Transport Request's stuck with TRUCK symbol - very Urgent

Hi All,
I am in the process of Importing 450 transport request's. I have imported 190. While importing next 30, it stucks at importing stage with TRUCK symbol.
Please suggest, how to overcome it or how to reset the tp.
Thanks,
Arjun

Hi Arjun,
There me be various aspects of your transport being stuck. Just ensure the changes in the Transport Request are not big before taking any action. Please be informed that if you are canceling this in the middle in particular if the transport request holds some table structures, the system may mal-function. So please discuss with your development team about the same. You may need to revert the minor changes done by the transport.
1. Check for the table spaces, if any of them are full add some more space. As the transports may have stuck for the same and may go through.
2. Check if enough background process are free in SM50 for the transport jobs to run. You can check for the transport jobs status in SM37 by giving RDD* as the Job name. Look out for any of the Job over running or is in waiting status. Looks out for some remedy there. You can cancel the transports by canceling these active jobs in SM37 or in SM50.
Hope this will help. <b>Please be careful if you are really need to cancel the jobs. As I have mentioned at the beginning</b>
Regards,
Sanujit

Similar Messages

TS1702 I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!

I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
Please help!!!!

You dont have any data on your phone yet right?
If you dont connect your device to the computer and
Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
after that try again

Iphone stuck with apple symbol and wont start up

i updated my iphone and when it finished and went to reboot it just stays stuck on the apple symbol it constantly reboots and will never connect to my laptop i dont know what to do if anyone can help please do

Hi,
Luca224 & Ingo2711. Thanks for bringing this topic. on 29th Nov. I faced the same problem on my iPhone 3GS 32GB Firmware 3.1.2, iPhone stuck with apple symbol and wont start up. I have tried with 10 Seconds Sleep/wake-up button + home button to reset. But didn't work. Did google about an hour with many blogs. Finally I made a call to 3 iPhone care and spent 30 minutes and explained whatever I have done; iPhone customer care asked me to go to nearby iPhone service center in Sydney. BUT BY LUCK CLICKED ON iTUNE AND GOT THE OPTION FOR ONLINE FORUM FOR APPLE iPHONE. Many many thanks to Ingo2711 who has given the solution link and also thanks to Luca224 , who raised the issue. I feel, this is a common problem with iPhones those who using iPhone 3GS 3.1.2...... but try the link http://support.apple.com/kb/HT1808 and thanks to Luca224 & Ingo2711. PLEASE FOLLOW THE INSTRUCTION CAREFULY:
1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
2. Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off. _+(in my case - red slider didn't appear, but i pressed the Sleep/Wake button until the iPhone went off, finally it was just off... i was frustrated... tried 3 times with more patience )+_
4. Press and hold the Home button while reconnecting the USB cable to iPhone. When you reconnect the USB to iPhone, the device should then power on. +_( Do exactly as it says)_+
Note: If you see the message "Charging... Please Wait" or you see the screen pictured below, let the device charge for at least 10 minutes to ensure the battery has some charge and then start with step 2 again. +_(True ... for me it happened 3 times)_+
5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. +_( I was nearly frustrated at my 3rd attempet; my thumb was hurting as I was holding the home button for few minutes..... but finally it worked yahooooooooooooooooo...... suddenly changed my decision.... about going to 3/Apple service center)_+
6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
If you don't see the "Connect to iTunes" screen, then disconnect the USB cable from iPhone and repeat steps 3-6.
Because you must restore iPhone or iPod touch, iTunes will not recover data from the device, but if it was previously synced on the same computer and the same user account, it should restore a backup (if available). See document HT1414, "Updating and Restoring iPhone Software."
If you are still unable to restore the iPhone using this method, check Apple support for further troubleshooting and/or service options.
Note: If you sync both an iPhone and an iPod touch to the same computer, make sure you select the correct backup to restore your settings from (don't select an iPhone backup if you have an iPod touch and don't select an iPod touch backup if you have an iPhone).
**** ( BACKUP FROM YOUR iTUNES : MAC/PC; AS I GOT MY 95% DATA FROM THERE.... GOOD LUCK)******* IF IT WORKS PLEASE POST YOUR EXPERIENCE....*
THANKS

While updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

while updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

- What was the error message?
- Try closing iTunes and then disconnect the iPod from the computer. Then reconnect the iPod. If the iPod shows in iTunes then you can try again. However, You should try to resolve the error message first.
- If iTunes does not see the iPod try reetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- I recommend that you come back with the what the error message said and the condition of the iPod and if it is visible in iTunes.

