Transport request from non-unicode to unicode

Hi
In our BW landscape we have Development and Production server.
Unfortunately the development server was installed on BW 3.5 with NonUnicode
and production on BW 3.5 with UNICODE option..
We inderstand the architecture change, but we are using only ENGLIGH language in our envn.. Do we still need to do a unicode conversion on our development server ??
I understand that as long as I am using single language & single codepage, I will be needing a unicode conversion
Kindy let me know your feedback..
Thanks & Regards
Madhu

Hi,
We are having a running landscape of non-unicode system.
Now, Another Landscape is being used by parent company of Unicode Systems. Now, All data, programs, objects are being configured on the parent company server. So, there is no chance to migrate non-unicode to unicode.
But, We have to apply all packages developed on Non-unicode system to Unicode System. I have released that request and copied data file and cofile into target developement System (Unicode) then imported on this Server.
Now, we are facing this problem (Above mentioned.). I think, there must be a solution for it conceptually.
Regards
Dharmendra

Similar Messages

Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
for example downloaded all co files and data files
control file: K900470.SAD and Data file: R900470.SAP from transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried to add in the import queues using TCODE: STMS and trying to import.
During import we get the below error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
End with rc : 16
Please help me on this
We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
Thanks & Regards
Murali Papana

Did you see that you tried to transport to an older release!! You should have expected such a result.
Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40.

Problem transporting Request from Development to Quality Assurance Server

Hi All,
I m facing a problem of Transporting requests from one System to other.
When adjusting the Request ,the error message reads as follows :
RFC system error in system/destination
[email protected]_HSE
Now,when I check the RFC Connection for [email protected]_HSE,,
i get the message :
" License Check required "
Please respond to this query urgently.....
Thanks in advance

Hi!
I think it's better to call SAP support, if you have problems with the licenses...
Maybe your company forget to pay their fees since a while
Regards
Tamá

Transport request from one server to another

Hi All, We have two servers AB1 and AB2. We would like to transport request from client 101 (AB1) to client 110(AB2). How do i make transport route between these two servers. Thanks, Sam

Hi Sam,
You need to configure Transport Management System between these two system by following Configuring TMS - Software Logistics - SAP Library and by considering below detailed steps:
1. After SAP Gui installed. (Development system is always domain controller.)
2. Logon to Client :000User: DDIC.Pwd: ******
3. Put a T-code (se06) in the command field
4. Click standard installation and click post installation (yes)
5. Put a T-code (STMS) in the command field and give a description then save it.
6. Click System overview push botten, click extras option from the menu and click Distribute and activate configuration. (Yes)
7. Back to the stms main screen and click Transport routes from the push botten
8. Click Configuration button from the Menu.
9. Click Distribute and activate from the configuration menu.
10. Now your sap system is activate in domain controller.
11. Now logon to QAS system.
12. Client: 000User: DDICPwd: ****
13. Put a T-code (se06). In the command field.
14. Click standard installation and click post installation (yes)
15. Put a T-code (STMS) in the command field.
16. Click other Configuration push butten in the bottom of appear screen.
17. Give information about development system.
18. Then save it. OK
19. Now QAS is waiting for include domain controller.
20. Logon to Development system.
21. Click system overview push butten.
22. Click sap system from the menu.
23. Select the QAS systems.
24. Click Approve butten from the sap system menu.
25. Now QAS is member system of domain Controller. (Development system)
26. Suppose if you want configuring Production also, following the same step in the QAS.
Also you can follow links SAP Basis Tutorials/ Training: Transport Management System ( TMS ) Configuration In SAP Step By Step With Snap Shots
Hope this will help you.
Regards,
Gaurav

To revert back a transport request from prd to dev server

hi experts
    how to revert back a transport request from prd server to
    dev server?
    a transport request has been wrongly transported
    and it has make major changes in production server,
   now we want to revert back that request , we know the   request no.
regards
pankaj

All you have to do is create an order of transport type "Transport of copies" in PRO.
I give you the steps to follow:
1. Go to SE01 and create a new order (remember the type "Transport of copies").
2. Enter the data of the order of transport that is going to come back.
3. Enter the target, here is where you asign the target system to carry the request.
4. Now just add the number of request to the new request you just created.
5. Finally released the request from this transaction.
6. Check on the queue of transport in DES, the request must appear there.
I hope you serve =)

How to transport requests from development to production server

hi gurus
i am new to SDN
can u pls give me detailed information how to transport requests from development server to production server?if possible give me screen shot documents
regards
surya

