Transport request could not be released

hi guys,
im trying to release a request thru se09
after successfully releasing the task.the request could not be released.
it gives this error message
TEST CALL OF TRANSPORT CONTROL PROGRAM (tp) ENDED WITH RETURN CODE 0212.
<removed_by_moderator>
Read the "Rules of Engagement"
Regards Walata
Edited by: Juan Reyes on Oct 13, 2009 4:40 PM

hi Mark,these are the results of the actions you specifiedWhen i tried to open the tp system log, this is wat i get"Could not open log file
wc40-altsapmnt     ranslog"for the checksconnection test"connection to system DEV OK"transport directoryCheck transport directory      14.10.2009 10:36:27           DEV Development System                Transport directory                 bin
wc40-altsapmnt     rans in               Create test file        Read test file        Delete test file               buffer
wc40-altsapmnt     rans uffer               Create test file        Read test file        Delete test file               cofiles
wc40-altsapmnt     ranscofiles               Create test file        Read test file        Delete test file               data
wc40-altsapmnt     ransdata               Create test file        Read test file        Delete test file               log
wc40-altsapmnt     ranslog               Create test file        Read test file        Delete test file               sapnames
wc40-altsapmnt     ranssapnames               Create test file        Read test file        Delete test file               tmp
wc40-altsapmnt     rans     mp               Create test file        Read test file        Delete test file    there is a ZIG ZAG arrow in front of each.while for the transport toolunder the tp interfacethe test was ok i.e. a green mark sign was there for all the items in the drop down listunder transport filethe check for path was marked okfor profile "tp profile cannot be read"for version "tp profile has an invalid formatunder RFC destinationthe test was ok i.e. a green mark sign was there for all the items in the drop down listunder tp callRFC and tp version successfulfor DBCONNECT "link to database failedoffline call "could not access file as supposedhow do i get the error information in the tp system log when i cant even view it
Regards WAlata

Similar Messages

Request could not be released.

Hi,
We have a request which contains objects from Business Content activation. these objects are in large numbers.
The problem is that when we release subrequest it get released but when we release the main request it gives error code with 8, we analysed the log, it says that there are some infoobjects which are in version 'new'. and main request can't get released.
We tried to collect those objects in another request, but those objects are locked in main request which could not be released.
now the problem is that how to release main reques or resolve this issue in all.

Hai I would suggest firstly unlock your main request which you created mainly with infoobjects in new version .
Probably you wont have authorization unless a power user
ask your basis guyz to unlock in se03 tcode after unlocking
collect the infoobjects independently see to that they are in active version and then move from different request if required.
or use the old request itself shouldnt be a problem before that see to that all infoobejcts are in active version.

How could we delete transport request and task(the released one)

Hello
We have a released transport task(not request). Transport request is not released.
How could we delete transport request and task(the released one). Namely we would not like to transport it to production

Hi, never delete directly in table.
There are more tables which depends each other...
Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
Using program: RDDIT076 and changing status.

Transport Monitor could not complete your request (16)

Transport Monitor could not complete your request (16) is the message I keep getting lately when I try to hotsync my palm IIIc with my 24inch imac running OSX 10.4.11. I'm also using Keyspan serial adaptor for the palm to a USB port. I've been able to hotsync on this machine before the only thing different was that I unplugged the cable once from the USB port to use a flash drive. Now everytime I try to enable hotsync via the hotsync software setup panel I get the above message.
Any ideas about what to do? Thanks in advance.
Post relates to: Palm IIIc

I have recently been receiving a "Transport Monitor could not complete your request" error, though with the tag (-4960) at the end. This error appears upon computer startup, ever since I had to reinstall Mac OX 10.5.2 on my computer. Everything worked fine with the same computer until that reinstallation. Now, nothing happens on my computer when I try to USB-synch my Treo 680, though it works fine on other computers.
I have tried repairing disk permissions. I have also tried deleting all the files for Palm Desktop and reinstalling it. When I did so, I received the same error message during the installation process!
What can I do?
Thanks
EDIT: Perhaps relatedly, something seems to be malfunctioning in the HotSync Manager application. When I open it, the default window with "HotSync Software Setup" does not open. I can select other menu options (e.g. "Install Handheld Files" ), but if I select "Setup" from the HotSync menu, nothing happens.
Post relates to: Treo 680 (Cingular)
Message Edited by emergent on 03-30-2008 08:27 PM
Message Edited by emergent on 03-30-2008 08:28 PM

Transport monitor: could not complet your request (16)

I had been syncing my palm T!X with my G4 laptop.
I change to a macbook core 2 duo with OS 10.5.8
I have installed palm package 4.2.1 rev D .
When I restart the laptop during the startup I get this message: Transport Monitor: could not complete your request. (16).
I cannot sync my palm.
help!!!
Ron
Post relates to: Tungsten C

