Transport Released to QAS in Error

I mistakenly released Some oneu2019s transport u201CRD1K930971 . I am not sure if it will have any ill effects in QAS or not.
Hi Experts,
Is there a way to fix that mistake?
Thanks,Sirisha

Hi,
If you have not Imported this request in QAS, then there is no any problem,
regards,
sujeet

Similar Messages

Transport Release Error: Not all objects in the request could be locked.

Hi all!
I hope you can help me with this one.
We need to transport a particular request in our QA and Production client. However, upon releasing of the transport request number, a warning/error message appeared on the screen:
'Not all objects in the request could be locked. Do you want to release anyway?'
I tried to display the error and below is the object messages:
Object messages: R3TR TABU ZLIFNR
Task F5DK900107 belongs to a different category
I don't know what that means, but I noticed that there are too many objects under the customizing task which I think is not part of the latest customization. I'm not sure what to do, I hope somebody could give me some advise.
Thank you very much.
Regards,
April

Hi!
There are many IMG activities under that same request which is not supposed to be transported to QAS. Is it possible to transfer the IMG activity and other customization into a new transport request? if possible, how?
I'm thinking if I can just try to change/save again the new configuration to a new transport request number. But if there's an easier way to solve this problem, I will consider that option.
=) Thank you...

Transport Release Error - Error in check before release, for details see longtext

Hi there,
I am halfway through applying some HR Patches (B0).
We have made both SPDD/SPAU changes and the HR patch has gone in DEV ok.
We have released the SPDD transport ok.
But when we try to release the SPAU transport we get the error below:
Anyone help??

Hi Andy,
Refer:
1484093 - Transport with service interfaces can't be released
This has same error message and problem stated by you.
Divyanshu

Transport failure in QAS system after support pack stack 9 upgrade

We have a DEV->QAS>PRD ECC system landscape. Recently we upgraded our DEV, QAS and PRD system to support pack stack 9 (with Kernel level 137). After the upgrade, we got transport failure in QAS where it shows pink colored down arrow which shows unable to open import queue when I click on it under stms import overview. If I put back the old kernel (Level 69), transport works just fine. DEV is the TP domain controller. When I run the RTPTEST in QAS, it show sthe follwing info:
RFC Destination
Destination CALLTP_WindowsNT
tp Path E:\usr\sap\QAS\DVEBMGS02\exe\tp.EXE
tp Executable Size: 10.352.432 bytes
RFC Ping Error when opening an RFC connection
tp Call
RFC Link Error when opening an RFC connection
tp Version
DB Connect
Offline Call Error when opening an RFC connection
I will greately appreciate any input to resolve this issue.
Thanks

You need to upgrade two component of your kernel tp and R3trans
Also perform an additonal test with new kernel
cd /usr/sap/trans/bin
tp connect <SID> pf=TP_DOMAIN_<SID_DC>.PFL
If you have issue to connect it means there is some issue with tp tool and/or connectivity
Cheers !
Manish

Transport release

Hi everybody,
I have an ocean in my mind!!! I know that it's something easy but I can´t clear it. May be you can bring light to me.
I have a Workbench transport release with many ABAP Programs. I released it for sending to QA environment. When I check the transport log I notice that some programs are in red (not all the ones that are inside the order).
My question is, I have to send back in another release all the objects or only the ones that has problems (the red ones)?
Thanks & many kind regards,
MM.

Hi MMP,
the red ones could not be imported and activated for a reason. You can try again after finding the reason and correcting the situation.
It should not be required to repeat the transport for all objects, but it won't hurt.
Regards,
Clemens

SCCM 2012 R2 - Migration TS Failed in Release Request Step with Error Code 0x80004005

Hi
I have Upgraded my lab from SCCM 2012 SP1 to SCCM 2012 R2. Now, While I am running TS for Refresh/Replace Migration, its successfully captures all the Data & settings and can also restores all Data & settings, but at release request Step TS got failed.
In SMSTS log file error was "Release Request Failed with error code 0x80004005".
Is there any KB released by Microsoft to fix this issue?? Due to this issue I am unable to run any other TS.

