Transport Request in All client

Dear All,
In my Quality server there are 4 client (630, 650, 670, 690). When i transport any customized request from DEV to QLT, then in each client I have to transport it. It means i have to do same activity for 4 times. So is there any way by which I can transport the request in all client at same time? How?
Regards,
Nisit

Hi Nisit,
Try scehduling a Background Job (TMS_BCI_START_SERVICE), which run at the same time in all the clients.
Thanks
Ahamed

Similar Messages

Transport request to all clients in system from STMS

Hello colleagues,
Wich parameters should we activate so that every transport request wich is imported in our test systems updates all available clients in the system?
Kindest Regards

Hi Enrique,
That should be part of extended transport protocol. Check [this|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1b/9dc2d6e59911d184810000e8a57770/content.htm] URL for ETP. Also have a look at [this|Auto import from one client to another with in same system; thread, where your question is being answered.
Kind regards,
Mark

Transport Request copy between clients in the same system

I have one workbench request needs to transported across all our client in the QA system
Development system has 3 clients - D001,D002,D003(client)
I am supposed to do the development works in the D001 client.
Unfortunatel I did in the D002 client.
But our transport route is D001 --->Q001only.
Is their any way I can copy the Transport request from D002 to D001 and then release D001-Q001.
I am able to repeat the same work relevant to D002 client.But there is no transport request is creating for the new
work in D001.
Please advise on this.
Advance Thanks

Hi,
You cannot copy a transport request from one client to another. Try to make a client copy so that the changes you made to D002 client will get effected in D001.
Hope this helps.
Assign points if useful.
Venkat

Prevent import of transport request for certain client

Hello.
I have two clients in TST system.
I would like to delete one client.
How can I prevent import of transport request for certain client?
At hte same time users must transport request into other client in TST system.
Is it possible?
I know next features:
1.
se37-->
SCCR_LOCK_CLIENT
SCCR_UNLOCK_CLIENT
2.
tp locksys SID (from OS level)
but they use for all client (for whole system).
Best regards,
Denis

se37-->
SCCR_LOCK_CLIENT
SCCR_UNLOCK_CLIENT
These are Client Specific not Cross client. So if you want to delete a client just Schedule the Delete Job and lock the client and no body would be able to transport on that client. I hope i understand your question properly.
Regards,
Subhash

How to Delete Transport request for Delete client

Hi guys,
We are going for upgrade from 46C to ECC.
we found client XXX does not exists but Transport request for the client XXX does exists. so we plan to delete it or release it before going to upgrade.
But SAP does not allow me to delete or release it. Is there any special way to deal this issue.
Please suggest me.
Thanks
Jaichan

You could have the lost client XXX recreated again by system administrator using a "minimal" client copy (just users), should take only minutes and not much disk space.
Then you can release or delete the transports, afterwards delete the client again.
I don't know another way of doing it.
Thomas
P.S. all the other replies so far do not take into account that you cannot change transports that were created in a different client.
P.P.S did you ever look at the long text for message TK056? This clearly explains your options here
To transfer the request to the current client, proceed as follows:
1. Go to the request overview.
2. Position the cursor on the request and choose Request/task -> Display/change.
You are asked if you want to copy the request and all tasks belonging to it to the current client.
3. Answer "Yes".
The request is copied to the current client, and can then be edited as normal.
Note
For this procedure, you require the "Change source client" authorization contained in the SAP standard authorization S_CTS_TR_ALL.
You can copy only your own requests to another client.
In order to copy other users' requests, you first have to assign them to you.
You can reassign the request to you in another client only if the original client no longer exists (prerequisite: You want all client-specific entries to be deleted).
I was not aware of this up to right now...

Inconsistant transport requests after local client copy

Dear experts,
our IT department just made a local client copy with profile SAP_ALL, by which all the transport requests had been copied, too, including quite a lot of workbench and customizing orders in status changeable. I'm supposed to do some basic setup and cleanup in the new client, but I'm confronted with problems like objects being locked in orders/requests that cannot be changed in the new client, as they belong to the original source client.
How can I get rid of those inconsistencies? I'd preferred the new client without transports and without locked objects. Is it really necessary that I clean up this mess manually? Would it have been better to clean this up before the client copy? Or could we just do the client copy with another profile in order to avoid those problems?
Thanks for your appreciated help
Andreas

