Transport request for Set Control Parameters for Actual Data.

Hi Viewers,
I am unable to create the transport request for the below settings
Controlling->Profit Center Accounting->Basic Settings->Controlling Area Settings->Activate Direct Postings->Set Control Parameters for Actual Data.
Is it possible to move the request through transport request or do we need to create the settings directly in the target system.
Thanks
Aswin.

Hi,
Please read the IMG help at the given path. There are certain profit center accounting settings which cannot be transported directly from the same path, but there is another node in SPRO path for doing this. If possible I will try to locate the path but I am not sure I can post it immediately as I am not having system handy.
thanks,
Kumar

Similar Messages

Transporting Control Parameters for Actual Data in Profit Center Accounting

Hi Friends
Transport type of control parameters for actual data in Profit Center Accounting has been mentioned as Manual, when I try to manually create the Transport Request the Transport option in the Menu is disabled. Is there any other way to transport this configuration.
Regards
P Rajan

Hi
I think the settings that you are mentioning is through transaction 1KEF please clarify. Else elaborate where you have set the transport type manual.
Transport request are the domain of Basis people and is meant for transport from one client to another like quality to production.
Anand

Travel management-- Control Parameters for Travel Expenses-- Define global

We have setup provision variants for:
India, UAE, Africa (since travel expenses in these countries need to be settled in the local currency).
For each of the above variants, we have done the following settings in IMG node:
Travel management-->Control Parameters for Travel Expenses --> Define global setting
I have selected the respective country for the "Country grouping" field. i.e. for India Variant, it is set to India and similarly for UAE etc.
Is this correct? What is the impact if in India variant this field ("Country grouping) is set to UAE?

hi
the settings which you set is right.
you will have inconsistency between the settings you made in the other areas.

Control parameters for data transfer

Hi!
There are no data in SBIW source system - General Settings - Maintain Control Parameters for Data Transfer.
How does it have an influence on loading data?

Hi,
Maximum size of a data packet in kilo bytes
The individual records are sent in packages of varying sizes in the data transfer to the Business Information Warehouse. Using these parameters you determine the maximum size of such a package and therefore how much of the main memory may be used for the creation of the data package. SAP recommends a data package size between 10 and 50 MB.
Frequency with which status Idocs are sent
With this frequency you establish how many data IDocs should be sent in an Info IDoc.
Standard settings
Frequency 1 means, for example, that there is an Info IDoc for every data IDoc. In general, you should choose a frequency between 5 and 10 but not greater than 20.
Recommendation
The larger the packet size for a data IDoc, the smaller you should set the frequency. By doing this, you make it possible to get information on the respective data load status in relatively short time periods when uploading data.
Maximum number of parallel processes for data transfer
Select a number greater than 0.
Parallel processes can be set from the SAP core release 3.1I onwards.
These parameters are, therefore, ignored in releases before 3.1I.
However, there is a possibility of importing the SAP release 3.1I into earlier releases.
The more parallel processes that can run the better the performance of your system will be. However, you must bear in mind the number of available dialog processes here.
It will be fine and more effective if you use sap recomended values in those respective fields

Status control table - 'Perform update for status control table for cube '

Hello Experts,
While loading data to DSO, I am getting this message - 'Perform update for status control table for cube Z3MLQUA'.
What is status control table ? and can I have some inputs as to how to solve this issue
Regards,
arjun

Hi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap

Problem in setting the parameters for an OASingleSelectionBean

Hi,
I have created an advanced table, for which I have to allow single selection or mutliple selection according to my requirements ie dynamically. So, for single selection, I have created a OASingleSelectionBean dynamically and add this to my advanced table bean.
I also want to set Action for the single selection option. I have set the action using
setPrimaryClientAction() which takes an argument of oracle.cabo.ui.action.FirePartialAction class. Now I also want to pass certain parameters when the single selection event happens.
For that, I have taken an object of FirePartialAction class and but using the FirePartialAction class .setParameters(oracle.cabo.ui.collection.Parameter[]) function. I am setting the parameters using
Parameter class object.setKey
Parameter class object.setValue
But my problem is that I want the value for the parameters at runtime, for which I intend to use SPEL. But I am not able to use SPEL using the setValue method.
So it goes like this in short:
OAAdvancedTableBean.setTableSelection(OASingleSelectionBean)
OASingleSelectionBean.setPrimaryClientAction(FirePartialAction)
FirePartialAction.setParameters(Parameter[])
Parameters.setKey(String)
Parameters.setValue(String) --- In case of value I want to give SPEL as an argument as I get the value at rutime
Is that any other way in which I can set the value for the parameters using SPEL?

