Transport Request Deleted

Hi Experts,
I deleted some cubes, DSO's, MP and objects which is not required in Dev. and collected all these in one Transport Request, but Unfortunately some one deleted this TR before releasing into QA. Now i dont have all these cubes, DSO's, MP and objects as well as Transport request in Dev, now i want to delete in QA. how can i achive this?
Directly deleting in QA is ruled out even client is not accepted.
Can any one help me out on this?
Thanks in advance
David

Hi ,
Please check the following link :
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/c7/69bcd5f36611d3a6510000e835363f/content.htm
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/c7/69bcd2f36611d3a6510000e835363f/content.htm
Thanks
Kamal

Similar Messages

  • Transport request deleted - how can I delete the link in CharM ticket?

    Hi everyone,
    yesterday, I manually deleted an empty transport request in the development system. Bad idea, I know, because now, I get errors in the CharM ticket, because it still has a link to the transport request, which has been deleted.
    How can I get rid of the broken link in the CharM ticket?
    Thanks in advance,
    Ben

    hi
    Please check if you can decouple transport request using charm
    also if you can let us know what kind of error in charm ticket will be helpful
    Saravana

  • Table for transport request deleted.

    hi,
    Can anyone please tell me the table name where transport request which are deleted are stored.
    Sonali.

    Sonali,
    there is two table like *E070 and E071* and also you can search in SE03 also.
    Amit.

  • Transport request deletion

    Hi,
    Can someone tell me how to delete a transport request.
    thankyou.

    Hi Vijayanti,
    You would first have to delete all the objects entries for objects locked in the request. You can do this isn the SE09 screen > Open up your request > highlight the objects one by one and click the Delete icon (trash bin). The system will prompt that the object is locked. Say ok and then then next propmpt will ask if it is to be deleted from the locked objects list..say Yes to this.
    If there are a lot of objects, then you can go to SE03 > Unlock Objects (Expert Tool) and unlock all the objects in one go, instead of one by one.
    Hope this helps...

  • Transport Request - Delete Object

    Dear Expert,
    I have a problem with two transformation in Quatility System, I don't have authorization to delete in the Quatily System. I have deleted in the develoment syste but I have lost the transport request with this taks for to do this. How can I recover the taks in Development System and create a new transport request to delete two transformation in the Quality System.
    Thanks for your time,
    Luis

    Dear Alexander,
    Thank for your suggestion, but both transformations doesn't excite in the source system (Dev). The cases is I delete both transformation in the Dev system a lost the transport with delete action to Quality System, and I can't recover these object. The other solution was created again with the same technical name isn't possible because they are transformation object, and you canu2019t set up the technical name.
    I really appreciate your suggestion,
    Luis

  • Transport Request delete?

    Dear BW Gurus....
    i have transport request and i transported that request to  BWD system. after that i found that there was a problem with that request. now i want to delete that request. while deleting the request it is saying the objects are locked. how can i unlock the objecs...
    Regards,
    kasi reddy.

    HI
    Go To SE03 and Click on Unlock Objects(Expert Tool)Under Requests/tasks.
    In other Way go to SE10 and locate the Transport request.
    Delete all the objects( Right Click on the Object in the Transport Request and "Select Delete") beneath the Transport request and finally delete the Transport Request.
    Pls don't forget to Give Points-- If this is usefull--Its the ways of Thanks.
    Thanks
    Hannu

  • Transport request deleted from buffer how to retain it?

    Hi geeks please help me.
    As the support package upload,i have found that some transport request request are blocking the support package upload.The error issued was Queue_not_empty .I went to command prompt to get the list of transport request with status "will not be import because it is tagged".
    then to remove them from the buffer I executed commands
    tp addtobuffer <tr.request> <SID> pf=<path of tp profile> U1 tag=SPAM
    tp delfrombuffer <tr.request> <SID> pf=<path of tp profile> tag=SPAM
    .But now I see the transport request in the queue is in "RED" status.
    I need to retain the transport request and reimport it.Is there any way to do that?
    I have both K-file and R-file corresponding to this requests in cofile and data directories respectively.
    Regards
    Syamkrishnan

    Hi Syamkrishnan,
    just copy the cofile and data file in the transport directory, then go to STMS click on Extras -> Other requests -> Add and add the transport to the queue.. then just reimport.
    Hope this help
    Juan
    Please reward with points if helpful

  • How to delete transport request if child request was released

    Hi,
    By mistake i released child request but not parent request, but i want to delete whole transport request. it is not allowing to delete it, because child request as releaed.
    Thanks,
    Subbu.

