Transport Request Confirmation in CHARM
Dears,
I recently configured CHARM,Complted cycle of normal correction.
Now I logged on QAS and PRD not by solman but from them only but i didn't find request in mport queue of these systems even if i from SE01 of dev,I am able to see that these transport requests have implemented.
Now as I am understanding as these transport requests were implemented from different domain via domain link so might be i am not finding them in import queue,So please confirm from where I can check that these transports are imported successfully.
Shivam Mittal
Imports which have been triggered from the task list in Solution Manager will be removed from import queue after successful import.
Go to tx: STMS -> Import Queue and use "import history" to view imported requests.
You can also view the import history in Solution Manager using the task list (tx: SCMA).
/cheers
Similar Messages
-
Import transport request fails through CHARM
Hi,
I have configured CHARM on SolMan 4.0. For a support message, I could able to create change request and change document. I am having following two issues:
1. When developer enters into change document and try to change the status from "create" to "To be Developed", it is changing and coming back to same status "create" after save.
2. I am able to create and release transport request successfully from SolMan. But when I am trying to import into Quality box, it is throwing error, saying that "could not read the import queue of Quality box". Import I am doing from SAP Change manager task list.
All the prerequisite for CHARM have been successfully done, which I verified from SPRO, check CHARM.Hi Ruben,
Thanks for your quick update.
1. SLG1 logs shows error "unable to read CBQ import queue"
2. RFC Destination TMSADM@ from SolMan to QA connection test is working fine.
Thanks
Shiv -
Hi Experts,
What are the disadvantages of merging a Transport Request into other?
regards.Dear Kevin,
If you use Change Request Management, you should always use Change Request Management means to create transport requests; that is, create transport requests in a change transaction or in the task list.
Manually registered transport requests can be assigned to a task list only, not to a change transaction. If you use change transactions (reg. corection, urgnt corection), the system does not take into account transport requests that you added manually. Taht is the mani disadvantage.
You can find further details about how to register transport requests created outside ChaRM in following note:
1150426 - Registering transport requests in ChaRM
Kind regards,
Marta -
Tables in ChaRM- Transport Request & Tasks
Hi,
Need the table name which contains the Transport Request details & Tasks( In Transport Request) with statuses in solution manager and not in R/3.
In which table we get the details.
Regards
PKHi PK,
as you have E071, E07a... in satellite systems you have the same in Solman for transport requests of ChaRM.
All of them start with /TMWFLOW/REPExxx
For example E071 become /TMWFLOW/REPE71O or /TMWFLOW/REPE71R
I dont remember exactely whats the differeence between both. Does it refer to Open and Release. I ll let you confirm that cause i don t have ChaRM on my Solman here.
One more thing; if it s for reporting matters; be aware that they are not always as up to date as the ones in satellite
Threre is a job on your Solman that must be planned that updates them regularly. This job is something like cmssyscol2 if i remember well
Hope this helps
Regards
Khalil -
Unable to release Transport request in CHARM
Hi all,
After Setting up CHARM,created a Transport request,while releasing it thru CHARM gives error:"Release of system Q11 Could not be determined"
rgds,
rajesh
Message was edited by: rajesh
Rajesh MDear Rajesh,
1.Did you released the Task of the request in satellite system?
2.What error you get when you check inside the task list of that correction.
Please give inputs,which will help us in solving the issue faster.
Thanks and Regards,
Avinash. -
Transport request deleted - how can I delete the link in CharM ticket?
Hi everyone,
yesterday, I manually deleted an empty transport request in the development system. Bad idea, I know, because now, I get errors in the CharM ticket, because it still has a link to the transport request, which has been deleted.
How can I get rid of the broken link in the CharM ticket?
Thanks in advance,
Benhi
Please check if you can decouple transport request using charm
also if you can let us know what kind of error in charm ticket will be helpful
Saravana -
Unable to Create Transport request in more then one DEV client (in ChaRM)
Hi,
We are having 2 Landscapes,
DV1 (100) --> QA1(100) --> PR1(100)
DV1 (200)--> QA1(200) --> PR1(100)
Both these landscapes are added in the ChaRM Project landscape. When we have created a correction and created a Workbench request, we were getting the option to choose the DEV system and we chose DV1(200). When we tried to create a TR for Customizing in DV1(100) it did not provide the pop up for DEV systems and directly created the customizing request also in DV1(200). We were unable to even create the TR in DV1 (100) - using the task 'Create Transport request' in the Task plan for the corretcion (It gave an Error that the DV1(200) is the Development system for this change).
is this the standard behaviour? can't we have TRs from different client/ development systems under the same correction?
Please clarify?