STMS: Transport Requests Forever Stuck to Running

Dear SAP Friends,
I am faced right now with a big problem with importing transport requests on our PRD instance.
The TRs are forever stuck on running (truck icon status). I've already edited the tables TRJOB and TRBAT in SM30 but to no avail.
I also checked the tp logs and did some isolation.
Would there be other workarounds? I've already restarted all our instances but I still got the problem.
Hope somebody can help me. Thank you very much in advance!
Best Regards,
Albert

This is happening because import queue is inconsistant
SAP NOTE 12746
check TP SLOG
TP SLOG : TP System logs
STMS > import overview > goto > tp system log (tp slog) : u can find the location of <SID>.LOB file
kill all the Tp process running from the os level and then
delete QE1.LOB
check out for *.LOB file in the DEV system as well
in stms u can see import monitor and keep the cursor on active transport request and delete. This is under import monitor, it does same thing as ps -ef| grep tp and kill pid
Try to do tranport from OS level using TP command
Tp ADDTOBUFFER <TR> <SAPSID>
tp IMPORT <TR>|ALL <SAPSID> http://options ...
check out entries from tables TRBAT, TRJOB & TMSTLOCKR . Use SE16 to delete the entries or use sqlplus (delete * from sapr3.TRBAT and delete * from sapr3.TRBAT)
also checkout if the TMS job is running or not : recreate RDDIMPDP job
Sapnotes concerning this topic or related to this topic:
818065, 302859, 556941, 556946, 71353, 49242, 323726, 56311, 24800, 486991, 506771, 138200

Move Transport request to target with different Sps

Hi All,
This is a very basic question. Just want to clear myself.
We have released some transports after applying NW 700 Ehp1. Can we move these transport to systems with NW 700 Sp16 (ie, w/o Enhp1) ?
Thanks!

Hi,
Such transports are technically possible, but inconsistencies can occur between the versions of the transported objects.For example if you first import the Support Packages in the development system and then change an object with a transport request, the version of the transport request is valid there.If you first import the transport request in the subsequent system and then the Support Packages, the version of the Support Packages is active there.
Jusy giving another small illustration
As an example, your development system is running a higher support package level then your acceptance and/or production. If an ABAP developer creates or modifies a function which uses functionality (pieces of code) brought into the system by a support package which is not available in the acceptance or production system, this function is no longer going to work after it has been transported to those systems.
THanks Debdeep
Edited by: Debdeep Ray on Jul 18, 2009 5:53 PM

Transport request failed; recollected with new TR;what happens to first one

Hi,
I released a transport request and requested that the request be transported to the testing environment.
I received a message from Basis that the transport failed. I suspected that it might fail because I say many duplications in se09.
To fix this problem, I basically recollected the objects carefully and under a new transport request number; and released it.
I have requested that the Basis team move the new request to the testing environment.
1. What is wrong with what I did?
2. If the second request successfully gets moved to the testing environment, what becomes of the first request which was released, therefore no more available in development for me to delete? I tried to delete it under the "Released" section in se09 but got a message that it is not available to delete.
3. Could I have used the same Transport Request number the second time around, although the first number had been previously released?
Thanks

1. What is wrong with what I did?
It depends, did you check the Log.
Log should tell you why it failed or atleast give you some hints.
Ex : Missing objects ..might have been locked in an other request.
2. If the second request successfully gets moved to the testing environment, what becomes of the first request which was released, therefore no more available in development for me to delete? I tried to delete it under the "Released" section in se09 but got a message that it is not available to delete.
If the second request contains similar objects to the ones in first, everything will get overwritten in the target system.
TR1 - 10 Objects
If TR1 returns RC=8 due to one object, 9 objects will be successfully transported. You may only transport the failed one in the next request with its corrections.
3. Could I have used the same Transport Request number the second time around, although the first number had been previously released?
Yes, same released request can still be imported more than once but it may result in the same.
Try to find the reason the request failed, accordingly add objects in the next corrected request.
You can also copy requests into an other.
RClick on the request - Include Objects ( Ctrl + F11 ) - Enter Request Name.