Hello Ron and welcome to the Palm forums.
You may want to check out this thread to start troubleshooting.
Alan G

Crystal Reports VS 2008 "The request could not be submitted for background processing"

Hi,
I am going to try to explain this issue the best I can. Please let me know if you need any other information or have any ideas as I have exhausted my resources. We have an ASP.NET application that has highly formatted crystal reports in them that the users can export as PDFs. All reports export without a problem when the application is run off of our desktops. The reports use a sql server authenticated user, executing stored procedures, and each subreport is linked by the main parameter. We are using Visual Studio 2008 version 3.5 SP1 with Crystal Reports Basic for Visual Studio 2008 on Windows 7 Enterprise SP1. We have designed the reports in Crystal Reports XI Release 2 (11.5.12.1838) and imported them into the ASP.NET application. When trying to export the reports as PDFs from the development or production servers, we get the error message below for some, not all, reports:
System.Runtime.InteropServices.COMException (0x800002AD): Error in File C:\Windows\TEMP\KeyAccountProfile {9FA5C095-77A2-425D-AC6B-8BB66B435336}.rpt: The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
We have cleared the temp directory on the servers before exporting and are still receiving the error. We have installed Crystal Reports Basic Runtime for Visual Studio (10.5.2.0) on both servers. I have identified the underlying issue to one stored procedure/subreport that is causing the report to fail. The weird thing is, when we change the connection to point to development, the stored procedure/subreport runs fine for the report that generates an error when run from production, and the data is the exact same. I have tried rebuilding the subreport but the error still appears even though it runs fine for other reports.
I have been through the document below, and othe similar issues in the forums, but still have not found a resolution. I was trying to use the "modules" application put since this is an ASP.NET application I am unsure of which executable I should be looking at.
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33?QuickLink=index&overridelayout=true&36837934524320
Thanks in advance for your assistance,
Brad Hood
06-26-14
OK.. I did some more investigating on this today. I have found out when I move the sub report that generates the error under another sub report, the sub report in question runs without issue. But when I try and move the sub report that produces the error above any other sub report, the error still generates. Can this get any weirder.... FYI.. there is a total of ten sub reports on this report.

Hi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Error: The request could not be submitted for background processing

I'm getting an intermittent error in our custom reporting application using Crystal Reports Server XI R2 w/ SP1:
Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt: The request could not be submitted for background processing.
I'm using the Report Application Server XI Release 2 .NET SDK. This is the code that produces the exception (The export type is pdf):
ByteArray ba = this.reportClientDocument.PrintOutputController.Export(ConvertExportReportTypeToCrystalReportExportType(),0);
The error is also logged by Business Objects in the crystalras log file:
ErrorLog 2007 12 3 12:24:56.531 6624 4872 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:685 ErrorMsg:" Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt:
The request could not be submitted for background processing." DetailedErrorMsg:""
This has been happening regularly about once a week, at which point the RAS fails and no more reports can be run until the CMS and RAS servers have been restarted.
Has anyone else had this problem, or have any ideas?
Thanks

It was not a bug (not in all cases anyhow), but it is one of those error message that might as well say; something went wrong. I wrote an article on the most likely cases for the error and the article can be downloaded from here;
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33
See if the above article will help you out. Please note that having the latest SP / FP is step one. The downloads page is here;
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

I download whats app and delete it an now i can't find it on app store..when i download from safari it write "your request could not be completed" tell what to to to find and download

i download whats app and delete it an now i can't find it on app store..when i download from safari it write "your request could not be completed" tell what to to to find and download

Go into your account in the App Store, sign out, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.], go back to the Apps Store, sign in and try again.

Transport request is not generating in Development

Hi Friends ,
Transport request is not geting generated in develpment system........so what could be the problem....
RB

Hi Raghavendra,
Can you give me some more details ? Which support package ? What kind of transport (java or abap) ?
Have you configured CTS+ ?
Best regards,
GL
http://newitbizz.blogspot.com/

BEx Transport Requests '' ist not available or not suitable

hi, all,
I want to change a query, that has been transported back from Prod.System into TestSystem. Changes in the query aren't possible - the error message is
" BEx Transport Requests '' ist not available or not suitable ".
Now, there is a Standard BEx Transport Request and, in the RSA1 -> Transport Connection I see the query complete with that Transport Request.
What can the reason be? Any Idea?
Thanks a lot in advance.
neven

Ciao, Paolo,
thank you for the quick responce.
I did exactly as described :
The easiest thing to do is the following:
1) collect your query in transport connection
2) check if it is already assigned to a transport
2a)if assigned to a transport check if this is the standard bex transport. If so go to step 3, If not see if you should just tranport that request (or you can just go to step 3...but i wouldn't advise that)
3) unlock the standard bex request
4) now go back to transport connection and put the collected objects in a new request
5) release and transport your new request
It still doesn't help. I can't change the Query. The error-message is stil the same.
best regards
neven

