Transport Request Info

Hey Experts,
I want an heads-up and detail information on Transport Request from the Development Box to the QA Box. Appreciate if you can send me any useful doc on the same at my emai id- [email protected]
Thanks,
Paddy

HI PADDY
IF YOU WANT TO INFORMATION ABOUT UR Transport Request JUST
USE T CODE : SE10 OR SE09
THANX
SUNIL JAWALKAR

Similar Messages

Tables containing transport / request info

When i click on a transporet request i get a tree with the objects in that transport.
Does anybody know the tables that contains the information about certain transport resuest.

Eric,
PL check E071 table
Good Luck,
Suresh Datti

Info-objects of an Info-provider under one Transport request

Hi All,
I am in the process of transporting the Objects from development to QA environment,
As a first step in the transport process, i need to transport the info-objects before transporting other info-providers, transformations etc,
i have several info-providers like BBP_PO, SC, SCA etc, which inturn has more than 100 info-objects that needs to be put under seperate transports.
Say i have info-provider ZBBP_SCA which has 50 info-objects, i need to put those 50 Info-objects in one transport request and then info-provider ZBBP_SCA in another transport request and then its transformations etc.
Can anyone tell me the steps of only collecting the necessary info-objects of ZBBP_SCA alone to be put under one transport.
I tried to do that, but it is collecting all the info-objects, info-areas related to ZBBP_SCA, instead of collecting only necessary objects of ZBBP_SCA.
I will assign points for sure
Can anyone help
Thanks in advance
Pooja

Hi pooja,
So your intention is not to include anything other than target in second request.
For this right click over the object from where you dont intend to transport and say donot transport any below in transport connection.
The reason for target also showing the info objects and so on is that they are all necessary to form this cube definition.
Anhyhow, as you have ensured to collect them seperately go ahead with the approach mentioned above.
Naveen.A

We couldn't release any transport request!

Hi experts,
We could't release any transport request on DEV from today.
We could do it until yesterday.
We have never changed any settings.
Except release, we can use SAP system, and
we can import released transport request to QAS .
Also I could tp addtobuffer on DEV.
[Operation]
SE10 -> select transport request -> click [release] button
and, we can see the error message as below.
Error Message *****************************************************
Test call of transport control program (tp) ended with return code
[Transport Log]
We can see the log as below.
ERROR: No connect due to DbSl Load Lib Failure
ERROR: environment variable dbms_type is not set.
ERROR: Connect to RDV failed (20090220140504).
ERROR: Connect to RDV failed (20090220140740), failed to read table SVERS.
[Our Action]
1. Change Environment variable & Restart SAP (note 351586)
2. replace tp & saptrans
3. change parameter (note 175627)
4. add full control to everyone on sap/trans
5. see note 534765，98678，128126，592514，799058，879941，508140，610640
Thank you in advance.
BR,
Toshi

Hi,
Thank you for your reply.
I did r3trans -d, and the result is as belllow.
F:\usr\sap\RDV\SYS\exe\run>r3trans -d
This is r3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function:   db_ntab
2EETW000 fcode:      NT_RDTDESCR
2EETW000 tabname:    TADIR
2EETW000 len (char): 5
2EETW000 key:        TADIR
2EETW000 retcode:    2
r3trans finished (0012).
Also I checked TP_DOMAIN.pfl, but it seems that there is no problem.
But I found doubtful point.
It is environmental variable, and now it is differnt from last friday.
Example, last friday , there was variable as bellow,
but today I couldn't find them
In the meantime , I will deal with them.
dbms_type=MSS
MSSQL_DBNAME=RDV
MSSQL_SCHEMA=rdv
MSSQL_SERVER=<hostname>\RDV
Toshi

