Transport-release access
Hi all,
I want to release the request of other users but I am not able to do this.
Please can anybody tell me which authorization value I should include in which object to get this access.
> Now Run tx: sm59.
I think you meant transaction SU53 - which is the last failed authority-check information before running tcode SU53. This is not necessarily the object or values which infact is required or reason which is causing the failure to complete a given transaction.
Object S_TRANSPRT would be one you are looking for.
Similar Messages
-
Hi everybody,
I have an ocean in my mind!!! I know that it's something easy but I can´t clear it. May be you can bring light to me.
I have a Workbench transport release with many ABAP Programs. I released it for sending to QA environment. When I check the transport log I notice that some programs are in red (not all the ones that are inside the order).
My question is, I have to send back in another release all the objects or only the ones that has problems (the red ones)?
Thanks & many kind regards,
MM.Hi MMP,
the red ones could not be imported and activated for a reason. You can try again after finding the reason and correcting the situation.
It should not be required to repeat the transport for all objects, but it won't hurt.
Regards,
Clemens -
Transport Release runtime error in BPC Netweaver 10.1
Hi,
We are getting the following error while releasing the transport in SAP BPC NW 10.1 Development system
Category ABAP Programming Error
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RSBPCR_INTERNAL_EXCEPTION
ABAP Program CL_RSBPCR_RES_MANAGER=========CP
Application Component BW-PLA-BPC-INF-WP
Short Text
An exception has occurred that was not caught.
What happened?
Exception 'CX_RSBPCR_INTERNAL_EXCEPTION' was raised, but it was not caught
anywhere along the
call hierarchy.
Since exceptions represent error situations, and this error was not
adequately responded to, ABAP program 'CL_RSBPCR_RES_MANAGER=========CP' had
to be terminated.
We are on SAP BW 7.40 patch level 5. Could you please advice the reason for this?Hello,
so after implementing note 2050531 you should add the following entry in table UJPS_RESOURCE (caution I misspelled it earlier, it is not ups_resource).
You can do this through transaction SE16 -> enter UJPS_RESOURCE and hit Create Entries.
Fields MANDT and APPSET_ID should be filled with your BW System Client ID (i.e. 100) and your BPC Environment ID (i.e. ENVIRONMENTSHELL). The entries that appear to be empty should be left empty.
MANDT
APPSET_ID
RESOURCE_ID
TSTPNM
TIMESTMP
OBJSTAT
CONTREL
CONTTIMESTMP
OWNER
BWAPPL
ACTIVFL
PARENT_RES_ID
UPDATE_COUNTER
RESOURCE_TYPE
CREATE_USER
CREATE_TIME
ORIG_LANGU
OWNER_ID
OWNER_TYPE
Client ID
Your Environment ID
005056B236881ED38AE1D894578A8F97
0
ACT
0
3
0
FOLDER
0
E
005056B236881ED38AE1D894578A8F97
TEAM
After this you should be able to release your request.
Hope this is helpful. -
How to apply newly transported release strategy to existing POs ?
Hi,
We transported a new release strategy to production
The new POs created are catching the rel strat B if they meet criteria
But some of the existing POs also meet the criteria for B and they should also take up this new release strategy
We cannot change the POs in ME22N, busines refuses to make any change to POs
How can we apply our new rel strategy to these POs ? has the SAP provided any standard function module to report?
thank you
Bthankyou for the replies.
finally we got minor price change done manually in all the POs to get the new rel strategy on them
Open POs , no change done - Did not pick release strategy (then it was no problem at the first place)
Open POs , change done in price - picked the new release strategy
Open POs , no change done but click on 'check' button in change mode - Could not test this one bcoz all POs are now converted. But I put break point in save user exit (which also plays part in determining the new release strategy) it did not stop at the break point and I gave message 'No data changed' so I think this action will not redetermine release strategy. It was very useful if it did though.
thank you. -
Transport released it taking more time
Hi Every One,
As i want to transport the program with teir package , smartforms etc.
I created one transport request with transport of copies and include all package in that and released
Its taking more time
Status in the se01 showing request is released
log shows
Checks at Operating System Level 23.04.2010 12:45:48 (0) Successfully Completed
Pre-Export Methods 23.04.2010 12:45:54 (0) Successfully Completed
Checks at Operating System Level 23.04.2010 12:47:23 (0) Successfully Completed
Pre-Export Methods 23.04.2010 12:47:27 (4) Ended with Warning
Export 23.04.2010 15:28:29 Not yet executed
RDDIMPDP program is running parallel in background.