    Not good news..check the below link, it says you cannot delete it but maybe you can get an idea..
    Deleting a transport request
    Delete Transport Request
    A similar case..
    Re: How to delete the Transport Request release from SE09

  • How to collect the deleted query in a transport request.

    Hi Friends,
    I have created a query and transported it to the Quality, the data content is all ok, except that i have not used the Project Naming conventions. Now i have a defect against my name for this. I have to copy the same query with the correct Naming convention and transport it.
    My question is after copying the query with correct name i have to delete the old query (if not there would be 2 versions of the same query). How do i collect the deleted image of the query in a transport and send it to quality?.
    I tried deleting a test query from Bex Designer, but this does not ask me for a transport. should i use RSZDELETE?. Not sure if it asks for a transport request when i delete the query.
    Can someone pls tell me how to go about this?.
    Thanks in advance.
    BN

    Hi BN,
      I do agree that deleting directly in Quality and Prod is not good way and not recommeded.
    I have not tried and deleted.But if the system is configured in such a way  that if it doesnt ask for a request
    then i feel you have no option.
    If any object is deleted then you must have the deletion image collected into request at the same point when you are deleting.Because later when we go to transport connection we wont find the object itself.
    What i think from your point as you said you have done earlier  is you must have any open request regrding this query and when this query is deleted , the deletion image is also included in the same request.
    So go to se03 and give your deleted query name and check all the requests.
    Check in the requests when the deletion image is captured or not. we might be knowing that this is cpatured.
    Regards
    vamsi
    Edited by: vamsi talluri on Nov 9, 2010 9:14 PM

  • Log for Addition/Deletion of object in a Transport Request

    Dear Friends,
    Recently I had a issue where I tried deleting an object from a transport request and I got the message that object is deleted successfully.
    But when the transport was imported then it failed with Sy-subrc 8 because of the same object in transport.  The reason for the same could be :
    1.) Either the object was not deleted from the transport request.
    2.) Or Some one else added the same object again in the request.
    I want to read the log of this transport in such a way that I see when a object has been added/deleted from a transport request along with SAP User ID of the person doing it.
    Is this possible ? If so kindly share the steps with me.
    Thanks a Lot for your kind help!!! This is very important for me....
    Regards,
    Lalit

    Hello Lalit
    I hope nothing of that sort is available as the transport requests will again have tasks under them.
    The changes done to  the task will have to be tracked in that case but SAP doesn't have that task change logging as far as I know.
    All E0* tables relates to transports and objects under these transports none of them have logs on this nor even any transactions which allow user to edit the transport object.
    You get an action log which provides who created it and who releaed them.
    But if you configure CharM on Solution manager I hope you can track each changes.
    Regards
    Vivek