Regards,
KathirHi
As i said earlier you will get option to choose system for creating Transport Request only in case of normal corr
but in case of urg corr
you need to give ibase for production of the cocerned landscape
e.g if u have ecc and bi and want to create transport in ecc then giv ibase for prd of ecc only
because you will not get pop up in urg corr
Hop doubt clarified
Regards
prakhar
Edited by: Prakhar Saxena on May 12, 2010 6:17 AM -
CHaRM-Is that possible to create multiple Transport Request in UC
HI Gurus,
Quick question on ur.gent correction using Solution Manager CHaRM in EHP1. Is it possible to create multiple transport request(TR) for single ur.gent correction (UC). DO NOT confuse with transport task.
For example, after I created transport request and developer start working and release the task, realised to add another transport request for same UC. When I tried, it did not create any TR but checked the message found that
Schedule Manager: Monitor
Job Status: Processing completed, but with warnings
Program Name: /TMWFLOW/SCMA_TRORDER_CREATE
Action to be checked: Ur.gent Correction: Create Transport Request
There is already an open request, XXXXXXXXXX, for this project
So only way I can do that I released the TR and able to create another TR.
May be wondering why I need to create another TR, why not create TASK and work on that.
But this is the requirement at our company.
I will appreciate the effort and time to provide me the solution of this.
Thanks
AvaHi Ragu,
That's really quick turn around. Unfortunately not able to found whatever you mentioned in your message. Here is detail,
I navigate to Actions - Depending on Status, found the entry as
Trans. Type StatProf UserStatus Seq Action in SAP Change Manager
SDHF SDHFHEAD E0002 10 CREATE_HF
SDHF SDHFHEAD E0002 20 CREATE_REQ
SDHF SDHFHEAD E0002 30 SAVE_PARTNER
SDHF SDHFHEAD E0002 40 SET BO LINKS
Where SDHF - Ur.gent Correction
E0002 - In Development
CREATE_HF - Create an Instance in SAP Change Manager
CREATE_REQ - Create Transport Request with Task
SAVE_PARTNER - Save Partners in Respective Partner Roles
SET BO LINKS - Sets Links to Business Objects
I don't see any OPEN_TR.
Any other place need to make change.
Thanks
Ava -
Merging Java Transport request with Abap Transport Request in Charm
Hello All,
We have activated the Change request Management in Solution Manager. Therefore transport request of type workbench and customising can be created when you choose action 'Create Transport Request'.
However we have some SAP systems that have CTS+ integrated which allows to generate transport request number and attach objects in PI Integration Directory - java transports.
Question is - Is there a way we can integrate the java transports generated in these SAP systems with Solution Manager CHarm and transport creation.
Or can we assign the java transports to charm in any way.
We are basically looking for how when users create Charm, the abap and java transports relating to the charm are generated and created only from Solution Manager manager or how these two transports can be linked together in Solution Manager.
Thanking you in advance for your help.
TollyHello Friends
I have read the links and followed the instructions and tried to create object
TABLENAME R3TR TABU and tried to save it.
I keep getting a warning message
Note: ZTABLE1 is an application table
Object TABU ZTABLE1 has object function "k", but no key.
(I don't know what key to enter. I tried the Key field name, but it said 'Enter Numeric values only').
If I ignore and save and try to create transport request and then import it on a different server, again only table structure is getting transported and not the contents/data of the table.
I would appreciate if some one can please let me konw what I am doing wrong.
Thanks
Ram
Edited by: Ram Prasad on Jun 2, 2009 3:38 PM
Edited by: Ram Prasad on Jun 2, 2009 3:40 PM -
Error when importing a Transport request in CHARM???
Hi all,
when i am trying to import a transport a request( thru CHARM) , its throwing an error " No valid system specified (Q11)" and "Import error: Check TMS Alert Viewer in target system"
Note::I was able to create a Transport request , release it but facing problem while importing to quality system.development system is ECC5.0 and quality is ECC6.0
rgds,
AnandHI abhi,
i havecreated the domain link, my ECC5.0 and ECC6.0 are in one domain of which ECC5.0 is domain controller,now i configured Solution manager as new domain controller and created a link between these two domains...
now my queries are:
1.is it enuf if i create a link between or even shud i create som transport routes between the newly added system from other domain and the existing domain
2.i am not able to see the STMS configuration in solution manager system.ie in my ECC5.0 system( domain ctrller)if i goto STMS->Overview menu-> transport routes i see the configuration, which i cannot see by logging into solution manager and wentto STMS->Overview menu-> transport routes i dont see
rgds,
Anand -
Error when creating transport request in Charm for Portal
Hello Guru's,
I'm configuring ChaRM for our Portal environment using CTS+
When I create a transport request I get the following error message:
Parameter EPD not in version of tp configuration.
Any thoughts????
Regards,
DavidHello David,
Please review the following SAP Notes to see if they will assist you on resolving the issue that you are having:
1107361 - Migration BAdI-Implementation Error Message XT 465
45548 - Transporting language-dependent objects
Hope this helps you out!