Transport request migration failed with return code 12

Hi ,
A transport request was created to capture deletion of bex query via Tcode RSZDELETE. The deletion TR was moved to Quality box successfully and query got deleted. But when same TR was moved to Production box, TR failed with return code 12. Program terminated (job:RDDEXECL). Upon checking the job log overview for this job, runtime error ITAB_DUPLICATE_KEY happend causing session to terminate. can anyone pls suggest me how to fix this issue and why this has caused. Need to fix this immediately as it is in production environment. Please help.
In ST22 i could see the below error details:
Thanks,
Vishnu

as per the dump, system is trying to insert a unique number which is already in the system. You sure the transport is only for deletion of the query? Can you please check the import logs in the test system and should tell you what action performed during import.

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

SQL Loader Oracle 10g problem in upload date with time data -- Very urgent.

Hi
I am trying to upload data using SQL loader. There are three columns in the table
defined as DATE. When I tried upload a data like this '2007-02-15 15:10:20', it is not loading time part. The date stored as 02/15/2008' only. There is not time on that. I tried with many different format nothing work. Can please help me ?
I have also tried with to_date --> to_timestamp it did not work.
The application is going to be in production, I cannot change DATE to TIME STAMP. This is very urgent.
LASTWRITTEN "decode(:LASTWRITTEN,'null',Null, to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:Mi:SS'))",
CREATEDON "decode(:CREATEDON,'null',Null, to_date(:CREATEDON,'YYYY-MM-DD HH24:Mi:SS'))",
LASTUPDATEDON(21) "decode(:LASTUPDATEDON,'null',Null, to_date(:LASTUPDATEDON(21),'DD/MM/YYYY HH24:MI:SS'))"

Your problem is most likely in decode - the return type in your expression will be character based on first search value ('null'), so it will be implicitly converted to character and then again implicitly converted to date by loading into date column. At some of this conversions you probably are loosing your time part. You can try instead use cast:
SQL> desc t
Name                                      Null?    Type
LASTWRITTEN                                        DATE
CREATEDON                                          DATE
LASTUPDATEDON                                      DATE
SQL> select * from t;
no rows selected
SQL> !cat t.ctl
LOAD DATA
INFILE *
INTO TABLE T
TRUNCATE
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
LASTWRITTEN
"decode(:LASTWRITTEN,'null',cast(Null as date),
to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:MI:SS'))",
CREATEDON
"decode(:CREATEDON,'null',cast(Null as date),
to_date(:CREATEDON,'YYYY-MM-DD HH24:MI:SS'))",
LASTUPDATEDON
"decode(:LASTUPDATEDON,'null',cast(Null as date),
to_date(:LASTUPDATEDON,'DD/MM/YYYY HH24:MI:SS'))"
BEGINDATA
2007-02-15 15:10:20,null,null
null,2007-02-15 15:10:20,null
null,null,15/02/2007 15:10:20
SQL> !sqlldr userid=scott/tiger control=t.ctl log=t.log
SQL*Loader: Release 10.2.0.3.0 - Production on Fri Feb 29 00:20:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 3
SQL> select * from t;
LASTWRITTEN         CREATEDON           LASTUPDATEDON
15.02.2007 15:10:20
                    15.02.2007 15:10:20
                                        15.02.2007 15:10:20Best regards
Maxim

Customer Service (CS) module integration with other modules VERY URGENT

Customer Service (CS) module integration with other modules like sd,mm,pm,fi
documentation very urgent please send to my mail id [email protected]

This is with regards to Integration of CS module with other modules:
CS is in very close integration with Plant Maintenance(PM), Sales and Distribution(SD), FI, MM, Costing (CO) and also PP and HR.
Incase you want to have resource related billing using DIP profile (PM) you must have Cost element and Service Products defined in MM etc.
Itu2019s a very vast area needs to be explored based on the requirement in CS module. Any further assistance needed pls let me know.l.

Problem with tiles ..VERY URGENT!

I have a problem using tiles.
I have a search page called search.jsp. It calls a searchResults.jsp page when user enters searchcriteria and clicks the search button. I want to have the results on the same page in the bottom part.
I tried using Struts tiles but I have to make it understand that my results should appear on the same page at the bottom.I could not figure it out.
Please help me out.Its very urgent.
Thanks

Sounds VERY URGENT to me....