Bex Transport request is not available

Hi guys
I want to change the Bex query from query designer, when i go for change mode it didnu2019t allow me to change and throws error message "Bex transport request " is not available or not suitable" and in second line it gives "choose an existing request.
Can any one tell me how to change the Bex query with a transport request?
Gaurav

Hi,
You get this message if you have captured the query in a transport request and released or transported the request.
You can somply capture the query in a new request again from transport connection and then you will be able to edit the query.
even after capturing the query in the request is not allowing to edit then you need to try the option as explained by our friend above.
Regds,
Shashank

The request could not be submitted for background processing.

Post Author: Chriss
CA Forum: Administration
It's an BOE XI SR2, on Win2k3 server, with a print cluster with two print spools, handling 3000+ printers. I discovered this error to be intermittent and only on one of the spools. It turned out that the only common factor was an HP4250 print driver. I backed all the 4250s down to 4200 drivers and the intermitent error ("Error in File. The request could not be submitted for background processing.") went from about 100 a day to zero. The other spool had a different version of the HP4250 driver and would on rare occassion cause this error, "Error in File ... Page header or footer longer than a page." but never the background processing error.
For reference, when I got this error in XI R1, this was the solution for 'the error with one name and many causes':The error "The request could not be submitted for background processing" can be related to a corrupt or wrong versioned crpe32.dll in the Crystal bin folder. Renaming to crpe32.dll_bak and using the repair command in the the "Add/Remove Programs" tool in the "Control Panel" will reinstall the correct dll. Then restart the Crystal services.

Post Author: krishna.moorthi
CA Forum: Administration
For Crystal reports :
Error : "The request could not be submitted for background processing"
I think,this was not related to a corrupt or wrong versioned crpe32.dll.
but the below mentioned is one of the reason for getting this error.
I got the error when the main report(crystalreports10) having more than 2 subreports not assigned proper tables for the subreports.
Example: (this code raise the abone mentioned error.)
rpt.SetDataSource(Exdataset);
rpt.Subreports["subreportname1"].SetDataSource(Exdataset); // Exdatatset.Tables[1]
rpt.Subreports["subreportname2"].SetDataSource(Exdataset);// Exdatatset.Tables[2]

Error in File UNKNOWN.RPT: The request could not be submitted for backgroun

I receive: Error in File UNKNOWN.RPT: The request could not be submitted for background processing.
The error is on a windows Server 2008 SP2 production server. The report generates fine if I run it from within Visual studio 2008 on the server but not through IIS. The Crystal Reports is the version that came with vs2008 (10.5).
Initially I was getting unauthorized access errors so I granted full access to everyone for the bin and managed crystal report folders under program files. This fixed the unauthorized access problem but now I get the background processing error. I also tried to inpersonate an admin account with the same result. I tried to copy the crystal reports dll's to the bin folder for the project but that did not help either. I am running out of ideas. I did notice that a 16kb rpt file is generated in the Windows/temp folder every time I try to run the report.
the crashing page is here Link:[http://futuretechgroup.com/cgi-bin/crystaltest.aspx]
Here is the event log:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 5/24/2010 12:24:56 PM
Event time (UTC): 5/24/2010 7:24:56 PM
Event ID: 87ee3d9297fb409ea7b440b059a0f07d
Event sequence: 4
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/5172/ROOT-1-129192026961318172
    Trust level: Full
    Application Virtual Path: /
    Application Path: C:\inetpub\vhosts\futuretechgroup.com\httpdocs\
    Machine name: FTG2009
Process information:
    Process ID: 3644
    Process name: w3wp.exe
    Account name: FTG2009\IWPD_1(yanoshftg)
Exception information:
    Exception type: CrystalReportsException
    Exception message: Load report failed.
Request information:
    Request URL: http://futuretechgroup.com/cgi-bin/crystaltest.aspx
    Request path: /cgi-bin/crystaltest.aspx
    User host address: 70.173.237.72
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: FTG2009\IWPD_1(yanoshftg)
Thread information:
    Thread ID: 5
    Thread account name: FTG2009\IWPD_1(yanoshftg)
    Is impersonating: False
    Stack trace:    at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at cgi_bin_CrystalTest.CreateReport() in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 15
   at cgi_bin_CrystalTest.Page_Load(Object sender, EventArgs e) in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 9
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

