Transport request problem with an include prog ... not working

Hello people I am in a predicament here. I have this SAP Enhancment program with a screen and include code
<b>screen:
SAPLITO01080_XUSR1080_SAPLXTOB1000
include:
ZXTOBI01</b>
right now it can be found either in the function grp XTOB or a project made by us (can be found in CMOD).
When I released the Transport Request with both of the above included. The screen SAPLITO01080_XUSR1080_SAPLXTOB1000 was sent to the prd server but the include code ZXTOBI01 didnt. I tried saving and creating a transport while editing it in XTOB and my project (ZPMTECH), and it still wont work. If any of you can give me some help regaring this I would be ever greatful. Thanks guys and take care.

<b>"Try to see the code of your user exit in PROD, it seems the statament INCLUDE ZX...... is missing."</b>
This is in DEV: In the SAP Enhancments ZPMTECH, the thing is here is that my enhancment comes from a screen. So I just add modules and click on the module and created an enhancment. the include code cannot be seen in ZPMTECH but it can be seen in the function XTOB. However in PRD XTOB does not have the include program nor the modules, but has the screen.
<b>"In your request there should be only the include, not function (user-exit)."</b>
That is how I have transporting it, still doesnt work unfortunatley.
Thanks.

Similar Messages

  • Has anyone had a problem with the spotlight search not working sometimes?

    Has anyone had a problem with their "spotlight search" not working? If I restart the phone it will work for a few days then not work again.

    It's more likely the OP's router.  I have a wifi only iPad 2, yet location services work just fine on my iPad.  If I open maps, my location is found quite nicely.  I have seen that some routers do not provide location services and I suspect the OP has such a router.

  • I am having real problems with my hotmail account not working on my iMac

    I am having real problems with my hotmail account not working on my IMac but works absolutely fine on my Iphone 5. Can anyone help with the setup for iMac. I am with BT for my Broadband. I am cionverned if I route my Hotmail accoutn to GMail will iy stop working on my Ipone.

    How are you accessing Hotmail?  Via your web browser?  Are you using Apple Mail?  Outlook?
    The answer will be different depending on how you want to access Hotmail.
    If you are using an email client (like Apple Mail, Outlook, Entourage, etc.)) then you need to set up a mail account in your email software.
    The incoming Hotmail settings are these:
    Incoming server: pop3.live.com
    User name: Your full Hotmail email address (aka "me @ hotmail.com" or "me @ live.com")
    Password: Your Hotmail password
    POP port: 995
    Use SSL to connect : yes
    The outgoing Hotmail settings are:
    Outgoing server: smtp.live.com
    User name: Your full Hotmail email address
    Password: Your Hotmail password
    SMTP port: 587 (override the default port if necesssary)
    Use SSL to connect : yes

  • Transport request problem with a ztable

    Hello,
    I have some problems releasing a customizing transport request. It contains "table contents" of a z table. This z table is marked as "customizing table" (option C).
    Error message is "task desk900213 belongs to a different category"
    Thanks.

    Hi Alberto,
    What type of request are you using. Also let me know the classification of task.
    I mean if you a workbench request is giving this error then try using a customising one and if a customising one is giving this error try using workbench transport.
    I guess this is related to the thread:
    Re: change object transport order
    Also I hope you have assigned a development class to the Z table.
    Please award points accordingly.
    Regards.
    Ruchit.
    Message was edited by:
            Ruchit Khushu

