Transport Request showing in both QLT & PRD

Hi Gurus,
I have one query regarding transport request,
In our landscape there are 3 systems.When we transport any request from DEV to QLT it is also showing in PRD system when we refresh import overview in PRD.Is there any which I have to configure in STMS.
Please explain it.
Regards
Yogesh

Hi,
there is a concept of virtual buffer in between test system and production ...i dont know how it is activated or maintained but you can take the help of Basis of that.
All the TR's imported into Quality are stacked up in buffer and from there they are added to the import queue of the production.
I think your development system is mapped to production as well and you have to ask the basis team to map only the quality system to the production.
Thanks
Ajeet

Similar Messages

  • Transport request showing Repair for changes to OBU1.

    Hi frieds,
    I changed a document type assignment to a T code  in OBU1.At the time of saving it is automatically generated with work bench request and in request tree it showing Repair, after releasing also it is showing Repair.
    I dont understand why it is showing
    Object can only be created in SAP package and Repair in request, is i am doing any wrong, please help me.
    Thanks,
    Srini.

    Hi Srini
    If any apply OSS Note at the time it will shows repair. I think its not in activate mode.  Pls. check its activate mode or not.  Then activate it and release. It will release.
    If any doubts pls. let me know
    Thanks
    Ranjith

  • Transport request moved error

    Dear all,
    while move to the transport request its not imported in prd server. while doing the request its show the given error:
    hostname.domain.com :52934
    RFC error :Connection to partner:
    Its  very urgent.any one know pls reply immeidiate.
    jeeva.

    Hi,
    Check TMS configuration for your production system to domain controller.
    Go to STMS_DOM --> select production system --> then from menu select SAP system --> check --> transport directory,connection test , transport tool.
    Also check RFC (something like TMSADM@<SID>.DOMAIN_<SID> )between domain controller and production server vice a versa.
    Regards

  • Transport Request in PRD is in the IMPORT RUNNING status..

    Hello Experts,
    I have a problem while i m importing the request in PRD,the request is in the state of IMPORT RUNNING.
    While i have imported the same request in the other systems DEV and QAS successfully.
    I have seen the RDDIMPDP in sm37 it is getting cancelled. Then in 000 client i have runned the job RDDNEWPP with the DDIC user. And did the same in the PRD Live Clinet.
    I have also triggered it in sm64 and then checked the job in sm37 the job is finished successfully but the request is still in the same state.
    I have checked the consistency its all ok.
    One of the request suddednly got imported and rest are still in the same Import Running state.
    Now this made me curious if one got imported then why not other requests getting imported.
    All the other requests are imported successfully in DEV and QAS successfully.
    A couple of days ago i have made the changes to the Live Client in PRD for some requirment then i have revert back the changes to the non modifiable state. Does it have any effect on the transports. Because i have been facing this problem after the changes of the PRD Live Client.
    Please i would appreciate if anyone can help me giving the proper solution.
    Thanks.
    Regards.
    Mudassir Imtiaz.

    Hello Anindya.
    Thanks for your quick help. I have removed the entries from the table TRBAT and imported and it was successfully done.
    Now the problem is for each transport request i have to see the job RDDIMPDP and schedule it because its getting cancelled and for each transport request i have delete the entries from TRBAT table. Can you tell me something by which i dont have to go delete the entries from the table TRBAT every time. And i still wonder why the job RDDIMPDP is getting cancelled. I have also scheduled RDDNEWPP in Client 000 with DDIC and still the same problem.
    Another thing which i have noticed in sm21 is the job (RDDIMPDP) is getting scheduled in Application server but i have scheduled in DB server. Every  time i have to schedule the job from sm36 give the DB server in Exec. Server and execute.
    Thanks for your response.
    Regards.
    Mudassir Imtiaz.

  • To revert back a transport request from prd to dev server

    hi experts
        how to revert back a transport request from prd server to
        dev server?
        a transport request has been wrongly transported
        and it has make major changes in production server,
       now  we want to revert back that request , we know the   request no.
    regards
    pankaj

    All you have to do is create an order of transport type "Transport of copies" in PRO.
    I give you the steps to follow:
    1. Go to SE01 and create a new order (remember the type "Transport of copies").
    2. Enter the data of the order of transport that is going to come back.
    3. Enter the target, here is where you asign the target system to carry the request.
    4. Now just add the number of request to the new request you just created.
    5. Finally released the request from this transaction.
    6. Check on the queue of transport in DES, the request must appear there.
    I hope you serve =)