I've seen a few weird scenarios with task sequences after an upgrade from SP1 to R2.
In most cases I've been able to fix these "problems" by simply creating a new task sequence, and copy all the custom steps to the new task sequence.
Also make sure to update boot images, mdt packages, usmt etc. to new versions.
So thats what I'd try first....
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Release Management Update 4-Errors while loading releases in Release Managment Client Interface.

Hi Team,
We are using Release Management from last 8 months and we upgraded to Release Management Update 4 and using it from last 4 months. Currently we are creating around 50-60 releases daily, but we are facing below issues from last few days with
Releases tab and no issues with other tabs (Administration, Inventory, Configure Paths and Configure Apps)
Release Management Client interface is taking long time when we are opening it.
Throwing error when we are clicking on Releases link in Releases tab.
Throwing error when we are creating new releases.
Please find the error log below:
Timestamp: 3/27/2015 6:49:44 PM
Message: Error thrown while executing the stored procedure ReleaseV2_List with parameters , @FilterXml:<Filter StatusId="0" DateStatusId="1" ApplicationVersionId="0" StageId="0" IsDeferred="0" UserId="9002"
/>, @PartitionId:1.
Timestamp: 3/27/2015 6:49:44 PM
Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.: \r\n\r\n at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
 at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
 at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
 at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
 at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
 at System.Data.SqlClient.SqlDataReader.get_MetaData()
 at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
 at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
 at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
 at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
 at System.Data.SqlClient.SqlCommand.ExecuteXmlReader()
 at Microsoft.TeamFoundation.Release.Sql.OnPrem.OnPremDbAccessor.ExecuteXmlStoredProcedure(String storedProcedureName, Hashtable xmlParameters, String rootElementName, Boolean addRequestorParameter)
Timestamp: 3/27/2015 6:49:44 PM
Message: The wait operation timed out: \r\n\r\n
Timestamp: 3/27/2015 6:49:44 PM
Message: Exception has been thrown by the target of an invocation.: \r\n\r\n at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean&
bNeedSecurityCheck)
 at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
 at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
 at System.Activator.CreateInstance[T]()
 at Microsoft.VisualStudio.Release.ViewModel.ViewModels.WorkspaceTabViewModel`1.get_DefaultViewModel()
Timestamp: 3/27/2015 6:49:44 PM
Message: The remote server returned an error: (500) Internal Server Error.: \r\n\r\n at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
 at Microsoft.TeamFoundation.Release.Data.WebRequest.PlatformHttpClient.EndGetResponse(IAsyncResult asyncResult)
 at Microsoft.TeamFoundation.Release.Data.WebRequest.RestClientResponseRetriever.EndGetAsyncMemoryStreamFromResponse(IAsyncResult asyncResult, IPlatformHttpClient platformHttpClient)
 at Microsoft.TeamFoundation.Release.Data.WebRequest.RestClientResponseRetriever.EndDownloadString(IAsyncResult asyncResult, IPlatformHttpClient platformHttpClient)
 at Microsoft.TeamFoundation.Release.Data.WebRequest.RestClient.EndPost(IAsyncResult asyncResult)
 at Microsoft.TeamFoundation.Release.Data.Proxy.RestProxy.HttpRequestor.<>c__DisplayClass1.<GetPostCaller>b__0(String url, String body)
 at Microsoft.TeamFoundation.Release.Data.Proxy.RestProxy.BaseReleaseV2ServiceProxy.ListReleases(String filterXml)
 at Microsoft.TeamFoundation.Release.Data.Model.ReleaseV2.LoadListXml(String filterXml)
 at Microsoft.TeamFoundation.Release.Data.Model.ModelFactory.LoadListElements[T](String filterXml)
 at Microsoft.VisualStudio.Release.ViewModel.ViewModels.ReleasesViewModel.LoadElements(String filterXml)
 at Microsoft.VisualStudio.Release.ViewModel.DataAccess.ElementRepository.LoadElements(String filterXml)
 at Microsoft.VisualStudio.Release.ViewModel.ViewModels.ListWorkspaceViewModel.Initialize()
 at Microsoft.VisualStudio.Release.ViewModel.ViewModels.ReleasesViewModel..ctor()
Timestamp: 3/27/2015 6:49:44 PM
Message: The remote server returned an error: (500) Internal Server Error.: \r\n\r\n at Microsoft.TeamFoundation.Release.Common.Presentation.Binding.OnDatabindingException(Object bindingExpression, Exception exception)
 at System.Windows.Data.Binding.DoFilterException(Object bindExpr, Exception exception)
 at System.Windows.Data.BindingExpression.CallDoFilterException(Exception ex)
 at System.Windows.Data.BindingExpression.ProcessException(Exception ex, Boolean validate)
 at System.Windows.Data.BindingExpression.UpdateSource(Object value)
 at System.Windows.Data.BindingExpressionBase.UpdateValue()
 at System.Windows.Data.BindingExpression.UpdateOverride()
 at System.Windows.Data.BindingExpressionBase.Update()
 at System.Windows.Data.BindingExpressionBase.ProcessDirty()
