Transport Request and Process Chain - Together?

Hi,
Is it safe to transport a request while a process chain is being run?
Need your expert advice. Thanks!

Hi Winnie,
It should not affect the transport. Still a question, Does the transport request contain anything from the process chain?. If you could wait for sometime then do it after the process chain run is completed. Though I think unless you change anything in the Process chain like infopackage selection, etc. the transport should go through.
Bye
Dinesh

Similar Messages

  • Transport error in process chain

    Hi to all,
        Could someone help me out on my problem? I changed process chain in and request for transport. but am getting errors when I transported them.
    Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
    Version 'M' of chain ZOA_PC12A_TR_SRV_REP was saved without checking      
    Error in remote call of destination P23BW 
    Chain ZOA_PC12A_TR_SRV_REP Was Activated And Scheduled  
    Version 'M' of chain ZOA_PC12B_TR_SRV_REP was saved without checking      
    Error in remote call of destination P23BW 
    Chain ZOA_PC12B_TR_SRV_REP Was Activated And Scheduled  
    Version 'M' of chain ZOA_PC12_TR_SRV_REP was saved without checking     
    Error in remote call of destination P23BW 
    Chain ZOA_PC12_TR_SRV_REP Was Activated And Scheduled  
    Version 'M' of chain ZOA_PC3C_D_ATTR was saved without checking   
    Error in remote call of destination P23BW Chain ZOA_PC3C_D_ATTR Was Activated And Scheduled 
    Version 'M' of chain ZOA_PC5_M_ATTR was saved without checking   
    Error in remote call of destination P23BW Chain ZOA_PC5_M_ATTR Was Activated And Scheduled 
    Version 'M' of chain ZOA_PC92_INIT_TXN was saved without checking   
    Error in remote call of destination P23BW 
    Chain ZOA_PC92_INIT_TXN Was Activated And Scheduled 
    Can someone tell me what am i going to do next? thanks
    Regards,
    jasper

    Hello again,
    My problem is resolved.  I am in SP17 and I applied a few SP18 notes:
    0001002791
    0001077030
    0001139653
    0001147587
    0001147766
    I then re-transport the request with the DTP and process chain.  The expected result is the dtp in the process chain should be pointing to the new dtp.  CHeers.
    HWS
    Edited by: Ho Wei Siong on Aug 14, 2008 3:35 PM

  • Differences Between Infopackage Groups and Process chains

    Hi All,
    Can anybody explain me what are the differences between Infopackage Groups and Process Chains ? And how process chains are more comfortable

    hi nagarjuna,
    An InfoPackage group is a collection of InfoPackages. In order to summarize data requests which logically belong together from a business point of view, and to therefore simplify the request, you can collect data requests (meaning the InfoPackages) into an InfoPackage Group. You can schedule each of these groups in the scheduler . With the data request the scheduler can access InfoPackage groups directly and thereby request more than one InfoPackage at a time, corresponding to the setting in the InfoPackage group. Thus, you can support InfoPackage groups with the serialization of your data requests.
    While a process chain is a sequence of processes that wait in the background for an event. Some of these processes trigger a separate event that can start other processes in turn. hit this link to know abt PCs:
    http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
    Process chains are more comfortable becoz itz not like infopackages where we have to schedule each pack individually. And in PCs, monitoring is very convenient since u see evrything in a single page.
    regards
    sham'm

  • Incorrect data after activating the request through Process chain.

    Dear SDN chaps.
    Today morning. I encountered a strange issue in DSO..
    I have DSO which is updating from the AL11(application server) flat file.
    While i am loading it to PSA there were no issues and after loading it to the DSO there is no issue and its passing through the routine and the data is populating properly in NEW data Table .But after successful activation of  the request through process i am getting the wrong records in active data table.
    Then i deleted the request and reran it manually i mean triggered the DTP and ran the manual activation surprisingly accurate records are coming through manual process..
    I am just wondering why it is not working through process chain and why it is showing incorrect records through process chain execution and how it is showing accurate records through manual uploading process..'
    Could some one please help to come out from this..By the way mine is SAP BI 7 SP20 &SP05 for BW 7.01
    Thanks
    K M R
      

    Hi Pra
    Thanks for your response..
    We are doing PSA deletion and then we are uploading the data to PSA as well as DSO.
    Now the issue is not in the part of loading we are facing the issue in Actiation of request if i am executing the activation through process chain it is sucess but the values are incorrect. If i am doing the manual activation it sucess with correct data.
    Even i tried with a new chain but still i am facing the issue.
    Surprise thing is in new data table the data is perfect in both the ways like manual upate and Process chain update only during activation i am getting incorrect record in the active data table..
    Appreciate your help on this....
    Thanks
    K M R
    Edited by: K M R on Jul 9, 2010 11:09 AM

