Transport request coming at the time of creating doc type

Dear all;
Here is a serious problem ,I am currently working in development server ,I was trying to create a new purchase order document type from Standard PO document type .after copid the NB i have done the required change ,but at the time of saving no transport request is cominmg it is direcly saving by the system.I have checked in IDES there it is coming fine.Whatmay be the problem?It is serious problem ,because I canot check in sand box due to I am unable to **** it to Sandbox .Please suggest.
Thanking you;
Joydeep Mukherjee

Hi,
Use T.code:SCC4, check whether development client setting done for not generating transport request!
Here,select your development client and double click; system will take to new screen
Now check u201Cchanges and transport for client specificsu201D Tab and select u201Cautomatic recording of changesu201D and save.
Better consult your Basis Consultant for above.
Regardsm
Biju K

Similar Messages

Error is coming at the time of Installation of SAP Netweaver 04's sp7

Hi All,
An Error is coming at the time of Installation of SAP Netweaver 04's sp7
Error: Unable to create an account for <SystemName> for <SAP Service sid>
can anyone suggest me regarding this.
Regards
Phanikumar

Hi
Thanks for ur suggestion,
I got the solution to this error.
The main reason is at the time of Intsalling Netweaver on windows 2003 server with Administrator rights, as per the Installtion manual we have to follow the windows password policy must and should and give the same for the Master Password while installing, then we won't get error.
Thanks & Regards
phanikumar

Error in price at the time of creating SHC fro catalogue item

Hi
Cann anyone help me with the following problem.
Error in price at the time of creating SHC fro catalogue item
mentioned below article no. 0452202 then a pallet is to cost 3275,05 (you can only order min. 10 pallets).
The system multiplies up the price by 10 & 10 and at that moment I transfer the shopping trolley it multiplies up again.
The price for 10 pallets was gladly to be 32720,50 - Buttttttttttttt it turns into 3.272.050.
Please help me in providing a solution for this
Best Regards.
sairam.

Hi
Please go through this ->
Note 739562 Simplified pricing: Price 0.00 if catalog item.
This is the standard system response as of EBP 3.5 Support Package 05 or Note 569275.
This also depends on how you uploaded the price in the catalogs ->
For price details you should use the following characteristics:-
/ccm/price[1]#/ccm/amount /ccm/price[1]#/ccm/currency_code
Perhaps you have to maintain field pricechangeable in BADi-InterfaceIF_EX_BBP_CATALOG_TRANSFER in method - ENRICH_ITEM_DATA. This will make sure you can edit the price_
Other useful pointers ->
Re: Price determination
Re: free item shopping from catalogue....product with zero price
OSS note 550071 - price for catalog product
How to Upload Price details for a catalog in CCM 2.0
Do let me know.
Regards
- Atul

IO assigned with Asset,but not coming at the time of PO creation

Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1     Depreciation - IFRS (INR)              1     0L
15     Income Tax Act                             0
20     Depreciation - Indian GAAP (INR)     3     1L
30     Depreciation - IFRS (USD)              0
31     Depreciation - Indian GAAP (USD)       0
In ACSET-Account assignment:
for dep area-20
CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regards

Hey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
     Message no. AA565
Diagnosis
     The asset to be posted does not manage parallel depreciation area 31, or
     transaction type that you are using is limited to certain depreciation
     areas, and does not contain depreciation area 31. This is incorrect.
System Response
     Posting is rejected.
Procedure
     Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards

Automatic Creation of primary key at the time of creating entries

Hi All,
I have a requirement to generate the primary key automatically at the time of creating entries. I have managed to do so by writing an event code for the maintainance object in SE54.
However called only when I create entries throught the Maintainance View.
It does not get called when I write an insert statement in the program.
Please suggest a way to achieve this.
Thanks in advance,
Archana.

for assigning the primary key while using insert statement, write a piece of code to get the last pk value, increment it by 1 and then assign this value to the pk field of the next record while inserting. if you are using a fn mod to insert values, just have this piece of code right before the insert query. a better way would be to use a GUID which will be unique globally. there is a fn mod GUID_CREATE which you can use to generate GUID. i don't think there is a way to automate this while making entries using se11, unless you change the code that actually creates the entry in the database.

How to track the transport request number for the Role/Composit Role

Hi,
How to track the transport request number for the Role/Composit Role.
Thanks,
Ravi

Use transaction SE03 Transport Organizer Tools
Execute "Search for Objects in Requests/Tasks" with objects of types:
R3TR ACGR Role
R3TR ACGT Role - User assignment
Regards

How could we delete transport request and task(the released one)

Hello
We have a released transport task(not request). Transport request is not released.
How could we delete transport request and task(the released one). Namely we would not like to transport it to production

Hi, never delete directly in table.
There are more tables which depends each other...
Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
Using program: RDDIT076 and changing status.