Hi
Transporting
There are help pages that discuss creation of transports.
In simple terms, you: create a transport package
add objects to the package export the package, plus optionally any related objects to a predefined folder/directory on the portal server into a file with an extension of .EPA copy the .EPA file to the import folder of your QA system and import it test the contents on the QA system copy the .EPA file to the import folder of your production system and import it Create a transport package file
Here is the step by step procedure to create a transport package:
For Export
1. Go to system administration, and click on transport?export.
2. In the middle pane, select the folder you want to export and right click on the Transport Package. 3. Fill in the General Properties i.e the name of the package, id and description. 4. And say finish and open the object for editing.
5. When the object has been opened then right click on the object you want to transport, and say "Add object to the Transport Package".
6. Check the checkbox of the item u have added and see the properties if it has been added properly. 7. Now click on the save button.
8. After the object is saved, click on the export button. 9. U will have an option to select where to store the .epa file which will be generated. U can overwrite an existing one by selecting the browse button, or store it with the generated name in the location it automatically generates. 10. Now Click on the Start Export button.
11. once the export is completed, it shows a report on how much time is taken to generate the .epa file. 12. Here there is an option for downloading the .epa file. Click on the link and download the file. This file is ready to be uploaded into any other EP Server.
For Import:
Pre-requisites: You have to copy the .epa file created while export into the local drive. Optionally, you have to manually copy the .epa file generated in the export function into the Import directory of the server ie. chooseFollow the steps below for importing a certain file. 1. Go to System Administration in the portal, and click on Transport?Import. 2. For the source of the package, Click on the radio button Server for the .epa file you have copied lately. Else, click on the radio button on client if you are operating in the client and select the .epa file you have stored on the local drive. 3. Now select the file from the browse option and click on Upload.
4. Now click on the import button. 5. Once the import process is finished, the report is shown. In the whole process, the par files are not included in the .epa files. For the par files to be included into the .epa files then we have to change the pcdStartup.properties file in the server. The property to be changed is Pcd.TransportApplication.Export.ExcludeObjectTypesAfterRuleProcessing: Keep this property's value as empty for enabling the par files to be uploaded into the .epa. You can check for this property in the portal in the following -System Administration-Support-Portal Content Directory-PCD Configuration.

Transport requests from dev to prod

Hello,
It's possible to transport requests from a BW developing system with
HP-UX IA 64 (with itanium processor) operating system, to a production
system with HP-UX 11i v1(with risc processors) operating system.
We installed BW 3.0 for developing on HP-UX IA 64 and BW 3.0 on HP-UX
11i v1.
Thank you,
Florin

You could, if you configure your transport connection correctly.

Transport request from development system to testing system

Hi,
I have collected necessary objects in (development) the transport request except 0DUNN_AREA infoObject .Because info object 0COMP_CODE is compounded with Info object 0DUNN_AREA and 0COMP_CODE is in revised version in development system (But available in active version in testing). Suppose I release that transport request from development system to testing system it get overwrite 0COMP_CODE in testing system?
Thanks

Hi Jk,
Depending the same technical names it will get overwrite in the testing server. But if the object 0DUNN_AREA is necessary in any objects which u have collected then u havce to collect it in the rtequest or else u will get RC8.
Khaja

Transporting Transport Request from One System to other

Hi All,
I want to create tranport request from ECC 5.0 System to ECC 6.0 system.
Please let me know steps for creating transport request and transporting transport request from one system to other system.
Thanks in advance.
Best Regds,
zubera

Hi,
You cannot transport request from ECC5.0 to ECC6.0.
Instead follow this:
In ECC5.0
Include all the objects into a transport request & provide the transport request no. to BASIS.
BASIS team will create 2 files for you based on the transport request no.
in ECC6.0
Provide the 2 files to BASIS Team & ask them to import them.
The objects would be available in ECC6.0
Best regards,
Prashant

How to reverse Transport requests from sand box to development client

Dear all,
I am doing some testing on Sand box, I made some transport requests from development to sandbox, which effected some settings in sandbox.
Now I want to reverse those transport request from sand box to development, unfortunately I didn't make any note of transport requests which I transported from Development to Sandbox.
Please educate me how to reverse transport requests from sand box to development.
your suggestions are highly appreciated
thank you
Venu Gopal

There is no reverse, you have to create a new transport with the original settings.
Programs keep track of their versions and are easier to pull a previous version, configuration can be tougher, open all the folders in SE10 to see if you can determine the configuration changes.