Hi,
I got ur point.
Although i have never tried.........Can you try using method
Parameters.setValueBinding(new OADataBoundValueViewObject(<single selectionbean>,<vo attr>))
In this way without the use of SPEL, you will be able to achieve the functionality!
Try this and get back to me!
--Mukul
Message was edited by:
Mukul Gupta

Problem with XI objects transport - Unable to set import lock for SWC

Hi guys!
I try to import objects from dev to qa but I'm getting following error:
Unable to set import lock for software component version SWC_xxxx , 1.0 of company.com because user OSALUDEW is currently importing data to this component Try again once user OSALUDEW has finished importing data
The problem is, I'm not importing anything.. Well, I try to import, but something is hanging there from previous time.
How to solve this issue?
Thank you!
Olain

Well,
I closed all the applications - repositories (dev, qa), directories (dev, qa), then started qa repository again and imported the objects successfully
....hmmm....
Olian

How to set single parameters for two tables?

SELECT GM.GRNNO,GM.GRNDATE,SUM(GS.APPROVED),SM.ISSUENO,SM.ISSUEDATE,GS.ITEMCODE,SUM(SS.ISSUEDQTY)
FROM IMS_GRNM GM,IMS_GRNS GS, IMS_ISSUEM SM, IMS_ISSUES SS
WHERE GM.GRNMSERIAL=GS.GRNSSERIAL
AND SM.ISSUEMSERIAL=SS.ISSUESSERIAL
AND GM.POSTED='T'
AND SM.POSTED='T'
AND GS.ITEMCODE=SS.ITEMCODE
AND GS.ITEMCODE='01-01-02-019'
AND *******
GROUP BY GM.GRNNO,SM.ISSUENO,GM.GRNDATE,SM.ISSUEDATE,
GS.ITEMCODE ORDER BY GM.GRNDATE,SM.ISSUEDATE;
******* here i have to select the data from both the tables between two parameters named :P_1 and :P_2.
the date column in IMS_GRNM is named as GRNDATE.
the date column in IMS_ISSUEM is named as ISSUEDATE.
how to set such parameters???

I think all you need is
Where table1.column1 between :p1 and :p2
and table2.column2 between :p1 and :p2

What are the controlling parameters for a MRP run?

Hello! SAP gurus,
Can any one explain me about Control Parameters related to MRP Run.
Thank you,

Please look at the following posts
mrp
MRP Control parameters(MD02)-Regarding.
Regards,
Harish

Issue when transport request of Text Control

Dear Gurus,
I have some problem when modified Text controls.
Requirement
My customer want to copy item text from Quotation which is use access sequence 9000 to item text in Sale Order
What I do.
1. I go to SPRO -> Sale and Distubution -> Basic Function -> Text Control -> Define Access Sequences For Deermining Texts -> Sales Document -> Item -> Textproceture -> Text ID's in procedure of Sale order Item
2. I input Access squence 9000 to sepecific Text ID and ticked "Refer/Duplicate"
3. I save and I get the Transport Request
4. I create sale order reference Quotation and the result is system copy text.
5. Then, I transport request to Simulation Server.
6. I create sale order reference Quotation but this time system does not copy text
I want to know why problem is occurs. if you have reference document about this issue please tell me.

Hi,
Run the program 'RSTXTRAN' using transaction SE38 and attach the Text object to your TR.
Last time I faced the same problem.
Everything gets transported except Text object.
Hope it will be useful to u.
Revert if not resolved.
Regards
Amit
Edited by: Amit Gupta on May 14, 2009 7:31 AM

I have two Apple IDs, and this is causing problems with syncing via iCloud. How do I move everything to one ID? All advice is for setting up, not for after it's already set up.

My problem is that I have been a Mobile Me user for the past couple of years, and because of that a second Apple ID was generated in addition to the one I've been using for years. When iCloud was introduced last fall I did everything I was supposed to in setting it up, but it is evident that the syncing is not working as it should. In checking, I am certain this is because I now have two active Apple IDs. I would assume this is a common issue with all who were/are Mobile Me users.
The online help says you can't merge two IDs. Okay. What I want to do is to get rid of the Moble Me ID and only use my regular Apple ID. But the help on that issue seems to only give instructions for setting up the iCloud account. It seems that when I go into my iCloud accounts, both on my iPhone and my Mac, I can view the ID but there is no way to change them to another ID or to eliminate the account.
Please help. I am a long-time Apple user and this really should be a fairly simple matter to take care of, but this is one issue where the normally user-friendly Apple way of life is giving me fits. Thanks.

I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.