  • Problem with various programs freezing/not working

    I'm not sure if it's a problem with the computer itself or with the software, but perhaps someone on here can help me.
    For about a week now I've been having problems with various programs on my iMac. These programs include iTunes, Force Quit, Shut Down, Safari, Finder, and certain functions on the keyboard.
    The problems I've been having revolve around the programs freezing up when you either first try to operate them or after opening the programs and trying to click on things within the program itself.
    A good example: I haven't been able to use iTunes past the point of opening it up. Once I try to play a song, it freezes up and the rainbow wheel comes up and just keeps on spinning for eternity, or until I manually reboot the computer via the power button.
    The volume controls on the keyboard don't work at all. When I first boot up the computer, I can press a volume button and the symbol will appear on the screen, but the level won't move up or down and if you press it again after that disappears then it doesn't reappear.
    Force Quit and other applications tend to stay on the screen after you click the quit button or other end/cancel button and won't go away until iMac is rebooted manually by button on back.
    Safari gets stuck on occasion depending on which site I go to. It happened once when I went to MySpace.com, but only cos of one of the flash sites they were advertising. I went to the same site an hour later and it was fine since it was advertising something else. I have a job site I can't access because when I click on the 'jobs' link to look for a job, it gets 3/4 of the way through the upload and freezes.
    And right now I can't tell you which model I have since I can't access the 'About This Mac' info, other than to tell you it's the 20" with 320 GB with Leopard software, Mac OS X v10.5. It gets regular updates.
    So... if there's anyone who could help me, I would greatly appreciate it.
    Please note, I don't have Apple Care since I can't afford it yet, and I just bought my computer in October 2007. Thanks!

    Start with http://www.thexlab.com/faqs/multipleappsquit.html

  • ADOBE BRIDGE SAYS HAVE PROBLEM WITH CACHE.  WILL NOT WORK AND I TRIED TO GO TO

    DownLoaded yetserday 2200 new pictures into my mac book por.
    now adobe bridge freezes up and says error in cache settings.
    but when i attempt to open preferences, and clear out cache, it does not work.@

    hnz5758 wrote:
    i attempt to open preferences, and clear out cache, it does not work.@
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • Problem with 23 inch, basically not working...need advice

    Hi, I have had the 23 inch for a couple of months and one day, it stopped working as usual. For the most part, when you turn the computer on, the monitor will 50 % of the time turn on, 50 % not. If it does turn, as soon as the computer turns the monitor to sleep, it will 10 % of the time turn on, 80 % not turn on again at all until the computer is turned off (and sometimes this does not help and all you can do is try the next day), and 10 % flicker and image of the screen. I have deleted the plist files, created new profiles, tried other macs, reset logic board and video ram with no help. The only way to get the monitor to turn back on (and this does not work all the time) is to unplug the monitor from the power block and plug it back in. You will have to do this several times for it to work, and then the monitor will work fine until either the monitor goes to sleep or the Mac. I have taken the monitor to the Apple store and it turned on for them so they told me to get lost. It looks like this is going to be something I need to figure out first or wait until it never turns on again...which should be soon at the rate it quits. Any advice or no what is wrong so atleast I can tell them at the Apple store (after I make the 400 mile trip there)? I originally thought it was the power supply but after trying another one at the store, mine worked too. Its not the power mac because I tried it on my powerbook and it doesnt work either. By the way, this all started once I plugged it into my powerbook for the first time. Its getting irritating trying to turn it back on when I am doing work... Please help!

    Probably, the dropping caused a serious problem on the hard drive of your iPod. See doing the following helps ..
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”

  • IDVD 08 - problem with scene selection tabs not working after "burn"

    I have a movie that is about an hour long (made in iMovie08 using mostly still photos). I wanted to have "chapters" -- but with that option gone, I used the Scene Selection option in iDVD08. This created menus with 15 scene selection buttons (I chose every 4 minutes). The menus were automatically created by iDVD and I did nothing to change them, except to type in scene info (two-three words).
    The buttons all worked fine on the computer, and I burned a DVD. The DVD worked great in my VCR player. I'd select Play Movie and it would go. I'd select Scene Selection and I'd get the menus for that. But when I'd highlight one of the scene selections and "enter" (select) -- it wouldn't go to that scene. I could go back and forth between menus, and could move around and highlight the scene buttons, but selecting would not start the scene to play. The movie played fine from start to finish, and the other remote features worked (stop, pause, menu, etc.).
    I went back to iDVD and chose a different theme (thinking maybe I'd inadvertently done something to mess things up. The only thing I did differently in addition to the new theme, was to add two small movie clips - and I rearranged the buttons on the menu (dragging) to get them positioned where I wanted them. So my first menu says "Play Movie". The second menu has: Play Movie, Scene Selections, Little Movie 1, Little Movie 2. Everything worked greated in iDVD. Then I created a disk image to view using DVD Player (rather than waste another DVD). Same problem -- only worse. This time I couldn't even highlight Scene Selection to get to the scenes' menus.
    Any thoughts on why I'm not able to get the "Scene Selection" buttons to work after a burn? Am I missing a step somewhere in iDVD?
    Thanks.

