Transport Request Management(Import log)

gurus,
i had one serious problem,i had configured tms sucessfully and their is no any inconsistence in tms,DEV,QAS,PRD AND EXTRA SYSTEM AS SMD,When i import the request in QAS and PRD it is showing log,but when i import the request in SMD request is importing and it is show the object,but is not (Showing)displaying log.
plz help me regarding this,points will be awarded.plz......
Message was edited by:
Naresh M

go though it
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm</a>
regards
shiba dutta

Similar Messages

Need TP command for Add Transport Request to import Queue all at a time

Hi SAP gurus,
Can you tell the o/s or TP command to Add   Transport Request to import Queue all at a time which are available in co files directory   ,
Because I have to add 500- 600 request . For every request I canu2019t do like this STMS_IMPORT -- Extras=> other requests -add--
Thanks and regards
babu

Hi,
You can export list of all transport requests from your DEV system in one shot, from SE09-> Display (provide your required selection criteria) -> Goto -> "Display as List"
You can export these all Transport Requests as Spreadsheet. Then Filter out all your required 400 to 500 Transport Requests.
Now,use another excel sheet to create a file with the list of required transport request Nos only, then concatenate all of them to generate the required TP commands as mentioned below.
The syntax will become as follows:
column1           column2         column3
tp addtobuffer DEVK900123 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900124 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900125 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900126 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900127 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900123 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900124 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900125 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900126 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900127 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
-> Open Notepad and Copy+Paste these three columns & save the text file in the <Drive>:\usr\sap\trans\bin\ folder.
-> Then rename this .txt file to *.bat.
-> open a command prompt and change to the <Drive>:\usr\sap\trans\bin\ folder and run the .bat batch file.
Make sure that object lists of all the Trans. Requests are checked and confirmed for the transport to avoid data incosistency in target system. (e.g. Number Range Object)
Regards,
Bhavik G. Shroff

What checkbox "import again" when adding an transport request to import que

Hello
I wander what checkbox "import again" when adding an transport request to import queue means?
Thank you in advance

Hello Jan,
Well you should have searched in help.sap.com before posting here for basic concepts. Anyways, import again means after successful import also you can reimport that particular request.. Please see the below link for other options as well.
http://help.sap.com/saphelp_nw04/helpdata/en/5c/d21880fe3c11d2b461006094b9ea64/content.htm
Thanks,
Siva Kumar

Transport Request Management

Hi all,
i want some information about Transport Request Management and also good links for this topic.
plz anybody help me.
Balu.

go though it
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm</a>
regards
shiba dutta

CHARM : Sequence of transport request to import

Hi,
I'm configuring CHARM and found out below issue.
Scenario.
1) Charm project with project type implementation was created in SOLMAN. The type of change is normal correction. All transport request was created under 1 task plan. The transport was created based on configuration and some of the transport request have dependency to others transport request.
For example.
a)GL account need to be created in FI and was assigned to TR002.
b) MM need to configure the GL account that was created in a) and was assign to TR001
Issue
When the TR was release, how do we ensure that the sequence of import to QAS client and PRD client must follow the dependency of the TR created?
Appreciate your input.
regards,
Biah

Hi Sir,
I am working in SAP Solution Manager. I would like to know some concepts regarding CHaRM:
Currently our project is using Transoport Proposal. We will soon shift using CHaRM. But I am not aware of the Technical concepts.
1. How to configure CHaRM with the Tranport Proposal Flow.
2. How to navigate in CHaRM? (screenshots can help).
3. I am aware of the process but still after creating a CHaRM how do the Developer navigate to do a change in DEV system.
will he go through CHaRM. (please explain me).
4. Also explain me the total process from technical point of view till the CHaRM closure.
5. I am aware of SOLMAN in this process where the Charm requests are collected and monitored.
Hope I will get a good guidance from your end....