  • Error in FM DDIF_NAMETAB_GET when deleting BI objects via transport request

    Dear all,
    when importing a transport request in which several types of BI objects are deleted (Infocubes, DSO's, transformations, routines, DTP's, query elements, infosets, process chains). The import terminates only when transporting from acceptance to production with return code 12 due to an uncaught exception:
    Transporting from development to acceptance did not raise this exception.
    The ST22 dump (see below) refers in the "contents of system fields" section to a DSO, and to post-import activities. The DSO and the associated tables could not be found (rsa1 & se16), since they are deleted as desired.
    Some of the relevant notes that I have found do refer to DSO related problems, but they all indicate to install SP19 which we already have installed (BW 7.0 Patch Level 23)
    Could you please assist in pointing out potential solutions based on the information from the ST22 Runtime Error below?
    Kind regards,
    PJ
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                CX_RS_PROGRAM_ERROR
    Date and Time          08.02.2011 10:48:14
    Short text
        An exception occurred that was not caught.
    What happened?
        The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
        along the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
        'CL_RSDD_DS====================CP' has to be
        terminated.
    Error analysis
        An exception occurred which is explained in detail below.
        The exception, which is assigned to class 'CX_RS_PROGRAM_ERROR', was not caught
        and therefore caused a runtime error.
        The reason for the exception is:
        Error in BW: Error in DDIF_NAMETAB_GET
    How to correct the error
        If the error occurs in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "UNCAUGHT_EXCEPTION" "CX_RS_PROGRAM_ERROR"
        "CL_RSDD_DS====================CP" or "CL_RSDD_DS====================CM001"
        "APPEND_DS_TEC_FIELDS"
    System environment
        SAP-Release 700
        Application server... "dp1ci"
        Network address...... "<removed>"
        Operating system..... "HP-UX"
        Release.............. "B.11.23";
        Hardware type........ "ia64"
        Character length.... 16 Bits
        Pointer length....... 64 Bits
        Work process number.. 45
        Shortdump setting.... "full"
        Database server... "spisap02"
        Database type..... "ORACLE"
        Database name..... "DP1"
        Database user ID.. "SAPBIW"
        Terminal................. " "
        Char.set.... "C"
        SAP kernel....... 700
        created (date)... "Dec 14 2009 20:47:35"
        create on........ "HP-UX B.11.23 U ia64"
        Database version. "OCI_102 (10.2.0.1.0) "
        Patch level. 236
        Patch text.. " "
        Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
        SAP database version. 700
        Operating system..... "HP-UX B.11";
        Memory consumption
        Roll.... 5979936
        EM...... 0
        Heap.... 1459888
        Page.... 40960
        MM Used. 6988880
        MM Free. 415648
    User and Transaction
        Client.............. 000
        User................ "DDIC"
        Language key........ "E"
        Transaction......... " "
        Transactions ID..... "4D5111661004210BE10000000AFA2502"
        Program............. "CL_RSDD_DS====================CP"
        Screen.............. "SAPMSSY0 1000"
        Screen line......... 6
    Information on where terminated
        Termination occurred in the ABAP program "CL_RSDD_DS====================CP" -
         in "APPEND_DS_TEC_FIELDS".
        The main program was "RDDEXECU ".
        In the source code you have the termination point in line 61
        of the (Include) program "CL_RSDD_DS====================CM001".
        The program "CL_RSDD_DS====================CP" was started as a background job.
        Job Name....... "RDDEXECL"
        Job Initiator.. "DDIC"
        Job Number..... 10475900
    Source Code Extract
    Line  SourceCde
       31         RAISE EXCEPTION TYPE cx_rs_program_error
       32           EXPORTING
       33             text = 'Invalid DSO subtype'.                   "#EC NOTEXT
       34     ENDCASE.
       35
       36 *   get table name from DDIC
       37     CALL METHOD cl_rsd_odso=>get_tablnm
       38       EXPORTING
       39         i_odsobject = n_infoprov
       40         i_tabt      = l_tab
       41       IMPORTING
       42         e_tablnm    = l_tablnm
       43       EXCEPTIONS
       44         OTHERS      = 1.
       45
       46     IF sy-subrc <> 0.
       47       RAISE EXCEPTION TYPE cx_rs_program_error
       48         EXPORTING
       49           text = 'Error in CL_RSD_ODSO=>get_Tablnm'.        "#EC NOTEXT
       50     ENDIF.
       51
       52     CALL FUNCTION 'DDIF_NAMETAB_GET'
       53       EXPORTING
       54         tabname   = l_tablnm
       55       TABLES
       56         dfies_tab = l_t_comp
       57       EXCEPTIONS
       58         not_found = 1
       59         OTHERS    = 2.
       60     IF sy-subrc <> 0.
    >>>>>       RAISE EXCEPTION TYPE cx_rs_program_error
       62         EXPORTING
       63           text = 'Error in DDIF_NAMETAB_GET'.        "#EC NOTEXT
       64     ENDIF.
       65
       66
       67   ELSE.
       68 *   model table only needed for standard datastore objects, for
       69 *   write optimized DSOs target table is a changelog that is fully described by
       70 *   dta_pro (infoobjects)
       71     CHECK n_s_dta-odsotype = rsdod_c_type-standard.
       72
       73 *   get model table fields to add
       74     CALL METHOD cl_rsd_odso=>get_mod_tab
       75       IMPORTING
       76         e_mod_fld_ur = l_t_comp.
       77   ENDIF.
       78
       79 * according to T.B. ( 13.04.2007) the correct position is
       80 * not needed in the D version
    Contents of system fields
    Name     Val.
    SY-SUBRC 0
    SY-INDEX 0
    SY-TABIX 1
    SY-DBCNT 1
    SY-FDPOS 0
    SY-LSIND 0
    SY-PAGNO 0
    SY-LINNO 1
    SY-COLNO 1
    SY-PFKEY
    SY-UCOMM
    SY-TITLE Execute Post-Import Methods and XPRAs for Transport Request
    SY-MSGTY E
    SY-MSGID DA
    SY-MSGNO 300
    SY-MSGV1 /BIC/AV_AMOFCB40
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO 0
    SY-DATUM 20110208
    SY-UZEIT 104759
    SY-XPROG SAPLSYST
    SY-XFORM SYSTEM_HOOK_OPEN_DATASET