Missed one letter at the time of creating account for icloud. how do i fix or create another email account?

Missed one letter at the time of creating account for icloud. how do i fix or create another email account?

Hi jtv123,
Could you please tell us exactly what happens when you try to set up your account?
With kind regards,
David

Create document numbers of POs at the time of creating

Hi gurus,
has anybody experience with creating the document numbers of purchase orders when the POs are creating??
I can change the purchase order number when the PO is saving or booking but at the time of creating?
I tried the extensions:
M06B0003 Number range and document number
M06B0004 Number range and document number
MM06E003 Number range and document number
, but they doesnt work.
Thanks for your help.
_janosch

hi,
This can be done by creating output type.
In that output type you have to declare a program or subroutine name.
Whenever you create a PO that output type will trigger,so the program also trigger.
In that program you have to write code for creating document number.
If its triggered PO document will be created.
Thanks,
vijay

Alternative BOM picking at the time of creating sales order.

Dear All,
I have on requirment and it is as follows.
I have 3 alternative BOMS for one material in same plant.Now sales order is created for this materila which alternatibe BOM will system pick.
If there any possibility to customise alternative BOM picking at the time of creating sales order.Please let me know what settings do I need to configure for this.
Thanks for your support and time.
With Rgds,
Babu

hi,
this is to inform you that,
1. since you have 3 alternative BOM's. so by default system will pick up that BOM which is first according to hirearchy level at the plant level.
alternatively if the same material is going to be used for different purpose (PRODUCTION OR PLANNING), SECOND ALTRENATIVE bom will be picked.
2. you will have to assign the BOM which you want to pick add it to the picking list (ASSEMBLY OF THE PRODUCTS/COMPONENTS).
in CO27 - maintain the range of components at component level with plant as same for which you have already created a BOM.
create a sales order according - that alternative BOM will be directly assigned to the sales order.
please check and confirm.
balajia

Transport request no for the abap object

Hi experts,
                  I want to know the transport request numbers for the abap objects. Can anybody tell me the procedure of how to know the transport request number?
My approach : I want the transport request number for the function module.Open the functional module. go to Object Directory Entry and click on Lock Overview.
it is displaying the 1.Request   2.User   3.Task/request   4.Object.      What is the main difference between Request and Task/request.
For some programs it is not displaying the request number. Instead it is displaying the request locks.
Thanks and regards.
Murali Krishna T

Hi tajuddin,
                     Thanks for your prompt reply. Problem solved.
Also please make me clear --- In object directory entry ---> lock overview, I want to know the difference between the Request and Task/request.

How to create a deletion transport request without deleting the object.

Hi Experts,
I got a very strange requirement in which i want to delete a object from QA envirement. One way to delete it is delete the object in developement and save it in a transport request. And transport that request to QA.
But can't delete the object from Dev environment. So is there any other way by which i can do this.
Thanks
Yogesh Gupta

Hi,
You need not worry about deleting the objects in QA now.
Have the set of objects which you will not be tranporting to PROD.
After your project is live and during support before handholding to the customer, clean your system DEV,QUA.
Reward Points if Useful.
Thanks,
Anita

Few line items are not coming at the time of creation of delivery

Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan S

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

Automatic Clearing of Down payment at the time of creating Invoice

Dear All,
I have created a Service Purchase order. This is assigned to a WBS element.Then i created a vendor downpayment request against this order using F-47 then posted same from F-48. Then i created service entry sheet and accepted it.Now when i am creating a invoice in MIRO for this Service order, system gives an information message that Downpayment exists. But invoice amount is not reduced by the amount. Also downpayment is not reversed automatically. Is there any way to achieve this? I had to manually Clear downpayment after invoice is posted.I want that to happen automatically.
Regards,
Kamal

Hi Rafi,
Thanks for this information. We are running on ECC 6.0 / EHP4 & also the biz funtion activated. .
As of now, we are receiving just an info msg at the time of MIRO.
Is mere activation of this biz funtion enough or do MM & FI need to configure something to achieve automatic downpayment clearing?
regards

Including transport request while modifying the custom table

Hello Experts,
I have a scnerio like, I have to insert/modify some records in my custom table. Now we want that these records should come under a transport request, so that we can track which records are for which user.
I am developing a report and including a parameter for transport request in the selection screen. So the report will take TR number directly from selection screen, but how to include it for the records inserted.
Regards,
Harjeet

Hello Altaf,
I think you did'nt understood my issue. I am not using and transaction. I am creating a report program which inserts new entries into my custom table based on the flat file on my presentation server.
Now I want these entries to be inside a transport request which is there in the selection screen.
Hope this gives the clear idea of my specification.
Regards,
Harjeet

Transport request coming at the time of creating doc type

Similar Messages

Maybe you are looking for