Incorrect Transport Requests : SAP delivery version getting collected

Hi,
In our development system, when we try to include objects in a transport request, the entries in the transport request are getting saved as the SAP Delivery version rather than the active version.
For example an ODS ( z object, newly created in development environment) entry is being logged as R3TR DODS XXXX (Obj name) rather than R3TR ODSO XXXX.This is happening for all object types ( Info objects, cubes, workbooks etc).
Also while collecting workbooks in transport request ( using transport connection) we got the following error -Logical transport object 414Q not found in table RSTLOGOPROP. Not sure if the above two issues are interlinked.
Appreciate your help on this.
Kind Regards,
Bansi

Hi KxD,
I don't expect the loading date to be equal to the delivery date but I expect it to be 2 days before the delivery date since the time specified on the route is 2 days. So I would expect my loading date = delivery date - 2 days (route time)
The way system is acting is loading date = committed date + 2 days (route time).
FYI.. when you turn on route scheduling the delivery creation date is based off of your route time and not your planned delivery time from the material master
Thanks,
Imran

Problem in extended Transport control while setting up transport request.

I created a BDC program which will create a database table upon executing..
The problem is the program worked well since yesterday, But today when i executed it , it is showing a information message when creating a new transport request .
Extended transport control is not active:
Cannot specify target client
Since it s a recording ,and all the windows are processed using an OK CODE, this info box comes all of a sudden .I dont kno what went wrong , coz it was working fine the previous day.
i could not create a new workbench request even after ignoring that info message.
Pl suggest me what could be wrong.

This message has a long text, please read it.
Check with your system administrators, if they have changed anything regarding the transport process.
In addition, instead of using "fragile" recordings, try using function modules like DDIF_TABL_PUT.
Thomas

Problem in tables of transport request !!!!

Hi all,
When i doing the Charm Process....nd during that when the developer generates the transport request....at that time that tp request appears in table /tmwflow/trordhc but it does not appear in /tmwflow/track .... nd after releasing the subtasks and then finally the whole transport request....at that point also it does not appear in /tmwflow/track ..... after this when the basis person pass that transport request to quality....then the /tmwflow/track shows 1 record for that transport request.....so finally after the whole flow /tmwflow/track will show 2 records for that transport request i.e 1 of quality and 1 of production....logically 'dev' record should also be there.....what i am noticing is after few hours like 2 or 3 hours that development record started appearing in table /tmwflow/track .... so is it a problem in configuration of solution manager or this sudden appearance of dev record is ok....coz ive to build a report in which it displays the tracking of tp requests....
Any suggestions would be helpful...
Regards,
Deadlocks

Hey deadlocks,
many ChaRM tables are updated as Fernando said when cmssyscol job finished.
I guess those 2/3 hours correspond to the time u waited before the job runned. The transaction solar_eval and a couple of others allow u updating data as well.
U have to know that this job may sometimes/quite often give unsupected/missing data; and also delayed. The best you can do is simply read the tr log using a function modul and interpretate info concerning the transport requests
    CALL FUNCTION 'TRINT_TDR_USER_COMMAND'
      EXPORTING
        iv_object = lv_object
        iv_type    = ls_sel_node-type
        iv_command = lv_command
      IMPORTING
        ev_exit    = pv_exit.
LV_OBJECT                                             SLMK900004
LS_SEL_NODE-TYPE                                     REQU
LV_COMMAND                                             TAST
for example.
You can debug log reading in SE01 and put a watchpoint on instruction 'CALL FUNCTION'. It is the second one.
This will display log on screen
Good luck
Khalil

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

How to include the transport request

Hi Experts,
i am asked to create a copy of cube and asked to .Include the Transport request in request DEVK9795967
Please explain how to do it,
Thanks in Advance
Nitya

Hi,
You can create the copy of Infocube and Include the transport requst. Follow bellow steps;
1. Goto RSA1> Select Info Area> Select Create the Infocube> Give the Technical/Discreption and Select the Copy of the Cube> Save and Activate.
2. At acitvation time the system asked the request.
Select the Own request from Pop Up> Select your created request> Select Continue.
It wil include the your created request.
Regards.

