Transport RELEASE copy ?

EXPERT!
One of our Functional Consultant who wrongly release the transport as local transport, Is it possible to make the copy of release transport or re-transport of release transport to QAS, which should be transport to Quality ?
Regards
Anwer Waseem
SAP BASIS

Mate,
Create a request (cust / WB) in se09 or se10 specifying the correct traget then select your new tp and click on include button which you can see on the tool bar. once u click it will give u option to select so select the TP request option and then enter the tp number which was released in local and save it. All the content of that request will come and settle in new request. Release the task and request and then check in QAS.
If solved award points.
Cheers
Arun

Similar Messages

  • Transport release

    Hi everybody,
    I have an ocean in my mind!!! I know that it's something easy but I can´t clear it. May be you can bring light to me.
    I have a Workbench transport release with many ABAP Programs. I released it for sending to QA environment. When I check the transport log I notice that some programs are in red (not all the ones that are inside the order).
    My question is, I have to send back in another release all the objects or only the ones that has problems (the red ones)?
    Thanks & many kind regards,
    MM.

    Hi MMP,
    the red ones could not be imported and activated for a reason. You can try again after finding the reason and correcting the situation.
    It should not be required to repeat the transport for all objects, but it won't hurt.
    Regards,
    Clemens

  • Transport Request copy between clients in the same system

    I have one workbench request needs to transported across all our client in the QA system
    Development system has 3 clients - D001,D002,D003(client)
    I am supposed to do the development works in the D001 client.
    Unfortunatel I did in the D002 client.
    But our transport route is D001 --->Q001only.
    Is their any way I can copy the Transport request from D002 to D001 and then release D001-Q001.
    I am able to repeat the same work relevant to D002 client.But there is no transport request is creating for the new
    work in D001.
    Please advise on this.
    Advance Thanks

    Hi,
    You cannot copy a transport request from one client to another. Try to make a client copy so that the changes you made to D002 client will get effected in D001.
    Hope this helps.
    Assign points if useful.
    Venkat

  • Transport request copy

    Hi all
    PLease help us out.
    We have released a BI request for transportation which is a local request(Which we couldn't import it for transportation).
    We have collected  lot of objects in that request.It will take lot of time for us to create back that request.
    Is there a way to copy that released local request so that we can avoid the whole process of recollection of objects in the request again
    If so,list out the steps.It saves lot of time for us.
    Thanks,
    Harika.

    Hi Harika,
    Try below steps
    1) Go to SE01
    2) Request -> Create
    3) Choose Transport of Copies
    4) Enter description
    5) Click Include Object button (Ctrl+F11)
    6) Choose Object list from request -> Enter Request Number which contains object(s) you want to copy.
    7) you will get new transport which contains all your old objects
    Regards,
    Venkatesh

  • Transport Release runtime error in BPC Netweaver 10.1

    Hi,
    We are getting the following error while releasing the transport in SAP BPC NW 10.1 Development system
    Category               ABAP Programming Error
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                CX_RSBPCR_INTERNAL_EXCEPTION
    ABAP Program           CL_RSBPCR_RES_MANAGER=========CP
    Application Component  BW-PLA-BPC-INF-WP
    Short Text
        An exception has occurred that was not caught.
    What happened?
        Exception 'CX_RSBPCR_INTERNAL_EXCEPTION' was raised, but it was not caught
         anywhere along the
        call hierarchy.
        Since exceptions represent error situations, and this error was not
        adequately responded to, ABAP program 'CL_RSBPCR_RES_MANAGER=========CP' had
         to be terminated.
    We are on SAP BW 7.40 patch level 5. Could you please advice the reason for this?

    Hello,
    so after implementing note 2050531 you should add the following entry in table UJPS_RESOURCE (caution I misspelled it earlier, it is not ups_resource).
    You can do this through transaction SE16 -> enter UJPS_RESOURCE and hit Create Entries.
    Fields MANDT and APPSET_ID should be filled with your BW System Client ID (i.e. 100) and your BPC Environment ID (i.e. ENVIRONMENTSHELL). The entries that appear to be empty should be left empty.
    MANDT
    APPSET_ID
    RESOURCE_ID
    TSTPNM
    TIMESTMP
    OBJSTAT
    CONTREL
    CONTTIMESTMP
    OWNER
    BWAPPL
    ACTIVFL
    PARENT_RES_ID
    UPDATE_COUNTER
    RESOURCE_TYPE
    CREATE_USER
    CREATE_TIME
    ORIG_LANGU
    OWNER_ID
    OWNER_TYPE
    Client ID
    Your Environment ID
    005056B236881ED38AE1D894578A8F97
    0
    ACT
    0
    3
    0
    FOLDER
    0
    E
    005056B236881ED38AE1D894578A8F97
    TEAM
    After this you should be able to release your request.
    Hope this is helpful.

