Transport Request for a Bex query ?

HI  all ,
i have a requirement that , i have a query which is in producton first, &  not available in development  .  we need to do some changes on it .
for this we have copied from producton to  DEV .
when i am  trying to changes it is saying  that , "Bex transport request is not availbele or not suitable :
or choose an existing request .
Plz suggest me how to rectify this .
regards ,
Srinivas .

Dear Srinivas,
I wanted to repeat the normal rules for how we must use the BEx transport in BW.
This is a special transport that is always used in development. All query changes get written there - you don't choose your transport in the normal fashion. But this gives a problem - we have no control over what is in that transport. Therefore we never release it.
Instead the process is to create a new transport and include your new query in it. You often find that part of the query is in the BEx transport, and you must delete it from that transport.
It doesn't matter whether you delete just your query, or just delete all the contents of the BEx transport - but do not delete the transport itself, and do not release it either.
Deleting everything in the transport is very fast and simple - if you do it this way. In se01, click on the 'tools' icon (fourth icon). then choose Unlock Objects (Expert Tool). Run it twice, first the task, then the request. Then return to se01 and all the objects in the transport are unlocked and can be deleted in one go.
Thanks-RK

Similar Messages

  • Transport Request for Jump Queries

    Hi,
    When i try to create a transport request for the jump queries using the transport connection button in rsbbs tcode i am able to create only for the sender query but
    my jump query has one sender and two receiver queries.
    Could anyone of you tell me the process of creating a transport request for the jump query,
    regards,
    vamsi

    Hi,
    the request for the jump queries contains for sure the jump queries. Edit the request and double click on the entries and you will see that it transports the contents of tables rsbbsquery, rsbbsqrydir, rsbbsqrymapping... for the key arguments <your sender query> or <your sender cube>. Those table entries will contain also the information about the receivers.
    regards
    Siggi
    Message was edited by:
            Siegfried Szameitat

  • No request has been set up as the standard transport request for BEx object

    Hi gurus,
    I have this error in a query . Have someone any ideea what is this?
    Thanks,
    Ramona

    Hi,
    Before you create a query you have to assign a global request to Bex application.
    To do this goto Transport connection of RSA1, In the tool bar you will see a icon Bex (Create transport request for Bex). Assign a request for it. After doin so, you error will be resolved.
    -- Selva

  • Transport request for Report

    Dear Experts,
    I have built a query/ report (in Development System) in Bex. I need to move that report to test system. How to do that? I haven't got any transport request for that. Do i need to create a transport request for that? Could you  give me step by step what to do and how to do, please?
    Thanks,
    Riya

    Riya,
    Please don't ask the same question in different threads, esp as you have not closed out a lot of your previous threads:
    urget please moving to testing system

  • Transport request for BW queries and roles.

    Hi All,
    we need to craete 20 bw queries on 4 multiproviders. We need to save 18 queries as workbooks in one role and the other 2 queries in other role.  Both the roles and queries does not exist and will be created in Developement environment.
    We just want to know how we can transport them in the quality environment. What is the right method to transport them.
    Can we transport all the object queries, workbooks and roles in number of transport requests so that if few queries or workbooks needs any changes then we do not have to transport all objects just the request which includes the changed objects.
    Thanks & Kind Regards,
    Hardeep

    Thanks a lot for all of you for your quick response. But i still have questions.
    If we create one transport for roles and one transport for each query then we will be having 21 transport requests. But the transport request on same multiprovider can lock the clacuated key figures and restricted key figures, if they are present in more than one query, it means they will be present in more than one transport requests, so they can be locked and trasport request will be failed.
    If i just create one transport request for all the objects roles, quaries & workbooks it will not loack any object, and transport request will not fail. But i have to transport all the objects again if i need to change one of the queries.
    Please let me know if there is a method that i can divide my queries as per multiprovider and can create transport requests as per multiprovider so that we can not lock calculated keyfigures and restricted key figures. Is workbooks can be published in the role in the same transport request. If it is and if in more than one transport request we are publishing the different workbooks to the same role, will it lock the role.

  • Creating transport request for SQVI

    Hi ABAP Guru's,
    I have created a query using SQVI. How can I create transport request for it because I want to transport that to QA.
    Thanks.
    Regards,
    Tushar.

    Hi Tushar,
    You cannot transport The query made via  SQVI is only intended for individual use/reporting purpose.
    To transport the query by converting it to SAP Query  source of data tobe converted to an Infoset.
    SQVI-> SAP QUERY
    QUERY(MENU) -> CONVERT QUICKVIEWS
    Assign Infoset and Area to the Query and then you can transport.
    Hope this may help you.
    Regards,
    Lanka

  • 2 Transport Request for a report

    Hi Experts,
    I am having 2 Transport requests for the same Z report (classical report).
    I have transported both of them to quality on after another with different modifications in both of them.
    Now i want to transport it to Production.
    I want to know do i need to transport both the requests or do i need to transport only the last
    Transport request to production ?
    Please help <removed by moderator>.
    Edited by: Thomas Zloch on Jun 16, 2011 10:33 AM

    Hi,
    As per SAP Best practice there shouldnt be any floating TRs in Quality system which are not moved to Production. Which means all the transports which move from Dev to Quality should be moved to Production. If there is any unwanted change which is moved due to a TR, then a correction request should be created & released to subsequent systems.
    Hence in your case move both the TRs in the same sequence to Production.
    Thanks,
    Best regards,
    Prashant

  • How to create transport request for standard web template

    hi all
    can any one tell me the step by step procedure to create transport request for standard template?
    thanks
    shalini

    Business Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
    Message was edited by:
            Jerome

  • How to create transport request for standard text created using SO10.

