Transport request save problem

hi
we are using SAP ECC system. whenever i am doing some config changes and saves it system is asking for customizing request. when i give the request number and clicks on ok, system is taking me to solution manager login screen. how do i rectify that. is there any setting i need to deactivate/activate? please advise.
thanks

I believe if you go into transaction SM59 there should be RFC destinations named TMSADM@<servername> which connects the transport system.
Depending on your security requirements of your organization, you can use a system user to connect all the time by typing in the name and password then save it or use the "current user" button which will use the authorization of who is accessing the transport system.
Hope this helps!

Similar Messages

  • How can I check what kind of values does transport request saves?

    Dear All,
    I have changed the max.foregin exchange rate from 1% to 0% in company code global data and added a new error message 212 in work area F5. Then I transport it to QA system and PRD system.
    However in T001 table change log PRD, the address was said to be changed from a number to another number also. But I don't remember that I changed the address of a company code. And I was not able to find the value before and after the change. Do you know where I can find the address of the company code? I have tried to get address in company code global data but in the poped dialog neither of the values are found. It is strange that the addresses of other company codes in T001 are not changed.
    And in the transport request, the new number was not included. I don't very understand what kind of information was included but I know I did not change other config of the company codes.
    I have 2 questions
    1. Where I can find the address of a company code?
    2. How to see what information has been included in the transport request?
    Thank you in advance.
    Emma

    Hi Emma,
    How to see what information has been included in the transport request?
    Go to transaction code  SE10 and identify  your transport request then double click the left side you will be get tree.
    if you want you can doubleclick the tree again so that you can identify which configuration step you saved.
    Hope it is useful.
    Thanks,
    Haribabu

  • Will Transport Request have problem?

    Hi Experts,
    Please consider the below scenario.
    User A doesn't have authorization to activate a structure for extending standard SAP table.
    User B have access to activate the structure for extending standard SAP table.
    This is what i have in a Transport request.
    TR1 (User A)
    -->Task1 (User B)
    User B activated the structure to extend standard SAP table in the Task1 (which is under TR1 of user A).
    When the TR1(User A) is moved to other server, Does the standard SAP table be extended?
    Note : User A doesn't have authorization to active the structure to extend standard SAP table.
    I believe the TR will be moved successfully to other server and standard SAP table will be extended even the TR is created by User A who doesn't have authorization to extend SAP table.
    Please advice << Removed >>....
    -RK
    Edited by: Rob Burbank on May 14, 2009 5:01 PM

    My usual reply to such questions is: try yourself and please let us know the result!
    My guess is: yes it will be appended, because the change was obviously done by somebody with the appropriate authorization, the outer transport request is just a vehicle to move the changes, and the import is  likely done via the DDIC user which should have SAP_ALL or similar authorization.
    Thomas

  • Transport request problem

    Hi all,
    when releasing the transport request from developement client subrequest is released properly but when released the main request getting the error
    " Test call of transport control program (tp) ended with return code 0232
        Message no. TK094
    Diagnosis
        Your transport request could not be exported, since all requirements
        were not fulfilled.
        Calling the transport control program tp
           "tp EXPCHK DEVK904964 pf=/usr/sap/trans/bin/TP_DOMAIN_PRD.PFL
        -Dtransdir=/usr/sap/tr"
        which checks the export requirements, returned the following
        information:
        Return code from tp:    0232
        Error text from tp:     ERROR: Connect to DEV failed (20071030084950,
        prob "
    can anyone suggest about this.
    thanks in advance .
    sk.

    Hi SK,
    As the transport log itself saying that the connection to development failed. There may be some connection issue in STMS. Ask your basis if there is any problem.
    Regards,
    Atish

  • Transport request problem with a ztable

    Hello,
    I have some problems releasing a customizing transport request. It contains "table contents" of a z table. This z table is marked as "customizing table" (option C).
    Error message is "task desk900213 belongs to a different category"
    Thanks.

