Transport Request - Delete Object

Dear Expert,
I have a problem with two transformation in Quatility System, I don't have authorization to delete in the Quatily System. I have deleted in the develoment syste but I have lost the transport request with this taks for to do this. How can I recover the taks in Development System and create a new transport request to delete two transformation in the Quality System.
Thanks for your time,
Luis

Dear Alexander,
Thank for your suggestion, but both transformations doesn't excite in the source system (Dev). The cases is I delete both transformation in the Dev system a lost the transport with delete action to Quality System, and I can't recover these object. The other solution was created again with the same technical name isn't possible because they are transformation object, and you canu2019t set up the technical name.
I really appreciate your suggestion,
Luis

Similar Messages

How to create transport request in object transport

How to create transport request in object transport from server to server
thanks in advance
arya

hi,
when ever u r creating any object in devlopment and saving it will ask for request.create request and release in se09.
put mail to basis people to transport ,thy will transport using STMS transaction.

Transportation of deleted objects

Hello All,
some unnecessary Queries and workbooks are transported to Test system and then to Production.Instead of deleting them manually in each system,i think we can delete them in development and write to transport request and then transport it to test and production systems..
can anybody let me know the procedure?
Bye.

Hi Rakesh,
Normally you can use RSZDELETE for deleting queries and other reporting objects in Dev Also. If such a object was already transported before, you will automatically get a transport request for the deleted object. There is no need to goto the transport connection for that. After releasing and tranporting the request, the objects will automatically be deleted in the target systems.
If you clear your open bex request and then do the deletions that you want to do, the only things in your bex request will be the queries to delete. If it is collecting other objects that you don't want to transport, you can manually remove those objects from your transport.
Hope this helps,
Sudhakar.

Transport Request Deleted

Hi Experts,
I deleted some cubes, DSO's, MP and objects which is not required in Dev. and collected all these in one Transport Request, but Unfortunately some one deleted this TR before releasing into QA. Now i dont have all these cubes, DSO's, MP and objects as well as Transport request in Dev, now i want to delete in QA. how can i achive this?
Directly deleting in QA is ruled out even client is not accepted.
Can any one help me out on this?
Thanks in advance
David

Hi ,
Please check the following link :
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/c7/69bcd5f36611d3a6510000e835363f/content.htm
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/c7/69bcd2f36611d3a6510000e835363f/content.htm
Thanks
Kamal

Transport request deletion

Hi,
Can someone tell me how to delete a transport request.
thankyou.

Hi Vijayanti,
You would first have to delete all the objects entries for objects locked in the request. You can do this isn the SE09 screen > Open up your request > highlight the objects one by one and click the Delete icon (trash bin). The system will prompt that the object is locked. Say ok and then then next propmpt will ask if it is to be deleted from the locked objects list..say Yes to this.
If there are a lot of objects, then you can go to SE03 > Unlock Objects (Expert Tool) and unlock all the objects in one go, instead of one by one.
Hope this helps...

Transport Request delete?

Dear BW Gurus....
i have transport request and i transported that request to BWD system. after that i found that there was a problem with that request. now i want to delete that request. while deleting the request it is saying the objects are locked. how can i unlock the objecs...
Regards,
kasi reddy.

HI
Go To SE03 and Click on Unlock Objects(Expert Tool)Under Requests/tasks.
In other Way go to SE10 and locate the Transport request.
Delete all the objects( Right Click on the Object in the Transport Request and "Select Delete") beneath the Transport request and finally delete the Transport Request.
Pls don't forget to Give Points-- If this is usefull--Its the ways of Thanks.
Thanks
Hannu

Transport request deleted - how can I delete the link in CharM ticket?

Hi everyone,
yesterday, I manually deleted an empty transport request in the development system. Bad idea, I know, because now, I get errors in the CharM ticket, because it still has a link to the transport request, which has been deleted.
How can I get rid of the broken link in the CharM ticket?
Thanks in advance,
Ben

hi
Please check if you can decouple transport request using charm
also if you can let us know what kind of error in charm ticket will be helpful
Saravana

Transport request and objects

hi experts,
can anybody tellme how u transport requets and how u transport objects.

hi,
You can check all the requests in SE01 or STMS.
You should know how STMS works at least.
In STMS you normally select the system (DEV/QA/PRD) for which you want to look at transport requests. After selecting the relevant system, you normally get to see the 'IMPORT QUEUE'. This means the following:
(make sure you press the REFRESH button first)
1) transport requests in the import queue of your QA system are not imported yet. (imported ones, you can find back via the menu by selecting the 'IMPORT HISTORY'.
So if you want to find out about requests that are already on your QA system, but NOT on your productive system, you just select PRD , and look at your import queue for this particular system. These transports that you see there are ALREADY imported on QA , but not yet on the production system.
Case Closed I would say, not??
The only thing that might make my statement 'uncertain' is if the company has a specific 'approval procedure'. For example, suppose you have released a new development on your development system. An automatic job imports every hour all released transports from your development system into your QA system. (ofcourse you can always manually import a request).
Now after an hour the request is automatically imported on your QA system and you can do the necessary Unit and Integration testing.
Now, under normal circumstances, after import of your request on the QA system, in STMS it will automatically appear in the import list of the production system.
In case of the approval procedure however, you first might need to select tested requests, select them, approve them (via an approval button ) and run a job to release all approved requests. Only after they are released by the job, they will appear in the Import Queue of the production system.
But ok, I only saw this in practice at one customer so far...but just that you know
regs,
hema.