So what i have to check any suggestions please
Regards
ShashiHi Niraj,
i sheduled RDDIMPDP job for every 2 minute and it is running fine
what i done is i created another request and transported. its went fine and issue is solved.
but this request is still showing as before now i want to ckear this. how i can do this. shall i delete this request directly.. Any problem with this
I am pasting Log report last few lines
WARNING:
sapprd\sapmnt\trans\tmp\TRPKK900160.TRP is already in use (10), I'm waiting 4 sec (20100423124802). My name: pid 3788 on sapprd (APServiceTRP)
WARNING:
sapprd\sapmnt\trans\tmp\TRPKK900160.TRP is already in use (20), I'm waiting 1 sec (20100423124826). My name: pid 3788 on sapprd (APServiceTRP)
WARNING:
sapprd\sapmnt\trans\tmp\TRPKK900160.TRP is already in use (30), I'm waiting 4 sec (20100423124850). My name: pid 3788 on sapprd (APServiceTRP)
START INFORM SAP-SYSTEM OF TRP Q 20100423155230 BIPLAB sapprd 20100423155222
START tp_getprots TRP Q 20100423155230 BIPLAB sapprd 20100423155222
STOP tp_getprots TRP Q 20100423155240 BIPLAB sapprd 20100423155222
STOP INFORM SAP-SYSTEM OF TRP Q 20100423155240 BIPLAB sapprd 20100423155222
Regards
Shashi -
hello,
i have a scenario where in my project, the crm development is happening. and for a single object there are about 4 people are working and there is a single transport request with 4 different tasks. Now that each folks are working individually and completing there task.. Now the developer1 completed his task and what to test it in quality but on release of the transport it started giving implication due to other TR tasks.
Now we are unable to figure out how to resolove this activity where we can resolve this issue. also that there is yet another crm component the other 4 guys are working on..
please let me know how to resolve this issue?
best regards,
kandarajHi Kandaraj,
welcome to the club.
We had this trouble for years. Then they started to use SAP Solution manager, everybody got training courses on how to use and we can not create transport requests or transport them without creating a minimum of 3 Solution manager processes with a dozen or so steps and workflow and partner assignment and assignment of testers, developers, process administrators with approvals, releases, and and and guess what we got?
We have some 800% more of administrative overhead including full-time quaility managers.
And nothing is better than it was before:
We still face the task of unavoidable communication with people. I really hate all those developers, consultants and users.
Why can't the system do the job?
Have a nice weekend, live goes on.
Clemens -
Transport release tale long time
Hi Experts,
I am facing one very strange problem in our developement server. some of the transport request are taking very long time to release while some of the transport are getting released in desired time.
I have also tried to check the content of the transport request but found that some request having only single roles is taking around 20-25 mins to get released and some transports having 30 roles can be released in 5 mins.
Please help me to get out of this unexpected behaviour of the system.
Thanks,
SoniaHi,
I have faced similar kind of problem but In my case I was facing the problem with the TRs having Project defined or you can say that associated to a project.
Please let me know if you are also have projects defined for these troubled Transport requests?
With Regards,
Saurabh -
Transport Release Issue For Process Chain
Hi Gurus,
While trying to relase my request, which has Process Chain to be imported to testing environment i am getting a message like below:
Check Objects before release and msg as
key :R3TR TABU RSCOMPTLOGOT ERSPC*(Application Component Of Process Chain)
If i click release anyway the information i get is "You have to be an approver to bypass this check" and it is not released.
I have checked the request and it is consistent and "ok".
Not able to understand why i am not able to release this request.
Please guide me on this.
ThanksHi Vijay,
Can you check your process chain or any part of proce chain (diff process type) are not locked in two different transport request ?
If so then delete the object from one request and add same object in another request and release.
Regards,
Kiran -
Hi,
When i am trying to release a transport, I am getting the following error. I tried the first solution, but it is doing nothing. I don't understand the second solution. Could anyone help me on this as I am doing first time in my life transport management? ( i am really tired of learning sap skills, but on the other side it is really hard to get new jobs) Thanks,
Only edit objects from package Z_RFC in local requests
Message no. TK332
Diagnosis
Objects in package Z_RFC cannot be edited in transportable Workbench requests in the current system BAM. The transport routes are configured such that objects from package Z_RFC can only be edited in local Workbench requests.
System Response
The function terminates
Procedure
You have the following options:
If you want to transport objects in package Z_RFC into the target TE2 once only, without changing the configuration of the transport routes, then create a transport of copies in the extended view of the Transport Organizer (Transaction SE01). Go to the request overview and choose Request/task -> Object list -> Include objects to include your objects in this transport of copies.