Thanks,
Mark -
ChaRM: read categorization of change docs based on transport request ID
Hi There,
We have ChaRM implemented with 4 level categorization. I am writing a report to find change docs and read their categorization based on a transport request attached to the change doc. Unfortunately I can't figure out the connection. Could you pls give me guidance? Thanks in advance!
ÁdámIn the meantime I found a very useful article on the wiki: http://wiki.scn.sap.com/wiki/display/Snippets/Reading+CRM+Transaction+Categories+Hierarchy
If you need my complete code, drop me a mail.
Thanks,
Ádám -
Issue in Transport Request of ChaRM
I have created a Transport Request made import'd to Q-Sys, Now i need to Make some changes I've set the status to IN-dev & made changes & saved ,also released the transport request, still no changes found, Plz suggest me a remedy?
hello Savithru,
the normal process to import in QSystem your change via charm is to run the action "test transport" when you are "in development" for normal change document (SDMJ). You need to release your task prior to this action.
This action will create a copy of your intial transport and will release it to the import buffer of your Q system. (the initial transport is NOT released). You can see the transport number in your log in your change document.
The actual import in Q needs to be scheduled manually or automatically
Do you see your transport of copy in the import buffer of your Q-System ?
I hope it helps
br Xavier -
CHaRM-Handling old transport request before CHARM was activated.
Hi All,
Recently i just activated CHARM in solman-SM1 for new a project implementation. This CHARM was setup in in such a way that it tie to one of the local IMG project EPROJ in developmemnt-DEV. Now i have one concern and that is those transport requests where created before i activated CHARM.
These old transport requests were crerated directly in DEV without project assigned. Therefore, we tried to assign IMG project EPROJ (the same IMG project setup in CHARM) into those old transport request manually.
Problem : When i tried to perform released step in CHARM tasklist it says that "No transport request found"
Question : How do i make CHARM to pickup those old transport requests?
Really appreciate your feedback as there are a lots of old transport request which needed.
Thank you.Hi,
If you use Change Request Management, you should always use Change Request Management means to create transport requests; that is, create transport requests in a change transaction or in the task list.
Manually registered transport requests can be assigned to a task list only, not to a change transaction. If you use change transactions ,,,,the system does not take into account transport requests that you added manually.
This note is what you want
Note 1150426 - Registering transport requests in ChaRM
Hope it solve ur problem completely.
Regards
Prakhar -
CHARM : Sequence of transport request to import
Hi,
I'm configuring CHARM and found out below issue.
Scenario.
1) Charm project with project type implementation was created in SOLMAN. The type of change is normal correction. All transport request was created under 1 task plan. The transport was created based on configuration and some of the transport request have dependency to others transport request.
For example.
a)GL account need to be created in FI and was assigned to TR002.
b) MM need to configure the GL account that was created in a) and was assign to TR001
Issue
When the TR was release, how do we ensure that the sequence of import to QAS client and PRD client must follow the dependency of the TR created?
Appreciate your input.
regards,
BiahHi Sir,
I am working in SAP Solution Manager. I would like to know some concepts regarding CHaRM:
Currently our project is using Transoport Proposal. We will soon shift using CHaRM. But I am not aware of the Technical concepts.
1. How to configure CHaRM with the Tranport Proposal Flow.
2. How to navigate in CHaRM? (screenshots can help).
3. I am aware of the process but still after creating a CHaRM how do the Developer navigate to do a change in DEV system.
will he go through CHaRM. (please explain me).
4. Also explain me the total process from technical point of view till the CHaRM closure.
5. I am aware of SOLMAN in this process where the Charm requests are collected and monitored.
Hope I will get a good guidance from your end....
Maybe you are looking for
-
Can't Play iTunes with a catch
Got the 30G iPod yesterday, though I've been using iTunes for some time. It won't play anything I've purchased on iTunes, either in the past or now. I deauthorized and reauthorized my computer. I did numerous restores. I recreated my iTunes library.
-
Error during Variable Substitution
Hi Experts, Pls go through the errors I am getting the following error in RWB>Messages Monitoring->Adapter Engine It is in Production, Many messages are successful but 40% messages are failed with this Error The following is the Error log Attempt to
-
Button from External SWF to Play Movie in Main SWF
Hi Guys, Ok I'm working in Flash 8, Action Script 2; I'm building a website, in which the 'Gallery Page' has a link to an external swf file, which is a scrolling clip of thumbnails. What I want to do, is create each thumbnail into a button, which wil
-
Are the passive and active matrix screens on the G3 12.1" PB's completely interchangeable? Can I just replace a passive with an active with no changes inside (inverters or whatever)? PB G4 1.33 Ghz 15 PB 170 8mg OS 7.1 Mac OS X (10.3.4)
-
Auto expand of layout or reports
Hi, I have developed a report which prints a bill on a letterhead, as a developer i designed it in such a way that the contents do not cross beyond one page (keeping in mind the maximum data) but when the user selects some data its shrinks(i made the