    Hi,
    How to create transport request for standard text created using SO10?
    Regards
    Ramakrishna L

    Hi,
    For the Standard text created in SO10,
    please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
    Double click on ADRS or ST or what ever your type of text->
    Enter your standard text name
    Click on transport button->SHIFT+f6-> It will ask you for a transport request.
    Best regards,
    Siva

  • How to assign transport request for Dynamic selection in SE36

    Hi Friends,
    Please guide me how to transport or assign a request for the changes made in BRF selecion view.
    I have assigned and added BKPF-XREF1_HD field for FB03 transaction. Its working fine as per user requirement.
    I am facing probelm to assing a transport request for that. I didn't find any transport menu in se36.
    So please provide me how to assign a TR which need to import into Production client.
    If I have to assign or create a program (standard), then please provide me the program name.
    Please reply.
    Thanks & Regards
    Sankar.
    Edited by: sankar babu on Jul 29, 2010 12:27 PM

    Moderator message - Cross post locked
    Total Questions:  283 (131 unresolved)
    Please also close your old posts and assign po1nts to helpful answers.
    Rob
    Edited by: Rob Burbank on Jul 29, 2010 9:50 AM

  • Need transaction code for opening Bex query designer?

    Hi ALL,
      Can anyone help me with the transaction code for opening Bex query designer?
      Like RRMX for Bex Analyzer similarly i want for Bex query designer.
    Thanks & Regards
    Sameer Khan

    THERE IS NO TCODE FOR QUERY DESIGNER. BUT THERE IS AN ALTERNATIVE..
    OPEN BEX ANALYSER THROUGH RRMX
    OPEN A QUERY
    CLICK ON TOOLS-> EDIT QUERY
    THIS OPENS QUERY DESIGNER AND YOU CAN USE IT NORMALLY..

  • How do I AUTOMATICALLY generate Transport request for a Z table data?

    Hello friends,
    I would like to automatically create/generate a transport request for a Z table every time I change, add or delete data in that table.
    Currently, every time I modify data in the Z table, I need to go and manually create a transport request and then indicate keys for the row(s) which were modified. I find this a tedious, time consuming, and error prone process.
    So I would like to automate this process. That is to say, the transport request is generated for the rows that I modified. The same way as is done when you change a program. It automatically prompts you for a transport request thingy.
    Any ideas?
    Your help is greatly appreciated.

    You need to make the table contents transportable by creating a "table maintenance generator" in SE11 under Utilities -> Table maintenance generator.
    In that screen for the section "Dialog data transport Details" the "Standard Recording Routine" option should be selected.
    Then only will the system ask for Transport request when entering data through the generated maintenance view in SM30.
    Also change the "delivery class' in the table attributes to 'C' - Customizing table

  • Transport request for the deleted dso

    Hi,
    i had deleted the dso in development and not captured the transport request. now how can i generate the transport request for the deleted dso to move for production.
    Regards
    Ram
    Edited by: ramsapconsultant on Mar 9, 2011 7:40 AM

    Hi Ram,
    you can try creating DSO with same name in Dev system. Capture it in transport req.
    Now delete that DSO and capture it in deletion Transport Request.
    I am not 100% sure if this will work but you can give it a try.
    Regards,
    Hardik

  • Transport Request for Scripts

    Hi Gurus,
    How can I know the Transport Request for my Script form , other than SE09 and SE10.
    Thanks in Advance.
    Thanks and Regards
    Siri......

    In Se16 tcode: take table:E071
    give the following values and execute.
    PGMID                            R3TR             
    OBJECT                          FORM             
    OBJ_NAME                   "ur sapscript form name                  
    you will get the transport request related to this form.

  • New OLAP connection for each BEx query?

    Hi,
    I am wondering whether it's really necessary to create for each BEx query a new OLAP connection in BO 4.0.
    This is the BICS connection as far as I know. But this would result in a lot of OLAP connections...
    Thanks!

    One OLAP connection is enough for one BW system.
    You can also dedicate a OLAP connection to one query if needed.

Maybe you are looking for

  • Apple ID Security questions. Help me please

    Okay so I have had this email address for about 2-3 years now and it's been my apple email since then. I have added iTunes codes to it every so often but just yesterday I bought one and decided to redeem it on my iPad. It was successfully redeemed an

  • Need a download scheduler that works over a number of days

    I have tried Download Plan. Either I don't know how to use it or it doesn't work properly. Facts: 1) Because of various factors I have to download between 00:00 and 08:00 my time. 2) If I am lucky I get 3 GB in that time. 3) Sometimes I need a file t

  • AVoutput on iphone 4

    I've just purchased an AV cable for my iPhone 4. It's the composite one. However, I'm having problems with it. Basically, when the iphone is connected to my TV and I start a video in iPod or slideshow, the picture flashes up briefly and then the scre

  • Flash Help Index search hangs on "a"

    If you use the keyword search on the Index tab of a FlashHelp site (RoboHelp6), it works fine until you try to return to the "a" part of the list. Typing "a" hangs up the search and you have to refresh the page for anything to work again. Here's the

  • HT1338 how to download/play games on Macbook Pro

    sa