    I am not sure, but does your post concerning the problem, that all Remote Control function will work properly within iDVD'08 but after burning the DVD absolutely not with the RC of your set top DVD player connected to your TV?
    If this is it:
    Meanwhile I could figure out - after many nights of not been very productive and only working out on all the iDVD'08 problems - that **ALL** of the *7.0 Themes* have a major problem in generally.
    The following points are concerning iDVD'08 using any of the 7.0 Themes:
    - Complete deep freeze of your Mac under Leopard when rendering/coding/burning a movie which has chapters and you use movies instead of still images in drop zones. (LeopardiDVD087.0Themes)
    - Functions on remote control of your set top DVD player are not working correctly when making a movie with chapters. This is generally on Tiger and Leopard the same problem using iDVD08 with any of the 7.0 Themes.
    Quick and dirty workaround:
    You may avoid this if you simply use a 6.0 Theme or lower version of the Themes.
    But this is of course not the clue...
    It is VERY DISAPPOINTING, having software at such a low quality level deliverd by Apple. And somehow it looks like they DO NOTHING against it. No statement, no excuse, they really remain silent.
    This may also be a thread you could be interested in:
    http://discussions.apple.com/thread.jspa?threadID=1203323
    Cheers,
    Roland

  • Problems with lost bookmarks, keypad not working, apps shutting down

    Out of the blue, while I was still using Safari, all my bookmarks disappeared. No matter how many times I tried to add a bookmark it doesn't show up on my Bookmarks tab. I've tried adding a new folder on my bookmarks tab but it doesn't work either. I don't know what's going on. I've already reset my iPhone once because there were so many problems after I downloaded iOS4.
    Also, I don't recall seeing "History" under the Bookmark tab but now it's there. The History option (along with the websites, etc.) comes and goes. Even after I delete everything from the Settings app, the history still shows up afterwards.
    Any help or suggestions would be appreciated. If I absolutely need to (again), I'll reset my iPhone. I honestly didn't think I was going to have this many problems with iOS4. Everything was perfect before I downloaded the new operating system. I'm also experiencing other problems with iOS4 such as the keypad not working during a phone call and apps shutting down multiple times. Again, any help or suggestions would be great.

    it just sorta started working again

  • Is anyone else having problems with the overdrive app not working right after new apple update

    I am having problems with the overdrive app.  I am only allowed to read about twenty pages of a book and then it tries to load more pages but does not.  I have reinstalled the app but have the same problem. Any ideas.

    Have to talked to the developer? Gone to their site? Do they have an update out for the newer OS?

  • When is Apple going to fix the problem with external hard drive not working on Lion?

    As for everyone else external hard drive does not work with Lion.
    When will Apple fix this problem. Do they just ignore the customer : (

    Copy off all your data off the NTFS formatted drive to another drive
    Open Disk Utility in the Applications>Utilities folder
    Select your external NTFS drive on the far left,  should have the drive makers name, a ID perhaps plus the word "media"
    Click the Partition Tab, click the big box and click 1 Partition
    If you want a Mac only drive > Option: GUID >format OS X Extended (Journaled)
    If you want a Mac/PC drive (for over 4GB sized files) > Option: MBR > format exFAT
    If you want a Mac/PC drive (for the most compatibility with other devices, Win XP, but only under 4GB sized files) > Option: MBR > format MSDOS (FAT or FAT32)
    Give it a name and click Apply.
    You can also search Microsoft for a free exFAT download if you have Win XP.
    https://discussions.apple.com/message/16276201#16276201

  • Having problem with iPad 2 sound not working

    I can plug in my head phones and sound is fine when I unplug there is no sound.
    - I have checked rotation no problems there
    - I have double clicked home button and scrolled over the mute button is not the issue but I realized I do not have a volume glider on the right hand side unless I have headphones in.
    - any suggestions?