 at System.Windows.Data.BindingExpressionBase.Dirty()
 at System.Windows.Data.BindingExpressionBase.SetValue(DependencyObject d, DependencyProperty dp, Object value)
 at System.Windows.DependencyObject.SetValueCommon(DependencyProperty dp, Object value, PropertyMetadata metadata, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue, OperationType operationType, Boolean isInternal)
 at System.Windows.DependencyObject.SetCurrentValueInternal(DependencyProperty dp, Object value)
 at System.Windows.Controls.Primitives.Selector.UpdatePublicSelectionProperties()
 at System.Windows.Controls.Primitives.Selector.SelectionChanger.End()
 at System.Windows.Controls.Primitives.Selector.SetSelectedHelper(Object item, FrameworkElement UI, Boolean selected)
 at System.Windows.Controls.Primitives.Selector.NotifyIsSelectedChanged(FrameworkElement container, Boolean selected, RoutedEventArgs e)
 at System.Windows.Controls.Primitives.Selector.OnSelected(Object sender, RoutedEventArgs e)
 at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
 at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
 at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
 at System.Windows.UIElement.RaiseEvent(RoutedEventArgs e)
 at System.Windows.Controls.TabItem.OnSelected(RoutedEventArgs e)
 at System.Windows.Controls.TabItem.OnIsSelectedChanged(DependencyObject d, DependencyPropertyChangedEventArgs e)
 at System.Windows.DependencyObject.OnPropertyChanged(DependencyPropertyChangedEventArgs e)
 at System.Windows.FrameworkElement.OnPropertyChanged(DependencyPropertyChangedEventArgs e)
 at System.Windows.DependencyObject.NotifyPropertyChange(DependencyPropertyChangedEventArgs args)
 at System.Windows.DependencyObject.UpdateEffectiveValue(EntryIndex entryIndex, DependencyProperty dp, PropertyMetadata metadata, EffectiveValueEntry oldEntry, EffectiveValueEntry& newEntry, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue,
OperationType operationType)
 at System.Windows.DependencyObject.SetValueCommon(DependencyProperty dp, Object value, PropertyMetadata metadata, Boolean coerceWithDeferredReference, Boolean coerceWithCurrentValue, OperationType operationType, Boolean isInternal)
 at System.Windows.DependencyObject.SetCurrentValueInternal(DependencyProperty dp, Object value)
 at System.Windows.Controls.TabItem.OnPreviewGotKeyboardFocus(KeyboardFocusChangedEventArgs e)
 at System.Windows.UIElement.OnPreviewGotKeyboardFocusThunk(Object sender, KeyboardFocusChangedEventArgs e)
 at System.Windows.Input.KeyboardFocusChangedEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
 at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
 at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
 at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
 at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
 at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
 at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
 at System.Windows.Input.InputManager.ProcessStagingArea()
 at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
 at System.Windows.Input.KeyboardDevice.TryChangeFocus(DependencyObject newFocus, IKeyboardInputProvider keyboardInputProvider, Boolean askOld, Boolean askNew, Boolean forceToNullIfFailed)
 at System.Windows.Input.KeyboardDevice.Focus(DependencyObject focus, Boolean askOld, Boolean askNew, Boolean forceToNullIfFailed)
 at System.Windows.Input.KeyboardDevice.Focus(IInputElement element)
 at System.Windows.UIElement.Focus()
 at System.Windows.Controls.TabItem.SetFocus()
 at System.Windows.Controls.TabItem.OnMouseLeftButtonDown(MouseButtonEventArgs e)
 at System.Windows.UIElement.OnMouseLeftButtonDownThunk(Object sender, MouseButtonEventArgs e)
 at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
 at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
 at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
 at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
 at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
 at System.Windows.UIElement.OnMouseDownThunk(Object sender, MouseButtonEventArgs e)
 at System.Windows.Input.MouseButtonEventArgs.InvokeEventHandler(Delegate genericHandler, Object genericTarget)
 at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
 at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
 at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
 at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
 at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
 at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
 at System.Windows.Input.InputManager.ProcessStagingArea()
 at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
 at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
 at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
 at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
 at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
 at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
 at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
 at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
 at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
Please help us.
Thanks & Regards,
Ramakrushna Parupalli