    Hi Alberto,
    What type of request are you using. Also let me know the classification of task.
    I mean if you a workbench request is giving this error then try using a customising one and if a customising one is giving this error try using workbench transport.
    I guess this is related to the thread:
    Re: change object transport order
    Also I hope you have assigned a development class to the Z table.
    Please award points accordingly.
    Regards.
    Ruchit.
    Message was edited by:
            Ruchit Khushu

  • Problem of calling BAPI to release transport request

    Dear Friends,
    I want to automatically release Transport Request using BAPI (BAPI_CTREQUEST_RELEASE), but I met a difficult during the process that only TR TYPE 'K'or 'W' can be release using this BAPI, if I create an addon program which TR Type is 'S' (stand for Development/Correction), then this BAPI does not work. 
    BTW, you can refer table E070.
    Could you please kindly give me some idea to solve this problem?
    Thank you in advance.
    Best regards,
    Nick

    Dear Li Nick,
    The reason that you cannot release a request of type 'S' is that type 'S' names a local correction, which cannot not be transported (and therefore of course not released).
    Regards, Tino

  • PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

    Dear all,
    I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
    I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
    Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
    Helpful contribution will be duly rewarded.
    Thanks & Regards,
    VICKY

    hi
    vicky just went through your Query regarding release
    of requests..first of all U be sure of TMS configuration
    see whether it is consistent or not.then after Refresh
    the system and then come to release of requests.
    its true that we can transport through scc1 but first
    check about STMS configuration and the way you set
    that.
    Regards
    manjula.

  • Problem during import of 121 transport requests to productive system

    Hello
    We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in  TRJOB  as well).
    In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
    In SM37 I can see it as  job "RDDGEN0L" with  repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting  that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
    For fist two indexes I know they are not present  as objects "LIMU""INDX" in any transport request beeing imported.
    Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
    Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
    PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
    There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
    Does anyone knows workaroun to solve production

    are you importing these transport requests simultaneously into production?
    I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
    Rohit

  • Problem when creating a transport request

    Hello
    I copied productive BR3 to test BR1 system(it is a BW3.5 system). Test BR1 existed also before(only the main client was 003).
    Now main client is on both 001(I do not know if this matter). I replicated with transport controller and everything went fine.
    When I want to create a transport request I have problem "Extended transport contrl is not active . Cannot specify target client". when I wannt further explanation I get:
    "Extended transport control is not active: Cannot specify target client
    Msg.nr.TR067
    Diagnosis
    Extended transport control is not active. This means that you can only release transport requests for the following transport targets:
    Target group
    R/3 System without specifying a client
    Procedure
    Change the transport target of the request by removing the client (for example, "C11" instead of "C11.010").
    The simplest way of doing this is to use F4."
    When I use F4 for "Target" field I get "BR3.001" as only option. If I choose BR3.001 I get above message. If I use "BR3" I get "BR3 is not a consolidation target". For further explanation I get :
    "BR3 is not a consolidation target
    Msg.nr TK658
    Diagnosis
    Transport target BW3 is not configured as a consolidation target of this SAP System. If you do not stick to configured transport routes, you may cause inconsistencies between the SAP Systems in the system landscape.
    If you use extended transport control, you also need to specify a configured target client.
    If the configured consolidation target is a target group, you also need to specify the target group as the transport target, if the target group consists of a single target system, or a single target client.
    Procedure
    Choose a configured transport target, or change the transport route configuration in the Transport Management System.
    What to do?

    Hi Jan,
    Please check whether parameter CTC=1 has been set in Transport tool,If not set it.
    Also check whether your transport group is configured properly
    regards,
    Jai

  • Problem with the transport request

    A request was released to Prod.
    In D and Q the request is success but in P it shows one error..
    so, we tried to create a new request and copy the objects from the old one.
    but v r gettiing the objects not below the task(in req) but below the req..
    so it is not possible for me to release it.
    I also tried to edit the code , but when i saved it it is not asking for a new request. is it bcoz old req is released to P?

    Hi,
    In production system, it is showing an error in the logs while transporting : Generation of Programs and Screen and return an error code 8. there are no repositary objects to transport. this is just simple code modification. In Quality and Dev system, transportation was done successfully with out causing any problem.
    So, we tried to create a new transport request by editing the code in development.however it is not asking for the new transport request number while saving or activating.
    Also, we tried to create a new TR manually using SE09 and placing the modified objects under the task. but, transport request and task number are getting created at a time and while assigning the objects, the objects are under the request not under the task.the objects should be under the task only.
    this is the problem what exactly we are getting. Please clarify..
    Thansk!!!