Unable to release transport request because of control program tp

I have create a customized transaction type as a copy of urgent correction SDHF. I am not able to release the transport requests using the action in the toolbox 'Release Transport Request' and I obtain the following error in the log:
could not start transport control program tp
But if I directly execute the task 'Release Transport Request' in the task list, it works.
Another strange thing is that at the beginning both ways worked, but after some days I started to have this problem.
Thanks
Antonello

I did not find any note about this error.
Someone can help me?
Thanks.
Antonello

Best approach for setting up iCloud for a child

Hi,
I have bought my son an iPad Air for his birthday. We already have an iMac in the house which is shared by us all, with each person having their own login. My original question was going to be how I can create an iCloud login for him. I tried createing one yesterday but to create the iCloud login I needed an apple id but it seems he is too young to have his own applie id. Is it possible for me to have the one Apple id which we use for purchases but then for myself and my son to have seperate iCloud logins?
But now that I think about this more I am thinklng of creating a seperate apple id for him (maybe in my name) because I do not necessarily want him to access some of te movies and songs I have purchased from iTunes because they are not appropriate for a child.
So what is the typical setup for app id and icloud accounts for a familly?
Thanks
Andy

Previously, before introduction of family sharing feature - I created for my kids apple id's under my name and with my information - since Apple requires account creator/holder to be over 13. Now with introduction of family sharing Apple policy changed a bit, but I find that they created system that still needs some kinks to be worked out. My personal recommendation to proceed just like you were thinking and make adjustments as Apple perfects their policies.
Practically you will have your son's phone sign in to his id under
Settings messages
Settings facetime
Settings icloud
You will share id on
Settings itunes and app store
You will disable auto downloads on your and your son's phone
and most importantly you will have to limit your exposure to get hit by your son using your credit card. As well as control his download options in Settings -General - restrictions - where you can disable download of things by age or content type.

Need insight for setting up permissions for sharing an external hd via OS X 10.6?

Hello intelligent lifeforms,
My supervisor and friend passed away a little over a year ago, and I am now trying to fill his shoes as the networking guru and could use some assistance. I'm trying to share an external hard drive that is connected to my Mac Pro OS X 10.6 workstation with a Mac Pro OS X 10.4 workstation user. I've tried setting up a Sharing Only account in my System Preferences-Accounts for the 10.4 user, and under System Preference-Sharing I turned File Sharing: On, added the Shared Folder, added the User and set priveleges as "Read Only." My intentions are for the 10.4 user to only be able to copy files from the external hard drive so as to protect the archived files being stored there from being tampered with. However, there is a User group listed as "Everyone" that I can't remove and believe it is taking precedence over the 10.4 account that I setup. I do not know where this Everyone group originated from but believe it to be some kind of default group and a major obstacle.
When the 10.4 user copies a folder from the external hd to his workstation and later copies it to a volume on our Xserve OS X 10.2 the folder shows that I do not have privileges to do anything to the folder (there is a red circle with a minus sign in it on the folder icon). Eventually, I am to backup these files to the external hd where lies my dilemma.
The volume on the Xserve being copied to is setup under Workgroup Manger-Sharing-Share Points-General: "Share this item and its contents" IS checked, Owner: admin-Read & Write, Group: staff-Read & Write (where said user has been added to the staff group), Everyone: none (I do not think the Everyone group listed on the server has anything to do with the Everyone group on my machine?), Enable disk quotas on this volume is NOT checked.
My tests show that the permissions are being carried over from the external hd Everyone group (Read Only) because even when the 10.4 user's permissions are set to Read & Write in System Preferences-Sharing-File Sharing-Users the folder still shows to be Read Only when it's copied. I've even tried setting his Desktop privileges to Read & Write hoping that when he copies the folder the permissions would be overwritten. Unfortunately, the only way to give me priveleges is for the 10.4 user to change them manually through Get Info from his workstation. This is counterproductive to the workflow I'm trying to establish. I've tried wrapping my brain around the flowchart of coordinating permissions/privileges between the different machines but to no success.
Also, a note to add is I've observed a User: Firebird Database that is listed under System Preferences-Sharing on both of our workstations. It cannot be removed either and I do not know where it is originating from.
Is there anyone out there that has any insight to this situation?
Perplexed,
carl_prepress

