2.24-1 bluez-4.63-1 libcups-1.4.2-5 cups-1.4.2-5 dbus-1.2.24-1 gsfonts-1.0.7pre44-2 openssl-0.9.8n-1 net-snmp-5.5-2
pcre-8.02-1 xine-lib-1.1.18.1-1
Total Download Size: 0.00 MB
Total Installed Size: 52.32 MB
Proceed with installation? [Y/n] y
checking package integrity...
(10/10) checking for file conflicts [############################################################################################] 100%
error: failed to commit transaction (conflicting files)
cups: /etc/cups/printers.conf exists in filesystem
cups: /etc/cups/subscriptions.conf exists in filesystem
Errors occurred, no packages were upgraded.
Last edited by mibadt (2010-03-27 02:39:30)

Well it sort of did, but I have to admit I had to check the forums before continuing...the messages I received were:
error: failed to commit transaction (conflicting files)
cups: /etc/cups/classes.conf exists in filesystem
cups: /etc/cups/printers.conf exists in filesystem
cups: /etc/cups/subscriptions.conf exists in filesystem

A troublesome algorithm-related problem

Hello all:
Sorry for cross-posting...but can I draw your kind attention to http://forum.java.sun.com/thread.jspa?threadID=633438&tstart=0 on which an algorithm-related problem is stated. If you wish to give a hand, please do it there to avoid scattering all useful thoughts.
Thanks

Hello all:
Sorry for cross-posting...but can I draw your kind attention to http://forum.java.sun.com/thread.jspa?threadID=633438&tstart=0 on which an algorithm-related problem is stated. If you wish to give a hand, please do it there to avoid scattering all useful thoughts.
Thanks

Transport Stream Problems

My compressor keep locking up when I set it to export in "MPEG-2/Transport Stream" setting. I would like to export in this setting because I believe that this is how Toast encodes to BluRay.
Any ideas/thoughts/solutions?
Go Hornets!

I'm not sure about your transport stream problem, but Toast doesn't need it; it will use its AVCHD encoder on a regular QT movie; I exported a self contained QT movie from an FCP timeline, dragged it into the Toast window, and let it encode; it worked well.
If you send Toast a previously compressed file, it will encode it again in the AVCHD format, probably at a loss of quality.
Toast can burn the Blu Ray format to a standard DVD, giving you about 30 minutes of HD footage, and using your standard DVD burner.

HT4623 my husbands iphone4 was dropped and it doesnt work now... according to powermac representative, hardware related problem, what should i do? anybody knows where to bring the unit for repair, because powermac didnt accept it.

my husbands iphone4 was dropped and it doesnt work now... according to powermac representative, hardware related problem, what should i do? anybody knows where to bring the unit for repair, because powermac didnt accept it.

Who is powermac? Are they and authorized iPhone sales site?

Transport tablespace related problem

Hi all,
I have a problem i want to export tablespaces as i have to migrate my db from oracle 9.2 to oracle 10.2 from win to RHEL4.......but i am getting an error ,pls suggest me for the same....
SQL> @G:\oracle\ora92\rdbms\admin\dbmsplts.sql;
Package created.
Package created.
Grant succeeded.
Package created.
Grant succeeded.
drop view sys.transport_set_violations
ERROR at line 1:
ORA-00942: table or view does not exist
PL/SQL procedure successfully completed.
drop table sys.transts_error$
ERROR at line 1:
ORA-00942: table or view does not exist
Package created.
SQL> exec sys.dbms_tts.transport_set_check('SRO',true);
BEGIN sys.dbms_tts.transport_set_check('SRO',true); END;
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.DBMS_TTS" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
SQL> desc dbms_tts
PROCEDURE DOWNGRADE
FUNCTION ISSELFCONTAINED RETURNS BOOLEAN
Argument Name                  Type                    In/Out Default?
TS_LIST                        CLOB                    IN
INCL_CONSTRAINTS               BOOLEAN                 IN
FULL_CHECK                     BOOLEAN                 IN
PROCEDURE KFP_CKCMP
PROCEDURE TRANSPORT_SET_CHECK
Argument Name                  Type                    In/Out Default?
TS_LIST                        CLOB                    IN
INCL_CONSTRAINTS               BOOLEAN                 IN     DEFAULT
FULL_CHECK                     BOOLEAN                 IN     DEFAULT
SQL> exec dbms_tts.transport_set_check('SRO',true);
BEGIN dbms_tts.transport_set_check('SRO',true); END;
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.DBMS_TTS" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1

Are you,by any chance, running Oracle 9i installation code in an Oracle 10g database?
If so : why?
As far as I know you can only transport tablespaces to a database of an identical version, so it looks like this is not going to work.
Sybrand Bakker
Senior Oracle DBA

Transport request problem with a ztable

Hello,
I have some problems releasing a customizing transport request. It contains "table contents" of a z table. This z table is marked as "customizing table" (option C).
Error message is "task desk900213 belongs to a different category"
Thanks.