Hello,
Transports are NEVER part of a client copy.
In fact all the data of your transports is stored in tables that are client independent (E07* tables).
This means that you can view (not edit) always all transports from all clients in a specific system.
When you want to edit or release a transport the source client is important (in which client was the transport originally created).
This is stored in table E070C for all transports and can not be overruled.
So I recommend that you don't clean anything related to transports after a client copy because this will also impact the other clients !
Success.
Wim

Transporting request to two clients

Hi Experts,
We have two clients(100 and 200) in production system.
1. If we transport client-independent request to any client 100 or 200, will it effect entire system?
2. Shall we have to transport client dependent request to production 2 times?( first to 100 and second to 200 via STMS)?
3. Using SCC1 shall we pull the request from client 100 to 200? is it right process in production?
Please advise..Thanks in advance
Regards
Veera

Hi,
We have two clients(100 and 200) in production system.
1. If we transport client-independent request to any client 100 or 200, will it effect entire system? - yes
2. Shall we have to transport client dependent request to production 2 times?
( first to 100 and second to 200 via STMS)? ..... yes
3. Using SCC1 shall we pull the request from client 100 to 200? is it right process in production? -
yes
1. All Workbench requests are Client-Independant
2. Alll Customization requests are known as Client dependant.
Thanks
Siva

Transport request from a Client that doesnot exist.

Hi,
I want to make changes to a program. The program is under a modifiable Transport request (not released).
This transport request is created in client 10 which no more exists.
Now i need to do the changes in client 100.
I cannot change the owner, neither can i delete nor release.
Basis also cannot do it as the client 10 doesnot exist at all.
Any solution?
Answers will be rewards.
Thanks
Skantheri.

Hi,
1. one option is goto se09 and goto that request.
2. expand that request.
3. In that remove the object(program)
4. If that is successful, then it will allow to change the program and automatically ask for new request number.
regards,
amit m.

Getting Transport Request List from Clients

Hi,
I need to fetch all the transport request list which exist in other clients from development client. Is there any function module to fetch the data.
Can someone provide me the code so that it will be useful for coding in my program.
People will be rewarded for the solution which helps me a lot.
Thanks,
Jyothi