    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • I have big problem with battery, It's not working good just two hours and stop without any warning when the battery in 50% then reach 30% in the same moment, then the iphone stopped,what I can do for that and I live in Egypt???any help

    My Iphone 4 is very good until last Thursday, I used it from sep 2011 without any problems, My problem is the battery is down without any warning and working after 100% then 82% then 50% then 30% and down these things throw less than two hours
    what can I do with that??
    Also, I live in Cairo,Egypt
    waiting your recommendations

    Hi,
    "But it didn't work it's just turning them to black gray scale colors not what i was thinking about."
    If you want it to be colored, you'll need to create a color-palette for the 8bppIndexed bitmaps. The keyword for this process is "Color-Quantization".
    The whole yellow-green pie you get is from the wrong format. If you convert the 32bpp bitmaps to 24 bpp bitmaps, you loose the alpha channel ("transparency"). You can manually set one color to "transparent" with the mMakeTransparent-method
    of the Bitmap class, or simply use gif-images (they are 8bpp with a transparent "key"-color)
    Regards,
      Thorsten

  • Problems with swiping, highlighting text, not working properly

    Hello and new to forum as well as new to BB10. I have the Q10 model and really like it alot. However, these swiping techniques or gestures have me puzzled. Sometimes they work, and most times I find myself swiping the hell out of the screeen out of aggravation. Is there any way this can be tested as to working properly since it is a touch activated control?
    I really find myself swiping three times, 5 times or more, just to get to the hub. I cannot close out a screen with one swipe. It will not copy test without repeated taps. The circle pointer is hard to get on. I realize my swiping is a new technique to me, but could it be the protective cover that was put on it? Can anyone help me try to fix this very annoying problem as I am not used to repeated attempts at trying to do something so simple as closing a program or moving to another location tab. I sure would appreciate it.
    Thanks in advance.

    Hello greg30
    Welcome to the BlackBerry Support Community Forums.
    Sorry to hear you are having issues with your BlackBerry Q10 smartphone navigational gestures. Please view the follow link as it takes you to a "BlackBerry Q10 Gestures Overview".
    The screen protector is some cases can effect the gesture input on the BlackBerry Q10 smartphone screen. This is simply due to the increased thickness of the scratch resistant liner on the touch screen.
    Goose947
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Problem with audio output device not working

    Okay about a week ago, i came home from work, booted up my laptop and noticed that the hp quicktouch program failed to start. Then I also noticed a red X over my sound icon on my taskbar. So i thought it might have been an error of some sort and rebooted. When I did that everything came back up find, but when I started playing a game, I noticed the sound went out again... I closed the game and went into the device manager. But as soon as I closed the game out the sound fixed itself... So i started the game back up and about 10 mins in it went out again... So I went back into device manager, scanned for hardware changes and it seems to be working find, so i reinstalled the game thinking that could be the problem.
    Well when I rebooted my laptop i got the error again about quicktouch and the red X over my speaker icon. I went back into device manager to find that my sound, game controller device and driver is not even listed...
    Ive been looking around for a fix to this problem, but could not find any solution. So today I reinstalled windows again, but no sound, no driver, or anything is showing up. I really dont know what to do to fix this, people say download drivers and ive tried that, nothing is seeming to work.
    If anyone knows what I can do to fix this please inform me, the only thing else I can think of is go MAC lol.
    Oh btw, im running a HP Pavilion Entertaiment PC (dv9700). It has windows vista 64 bit.
    Thanks in advance.

    use stystem recovery and lose all files, photos, games and all settings - that the best way ....
    use device manager to reinstal sound driver, but try to install diferent versions of it, after update (made by hp update) i had no sound, installing older ver help
    sorry for my poor english
    Hp Pavilion dv6408nr - Vista
    external HDD - ubuntu

Maybe you are looking for