How works transport request management tool? (Version / Reference)

Hi,
I would like to understand how is working the transport management tool.
When you save an object in a transport request, what do we save exactly ?
Is it just a reference to the object to lock it
Or it is a specific instance/version of the object ?
This question because I'd like to understand if it is possible to update an object in an older version in the next system.
For example, I transport an Infocube v1 with TR1. Then I update this infocube and save the change in a TR2. I transport TR2 to my next system and I am getting here my V2 Infocube.
Then, let's imagine that the TR1 is transported again by mistake. What will happen ? Will I get my infocube in version 1 in the next system ? Or will I keep the version 2 as it was just a reference saved in theTR ?
Thanks,
Nico.

Hi Nicolas,
Let me demonstrate with example.
Let's say there an InfoCube A v1 with 10 Infoobjects in Development system.
Now we capture this in TR1and then we release the TP. So TR1 now contains the image of Infocube A v1 with 10 infoobjects .
Then lets say we make some changes such that the Cube A v2 now have 20 infoobjects and capture it in TR2. After releasing TR2 ,it will contain 20 infobjects .
So now when we move TR2 to next system(Production system lets say ) , the Infocube A v2 with 20 infoobjects will move and will be present in the Production system.
And again if by mistake we move TR1 , then infocube A v1 with 10 infoobjects will move to Production system (next system).
So in short the Transport stores the properties of the changes done to the BW object in tabular format and when we move a TR that corresponding tabular image gets replaced in the new system and the BW object gets modified accordingly .
Hope I am able to explain the situation you are facing .

Whats the diff between copying a Transport request and Importing a request?

Hi gurus,
Can some one explain me the difference between copying a transport request between clients and importing transport request between clients? say for eg: difference between copying a transport request containing a datasource being copied from client 100 to client 200 and importing the same request from client 100 to client 200?... When do we follow such scenario's?
thanks.
kishore

Hi Kishore,
A request copy applies only for customizing (client dependent) objects.
A request tracks object modifications since its last transport. if the object is created in source system and included in a transport request, when it is transported to another system, it will create the object in target system. Then if you modify the object, it will include modifications since last transport.
As i said, a request copy is only valid for customizing objects. This is entries in tables, you will see that you have two kind of requests, customizing and workbench. Workbench objects are client independent, so request copy doesn't applies.
it's very important to keep the order of requests when you transport and also not to delete requests in any system.
Hope this helps (and hope it is clear, if you have any doubt, just ask!).
Regards,
Diego

How to resolve problem for transport request which imported 'z' tcode

Hi Expert,
I have requirement from HSBC for Advance Payment Extraction. In this case they donu2019t have source code in text file so that they gave us request number which we imported in IDES. Now bu2019coz of this u2018Zu2019 Tcode created automatically and whatever the u2018 Zu2019 Programs are available also created. But when I will run this tcode and came back that time runtime error is coming I am send you the screen shot and all u2018zu2019 programs are in display mode which I want to be in change mode that is also not possible. Please guide me to proceed.

Rahul,
You will require to Change the Maintenance system for the Object.
Follow below steps:
1) Go to Transaction SE03
2) Select the option "Object Directory" -> "Change Object Directory Entries of Objects in a Request"
3) Put the details for Package, person Responsible and original system of the Object
Change the system and save the entry. This activity will not generate the TR.
Hope this helps!
Regards
Shital

Not able to import transport request in A66

Hi Expert,
I have done an amendment via t.code OBR3 in N66 so created a transport request. I went to SE01 to release the transport request and I saw the status is released and the is a warning message "Import steps not specific to transport request". I logged on to A66 and go to STMS_IMPORT but I could not find my transport request to import it into A66. Did I missed out anything? Have I done anything wrong?
Kindly advise.. thanks

hi
sometime it happens recreate the transport request and try to re-import it may work.