  • How to configure Integration B2B to request and process AS2 Sync MDN

    Hi,
    Is it possible to configure B2B to request and process sync MDN in Custom Document Over Internet scenario?
    I have set up the TP Delivery Channel's Acknowledgement mode to Sync but It does not work for outgoing documents. Our trading partner sends back MDN over the same https connection but it only results in an error. The business message status of is Wait Ack for few minutes and then changes to Error:
    Business Message Details
    Collaboration          
    Revision          
    Business Action          PROCESS
    Revision          1
    Process Protocol          
    Exchange Protocol          AS2 - 1.1
    B2B Message Id          1036
    Protocol Message Id          <1036@as2test>
    Protocol Collaboration Id          
    Receive Time Stamp          April 21, 2009 2:37:43 PM
    Send Time Stamp          April 21, 2009 2:37:43 PM
    Acknowledge Mode          Sync
    Reply Mode          Async
    Agreement          TP_TEST_AGR
    Message Date Time          April 21, 2009 2:37:43 PM
    Error Code          AIP-50079
    Message Type          
    State          Error
    Remaining Retry          0
    Acknowledge Type          Document Exchange
    Direction          Outbound
    Time To Acknowledge          
    Sending Trading Partner          HOST_TEST
    Wire Message          View
    Correlated Message          
    Payload          Payload
    Transport error: [IPT_HttpSendError] HTTP encounters send error :.
    Premature EOF encountered
    Also our trading partner reports that he gets the message six times during the time between Wait Ack and Error status and each time send Ack. Nothing is visible in b2b.log in that time.
    When we switch to Async Ack, B2B also sends message six times and each time receives Async MDN. This time however, each MDN is received and processed correctly. Our request has status Complete, until the 6th Ack is received, then it changes to the same error as above.
    Have any of you experienced above error? Is it at all possible to process AS2 MDN's correctly especially in Sync mode?
    Thank you in advance.

    Just consider your BPM is receiver, and sender:
    Src --> BPM  (BPM is Receiver)
    ==========
    Sender Agreement (If it is IDOC or HTTP, then you do not have to create)
    Commnunication Channel
    Receiver Determination
    Interface Determination    
    BPM --> Target (BPM is sender)
    ============
    Receiver Determination
    Interface Determination    
    Communication Channel
    Receiver Agreement
    If your BPM interact with other systems, you will have more Receiver Determination and Interface determination, possible Receiver agreement
    Hope this clear your doubts
    Liang

  • Triggering Process chain based on execution of R3 job and Process Chain

    Hi All,
    I need your help in arriving at a solution for a reqirement.
    Scenario is., I need to trigger a process chain B based on successful execution of Process chain A and an R3 job. If both conditions(Completion of R3 job and Process Chain A) are met then only it has to trigger process Chain B.
    I know that we can use events to trigger a process chain using R3 job.But my case is differenet I need to consider the success message from both process chain and R3 job.Is there any way to solve it ?
    Please provide me with your valuable inputs.
    Thanks,
    Bindu

    Hi Hima,
    You can use the  'AND' variant for both, If both are success then trigger the process chain.
    Regards,
    Ravi Kanth
    Edited by: Ravi kanth on Apr 30, 2009 3:36 PM

  • Back ground processes, dialogue processes and Process chains

    Hai all,
               I am going through making process chains and I am struck with one thing:
    "How many background process chains and dialogue processes you have during run time"
    This is the problem. I understood everything else except this.The concept says that I have to know what is the capacity of the system, how many background and dialogue processes it could accomodate, how many are left and how many you can use for your process chain.How do we find out this? and could somebody please explain me or refer to documentation about the Back ground processes, dialogue processes and Process chains.
    Thanks.

    Hi Visu,
      You can see the number of dialog and background processes by using transaction SM51 and then double clicking on the server (we only have one but it may be different for each). Our BASIS folks take care of the number of processes as well. And, for us we have a schedule that changes the number at a certain time of day because you tend to need more dialog during the day but more batch at night.
      The transaction to look at and change the settings is RZ03. Then use the menu path Edit->Operation Modes you can select either Configuration or Timetable here. Both give information in different ways. I tend to double click around to see what it might tell me.
      I hope this helps a bit,
    Diane

  • How could we delete transport request and task(the released one)

    Hello
    We have a released transport task(not request). Transport request is not released.
    How could we delete transport request and task(the released one). Namely we would not like to transport it to production

    Hi, never delete directly in table.
    There are more tables which depends each other...
    Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
    Using program: RDDIT076 and changing status.

  • What are the practical differences betweens infopackages and process chains

    Hi,
    what are the practical differences betweens infopackages and process chains.
    Thanks,
    cheta.