Attempting safe boot--gray screen stuck with apple symbol--

So, left Imac on over weekend with Itunes playing in continuous mode--when I got home (about 36 hrs later) the screen was good but Itunes had locked up and was the Imac was making a stuttering sound (not like a hard drive clicking but like the songs were stuck). The mouse was frozen but the arrow was visible--only way I could get out was to use the power button to force it to shut down. Since then, I get the gray screen when it boots (not using any shortcut keys during reboot) and it sticks there with the eventual appearance of the perpetual spinning circle under it. When I boot using all the tricks I can think of, safe boot (hoping to get to safe mode) I get everything from a gray screen with the apple but w/o the spinning circle (that's from safe boot attempt) to choosing the drive to boot from which reveals a text message that instructs me to reboot and another effort gives a page long text of information that begins with "kernel fail" laid over a gray screen w/o the apple logo, and several other options result in the screen staying black. One screen asked me to type "mac-boot" and enter but nothing new happened. Once I got the screen to come up solid gray with a single black line (running the width of the screen horizontally) about 2/3 from the top of the screen. I have tried booting with every peripheral removed (even tried it with multiple keyboards and mice--even w/o a mouse and keyboard). Tried the PRAM and SMC. The dvd drive is non-functional and has been for more than a year--(different issue) it won't even open (it's the Imac with the pod base and 15 inch screen all in one look from a few years ago)--just wanted to let that be known because I can't put the OS disk in--it's been upgraded to Lion from the original Panther--I think?
Anyway, looking for solutions, ideas etc...Thank you.

I had that same thing happen to me when I was updating my iPhone to iOS 5! What I did was I just kept resetting and resetting and holding down the home and power buttons until 3 in the morning. (ok, maybe it was only midnight but it sure FELT like 3 AM!) Anyway, I would just keep at it until it decides it wants to cooperate. Mine eventually did.

Did a factory reset on my phone and the screen is now stuck with apple symbol

I have done a master reset/restore facoty settings on my iphone and am now stuck on a screen with the apple icon

I had that same thing happen to me when I was updating my iPhone to iOS 5! What I did was I just kept resetting and resetting and holding down the home and power buttons until 3 in the morning. (ok, maybe it was only midnight but it sure FELT like 3 AM!) Anyway, I would just keep at it until it decides it wants to cooperate. Mine eventually did.

Reg: XI_CMS Transports. I need this forum reply very urgent. Please help me

Hi! Gurus,
     This is Amar Srinivas Eli.I am workig on Production Support project. Herehave one doubt regarding CMS Servers
Actually according to my knowledge XI Content aca be transfered from DEV>QA>PROD XI servers using CMS transports right?
But for this Actually one CMS Server is enogh right? that means here XI DEV Server is X42
                      QA                X44
                      PROD           X46
For cms server link is [http://sapr3001.geips.ge.com:54200/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms]
but client is asking why we a re not able to access this
http://sapr3001.geips.ge.com_:54400_/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms for transporting XI content
I think he is thinking that like XI portals for CMS also there will be 3 individual cms links are there right?
But is it wrong or my argument is righ? at which my arguement is only one CMS Sever is enough that means one link is enough right?
NOTE::
Please provide exact CMS transport link procedure other that the linnk contaning "How To Transport XI Content Using CMS
Version 1.00 October 2005"?
here in this only one procedure is there I want an exact procedure of how to transfer SLD systems means business and logcal and software components from all DEV>QA>PROD?
I need entire produre of transfering Business systems?
Please Kindly guide me in step by step procedure regarding this with Screen shots so that it may be helpful to me.
Regards::
Amar Srinivas Eli.

Hi,
Only one CMS is required as correctly said by Raj.
For more information please refer the below links:
CMS transport method:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
     CMS for SAP Exchange Infrastructure:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
     How to handle Xi with CMS:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
     Configuration of CMS in Central NWDI & SLD to transport XI objects:
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
     XI Software Logistics Solution III: CMS:
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Thnx
Chirag

Transport Request's stuck with TRUCK symbol - very Urgent

Similar Messages

Maybe you are looking for