Problem while Importing Transport Request

Hi Friends
We are trying to import a transport request, while importing abap dictionary objects, in the log it is showing not imported. we have tried the same request in other system, but it works fine there. Can you please anyone explain what may be the cause behind for this.
Regards
Praveen

Hi
Please find the log.
EXCLUDING        : 'R3TRVIEW','R3TRUENO','R3TRTTYP','R3TRTABL','R3TRSQLT','R3TRSHLP','R3TRMCOB','R3TRMCID','R3TRMACO','R3TRENQU','R
Data file is compressed with algorithm 'L'.
Export was executed on 25.07.2008 at 15:27:15 by unknown
620
with R3trans version: 26.02.07 - 15:37:00
Source System = PC with Windows NT on DBMS = MSSQL --- SERVER = 'ADAPSAPDEV' DBNAME = 'BI1' --- SYSTEM = 'BI1'.
language vector during export: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789abcdefghijklmnopqrstuvwxyz(),./:;
lsm during export: VECTOR
trfunction = K (transport to consolidation system)
Used Commandfile BI1K900524           (DEVELOPER1/125)
Target client in E070C updated (100)
0 entries for E070 imported (BI1K900524).
0 entries for E071 imported (BI1K900524          *).
     table TADIR: entry in DB is 2 bytes bigger than in file.
     ... ignoring such differences.
26 26
     table DD01L: entry in DB is 32 bytes bigger than in file.
     ... ignoring such differences.
     table DD07L: entry in DB is 1 byte bigger than in file.
     ... ignoring such differences.
LIMUDOMDZZSMBI_TESTSTATUS was not imported in this step
     table DD04L: entry in DB is 2 bytes bigger than in file.
     ... ignoring such differences.
LIMUDTEDZZMSBI_ABAPVERSION was not imported in this step
LIMUDTEDZZMSBI_BUGID was not imported in this step
LIMUDTEDZZMSBI_CODELINE was not imported in this step
LIMUDTEDZZMSBI_CONVEXIT was not imported in this step
LIMUDTEDZZMSBI_COUNT was not imported in this step
LIMUDTEDZZMSBI_DATAROW was not imported in this step
LIMUDTEDZZMSBI_DATATYPE was not imported in this step
LIMUDTEDZZMSBI_DATEFORMAT was not imported in this step
LIMUDTEDZZMSBI_DECIMALPOINT was not imported in this step
LIMUDTEDZZMSBI_DELIMITER was not imported in this step
LIMUDTEDZZMSBI_DESCRIPTION was not imported in this step
LIMUDTEDZZMSBI_FILENAME was not imported in this step
LIMUDTEDZZMSBI_FLAG was not imported in this step
LIMUDTEDZZMSBI_FUNCNAME was not imported in this step
LIMUDTEDZZMSBI_INDEX was not imported in this step
LIMUDTEDZZMSBI_INTTYPE was not imported in this step
LIMUDTEDZZMSBI_LANG was not imported in this step
LIMUDTEDZZMSBI_LANGUAGE was not imported in this step
LIMUDTEDZZMSBI_MODE was not imported in this step
LIMUDTEDZZMSBI_MSGCLASS was not imported in this step
LIMUDTEDZZMSBI_MSGDATE was not imported in this step
LIMUDTEDZZMSBI_MSGID was not imported in this step
LIMUDTEDZZMSBI_MSGTEXT was not imported in this step
LIMUDTEDZZMSBI_MSGTIME was not imported in this step
LIMUDTEDZZMSBI_MSGVAR was not imported in this step
LIMUDTEDZZMSBI_NEG_ON_RIGHT was not imported in this step
LIMUDTEDZZMSBI_OBJNAME was not imported in this step
LIMUDTEDZZMSBI_OPTION was not imported in this step
LIMUDTEDZZMSBI_OUTPUTLEN was not imported in this step
LIMUDTEDZZMSBI_SEVERITY was not imported in this step
LIMUDTEDZZMSBI_SHORTCOUNT was not imported in this step
LIMUDTEDZZMSBI_SIGN was not imported in this step
LIMUDTEDZZMSBI_TABLECLASS was not imported in this step
LIMUDTEDZZMSBI_TAGNAME was not imported in this step
LIMUDTEDZZMSBI_TAGTYPE was not imported in this step
LIMUDTEDZZMSBI_TESTID was not imported in this step
LIMUDTEDZZMSBI_TESTOBJNAME was not imported in this step
LIMUDTEDZZMSBI_TESTSTATUS was not imported in this step
LIMUDTEDZZMSBI_VAR was not imported in this step
LIMUDTEDZZMSBI_VIEWCLASS was not imported in this step
LIMUDTEDZZMSBI_WHERESTRING was not imported in this step
LIMUDTEDZZMSBI_WHERE_LINE_46C was not imported in this step
LIMUDTEDZZMSBI_WHERE_OPERATOR was not imported in this step
LIMUDTEDZZMSBI_WHERE_VALUE was not imported in this step