"Everyone" is not a Group.
Every file has underlying Access settings for System, Owner, Group, and World.
Access settings for Everyone mean everyone-else that is not explicitly mentioned in the other settings. It is the same as the Unix "World".
If you set the Priviledges for a file to Everyone=Read, then any user with any credentials can read it.
The User Categories Owner, Group, and Everyone
You can assign standard POSIX access permissions separately to three categories of users:
Owner—A user who creates a new item (file or folder) on the file server is its owner and automatically has Read & Write permissions for that folder. By default, the owner of an item and the server administrator are the only users who can change its access privileges (allow a group or everyone to use the item). The administrator can also transfer ownership of the shared item to another user.
Note: When you copy an item to a drop box on an Apple file server, ownership of the item doesn’t change, but only the owner of the drop box or root has access to its contents.
Group—You can put users who need the same access to files and folders into group accounts. Only one group can be assigned access permissions to a shared item. For more information on creating groups, see the user management guide.
Everyone—Everyone is any user who can log in to the file server: registered users and guests. Hierarchy of Permissions
If a user is included in more than one category of users, each of which has different permissions, these rules apply:
• GrouppermissionsoverrideEveryonepermissions.
• OwnerpermissionsoverrideGrouppermissions.
For example, when a user is both the owner of a shared item and a member of the group assigned to it, the user has the permissions assigned to the owner.

Setting control parameters programmatically - using variables...

Please excue typos - I lost my glasses the other day and I'm waiting on a new pair to come in.
I need to be able to change the 'editable' and 'enabled' properties on a variety of controls programmatically. I'm adding 'after the fact' Role support to an application and the customer has asked for a way to change the visibility and editability on specific controls.
I've created a role management system where the controls are stored in an XML file and the application administrator has the ability to define roles by changing what a user (belonging to a Role) can see and change.
based on:
<filename canAccess="false" fileName="canSearch.mxml" friendlyName="Claim Search">
<controls>
    <control controlID="control ID" controlLabel="control ID" controlType="type" editable="false" visible="false"/>
    <control controlID="control ID" controlLabel="control ID" controlType="type" editable="false" visible="false"/>
</controls>
</filename>
I could:
if(controlType == whatever)
     display based on xml information
but I'd have to add new code for each additional control type that we may add later..
what I'd like to do is:
var controlID:controlType;
controlID.editable = controls.control.@editable;
but of course,
"Type was not found or type was not a compile-time constant: controlType"
Is there a way to do this entirely programmatically?

This is the code I'm testing:
for each(var control:XML in roleInfo.role.(name == rolesA[0]).filename.(@fileName == calledFileName).controls.control)
     var tempControlID:String = control.@controlID;
     this[tempControlID].enabled = control.@enabled;
     this[tempControlID].editable = control.@visible;
against the following XML structure:
<roles>
<role>
    <name>Claims Viewer</name>
    <description>This User can only view claims.</description>
    <filename canAccess="false" fileName="canSearch.mxml" friendlyName="Claim Search">
      <controls>
        <control controlID="txtTIN" controlLabel="TIN:" controlType="Text Input" editable="true" visible="true"/>
        <control controlID="txtNPI" controlLabel="NPI:" controlType="Text Input" editable="true" visible="true"/>
      </controls>
    </filename>
    <filename canAccess="true" fileName="canNewClaim.mxml" friendlyName="New Claim">
      <controls>
         <control controlID="txtPatientID" controlLabel="Patient ID:" controlType="Text Input" editable="true" visible="true"/>
         <control controlID="txtSubscribe" controlLabel="Subscriber ID:" controlType="Text Input" editable="true" visible="true"/>
         <control controlID="txiDOB" controlLabel="Patient DOB:" controlType="Text Input" editable="true" visible="true"/>
      </controls>
    </filename>
</role>
</roles>
The idea is to be able to change editable, enabled, and other properties such as 'includeInLayout' based on the role restrictions contained in the XML file.
I am hoping to be able to do this without having to resort to:
if(controlType == mxLabel)
apply settings
else ig(controlType == someOtherControl)
apply settings
(repeat until all control types are covered)
The problem is that not all controls use all, or even the same, properties e.g; <mx:Label> doesn't support 'editble' so evein this method may not be optimal. I was thinking to use a try-catch block with it to contain errors, but that sounds a little too 'brute-force'.
for each(var control:XML in roleInfo.role.(name == rolesA[0]).filename.(@fileName == calledFileName).controls.control)
     var tempControlID:String = control.@controlID;
     this[tempControlID].enabled = control.@enabled;
     try
       this[tempControlID].editable = control.@visible;
     catch(e:ErrorMessage)
          //handle 'editable' differently
Where rolesA[0] is the Claims role from the User database that we want to match to the applicable role in the XML file, and calledFileName is the name of the file we want to manage the controls for.
I am using an XSD to support the XML file, so I may change the XML structure to have appropriate controls for each control type, however that would make the page that supports modifying the XML very difficult to code (for me , at least)
On the boolean conversions, could I do this?
this[tempControlID].enabled = control.@enabled as Boolean;
Does this make any sense, or am I overcomplicating things?

Transport request for Set Control Parameters for Actual Data.

Similar Messages

Maybe you are looking for