Hi,
You will like the french comment
*   Procédure P_FIND_DATA.                                             *
form p_find_data.
data : it_request     type tmsiqreqs ,
         it_tmp_request type tmsiqreqs with header line ,
         it_e070        type sorted table of e070
                             with header line
                             with unique key trkorr .
data : begin of it_trfunction occurs 10 ,
           domvalue_l type domvalue_l ,
           ddtext     type val_text ,
         end   of it_trfunction ,
         begin of it_trstatus occurs 10 ,
           domvalue_l type domvalue_l ,
           ddtext     type val_text ,
         end   of it_trstatus ,
         begin of it_trimpflg occurs 10 ,
           domvalue_l type domvalue_l ,
           ddtext     type val_text ,
         end   of it_trimpflg .
* Recherche des données sur le système C27.
call function 'TMS_UIQ_IQD_READ_QUEUE'
    exporting
      iv_system               = 'C27'
      iv_domain               = 'DOMAIN_D27'
    importing
      et_requests             = it_request.
it_tmp_request[] = it_request[].
loop at it_tmp_request
       where owner in s_bname
       and   trkorr in s_trkorr.
    move-corresponding it_tmp_request to it_data.
    move : it_tmp_request-sysnam to it_data-csysnam ,
           it_tmp_request-impflg to it_data-cimpflg ,
           it_tmp_request-maxrc to it_data-cmaxrc .
    append it_data.
    clear it_data.
endloop.
* Tri.
sort it_data.
* Recherche des données sur le système P27.
refresh : it_tmp_request, it_request.
call function 'TMS_UIQ_IQD_READ_QUEUE'
    exporting
      iv_system               = 'P27'
      iv_domain               = 'DOMAIN_D27'
    importing
      et_requests             = it_request.
it_tmp_request[] = it_request[].
loop at it_tmp_request
       where owner in s_bname
       and   trkorr in s_trkorr.
    read table it_data
         with key trkorr = it_tmp_request-trkorr.
    if sy-subrc eq space.
      move : it_tmp_request-sysnam to it_data-psysnam ,
             it_tmp_request-impflg to it_data-pimpflg ,
             it_tmp_request-maxrc to it_data-pmaxrc .
      modify it_data
             transporting : psysnam pimpflg pmaxrc
             where trkorr = it_tmp_request-trkorr.
    else.
      move-corresponding it_tmp_request to it_data.
      move : it_tmp_request-sysnam to it_data-psysnam ,
             it_tmp_request-impflg to it_data-pimpflg ,
             it_tmp_request-maxrc to it_data-pmaxrc .
      append it_data.
      clear it_data.
    endif.
endloop.
* Recherche des données générales sur l'ordre.
select trkorr trfunction trstatus as4user as4date as4time
         into corresponding fields of table it_e070
         from e070
         where as4user in s_bname
         and   strkorr eq space
         and   trkorr in s_trkorr.
* Recherches des textes desciptifs.
select domvalue_l ddtext
         into table it_trfunction
         from dd07t
         where domname    eq 'TRFUNCTION'
         and   ddlanguage eq sy-langu.
select domvalue_l ddtext
         into table it_trstatus
         from dd07t
         where domname    eq 'TRSTATUS'
         and   ddlanguage eq sy-langu.
select domvalue_l ddtext
         into table it_trimpflg
         from dd07t
         where domname    eq 'TRTPIMPFLG'
         and   ddlanguage eq sy-langu.
* Enregistre les informations dans la table IT_DATA.
loop at it_data.
    read table it_e070
         with key trkorr = it_data-trkorr.
    if sy-subrc eq space.
*     Recherche libelle du code TRFUNCTION.
      read table it_trfunction
           with key domvalue_l = it_e070-trfunction.
      if sy-subrc eq space.
        move it_trfunction-ddtext to it_data-trfunctiont.
      endif.
*     Recherche libelle du code TRSTATUS.
      read table it_trstatus
           with key domvalue_l = it_e070-trstatus.
      if sy-subrc eq space.
        move it_trstatus-ddtext to it_data-trstatust.
      endif.
*     Recherche libelle du code CIMPFLG.
      read table it_trimpflg
           with key domvalue_l = it_data-cimpflg.
      if sy-subrc eq space.
        move it_trimpflg-ddtext to it_data-cimpflgt.
      endif.
*     Recherche libelle du code PIMPFLG.
      read table it_trimpflg
           with key domvalue_l = it_data-pimpflg.
      if sy-subrc eq space.
        move it_trimpflg-ddtext to it_data-pimpflgt.
      endif.
      move-corresponding it_e070 to it_data.
      modify it_data.
      delete it_e070
             where trkorr = it_data-trkorr.
    endif.
endloop.
* Ajoute les ordres qui n'ont pas encore été liberrés.
loop at it_e070.
    clear it_data.
    move-corresponding it_e070 to it_data.
*   Recherche libelle du code TRFUNCTION.
    read table it_trfunction
         with key domvalue_l = it_e070-trfunction.
    if sy-subrc eq space.
      move it_trfunction-ddtext to it_data-trfunctiont.
    endif.
*   Recherche libelle du code TRSTATUS.
    read table it_trstatus
         with key domvalue_l = it_e070-trstatus.
    if sy-subrc eq space.
      move it_trstatus-ddtext to it_data-trstatust.
    endif.
*   Recherche libelle du code CIMPFLG.
    read table it_trimpflg
         with key domvalue_l = it_data-cimpflg.
    if sy-subrc eq space.
      move it_trimpflg-ddtext to it_data-cimpflgt.
    endif.
*   Recherche libelle du code PIMPFLG.
    read table it_trimpflg
         with key domvalue_l = it_data-pimpflg.
    if sy-subrc eq space.
      move it_trimpflg-ddtext to it_data-pimpflgt.
    endif.
    append it_data.
endloop.
sort it_data.
* Recherche des libellés des ordres.
loop at it_data.
    select single as4text
           into it_data-as4text
           from e07t
           where trkorr eq it_data-trkorr
           and   langu eq sy-langu.
    if sy-subrc eq space.
      modify it_data.
    endif.
endloop.
* Modifie les codes pour positionner les icones.
loop at it_data.
    case it_data-cmaxrc.
      when '    '.
        move '@EB@' to it_data-cmaxrc.
      when '0000'.
        move '@08@' to it_data-cmaxrc.
      when '0004'.
        move '@09@' to it_data-cmaxrc.
      when others.
        move '@0A@' to it_data-cmaxrc.
    endcase.
    case it_data-pmaxrc.
      when '    '.
        move '@EB@' to it_data-pmaxrc.
      when '0000'.
        move '@08@' to it_data-pmaxrc.
      when '0004'.
        move '@09@' to it_data-pmaxrc.
      when others.
        move '@0A@' to it_data-pmaxrc.
    endcase.
    modify it_data.
endloop.
endform.                     " P_FIND_DATA

How to move a transport request from one client to the other

Hi,
I created a new transport request with a lot of elements (and also some modifications), but I made it in the "wrong" client on the system. Now I have the question if there is any possibility to change the client-relation of a transport request via SE01 (or similar transaction). Copy and Paste of the element list isn't the optimal way, because there are also table contents in the transport request.
Can you give me a hint?
Thank you
Kind regards
Markus

Yes you can change the traget client.
Check the TR properties and set the taget client .