Start import LIMUREPSZZMSBI_EXTRACTCODE_TEMPLATE ...
1 entry for TADIR updated (R3TRPROGZZMSBI_EXTRACTCODE_TEMPLATE             ).
0 entries from SMODILOG (PROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (CVPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (CUPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (PRPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (SVPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
0 entries from SMODISRC (CIPROGZZMSBI_EXTRACTCODE_TEMPLATE             REPSZZMSBI_EXTRACTCODE_TEMPLATE
REPOS ZZMSBI_EXTRACTCODE_TEMPLATE              A replaced.
report ZZMSBI_EXTRACTCODE_TEMPLATE              (L) synchronized.
169736 169762
1 entry for TRDIRT updated (ZZMSBI_EXTRACTCODE_TEMPLATE             *).
End of import LIMUREPSZZMSBI_EXTRACTCODE_TEMPLATE
     table DD03L: entry in DB is 4 bytes bigger than in file.
     ... ignoring such differences.
LIMUTABDZZMSBI_ABAPCODE was not imported in this step
LIMUTABDZZMSBI_CONVERSION_FIELDS was not imported in this step
LIMUTABDZZMSBI_CONVERSION_METADATA was not imported in this step
LIMUTABDZZMSBI_DATAOBJECT was not imported in this step
LIMUTABDZZMSBI_DATATABLE was not imported in this step
LIMUTABDZZMSBI_DD02V was not imported in this step
LIMUTABDZZMSBI_DD03P was not imported in this step
LIMUTABDZZMSBI_DD05M was not imported in this step
LIMUTABDZZMSBI_DD08V was not imported in this step
LIMUTABDZZMSBI_DD09L was not imported in this step
LIMUTABDZZMSBI_DD12V was not imported in this step
LIMUTABDZZMSBI_DD17V was not imported in this step
LIMUTABDZZMSBI_DD26V was not imported in this step
LIMUTABDZZMSBI_DD27P was not imported in this step
LIMUTABDZZMSBI_DD28J was not imported in this step
LIMUTABDZZMSBI_DD28V was not imported in this step
LIMUTABDZZMSBI_FIELDS was not imported in this step
LIMUTABDZZMSBI_JOINCONDITION was not imported in this step
LIMUTABDZZMSBI_KEYFIELDS was not imported in this step
LIMUTABDZZMSBI_LOGMESSAGE was not imported in this step
LIMUTABDZZMSBI_RANGE_CONVEXIT was not imported in this step
LIMUTABDZZMSBI_RFCRETURNMSG was not imported in this step
LIMUTABDZZMSBI_TAG_DIRECTORY was not imported in this step
LIMUTABDZZMSBI_UNITTESTRESULT was not imported in this step
LIMUTABDZZMSBI_WHERE was not imported in this step
LIMUTABDZZMSBI_WHERE_CLAUSE_46C was not imported in this step
LIMUTTYDZZMSBI_T_ABAPCODE was not imported in this step
LIMUTTYDZZMSBI_T_CONVERSION_FIELDS was not imported in this step
LIMUTTYDZZMSBI_T_CONVERSION_METADATA was not imported in this step
LIMUTTYDZZMSBI_T_DATAOBJECTS was not imported in this step
LIMUTTYDZZMSBI_T_DATATABLE was not imported in this step
LIMUTTYDZZMSBI_T_DD02V was not imported in this step
LIMUTTYDZZMSBI_T_DD03P was not imported in this step
LIMUTTYDZZMSBI_T_DD05M was not imported in this step
LIMUTTYDZZMSBI_T_DD08V was not imported in this step
LIMUTTYDZZMSBI_T_DD09L was not imported in this step
LIMUTTYDZZMSBI_T_DD12V was not imported in this step
LIMUTTYDZZMSBI_T_DD17V was not imported in this step
LIMUTTYDZZMSBI_T_DD26V was not imported in this step
LIMUTTYDZZMSBI_T_DD27P was not imported in this step
LIMUTTYDZZMSBI_T_DD28J was not imported in this step
LIMUTTYDZZMSBI_T_DD28V was not imported in this step
LIMUTTYDZZMSBI_T_FIELDS was not imported in this step
LIMUTTYDZZMSBI_T_JOINCONDITION was not imported in this step
LIMUTTYDZZMSBI_T_KEYFIELDS was not imported in this step
LIMUTTYDZZMSBI_T_MESSAGE was not imported in this step
LIMUTTYDZZMSBI_T_OBJECTMETADATA was not imported in this step
LIMUTTYDZZMSBI_T_RANGE_CONVEXIT was not imported in this step
LIMUTTYDZZMSBI_T_RFCRETURNMSG was not imported in this step
LIMUTTYDZZMSBI_T_TAGTYPE_LIST was not imported in this step
LIMUTTYDZZMSBI_T_TAG_DIRECTORY was not imported in this step
LIMUTTYDZZMSBI_T_UNITTESTRESULT was not imported in this step
LIMUTTYDZZMSBI_T_WHERE was not imported in this step
LIMUTTYDZZMSBI_T_WHERE_CLAUSE_46C was not imported in this step *
Can you please reply me asap.
Thanks and Regards
Praveen