1. The OS is 32bit
2. Yes. The C drive is the primary drive
3. For the sake of simplicity and to troubleshoot the sample code has no datasource just 'Hello' in the report header. The Actual work order report that I need has ADO as datasource and it builds a PDF report without any problems when I run the page from VS2008 (development server) so I think the dll's are where thay are supposed to be. The c:\windows\assembly folder has about 25 CrystalDecisions files (10.5.37).
Do I still need to create a deployment package even though I have everything else working?
Below is the code I am using to create the report
    Sub CreateReport()
        Dim myReport As New ReportDocument
        'Try
        myReport.Load(Server.MapPath("CrystalReport.rpt"))
        'Catch ex As Exception
        'MsgBox(ex.InnerException.ToString)
        'End Try
        Dim g As Guid = Guid.NewGuid
        Dim woPath As String = "../FileTemp/" & g.ToString & ".pdf"
        'Try
        Dim CrExportOptions As ExportOptions
        Dim CrDiskFileDestinationOptions As New _
        DiskFileDestinationOptions()
        Dim CrFormatTypeOptions As New PdfRtfWordFormatOptions()
        CrDiskFileDestinationOptions.DiskFileName = _
                                    Server.MapPath(woPath)
        CrExportOptions = myReport.ExportOptions
        With CrExportOptions
            .ExportDestinationType = ExportDestinationType.DiskFile
            .ExportFormatType = ExportFormatType.PortableDocFormat
            .DestinationOptions = CrDiskFileDestinationOptions
            .FormatOptions = CrFormatTypeOptions
        End With
        myReport.Export()
        'Catch ex As Exception
        'MsgBox(ex.ToString)
        'End Try
        Response.Redirect(woPath)
    End Sub

Error: Your request could not be completed because a failure occurred while the report was being processed.

Post Author: sagimann
CA Forum: Deployment
Hello,
I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
My env is:
Solaris 10 64 bit
Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
Important bouser env:
ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
TNS_ADMIN=$ORACLE_HOME/network/admin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
I reboot the box, then start BO like so:
cd /opt/reporting/bobje
. setup/env.sh
./mysqlstartup.sh
./startservers
./tomcatstartup
Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
Error:
Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
May 5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
pls advise,
thank you.

The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
The explanation, from a comment in the above linked blog post:
"To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
Edited by: abirdman on Feb 3, 2012 9:49 PM

Request could not be submitted for background processing

Using Crystal Reports XI R2
 Using Visual Studio .NET 2005
 
 Here's the scenario. The client goes to run a report and specifies the filters they want for the report. We load a pre-built rpt with no saved data and pass the filters in to the report via the parameters. We then generate and export the report to another rpt file with saved data using the PULL method from the report itself. When the viewer wants to view the report the file (with saved data) is copied locally to the web server and the CrystalReportViewer control is pointed at the rpt with the saved data in it. In almost every case the reports come up fine and display in the viewer no problem. The error above (Request could not be submitted for background processing) tends to show itself in the CrystalReportViewer control whenever the report has large amounts of data (like 8 megs worth). I've tried everything I can find on this issue including the steps listed in the white paper for this issue.
 
 So just to be clear on the steps taken:
 1)If I take the saved rpt and open it in Crystal Reports itself then it works fine.
 2)If I point to the rpt with the CrystalReportViewer control in my development environment it works fine.
 3)I've run Process Monitor and there were a couple of access denied messages to one of the HKLM registry keys but I modified the permissions so those went away but the problem still remained
 4)As far as I can tell the report has no design issues. Nothing runs over any edges, no overlapping of any kind, the Font itself exists on the machine in question.
 5)Its not a dataset problem since the report is using the PULL method to generate itself plus the rpt with saved data is correctly generated its just showing the above error when trying to view it in the control.
 6)The client is using a WIndows 2003 server, with 4 Quad Core processors and 8 gigs of RAM and 100 gigs of hard drive space remaining (so hardware is not an issue)
 7)In code the ReportDocument object is inside a using statement (C# .NET) and only exist for the brief period needed to create the rpt with saved data. So they are getting closed and disposed of correctly. Also as pointed out above the rpt with saved data is already being generated correctly its just not displaying in the control.
 
 So to recap on a web server used by multiple people whenever a user tries to view a saved rpt file that has a large amount of data using the CrystalReportViewer control the error above tends to get generated even though the vast majority of the reports do display. I'm at a loss for what else to try to make the report display correctly in the control. Any thoughts would be helpful.

Make sure you are using SP6:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Runtime
msm:
https://smpdl.sap-ag.de/~sapidp/012002523100000634042010E/crxir2sp6_net_mm.zip
msi:
https://smpdl.sap-ag.de/~sapidp/012002523100000633302010E/crxir2sp6_net_si.zip
Other than that, I'd consider installing the CR designer - as a test, on the user machine and see if the designer can open the report.
Ludek

Transport request could not be released

Similar Messages

Maybe you are looking for