  • How to apply newly transported release strategy to existing POs ?

    Hi,
    We transported a new release strategy to production
    The new POs created are catching the rel strat B if they meet criteria
    But some of the existing POs also meet the criteria for B and they should also take up this new release strategy
    We cannot change the POs in ME22N, busines refuses to make any change to POs
    How can we apply our new rel strategy to these POs ? has the SAP provided any standard function module to report?
    thank you
    B

    thankyou for the replies.
    finally we got minor price change done manually in all the POs to get the new rel strategy on them
    Open POs , no change done - Did not pick release strategy (then it was no problem at the first place)
    Open POs , change done in price - picked the new release strategy
    Open POs ,  no change done but click on 'check' button in change mode - Could not test this one bcoz all POs are now converted. But I put break point in save user exit (which also plays part in determining the new release strategy) it did not stop at the break point and I gave message 'No data changed' so I think this action will not redetermine release strategy. It was very useful if it did though.
    thank you.

  • Transports. (Copy as per transport request from one client to another)

    Iu2019ve enhanced the datasource 2lis_13_vditm with required fields in client 100. I removed hide check box for the fields and activated the datasource. Iu2019m maintaining three separate requests one for deactivation, second for activation and third for datasource modification.
    In order to reflect these changes to client 200, I run SCC1 and copied the requests from client 100 to client 200. Iu2019m wondering these changes are not reflecting into client 200. Still Datasource is inactive in client 200 and active in client 100.
    Advance thank you very much

    Hi Sharsha;
    Please run SCC1 and select "including Request Subtasks".
    Don't forget any transport request.
    Regards;
    Ricardo

  • Transport released it taking more time

    Hi Every One,
    As i want to transport the program with teir package , smartforms etc.
    I  created one transport request with transport of copies and include all package in that and released
    Its taking more time
    Status in the se01 showing request is released
    log shows
    Checks at Operating System Level         23.04.2010 12:45:48    (0) Successfully Completed
    Pre-Export Methods                       23.04.2010 12:45:54    (0) Successfully Completed
    Checks at Operating System Level         23.04.2010 12:47:23    (0) Successfully Completed
    Pre-Export Methods                       23.04.2010 12:47:27    (4) Ended with Warning
    Export                                   23.04.2010 15:28:29 Not yet executed
    RDDIMPDP program is running parallel in background.
    So what i have to check any suggestions please
    Regards
    Shashi

    Hi Niraj,
    i sheduled RDDIMPDP job for every 2 minute and it is running fine
    what i done is i created another request and transported. its went fine and issue is solved.
    but this request is still showing as before now i want to ckear this. how i can do this. shall i delete this request directly.. Any problem with this
    I am pasting Log report last few lines
    WARNING:
    sapprd\sapmnt\trans\tmp\TRPKK900160.TRP is already in use (10), I'm waiting 4 sec (20100423124802). My name: pid 3788 on sapprd (APServiceTRP)
    WARNING:
    sapprd\sapmnt\trans\tmp\TRPKK900160.TRP is already in use (20), I'm waiting 1 sec (20100423124826). My name: pid 3788 on sapprd (APServiceTRP)
    WARNING:
    sapprd\sapmnt\trans\tmp\TRPKK900160.TRP is already in use (30), I'm waiting 4 sec (20100423124850). My name: pid 3788 on sapprd (APServiceTRP)
    START INFORM SAP-SYSTEM OF TRP Q      20100423155230              BIPLAB       sapprd 20100423155222     
    START tp_getprots          TRP Q      20100423155230              BIPLAB       sapprd 20100423155222     
    STOP  tp_getprots          TRP Q      20100423155240              BIPLAB       sapprd 20100423155222     
    STOP  INFORM SAP-SYSTEM OF TRP Q      20100423155240              BIPLAB       sapprd 20100423155222  
    Regards
    Shashi

  • Abap transport release issue

    hello,
    i have a scenario where in my project, the crm development is happening. and for a single object there are about 4 people are working and there is a single transport request with 4 different tasks. Now that each folks are working individually and completing there task.. Now the developer1 completed his task and what to test it in quality but on release of the transport it started giving implication due to other TR tasks.
    Now we are unable to figure out how to resolove this activity where we can resolve this issue. also that there is yet another crm component the other 4 guys are working on..
    please let me know how to resolve this issue?
    best regards,
    kandaraj

    Hi Kandaraj,
    welcome to the club.
    We had this trouble for years. Then they started to use SAP Solution manager, everybody got training courses on how to use and we can not create transport requests or transport them without creating a minimum of 3 Solution manager processes with a dozen or so steps and workflow and partner assignment and assignment of testers, developers, process administrators with approvals, releases, and and and guess what we got?
    We have some 800% more of administrative overhead including full-time quaility managers.
    And nothing is better than it was before:
    We still face the task of unavoidable communication with people. I really hate all those developers, consultants and users.
    Why can't the system do the job?
    Have a nice weekend, live goes on.
    Clemens