  • Error in Transport Request PRD to Test application

    Dear all,
    We are in process of doing reverse transport from PRD to TEST system. i have opened the PRD system and collected the objects in TR and once again done the transport of copies in PRD system
    after transport of copies, i tried to import the TR in TEST transport queue. once i tried to import the same i got the below error.
    Please advise what needs to be done. Any help would be appreciable.
    Transport control program tp ended with error code 0247
    Message no. XT200
    Diagnosis
    An error occurred when executing a tp command.
      Command: ADDTOBUFFER PBWK900028 TBW pf=/usr/sap/trans/bin/T
      Return code: 0247
      Error text: addtobuffer has problems with data- and/or cofile
      Request: PBWK900028
    System Response
    The function terminates.
    Procedure
    Correct the error and execute the command again if necessary.
    regards,
    mohankumar.G

    Hi,
    when creating Transport Requests in the Production system the requests are created as local requests that can't be transported between systems, and when the Transport Request is released the Data and Cofiles are not created.
    You need to change the client settings with Tx SCC4 to allow the creation of Transport Requests.
    You need to create a Temporary Transport Layer and Temporary Transport Route from Production to Test System. When you create the Transport Request make sure the transport request is using this newly created transport layer and has a target system.(Package also) when you release this request,  the data and cofiles will be created. The transport request should also appear in the import queue of the Test system.
    Satish.K

  • How do I find from which terminal transport request imported to PRD

    Hi Experts,
    Let me know how can I find from which terminal transport request imported to PRD
    Thank you in advance.
    Regards,
    Raj

    Hi Raj,
    Please find the answer for your question  in below discussion.
    How to find out workstation of a transport request created
    I hope it will help you
    BR
    AKJ

  • Transport request / Object - showing repair

    Dear All,
    We have copy some of infocube object from other system to our existing development sever thru transport request.
    Now when we are doing some change in object and creating request.  Within the  request object no is coming as a repair . but it allow to release the both
    Can you please suggest to resolve this problem .. ?
    Regards
    Vimal pathak

    When new created objects are added to Transport Request, they appear under Development Task and when existing objects are changed and collected in transport, they appear under Repair Task. This is not a problem and a usual behaviour with repect to Transports. So this is not a issue.
    Abhijit

  • To show the release status of the transport request

    Hello Experts,
    I am having a requirement like the following:
    I need to list the transports along with the release status of the transport request in a View.
    Release status means that transport request imported into Development system, Quality system and Production system.
    Which table will hold this information?
    I have checked with E070. But i dont know how to find in that. Or any other table is there to do this?
    Thanks and Best Regards,
    Suresh

    Hello Kalyan,
    I dont know how to find my request in TMSBUFTXT.
    For example i am having a TR now in Dev system: XXX45678.
    If i have imported it to Quality system, then how to find this entry?
    Or if i have imported it to Production system, then how could i find that the TR XXX45678 is now in Production system.
    Since i am creating a View, i need the information that in which Database Table this entry will be stored.
    I dont want Function module name.
    Best Regards,
    Suresh

  • Error while Transporting Request

    Hi All,
    we have ECC 6.0 on Unix environment.
    we had copied a production client with group selection, as we wanted all the three system PRD,DEV,QLT in sync.
    the export was succesfully done.i copied Cofiles & Datafiles which are generated in DEV & Quality server,then i add request no in transport queue.  the time when i copied transport request was not releasing from development.we checked the destination it was full so we removed the old request. then req is releasing.
    after that i deleted the Cofile & datafile from OS level of DEV & QLT & trying to delete the reques from request queue. it is deleted but when im refreshing the queue its coming back in the queue.
    while transporting other request its giving me error.
    please help out me.

    Hi Aasmi Gawas,
    Please could you post the error?
    We don't have a crystal ball to see the errors in your system...
    Best Regards,
    Erick ILarraza

  • Unable to Import Transport Request - hanged with Truck icon

    Dear SAP Expert,
    Our DEV & QAS are on normal domain installation but Production installation is on HA Cluster on Windows.
    We have configured the STMS for the CRM landscape system and domain is Development server.  While trying to import all the Transport Request, it is getting hanged and showing in import running status (showing Truck icon). 
    We have checked some possible logs and reviewed the complete STMS configuration, profiles and process and found the BG job RDDIMPDP is not getting scheduled continuously. 
    The below error is from latest log file u201CSLOG1151.PCRu201D from F:\usr\sap\trans\log (global directory) from Production server for your review
    WARNING: System PCR. Warning.        20111220144048 :
    ERROR:       The following call returned with exit code 7:
    ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=PCR pf=
    VSAPPRDCRMSCS\sapmnt\PIS\SYS\profile\DEFAULT.PFL
    ERROR:       Background jobs cannot be started.
    ERROR:       Please check trace file dev_evt.
    WARNING:       (This warning is harmless if no further warnings follow.)
    I would request, please help me for resolving this issue immediately as our GO-LIVE date is nearby and have to import all the TRs from CRM QAS to this PRD servers.
    Kindly let me know, if you need any further information.
    Thanking you,
    Devki Nandan