    Hello BW,
    Hope the following links will give u a clear idea about process chains
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
    Business Intelligence Old Forum (Read Only Archive)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
    regards,
    Muralidhar Prasad.C

  • Authorizations and Process Chains

    Hi All,
    Can any one help me in learning Authorizations and Process Chains. Could you please send me some real time documents on the following.
    1. How would we get the requirements from the client to create Authorizations? What info will they give us basically to create them?
    2. The same with Process Chains.
    Could someone plese send me the requirements documents(on authorizations and process chains) they get from the client to know it from a real time perspective.
    My email ID: <b>[email protected]</b>
    Many thanx in Advance...
    Best Regards,
    Nimma.

    Hi A.M.S,
    Thanx for ur reply.
    However, I am looking for some real time specifications which we get from client just to know how the requirements will come to us and then the steps to be followed and so on...
    I would be grateful if you could send me some of them.
    Best Regards,
    Nimma.

  • Process on Help request and Process on value request events examples

    HI All,
               Can anybody please give me some examples of Process on Help request and Process on value request events.
    Thanks in advance

    HI,
    Check programs
    <b>demo_selection_screen_f1</b>.
    <b>demo_selection_screen_f4.</b>
    Regards,
    Sesh

  • Regarding Transport Request and related program names

    Hi All,
    I have a issue with picking Pro<b>gram Names</b> from <b>Transport Request</b> names.
    I am using <b>E071</b> table to pick up all the <b>Objects/Program Names</b> based on <b>TR's</b>.
    But for the <b>TR's</b> which are having <b>D-Modifiable status</b> i am not getting any entries from <b>E071</b> table.
    Can anybody give me alternate table which will give us All Program names under a T<b>R</b> based on T<b>R</b> for which status is <b>D</b>.
    Thanks in advance.
    Thanks,
    Deep.

    Hi Deep,
    When the transport request is not released (i.e it is in Modifiable status) all the objects are linked to the tasks under the transport request. So if you are trying to get all the objects in the transport request(in modifiable status), first you have to get all the tasks under the transport request and get the objects under each task from E071 table.
    You can get the taskes under the transport request by selecting from E070 table
    select * from E070 where STRKORR = <your transport request numer>
    then you can get all the objects for each task .
    - Kalyan

  • Transport Request and Cross-Application techniques

    Respected Members,
    I want to know what is the difference between the transporting request and Cross-Application Technique( eg  ALE)
    Generally suppose you have made some object in development server and then a transport request will be created and through transporting to the production server same data can be transported to production server.
    Same thing we do with ALE also that we can transport the data from one server to another server or from one client to another client.
    THen what will be the difference between the transport objects and Cross-Application techniques.
    Clear this picture by giving your valuable answers.
    Thanks a Lot.
    Manish

    Hi Manish,
    The applications transferred through Transport Requests and the data passed through ALE or EDI are completely different technologies.
    The Transport requests transfer the programs and the configurations that you do within the development Server or rather the SAP system to the Production Server and then you execute them to get the desired result.
    On the other hand,ALE(Application Linking and Enabling) or EDI(Electronic Data Transfer) transfers the data or rather business documents(for example vendor payments or making the payme nt through cheques) from one system to another system,i.e different Landscapes.
    If suppose you want to transfer the data from one SAP system to another SAP system which are in completely different landscapes,then you use ALE and in case you transfer it from one SAP system to another Non-SAP system or vice-versa,you use EDI.
    Moreover,you cannot view the coding or the configuration part in case of ALE or EDI whereas you can view the same in terms of Transport requests.
    The landscape means all the clients within one SAP system.
    I hope I have made it In case you have any further clarifications,do let me know.
    Regards,
    Puneet Jhari.clear.

  • What's the difference between transport request and change request

    Hi, I am reading TMS part of TADM12-1 now, and confused about two terms mentioned in this book, transport request and change request.
    Is there any difference with them? Please advise. Thanks
    James

    In the context of course tadm12 transport request = change request

  • Error while Transporting changes in Process chain

    Hi All,
    I have added a Hierarchy InfoPackage in Process chain and added this InfoObject in Save hierarchy and Attribute change Run Process types.
    My transport Request is showing only three entries each for
    save hierarchy , attribute change run and one for Process Chain.
    Now when I transport this changes to Process chain to Acceptance its showing Error message in Acceptance as
    Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:   
    Process variant LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 does not exist in version A       
    Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:   
    InfoPackage   no longer exists in object version A in table RSLDPIO                      
    Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:   
    Variant 'ZPAK_4AY55YMC1H454OQWJUBNJCYE9' of process type 'LOADING' not found in A version
      Errors occurred during post-handling RS_AFTER_IMPORT for RSPC L  
    The errors affect the following components:                      
       BW-WHM (Warehouse Management)    
    My question is , Why the Transport request is not transporting  the InfoPackage.
    Is there any solution for this?????
    Thanks in Advance
    Best Regards
    Pratap Sone

    Hi Pratap,
           The infopackage has not yet been assigned to a package in all probabilty. Change the package and then transport the IP and then transpost the process chain request.
    Regards.
    Edited by: Ansel D'Souza on Sep 8, 2008 7:31 AM

Maybe you are looking for