Transports. (Copy as per transport request from one client to another)

Iu2019ve enhanced the datasource 2lis_13_vditm with required fields in client 100. I removed hide check box for the fields and activated the datasource. Iu2019m maintaining three separate requests one for deactivation, second for activation and third for datasource modification.
In order to reflect these changes to client 200, I run SCC1 and copied the requests from client 100 to client 200. Iu2019m wondering these changes are not reflecting into client 200. Still Datasource is inactive in client 200 and active in client 100.
Advance thank you very much

Hi Sharsha;
Please run SCC1 and select "including Request Subtasks".
Don't forget any transport request.
Regards;
Ricardo

How to send the transport request from one client to other client?

Hello Friends,
I have generated one transport request in one of the client in Development server.Now as it is customizing request so unless and until i transport it to other client within the same server, Changes will not be visible in other clients.So how to transport this customizing request from one client to other client within the same server.
Thanking you guys in advance.
Regards,
Jitendra

Hi Jitendra,
Release your Transport Request via SE10, then go to STMS & import the request first to your quality server, then to your production server.
Apologies for the incorrect inputs, please use SCC1 as advised by other forum members
Hope the above clarifies your query.
Regards,
Vivek
Edited by: Vivek on Mar 16, 2009 1:05 PM

Issues with creating transport request for cross client changes???

Hi,
In our ECC 6.0 dev system, functional team makes all their configurations in client 100.But ABAP team is using another client 120 to create /modify ABAP objects.
So all workbench requests getting created in client 120.
I would like to have all customizing/work bench requests created and released from client 100.Is is possible to re-assign all work bench requests created in cleint 120 to client 100?
Thanks
Ram
Message was edited by:
        rama subramaniam

Hi Rama,
             If u r making any workbench changes that means they are repository
             objects it will reflect entire system. I dont think we need to import them
              into the same system once again. Hw ever we can do that by scc1.
Regards,
Vamshi.

Transport Request Information

Dear All,
I have three systems landscape. My quality server having 4 clients. During the transport. I have transported all transport requests to all clients to make them sysnc.
I would like to know that which transport requests have gone to which clients. Please tell me the table name from where I can download the data and make my comparision.
Regards
Vimal

Check tables E070, E071 and E070C,
E070 - Stores transport headers
E071 - The names of the objects of a transport request is stored in table.
E070C - stores information for client specific tarnsports
This will help you out.

Checking Transport requests present in two different clients.

We have around 200 transport requests that have been transported by consultants from D01 to R01-client1/client2 and I need to check that which transport is present in which R01 system client.. i.e. a) how many of them are present in client 1, b) how many are in client 2 and c) how many are in both. We can check the logs of every transoprt through SE10 but Is there any quick/automated way of checking mass Transport Requests status ?

Dear Raichandi,
Please follow the below steps to get the desired information.
1. Login to D01 (Dev client) to find the released transports..
2. Execute transaction SE01
3. Go to "Transport" tab
4. Give User as "*"
5. Select "Request Type" by tick mark as Customizing Requests and Workbench Requests
6 Select "Request Status" by tick mark as "Released" only
7. Click on "Display Button"
8. It would display all the released transports requests.
9. From here you can copy and paste all these requests numbers in the spread sheet
(CTRL + Y) then use Mouse to select the requets, (CTRL +C), and then paste it in exel sheet.
1. Now Login to the R01 (QA client) to find the import status of the release transports from D01.
2. Execute transaction STMS
3. Click on "Import Overview (F5)" or the Truck Symbol.
4. It will take you to the Import Queues for the Import Domain D01.
5. This is the option where you can select the Queue to see the desired information for Quality/Stag/prod system.
6. Now double click on the required "Import Queue" for R01 (Quality system).
7. Now Go to "Import History or (CTRL+ F7)"
8. Change the Filters as required (may be for time interval or remove any filter on client -Clt)
9. The import History will display all the Imported requests in all clients in one system (SID), so for your case it will display requests for R01/client1 and R01/client2
10. Copy the same in the spread sheet...
11. Do the VLOOKUP to find which are not imported in which clients.
Please provide the feedback if it works.
Thanks,
Vinod

Transport Request in All client

Similar Messages

Maybe you are looking for