    Hi,
    This forum is for SAP application called as 'SAP Transportation Management'. Your query is irrelevant to this forum. Please look for an appropriate forum to post your query.
    Regards,
    Nageshwara Manda

  • Unable to Create Transport request in more then one DEV client (in ChaRM)

    Hi,
    We are having 2 Landscapes,
    DV1 (100) --> QA1(100) --> PR1(100)
    DV1 (200)--> QA1(200) --> PR1(100)
    Both these landscapes are added in the ChaRM Project landscape. When we have created a correction and created a Workbench request, we were getting the option to choose the DEV system and we chose DV1(200). When we tried to create a TR for Customizing in DV1(100) it did not provide the pop up for DEV systems and directly created the customizing request also in DV1(200). We were unable to even create the TR in DV1 (100) - using the task 'Create Transport request' in the Task plan for the corretcion (It gave an Error that the DV1(200) is the Development system for this change).
    is this the standard behaviour? can't we have TRs from different client/ development systems under the same correction?
    Please clarify?
    Regards,
    Kathir

    Hi
    As i said earlier you will get option to choose system for creating Transport Request only in case of normal corr
    but in case of urg corr
    you need to give ibase for production of the cocerned landscape
    e.g if u have ecc and bi and want to create transport in ecc then giv ibase for prd of ecc only
    because you will not get pop up in urg corr
    Hop doubt clarified
    Regards
    prakhar
    Edited by: Prakhar Saxena on May 12, 2010 6:17 AM

  • Transport Request Tracking

    Hi,
    Good morning all,
    here i hava one requirement regarding transport request .
    How to know request target when we released it .
    I.e when we released the request , it should be transport either testing , quality or
    production . or both .
    where should sap maintaining these details .
    is there any data base table ? .please help me .
    In the table E070 it is maintainig some details .
    The table contains only one target details .
    if a particular request is transported to more than one server ,
    still the table contains only about one server .
    where can i get the remaning details .
    my requirement is shown below .
    requestno   shorttext reldate                 qualit prod
    xxxk9008767  abc       27.01.08              Y     Y
    xxxk9008768  abd       26.01.08              Y     N
    xxxk9008769  fgh       25.01.08               N     N
    if the request is transported to quality
    i have to show Y  in the quality column
    if trasnported to production also then Y in the
    prod column .
    but in the tabel E070-TARSYSTEM contains only one
    target details .
    i have checked for so many requests .
    in the table E070 it is not showing the requests
    are transported to both servers .
    but in SE09 transaction it showing as
    the particular request is successfully transported to
    both systems .
    please help me ,
    Thanks in advance .
    regards ,
    Srinvias

    Hi Srinivas,
    Am not a 100% sure however how I think it works is
    When you view the transport details in Development server in E070, the  E070-TARSYSTEM  for the request will point to QA server.
    Then when the request is transported to QA, the same transport entry in E070 would be updated with  E070-TARSYSTEM  as Production server.
    Can you check this and confirm.
    Cheers.

  • The transport request are pending in the import quene

    Hi the transport request are released from the development system and are showing pending in the production system

    Hi Shri,
    According to your query you have only two system landscape. If this is true then before import transport to prd from dev to import in send box which is test client. If everything is ok then you can import this transport in prd server with stms tcode.
    If you have any doubt pls mentioned here in details.
    Regards,
    Anil

  • ABAP Query Transport request related

    Hi,
    I have created a Abap query,
    1) User group
    2)Infoset
    3) Query
    But when i transport the request in to Quality, I can see only Infoset, not able to see User group and query which i created in the
    Development
    Please suggest, is this std behaviour or is anything missed
    Rgds,
    Jai