    Hi All
    We are also experiencing this same error when transporting deletions of multiple objects.
    Although the transport was cancelled in the destination system (production) it appears to have largely deleted all objects successfully except for DSOs.
    The DSOs still appear in the table RSDODSO (via SE11) but are not visible anywhere else.  When you try to view the DSO via RSDODS a warning appears saying "DataStore object to be deleted by transport -> delete only allowed".  If you try to delete them in this transaction the same ABAP runtime error as the transport appears.
    Any assistance would be greatly appreciated!
    Regards
    David

  • How to delete the entries from the transport request

    i need to delete the entries programatically from the transport request for all the entries which is exists in the package for the tables e070 and e071.

    Hi,
    I think you need to have authorization for that thru auth group SA.
    One more thing is where ever its created like source client only you can do if u have authorization.
    Regds
    Sivaparvathi
    Please reward points if helpful...

  • How to delete the Transport Request?

    Hi all,
       I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
    Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
    Regards,
    Nagesh Ganisetti.

    I am not sure I understand.
    You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
    Transports will be configured in all the systems in your landscape (including production).
    Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
    Added -
    I now see that the request is in production.
    Igore the above in that case.
    If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
    When you try to delete, what message do you get?
    Message was edited by: Ajay Das

  • Problem while deleting objects in Transport request

    Hi  Guys,
    I am working on some object .It has some tables ,RFC's etc
    If I make changes to some of the objects the next day aging the same object is attached with the same name in the Transport Request.Also if i try to delete one out of it,I get the folllowing message & I am unable to delete it.Please guide on both.
    Message: "Object entry exists more than once. Sort and compress first"
    1. why same object gets attached to the request again?
    2.How to delete the duplicates entries of the object

    Hi,
    If more than one user has worked on the same object, then it would be included in the TR twice.
    Right click & select SORT COMPRESS, then try to delete.
    Best regards,
    Prashant

  • Unable to delete Transport Request which contain locked objects

    Hi all,
    I need to delete  some unusable transport requests but as they contain locked objects, it's not possible to delete them. Release operation is just allowed. After releasing these transport requests, I can not find them any more in queue. Please help to find these  transport requests which are released and also provide a solution to delete instead of releasing them.
    Thanks in advance,
    Sanaz.

    Hi,
    Thank you for the reply.
    1. What do you mean by transport request , Shipment Request, Shipment Order or Tour.
    A. I mean requests which can be transported between SAP Systems using TMS (Transport Management System).
    2. What are the objects which has been locked and due to that you are facing this problem.
    A. There are diffrent object types. For examle some customizing have booen done or SAP Note correction has been implemented, ... Therefore some objects have been locked due to these operations
    3. Let's say if it's an freight Unit, then Pls confirm that System dump / error is not the cause for this.
    A. I have no idea about "Freight Unit".
    Thanks,
    Sanaz.

Maybe you are looking for