Wrong Development class in Transport request

Hi Gurus,
I had to change the Info OBject to meet the business requirement(Enabled Text Master Data). While creating transport request, I enteres wrong development calss in treansport requset. No transport request were released to QA. Now how to fix this issue, I mean How to enter the right Development class for the Info Object?
Thanks in advance.

dear Raj,
you can change the development class/package with
rsd1 (for characteristic), rsd2 (keyfigures),
type in your infoobject name, and click button 'object directory entry' in top menu, in next screen click pencil icon ('change/display' F6) and choose/type in the right development class/package and 'save'.
hope this helps.

The transport request is running all the time, what is the problem

I have a transport request which can transport from DEV to QAS successfully ,but failed when the request transport to PRD, I found the request running for several hours. I do not know what the problem? how can I check this problem?
need your help thanks

Hi
The background job Rddimpdp is not scheduled in the system for client 000...And you want to investigate what happend to the job..
The background job details are kept in table TBTCO..So if you goto SE16 and try to choose the fields which are of your interest..as it(this table) has lot of fields. And in this we have fields like last run time,scheduled by,last job change time etc.So with the above information i hope you will be able to get the information you want.
And if everything is fine ..the backgrouns job alone can vanish someone manually might have done done something ..and that can be found out by above investigation on the table.
Hope this info helps...
Regards
Vani

Add R3TR element to the Transport Request

Hello BW Experts,
I am transporting a query and get the below error message.
Element 40WVM5KB0OENRCAWG7PN2GHM3 is missing in version M
Message no. R9132
Diagnosis
Element &1 in version &2 is referenced but is not available.
System response
The action had to be terminated.
Procedure
Please supply the missing elements to the system by transport.
if i go to rsa1 > transport connection > query elements > query > select the query (options dataflow before / only necessary objects )
i do not see the element 40WVM5KB0OENRCAWG7PN2GHM3 in that list given.
I think there is a alternate way of adding particular elements to the request. Wondering if anyone remembers the transaction code / table for add a element to the request.
Thanks,
BWer

dear BWer,
use following program (create first) to locate the query element
transport
REPORT ZQUERY_DEF_TEST .
Tables: rszeltdir, "query element table
rszelttxt, "query element texts
rszcompdir, "global query elements
e071. "objects in transport requests
*parameters
parameters: Req_id like e071-trkorr.
selection screen to input long ID 25 char generated name
select-options: long_ID for rszeltdir-eltuid.
*itab to hold related info
data: begin of i_query_desc occurs 0,
local, "Local to Query
eltuid like rszeltdir-eltuid, "25 char generated ID
compid like rszcompdir-compid, "technical name
deftp like rszeltdir-deftp, "element type
el_txt(16), "element type text
txtsh like rszelttxt-txtsh, "short text
txtlg like rszelttxt-txtlg, "long text
owner like rszcompdir-owner, "owner
end of i_query_desc.
data: xlocal.
sy-tvar0 = Req_id.
*find all query objects for transport request entered
select * from e071 where trkorr = req_id and
object = 'ELEM'.
add them to the select-options list
long_ID-low = e071-obj_name.
append long_ID.
clear long_ID.
endselect.
*loop through select option table and find details of Query element
Loop at long_ID.
clear: i_query_desc,
rszeltdir,
rszelttxt,
rszcompdir,
xlocal.
select single * from rszeltdir where eltuid = long_ID-low and
objvers = 'A'.
if sy-subrc <> 0.
write: / long_ID-low, ' Query element not found.'.
write: / .
else.
select single * from rszelttxt where eltuid = long_ID-low and
objvers = 'A'.
if sy-subrc <> 0.
write: / long_ID-low, ' not found in table RSZELTTXT.'.
endif.
select single * from rszcompdir where compuid = long_ID-low and
objvers = 'A'.
if sy-subrc <> 0.
write: / long_ID-low, ' not found in table RSZCOMPDIR.'.
xlocal = 'X'.
endif.
fill itab for list
i_query_desc-local = xlocal.
i_query_desc-eltuid = rszeltdir-eltuid. "25 char generated ID
i_query_desc-compid = rszcompdir-compid. "technical name
i_query_desc-deftp = rszeltdir-deftp. "element type
case i_query_desc-deftp.
when 'SEL'.
if xlocal = 'X'.
i_query_desc-el_txt = 'Selection'.
else.
i_query_desc-el_txt = 'Restricted K/Fig'.
endif.
when 'REP'.
i_query_desc-el_txt = 'Query'.
when 'VAR'.
i_query_desc-el_txt = 'Variable'.
when 'STR'.
i_query_desc-el_txt = 'Structure'.
when 'CKF'.
i_query_desc-el_txt = 'Calculated K/Fig'.
when 'FML'.
i_query_desc-el_txt = 'Formula'.
endcase.
i_query_desc-txtsh = rszelttxt-txtsh. "short text
i_query_desc-txtlg = rszelttxt-txtlg. "long text
i_query_desc-owner = rszcompdir-owner. "owner
append i_query_desc.
clear i_query_desc.
endloop. "@ long_ID
list results
sort i_query_desc by local deftp owner.
loop at i_query_desc.
write: / sy-vline,
i_query_desc-eltuid, sy-vline, "25 char generated ID
i_query_desc-compid , sy-vline, "technical name
i_query_desc-deftp , sy-vline, "element type
i_query_desc-el_txt, sy-vline, "element text
*write: / i_query_desc-txtsh , "short text
i_query_desc-txtlg(40) , sy-vline, "long text
i_query_desc-owner , sy-vline.
write: sy-uline .
endloop. "@ i_query_desc
hope this helps.