Hi Ramakrushna,
For the situation, you can connect to the database of Release Management, and check whether you can execute stored procedure ReleaseV2_List manually.
You can also try to clean some of releases records if possible to check if the timeout issue can be resolved. Or you can set the timeout configuration of Release Management to a larger value. Refer to this
thread for more information.
Another option is check event logs to see if there any useful informaiton, and repair Release Management on your server machine if possible. If the problem still exist after taking the methods I mentioned above, please elaborate more details about your scenario.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Transport Release runtime error in BPC Netweaver 10.1

Hi,
We are getting the following error while releasing the transport in SAP BPC NW 10.1 Development system
Category               ABAP Programming Error
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_RSBPCR_INTERNAL_EXCEPTION
ABAP Program           CL_RSBPCR_RES_MANAGER=========CP
Application Component BW-PLA-BPC-INF-WP
Short Text
    An exception has occurred that was not caught.
What happened?
    Exception 'CX_RSBPCR_INTERNAL_EXCEPTION' was raised, but it was not caught
     anywhere along the
    call hierarchy.
    Since exceptions represent error situations, and this error was not
    adequately responded to, ABAP program 'CL_RSBPCR_RES_MANAGER=========CP' had
     to be terminated.
We are on SAP BW 7.40 patch level 5. Could you please advice the reason for this?

Hello,
so after implementing note 2050531 you should add the following entry in table UJPS_RESOURCE (caution I misspelled it earlier, it is not ups_resource).
You can do this through transaction SE16 -> enter UJPS_RESOURCE and hit Create Entries.
Fields MANDT and APPSET_ID should be filled with your BW System Client ID (i.e. 100) and your BPC Environment ID (i.e. ENVIRONMENTSHELL). The entries that appear to be empty should be left empty.
MANDT
APPSET_ID
RESOURCE_ID
TSTPNM
TIMESTMP
OBJSTAT
CONTREL
CONTTIMESTMP
OWNER
BWAPPL
ACTIVFL
PARENT_RES_ID
UPDATE_COUNTER
RESOURCE_TYPE
CREATE_USER
CREATE_TIME
ORIG_LANGU
OWNER_ID
OWNER_TYPE
Client ID
Your Environment ID
005056B236881ED38AE1D894578A8F97
0
ACT
0
3
0
FOLDER
0
E
005056B236881ED38AE1D894578A8F97
TEAM
After this you should be able to release your request.
Hope this is helpful.

Transport release error

Hi,
When i am trying to release a transport, I am getting the following error. I tried the first solution, but it is doing nothing. I don't understand the second solution. Could anyone help me on this as I am doing first time in my life transport management? ( i am really tired of learning sap skills, but on the other side it is really hard to get new jobs) Thanks,
Only edit objects from package Z_RFC in local requests
Message no. TK332
Diagnosis
Objects in package Z_RFC cannot be edited in transportable Workbench requests in the current system BAM. The transport routes are configured such that objects from package Z_RFC can only be edited in local Workbench requests.
System Response
The function terminates
Procedure
You have the following options:
If you want to transport objects in package Z_RFC into the target TE2 once only, without changing the configuration of the transport routes, then create a transport of copies in the extended view of the Transport Organizer (Transaction SE01). Go to the request overview and choose Request/task -> Object list -> Include objects to include your objects in this transport of copies.
If you would like objects in package Z_RFC to be transported generally into the target system TE2, contact your transport administrator. In this case, the configuration of the transport routes must be corrected in the Transport Management System (TMS). For details, see the documentation on the Transport Management System

Go to SE80
Select Package
Type Z_RFC
AND CHANGE THE TRANSPORT LAYER TO CORRECT SYSTEM
Rgds
PR