Path to download TUBS transports requests from service market place

Hi All,
I have to donwlad the following tubs transports request from service market place and apply in our system.
Can sombody tell me the patch from where to download these transports as I am not able to search it.
L4HK212672 Cumulative T5UTA,
T5UTB, T5UTD, T5UTR and T5UTW
L4HK210165 Cumulative T5UTZ,
Rel. 4.6B and above
L4HK211363 Table T5UTX
L4HK210163 Tables BTXTAXC
L4HK212671 Tables T5UTN, T5UTT,
BTXFORM and BTXAUTH
Regards,

Hi Vicky,
please read below note for details.. should be helpful :
1532493 - TUB: Applying transport files from TUBs
SAP provides updates via transport files. These transport files are released in an SAP Note. The Note lists the transport numbers and which tables they are updating. The files are also made available on SAP Service Marketplace.
Refer to the Tax Update Bulletin webpage on SAP Service Marketplace to find the corresponding TUB transports:
http://service.sap.com/tubs
SAP Notes like below have TR files attached.. you need to open relevant note for your version of Tax Factory.
1671113
TUB 054: Tax Update Bulletin for TaxFactory 9.0.
1547059
TUB 020: Tax Update Bulletin for TaxFactory 9.0.
1547060
TUB 021: Tax Update Bulletin for TaxFactory 9.0.
1546999
TUB 019: Tax Update Bulletin for TaxFactory 9.0.
1910035
TUB 122: Tax Update Bulletin for TaxFactory 9.0.
1649559
TUB 043: Tax Update Bulletin for TaxFactory 9.0.
1770515
TUB 089: Tax Update Bulletin for TaxFactory 9.0.
1651654
TUB 044: Tax Update Bulletin for TaxFactory 9.0.
1857553
TUB 113: Tax Update Bulletin for TaxFactory 9.0.
1857554
TUB 113: Tax Update Bulletin for TaxFactory 9.0.
2013234
TUB 141: Tax Update Bulletin for TaxFactory 9.0.
2013235
TUB 141: Tax Update Bulletin for TaxFactory 9.0.
1525440
TUB 010: Tax Update Bulletin for TaxFactory 9.0.
1772250
TUB 090: Tax Update Bulletin for TaxFactory 9.0.
Hope this helps.
best regards
ashish vikas

Move transport requests from one landscape to another

HI Gurus,
   I am facing a situation where i need to import the Transport Request from one landscape to another.
    Consider i have two landscapes DE1 TE1 PE1 and DE2 TE2 PR2. and both the landscapes are on
    different release.
     I have created a Transport Request DE1Kxxxxxx.
     And now i want to use this transport request in the other landscape of DE2 TE2 PR2.
   How can i do that. Is there any process in using the Transport Request created in another landscape of different release.
Please guide me.
Thanks in Advance,
Sachin Kumar.

Hi,
Just do manual copy of both data and cofile to second landscape...there you need to change the naming conventions(SID)....But it will works only that is a customizing request...cause developments will depends upon installation nubers....
warm regards
Harish K Reddy

Transport requests from BW 7.01SP5 to BW 7.0SP18

Hi Experts,
The BW systems are upgrading with enhance package 1. Currently development and QA system are finished,and production system are planned to upgrade after two weeks. But now we have some key issues which need transport some requests from DEV to PROD system.
Can we transport requests from BW 7.01SP5 to BW 7.0SP18 or we should wait until all upgrade finishing?
If we can transport,what should we pay attention to before the transporting ?
(These requests are process chain related.)
Thanks!

Hi,
you development is only for process chain?
=> change the process chain direcly in production system. After the upgrade import the transport with the option "overwrite".
Sven

Transporting requests from development server to production server

Hi gurus,
can anyone tell me how to transport requests from development server to production server.

You can use SAPGUI now instead of calling tp at OS level.
Serious: Totally wrong forum!

Regarding Transport request from system to file or product CD

Hello Gurus,
Can anyone tell me how to transport transport request from system to file or product CD.
It is urgent.
Thanks in advance.
Best Regards,
zubera

Hi Albert,
Thanks for your reply.
I want to know the steps how to tranport TP ( tranport request ) from system to file.
Please can you detail procedure or any link to transport TP from SAP to file and file to SAP system.
Thanks in advance.
Best Regards,
zubera

Transport request from non-unicode to unicode

Similar Messages

Maybe you are looking for