Table for transport request deleted.

hi,
Can anyone please tell me the table name where transport request which are deleted are stored.
Sonali.

Sonali,
there is two table like *E070 and E071* and also you can search in SE03 also.
Amit.

CREATING TRANSPORT REQUEST TO OBJECT

Hi All,
I created an object in a LOCAL OBJECT. Can I create Transport Request for that iobject. If so how ?
Thanks & regards ,
Mani.

Hi Mani,
Please check the thread,
how to assign a request number to the local object
Regards,
Hema.
Reward points if it is useful.

Transport Request - saving objects in workbench request

Output of my Report is ALV. In that I have One button in the application toolbar and I have checkbox as a column to select the displayed entries. If I select that button the selected entry( in my case 'Role') has to be saved under a customizing request'.
    In my case it is saving the object under 'WORKBENCH Request'.
Is there any Function module to do this .
    I have used 'TR_REQUEST_CHOICE' fn module to get that create request pop up screen and for appending entries I have used 'TRINT_APPEND_TO_COMM_ARRAYS'.(IT is saving the object under WORKBENCH ReQUEST, But I need it in CUSTOMIZING REQUEST)

Hello Nievetha
The mass transport function in the profilgenerator (PFCD) is executed using report <b>PFCG_MASS_TRANSPORT.</b>
For a single role you could directly use function module
CALL FUNCTION 'PRGN_TREE_HANDLE_UCOMM_NAVIGAT'
    EXPORTING
      okcode             =' TRAN'                  " transport role
      agr_name_neu       = <name of role>.
Since you would like to put multiple roles into a single transport request you can do the following:
SUBMIT pfcg_mass_transport
        with agr_name ... = <list of roles as range>
        with comp_rol ...   = <with or without composite roles>
        with profiles ...      = <with or without profiles>
AND RETURN.
Regards
Uwe

Transport request wise Object list

Hi,
We have a list of one thousand transport requests.Now we want to know the names of objects associated with these transport request.We can go to SE09 and search for each transport request manually.Is there any other table? Or any other way out?
Thanks,
Manohar

hi,
Chk this table :
E070 - Transport system header of Request/tasks
E070A - Transport system attributes of a request.
Also there are many tables with informaton on Transport request. E* and see the list in se16.
Regards

Transport request deleted from buffer how to retain it?

Hi geeks please help me.
As the support package upload,i have found that some transport request request are blocking the support package upload.The error issued was Queue_not_empty .I went to command prompt to get the list of transport request with status "will not be import because it is tagged".
then to remove them from the buffer I executed commands
tp addtobuffer <tr.request> <SID> pf=<path of tp profile> U1 tag=SPAM
tp delfrombuffer <tr.request> <SID> pf=<path of tp profile> tag=SPAM
.But now I see the transport request in the queue is in "RED" status.
I need to retain the transport request and reimport it.Is there any way to do that?
I have both K-file and R-file corresponding to this requests in cofile and data directories respectively.
Regards
Syamkrishnan

Hi Syamkrishnan,
just copy the cofile and data file in the transport directory, then go to STMS click on Extras -> Other requests -> Add and add the transport to the queue.. then just reimport.
Hope this help
Juan
Please reward with points if helpful

Transport Request Number - Object Status is LOCKED. What does it mean?

Hi Friends,
When checking in SE09 transaction my TR number "Object Status" is showing as LOCKED.
What does it mean
Whether I can transport objects under this TR Number to Quality System?
Will it give any problem while transporting?
Regards,
Viji.

The main reason to lock the request is to avoid any duplications.
You can also unlock the request if you want using SE03 transaction.
Goto SE03 transaction,select unlock objects and execute.give your
request number and execute.it will be unlocked.

How to delete transport request if child request was released

Hi,
By mistake i released child request but not parent request, but i want to delete whole transport request. it is not allowing to delete it, because child request as releaed.
Thanks,
Subbu.

Not good news..check the below link, it says you cannot delete it but maybe you can get an idea..
Deleting a transport request
Delete Transport Request
A similar case..
Re: How to delete the Transport Request release from SE09

Transport Request - Delete Object

Similar Messages

Maybe you are looking for