Importing a transport request

Hi Expert,
In our Transport landscape some one has released a transport for QA system but the request is not reflecting in Import Queue of QA system.
Can some one advise how to import the request in QA.
Thanks
Kundan

Hi,
There might be some problems at OS level of Dev/Qua system and check the Co and Datafiles. Now execute Tcode STMS_IMPORT in Qua system. and goto following location from menu bar:
Extras-> Other Requests -> Add
Now give the Transport Request No. and Target Client.
This will add the Transport request into Import Queue of Qua system, now u can import the request.
Hope this will solve your query.
Regards
Lokendra

How to find out which User id used to import Transport Request thru STMS ??

Dear Experts we have 6 BASIS Consultants in our org with STMS authroizations.
In every day we review Imported Transport request thry Import History Option in STMS.
Our requirement is which request is imported by which BASIS Consutlant thru STMS?
Thanks for your replies in advance
Regards

Hi,
You should be able to see the "owner" of a transport request under the import history in STMS. If you need the user too you can choose the menu "Edit --> Display More".
Best Regards,
Srividya.R

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Importing Transport requests

Hi,
When i click on import transport request to import the request to target system (DEV to QTY) ,what process will be happen in background.
Thanku

This is a very basic question and can be easily answered by doing some reading and research on your own.
Please read the "Rules of Engagement".

Import Transport Request

Hi,
When i click on import transport request to import the request to target system (DEV to QTY) ,what process will be happen in background.
Thanku
Edited by: d pavani on Jan 24, 2011 10:18 AM

> When i click on import transport request to import the request to target system (DEV to QTY) ,what process will be happen in background.
- the system starts "tp import <transport> pf=<transport profile>"
- tp calls R3trans
- R3trans triggers an event in the system to start postprocessing
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
Markus

Transport Request Management(Import log)

Similar Messages

Maybe you are looking for