  • Transport release tale long time

    Hi Experts,
    I am facing one very strange problem in our developement server. some of the transport request are taking very long time to release while some of the transport are getting released in desired time.
    I have also tried to check the content of the transport request but found that some request having only single roles is taking around 20-25 mins to get released and some transports having 30 roles can be released in 5 mins.
    Please help me to get out of this unexpected behaviour of the system.
    Thanks,
    Sonia

    Hi,
    I have faced similar kind of problem but In my case I was facing the problem with the TRs having Project defined or you can say that associated to a project.
    Please let me know if you are also have projects defined for these troubled Transport requests?
    With Regards,
    Saurabh

  • Transport Release Issue For Process Chain

    Hi Gurus,
    While trying to relase my request, which has Process Chain to be imported to testing environment i am getting a message like below:
    Check Objects before release and msg as
    key :R3TR TABU RSCOMPTLOGOT             ERSPC*(Application Component Of Process Chain)
    If i click release anyway the information i get is "You have to be an approver to bypass this check" and it is not released.
    I have checked the request and it is consistent and "ok".
    Not able to understand why i am not able to release this request.
    Please guide me on this.
    Thanks

    Hi Vijay,
    Can you check your process chain or any part of proce chain (diff process type) are not locked in two different transport request ?
    If so then delete the object from one request and add same object in another request and release.
    Regards,
    Kiran

  • Transport release error

    Hi,
        When i am trying to release a transport, I am getting the following error. I tried the first solution, but it is doing nothing. I don't understand the second solution. Could anyone help me on this as I am doing first time in my life transport management? ( i am really tired of learning sap skills, but on the other side it is really hard to get new jobs) Thanks,
    Only edit objects from package Z_RFC in local requests
    Message no. TK332
    Diagnosis
    Objects in package Z_RFC cannot be edited in transportable Workbench requests in the current system BAM. The transport routes are configured such that objects from package Z_RFC can only be edited in local Workbench requests.
    System Response
    The function terminates
    Procedure
    You have the following options:
    If you want to transport objects in package Z_RFC into the target TE2 once only, without changing the configuration of the transport routes, then create a transport of copies in the extended view of the Transport Organizer (Transaction SE01). Go to the request overview and choose Request/task -> Object list -> Include objects to include your objects in this transport of copies.
    If you would like objects in package Z_RFC to be transported generally into the target system TE2, contact your transport administrator. In this case, the configuration of the transport routes must be corrected in the Transport Management System (TMS). For details, see the documentation on the Transport Management System

    Go to SE80
    Select Package
    Type Z_RFC
    AND CHANGE THE TRANSPORT LAYER TO CORRECT SYSTEM
    Rgds
    PR

  • Transportable tablespace copy during cold backup

    Is it possible to start the copy of the transportable tablespace files while the backup is taking place? Logically it doesn't sound like there should be a conflict, but I wanted to run the idea past you guys first.

    i know that.
    process i want to use is:
    alter tablespace(s) read only.
    export transportable tablespace metadata
    start file copies
    shutdown instance
    startup mount
    perform rman
    startup database
    when copies complete, alter tablespaces read write.
    sorry i wasn't absolutely clear before. it made sense to me when i wrote it.

  • Transport Released to QAS in Error

    I mistakenly released Some oneu2019s transport u201CRD1K930971  .  I am not sure if it will have any ill effects in QAS or not.
    Hi Experts,
    Is there a way to fix that mistake?
    Thanks,Sirisha

    Hi,
    If you have not Imported this request in QAS, then there is no any problem,
    regards,
    sujeet

  • Transport Release frequency for Authorization Roles

    Hi,
    At my present customer all system changes are transported via release management. The current frequency of releases is 2 times a year. This includes SAP support packages, customizing, abap AND authorization roles.
    Now I would like to establish a different, quicker release 'speed' for authorization roles only (f.i. once a week).
    I already motivated my request with many reasons (role changes can be considered as master data changes; the lack of speed leeds to insecure 'workarounds'; role management issues are 'redesigned' to user management issues; etc.) but what I am still looking for are reference documents, best practices, audit reports in which the same advise is described.
    Could you please help me with my quest?
    Thank you!
    Kind regards,
    Lodewijk

    Hi Lodewijk,
    I agree, that is is useful to define a specific schedule for transporting roles in oposite to the schedule for updating the software, however, I do not have a document described some best practise. Anyway, the following link may help you to convince the management, that you can setup a process including 4-eyes checks on the transports:
    [TMS Quality Assurance|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/9c/a544c6c57111d2b438006094b9ea64/frameset.htm]
    Using this process you would accept transports only which cointains roles (R3TR ACGR...).
    Kind regards
    Frank

Maybe you are looking for