If you would like objects in package Z_RFC to be transported generally into the target system TE2, contact your transport administrator. In this case, the configuration of the transport routes must be corrected in the Transport Management System (TMS). For details, see the documentation on the Transport Management SystemGo to SE80
Select Package
Type Z_RFC
AND CHANGE THE TRANSPORT LAYER TO CORRECT SYSTEM
Rgds
PR -
How to Transport Function/Access Risk History
Hi,
I have a requirement where i would need to transport the change history associated to a Function/Access Risk.I wanted to know whether i can really transport the change History of a RIsk/Function across landscape.I have tried performing a change on a Function and transported it individually fron the table which could not actually does not fulfill the requirement.Can you please help me understand if i really could transport the changes associated to a Function/RIsk made in one system across landscape either by transporting the rules or do we have any option which could actually transport the change history of a function/Risk.
Thanks,
Richard.Hello Richard,
According to one of the leading SAP consultants in this thread, the change history should also be transported with the rule set transport:
Best practice for ruleset development & maintenance - GRC10
I know I usually see the user ID of the person to have performed the latest change against a Function or Risk on the side columns with a date time stamp and recall that it does indeed show it from the changes transported from DEV to QA/PROD. What I have not bothered checking or paying attention to is if the whole change histoy is trasnported from DEV to QA. -
Transport Released to QAS in Error
I mistakenly released Some oneu2019s transport u201CRD1K930971 . I am not sure if it will have any ill effects in QAS or not.
Hi Experts,
Is there a way to fix that mistake?
Thanks,SirishaHi,
If you have not Imported this request in QAS, then there is no any problem,
regards,
sujeet -
Transport Release frequency for Authorization Roles
Hi,
At my present customer all system changes are transported via release management. The current frequency of releases is 2 times a year. This includes SAP support packages, customizing, abap AND authorization roles.
Now I would like to establish a different, quicker release 'speed' for authorization roles only (f.i. once a week).
I already motivated my request with many reasons (role changes can be considered as master data changes; the lack of speed leeds to insecure 'workarounds'; role management issues are 'redesigned' to user management issues; etc.) but what I am still looking for are reference documents, best practices, audit reports in which the same advise is described.
Could you please help me with my quest?
Thank you!
Kind regards,
LodewijkHi Lodewijk,
I agree, that is is useful to define a specific schedule for transporting roles in oposite to the schedule for updating the software, however, I do not have a document described some best practise. Anyway, the following link may help you to convince the management, that you can setup a process including 4-eyes checks on the transports:
[TMS Quality Assurance|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/9c/a544c6c57111d2b438006094b9ea64/frameset.htm]
Using this process you would accept transports only which cointains roles (R3TR ACGR...).
Kind regards
Frank -
Hello Gurus
How to find out the accurate RELEASE date and time of a Transport.
( Is there any table which will help me)
Can some one please help.
Thanks in Advance.
RegardsLook at E070,E071
E070-AS4date,e070-as4time -
Hello!
I have a question how to transport the release strategies (class, characteristics) from one client to another?
Is there any pogram through se38?
Thank you!Landra,
You can transport the release strategies configuration from one client to another, but class and characteristics you have to create in all client and it will be good, if you will create the class and characteristics before transporting the configuration.
Regards,
Manish -
Transport RELEASE copy ?
EXPERT!
One of our Functional Consultant who wrongly release the transport as local transport, Is it possible to make the copy of release transport or re-transport of release transport to QAS, which should be transport to Quality ?
Regards
Anwer Waseem
SAP BASISMate,
Create a request (cust / WB) in se09 or se10 specifying the correct traget then select your new tp and click on include button which you can see on the tool bar. once u click it will give u option to select so select the TP request option and then enter the tp number which was released in local and save it. All the content of that request will come and settle in new request. Release the task and request and then check in QAS.
If solved award points.
Cheers
Arun
Maybe you are looking for
-
Just Updated iTunes - No Longer Able to Convert Apple Lossless Format
I just installed the newest version of iTunes, version 9.1.0.79. I have a bunch of songs in the lossless .m4a format and I would like to convert them (or at least create versions of them) that are in mp3 format. The simple right click menu in the new
-
my flash player stoped working 2 days ago and i tryed all the tips and adviceto fix it /update it still stops instilation at 47 to 50%
-
Installment payment term with full tax in one installment
Hi, I have a requirement where customer is looking for a payment term which is like this 1. X% of invoice amount + 100% VAT amount due to XX days 2. rest of invoice amount due in YY days (No Tax) We can have a payment term with 'Installment Payments'
-
Hi, I'm still battling with this canvas. This code puts the text: "test from the canvas" on the screen on a grey background, OK, but I can't get it to do anything when I push a button. I know the button works. Any help? (ps this is not an applet)
-
Compatibility question and syncing
I plan to get a new laptop for work. Seeing as it will come with Mac OS X 10.5 Leopard and my iMac is running OS X 10.4.11 Tiger am I likely to have any issues with compatibility? Or should it work fine? I know that, in theory, it should be fine but