Error in Releasing Contracts in SRM-Error Log for user WF-BATCH

Hi,
When we are releasing contracts in SRM, an error log is being generated for a user WF-BATCH with message :
"Recipient not found
The error ocurred by processing event RELEASED_NEWLY with GUID 4530EA86C23B007700000000B0000023 and object_id= 4400000238"(Where 4400000238 is our contract no)
Also our contract is not being transported to CCM even though all the relevant configurations have been done in XI.
Is this because of the error log?? What is the issue??
Any Useful answers would be suitably rewarded..
Regards,
Puneet

Hello Puneet,
Please check whether u have released that contract or not.
if u need to release purchase order from the contract, it needs to be released first.
from ur problme statement, it seems u haven't released that contract.
Sarabjeet

Transport RELEASE copy ?

EXPERT!
One of our Functional Consultant who wrongly release the transport as local transport, Is it possible to make the copy of release transport or re-transport of release transport to QAS, which should be transport to Quality ?
Regards
Anwer Waseem
SAP BASIS

Mate,
Create a request (cust / WB) in se09 or se10 specifying the correct traget then select your new tp and click on include button which you can see on the tool bar. once u click it will give u option to select so select the TP request option and then enter the tp number which was released in local and save it. All the content of that request will come and settle in new request. Release the task and request and then check in QAS.
If solved award points.
Cheers
Arun

While releasing a PO an error showing PO cannot be released

While checking the PO release an error showing PO cannot be released is showing.The release button is not appearing from the first code itself

Hi,
The following are the various reasons for the errormessgae.
1. PO would have already released.
2. PO would not have come under the perview of release u defined
3.You would not have authorization for release M_EINK_FRG object.
4.The charetarestcs defined will not come for this PO properties.
ETc.
Mostly , if all the config is setand done and working fine for other POs tooo then this PO iswith the problem.
Do you have this problem for other POs too with the same kind of PO?
Regards,

How to undo an order of transport which has returned an error code 8

Hi experts,
While transporting an installation of business content, it has removed a lot of transfert rules. Could you tell me how to undo this transport from quality to the production envirenenmet. Unfortunately I dident check the transport order which has returned the code error 8.
Thank you for your answer.
Regards.

Hi Joseph,
Transport all the objects you want in the order again with a new request. This will replace all the transported objects and you will get all the objects transported.
Regards,
KK.

Transport in Bi 7.0 Error in Transformation .

Hi All,
While Tranportainig Transformation in BI7.0 I am getting following error
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Delete Mode)
Deletion of Objects with Type Transformation
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for RSFO LRS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)Post-import method RS_AFTER_IMPORT completed for RSFO L, date and time: 20070911143025
Post-import methods of change/transport request RBDK900395 completed
Start of subsequent processing ... 20070911143024
End of subsequent processing... 20070911143025
Execute reports for change/transport request: RBDK900395
Reports for change/transport request RBDK900395 have been executed
Start of................ 20070911143025
End of.................. 20070911143025
Execution of programs after import (XPRA)
End date and time : 20070911143025
Ended with return code: ===> 8 <===
Please guide me how to solve this issue..
Regards
sathish

Hi Satish,
You want to transport transformations. This transformation can be between datasrc and the infocube or any such 2 objects.
The target system where you want to transport this should have these 2 objects. They must be active in the target system.
If not then the request which you will transport should also have these 2 activated objects along with the transformation.
hope it helps...

Release of Cost estimate error

Hi,
I am creating a material cost estimate by CK11n.
Then doing Marking of the cost estimate in CK24.
But, while releasing it gives errors like present period is too early.
I have checked the current period in MM03.
Ususally this problem starts during last week of the month.After 17th or 18th of the month the costs do not get released, accounting documents of billing docs of SD doesn't get generated. It asks for waiting till opening of next period.
Why this kind of error happens? An elaborate explanation will be greatly appreciated.
Thanks,
Prithwiraj.

While executing CK11n, please ensure that, start date as today's date. You will not find any error in CK24 if the CK11n start date is current date.
Please make sure that, you are in current period.
Please award if my answer works fine.
Vijayanand Sankaran

Transport Released to QAS in Error

Similar Messages

Maybe you are looking for