Hi Alberto,
What type of request are you using. Also let me know the classification of task.
I mean if you a workbench request is giving this error then try using a customising one and if a customising one is giving this error try using workbench transport.
I guess this is related to the thread:
Re: change object transport order
Also I hope you have assigned a development class to the Z table.
Please award points accordingly.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

Transporting request problem

Hi experts,
I have a peculiar problem. I created a datbase table A and modifed a table B in DEV. The table A was cleared in testing , qa and the transport was released to prodcution. Unfortunately that request also had the modifications made to an another table B which were not finalised and the fn group of maintenance genrator of table B was deleted. Now we are not able to maintain table B in prodcution. Anyone have ideas regarding this. Plz help .

dear Anirvesh,
try regenerate the table maintenance generator in DEV server,
then check whether the object is complete in SE10 ,
if not, open the related function in SE80 and edit all included objects,
then transport the whole objects of table maintenance function to production.
It is suggested to always check the transport request object by using SE10 before transport it to production .
Rgds,
TSWINEDYA

Transport Monitor problem concerning Treo 680 and MacBook

When uninstalling Palm software from a MacBook, some people have found it impossible to reinstall Palm software successfully again. They also have a problem synching and a message that flashes up about a "Transport Monitor." May I ask someone who has successfully resolved this problem to post detailed instructions before I am forced to check myself into a psychiatric ward? Thank you.
james_palm680
Post relates to: Treo 680 (Unlocked GSM)

Hello James.
Check out the accepted solution on this page. I have had some success with those directions. If that doesn't work, you may want to see if the Bluetooth modem option is enabled as described in this post.
Hope one or both of those two links work for you.
Alan G

Transporting Customization Problem

Hi All,
I am facing a problem in Transporting Customization changes (deletion Customization) from Development Server to the Test Server.
We have same customization maintained in Dev Server and Test Server.
For Example
Initially:
House Bank BNK01 - payment is maintained in Country CN and this customization has been transported to the Test Server earlier.
But later this customization is deleted in the Development Server and this change shud be transported to the Test Server.
How can it be done?
I tried to add all the entries in the list(which does not contain the related House bank.ie.deleted) to the Transport Request and transported to the Test Server but customization in the Test server cant be deleted.
note:I need to clarify this first and only then i can tranport it to the production server.
Do clarify this.
Thanks & Regards
Ajoy

(1) Create the 'to be deleted' configuration again in Dev. This should create a transport A
(2) Come out of the screen entirely
(3) Delete the configuration - save this in transport B
(4) Move both A and B to Test.
What exact transactions are you referring to ? Some of them may not be transportable.
Good luck !

Mail app keeps crashing (and other related problems)

A few days ago, my Mail app began crashing on seemingly unrelated events, so I assume my data got corrupted. I won't explain all the scenarios because it's a complete mess. To keep it simple, I have only 2 accounts and they are both on Gmail, so no backups are needed. I'd like to try doing a complete wipe of all data that the Mail app uses and that should fix it.
What files/folders does Mail use? So far, I've found:
~/Library/Mail
~/Library/Containers/com.apple.mail
I've also seen someone mention ~/Library/Preferences/com.apple.mail.plist, but I don't have this file.
After deleting the above and creating my mail accounts, the crashes are back. The only possibilities I can think of are:
1. I haven't deleted EVERYTHING owned by Mail yet. <-- What other files/folders belong to the Mail app?
2. Mail is depending on something else on my system that is broken.
3. Mail app itself somehow became corrupted.
4. Something being synced from my Gmail is not properly being handled, resulting in a crash.
When this started happening (if it helps):
1 day after installing the OS X update 10.8.3 as well as MacBook Pro Retina SMC Update v1.1, my MBP froze as soon as I loaded League of Legends. This was followed by a reboot as I couldn't Cmd+Tab out of the game. I wasn't aware of the Force Close App shortcut at the time, so I used the power button. That was the only time this happened, and it has worked fine a few times after the updates were applied and also worked after the reboot following the freeze. Since that time, I have encountered another issue where just about all of my apps crashed simultaneously -- no 3D-accelerated apps were even running this time.
Since then, I've updated VirtualBox from 4.2.8 to 4.2.10 (seemed like something that could cause this weirdness as I always have a VM running) and have not had any problems except Mail crashing all the time.
This question is primarily about fully resetting the Mail app to clean settings/data, but any thoughts on what may have happened are also welcome

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Transport Related Problem

Similar Messages

Maybe you are looking for