  • Problem with "Create Transport Request"

    Hi all,
    Iu2019m working with Solution Manager and Charm. I have a problem when I create a transport request.
    After that I put regular correction into status u201CIn developmentu201D I choose u201CCreate Transport Requestu201D from the menu but the system display the message u201CThe last action triggered is locked in the task listu201D  . Is it a problem of authorization in satellite system? The user that I use to create a transport request have sap_all profile in the satellite system. What settings do I have to use in satellite system and in solution manager?
    Thank in advance
    giovanni

    Make sure that the profile S_TMW_IMPORT and S_TMW_CREATE has the correction authorizations assigned and that it is assigned to the user TMSADM of client 000 of your satellite system.
    Note 807228 can be useful.
    Hope this helps,
    Roel

  • Problem in adding function group inlcude in new transport request

    Hi friends,
    This is regarding the issue while moving the function group developed for BAPI object to production.Include having the suffix UXX in main program of function group I am not able to change and then save in new transport request,but the same is possible in R/3 4.7 version.
         Can you please help me out to get it done in ECC 6.0.
    Regards,
    Rajesh Akarte

    Did you try to do: Put cursor on transport number-select include icon-say select freely selected objects-I usually say dev class and can highlight and select the object and save. Please reward points if helpful.
    Message was edited by:
            Tom M.

  • Problem in extended Transport control while setting up transport request.

    I created a BDC program which will create a database table upon executing..
    The problem is the program worked well since yesterday, But today when i executed it , it is showing a information message when creating a new transport request .
    Extended transport control is not active:
    Cannot specify target client
    Since it s a recording ,and all the windows are processed using an OK CODE, this info box comes all of a sudden .I dont kno what went wrong , coz it was working fine the previous day.
    i could not create a new workbench request even after ignoring that info message.
    Pl suggest me what could be wrong.

    This message has a long text, please read it.
    Check with your system administrators, if they have changed anything regarding the transport process.
    In addition, instead of using "fragile" recordings, try using function modules like DDIF_TABL_PUT.
    Thomas

  • Problem transporting Request from Development to Quality Assurance Server

    Hi All,
    I m facing a problem of Transporting requests from one System to other.
    When adjusting the Request ,the error message reads as follows :
    <b>RFC system error in system/destination
    [email protected]_HSE</b>
    Now,when I check the RFC Connection for <b>[email protected]_HSE</b>,,
    i get the message :
    <b>" License Check required "</b>
    Please respond to this query urgently.....
    Thanks in advance

    Hi!
    I think it's better to call SAP support, if you have problems with the licenses...
    Maybe your company forget to pay their fees since a while
    Regards
    Tamá

  • Problem in tables of transport request !!!!

    Hi all,
    When i doing the Charm Process....nd during that when the developer generates the transport request....at that time that tp request appears in table /tmwflow/trordhc but it does not appear in /tmwflow/track .... nd after releasing the subtasks and then finally the whole transport request....at that point also it does not appear in /tmwflow/track ..... after this when the basis person pass that transport request to quality....then the /tmwflow/track shows 1 record for that transport request.....so finally after the whole flow /tmwflow/track will show 2 records for that transport request i.e 1 of quality and 1 of production....logically 'dev' record should also be there.....what i am noticing is after few hours like 2 or 3 hours that development record started appearing in table /tmwflow/track .... so is it a problem in configuration of solution manager or this sudden appearance of dev record is ok....coz ive to build a report in which it displays the tracking of tp requests....
    Any suggestions would be helpful...
    Regards,
    Deadlocks

    Hey deadlocks,
    many ChaRM tables are updated as Fernando said when cmssyscol job finished.
    I guess those 2/3 hours correspond to the time u waited before the job runned. The transaction solar_eval and a couple of others allow u updating data as well.
    U have to know that this job may sometimes/quite often give unsupected/missing data; and also delayed. The best you can do is simply read the tr log using a function modul and interpretate info concerning the transport requests
        CALL FUNCTION 'TRINT_TDR_USER_COMMAND'
          EXPORTING
            iv_object  = lv_object
            iv_type    = ls_sel_node-type
            iv_command = lv_command
          IMPORTING
            ev_exit    = pv_exit.
    LV_OBJECT                                             SLMK900004
    LS_SEL_NODE-TYPE                                     REQU
    LV_COMMAND                                             TAST
    for example.
    You can debug log reading in SE01 and put a watchpoint on instruction 'CALL FUNCTION'. It is the second one.
    This will display log on screen
    Good luck
    Khalil

Maybe you are looking for