Transport request from development system to testing system

Hi,
I have collected necessary objects in (development) the transport request except 0DUNN_AREA infoObject .Because info object 0COMP_CODE is compounded with Info object 0DUNN_AREA and 0COMP_CODE is in revised version in development system (But available in active version in testing). Suppose I release that transport request from development system to testing system it get overwrite 0COMP_CODE in testing system?
Thanks

Hi Jk,
Depending the same technical names it will get overwrite in the testing server. But if the object 0DUNN_AREA is necessary in any objects which u have collected then u havce to collect it in the rtequest or else u will get RC8.
Khaja

Need help on Transport Requests in BI

Hi All,
I am doing BW Transports. I have collected all info Objects with Option "Necessary Objects" in one request.
In 2nd Request, i have selected Data target with the Option "Data Flow before", so that i can get all the objects from Datasource to Data target. By Default, the Info Objects Checkboxs are disabled and transport requests are displayed for Infobjects alone.
My Query is, there is a info Object called 0PLANT, which is having seperate data flow for master data. Do i need to install seperately for Master data flow. ie)0PLANT_ATTR of transfer rules and other Objects.
Or it will automatically be installed while collecting the 1st request itself.Please help on this issue.
Thanks,
Siva.

HEllo,
First check whether 0PLANT is already in the prod box and whether its loading. Its a part of global master data and there are chances that it already may be in use.
If so then there is no need to capture and re send it.
Secondly, if its not available till prod, then you need to analyze whether you really need to load 0PLANT master, if your requirement does need it then only you need to capture it and sent it ahead.
Check your first request and verify if its already captured. If so then no need to capture it again, rather the system wont allow you to capture the objects which are already locked in some other active transport request.
Regards,
Shashank

SEM BCS Transport Request

Dear Experts,
Kindly let me know, WHile configuring BCS , saving any Request
i) Whole configuration gets saved to the Transpoprt Request or It understand the discrimination between Data Model, Master Data Consolidation Fucntion etc ?
OR/And
ii) While creating Consolidation Task, Can required task be saved in Transport request and unwanted task can be ignored in the same request ?
Regards
Ritesh M

Hi Alvin,
Here is a link (and more detailed info is in the link INSIDE this thread))):
http://scn.sap.com/thread/839812
Additionally:
look at te OSS Note #627924 - 'Restrictions with transport in BW-based SEM-BCS'
and also at 773178 - 'Overview of consulting notes in SEM-BCS'.

Transport Request Info

Similar Messages

Maybe you are looking for