    Thanks to all,
    I just created TR with new package for user group and included ifoset and query in the same TR
    and imported, issue is resolved
    But my question is,where we can utilize below help material, I have spent much time to understand below given explaination and finally left without any conclusion
    Short text
    SAP Query: Transport tool
    Description
    The report RSAQR3TR handles all tasks concerning the transport of queries, InfoSets and user groups.
    General information
    Queries, InfoSets and user groups are stored in the table AQDB. This table is client-specific. For the transport of queries, InfoSets and user groups, there is a special client-independent transport table called TAQTS. You can carry out transports either
    ·     from a client (source client) of an SAP system to another client (target client) in the same SAP system or
    ·     from a client (source client) of an SAP system (source system) to a client (target client) in another SAP system (target system).
    In both cases, you have to perform similar actions.
    The objects to be transported must first be copied from the source client using an export from the table AQDB into the transport table TAQTS. At the same time, a transport request is created for the transport system that includes all entries created by the export from table TATQS (transport dataset). The name of this transport request conforms to the transport system naming conventions (sysKnnnnnn) and is included in the export log. The transport dataset is stored in the table TAQTS under a key which matches the name of the transport request.
    If you are transporting within one SAP system (from one client to another), you can import the transport dataset from the target client. The name of the transport request to use for this purpose is that specified during the export, since it should match the key of the transport dataset in the table TAQTS. With this import, the transport dataset is read from the transport table TAQTS and inserted into the table AQDB, where extensive checks ensure that there are no inconsistent statuses in the table AQDB.
    If you are transporting from one SAP system to another, you must first use the transport system to release and export the transport request generated by the export. This transports the transport dataset from the transport table TAQTS into the target system. Then, you can import from the target client of the target system, as described above.
    The transport datasets generated by exports in the transport table TAQTS are not deleted after successful import unless this is explicitly requested. Therefore, you can import a transport dataset several times (when copying a functional area to several different clients, for example).
    This report handles exports (generation of transport datasets), imports (reading of transport datasets) as well as the management (display and deletion) of transport datasets.
    As transport action, you must specify one of the values EXPO (export), IMPO (import), SHOW (display transport dataset) or DELE (delete transport dataset).
    Transport action EXPO (exports)
    If you select the 'Test only' parameter when exporting (no blank characters), the system determines only those queries, InfoSets and user groups that would be selected according to the selections for transport described below and generates an appropriate log. A transport dataset is not generated in the table TAQTS. This allows you to check whether a selection really includes the queries, InfoSets and user groups to be transported.
    With exports, there are four different options for selecting objects (user groups, InfoSets, queries) to be transported. These are 'Transport of user groups', 'Transport of InfoSets', 'Transport of InfoSets and queries' and 'Transport of queries'. You must choose exactly one of these transport types.
    In each case, you can also define an import option depending on the transport type. This allows you to determine how the transport dataset is inserted in the table AQDB of the target client during a later import.
    The import options, each of which has an abbreviated syntax,
    are as follows:
    REPLACE  or R
    MERGE    or M
    GROUP=ug or G=ug    (ug = name of a user group)
    UNASSIGN or U
    If you use the transport type 'Transport of user groups', all user groups are transported according to the select option 'user groups' and the selected import option. The import options REPLACE and MERGE are allowed.
    If you use the transport type 'Transport of InfoSets', all InfoSets are transported according to the select option 'InfoSet' and the selected import option. The import options REPLACE, MERGE, GROUP=ug and UNASSIGN are allowed.
    If you select the transport type 'Transport of InfoSets and queries', all InfoSets are transported according to the select option 'InfoSets' and the selected import option. The import options REPLACE and MERGE are allowed. Also, all queries are transported for each functional area selected, according to the select option 'queries'. In this case, the user groups of the queries are irrelevant and only the import option REPLACE is allowed.
    This transport type allows you to transport a modified InfoSet and all the associated queries.
    For the transport type 'Transport of queries', all queries are transported according to the select option 'User groups' and the select option 'Queries' as well as the selected import option. The import options REPLACE and GROUP=ug are allowed.
    The export log displays which user groups, which InfoSets and which queries are transported, as well as the import options used.
    Transporting a user group
    Transporting a user group means transporting all members of the group from the source client. However, the InfoSet assignment to the user group in the source client is NOT transported.
    The import option REPLACE first deletes all members of the group in the target client and then enters the members from the source client.
    The import option MERGE leaves all members of the group assigned in the target client and adds the members of the group from the source client.
    Entering a new member in a user group in the target client is possible only if a user master record exists.
    In the target client, the assignment of InfoSets to this user group remains.
    Transporting an InfoSet
    Transporting an InfoSet means transporting the InfoSet and the InfoSet assignment to user groups in the source client.
    Importing an InfoSet is possible only if the same logical database exists in the target client. Extensive checking is also performed to ensure that there are no inconsistencies between the InfoSet and the logical database.
    The import option REPLACE first deletes the assignment of the InfoSet to user groups in the target client, provided there are no queries dependent on the InfoSet. The InfoSet is then transported to the target client and the assignment of the InfoSet to user groups is copied from the source client, if user groups also exist in the target client.
    The import option GROUP=ug first deletes the assignment of the InfoSet to user groups in the target client, provided there are no queries referring to the InfoSet. The InfoSet is then transported to the target client and assigned to the user group ug of the target client, if such a user group exists.
    The import option MERGE leaves the assignment of the InfoSet to user groups in the target client and transports it to the target client. It then copies the assignment of the InfoSet to user groups from the source client if user groups also exist in the target client.
    The import option UNASSIGN first deletes the assignment of the InfoSet to user groups in the target client, provided there are no queries referring to the InfoSet. The InfoSet is then transported to the target client. No assignment of the InfoSet to user groups is performed.
    Transporting a query
    Transporting a query means only the query itself is transported.
    Importing a query is possible only if a corresponding user group (see below) and a corresponding InfoSet exist in the target client and if the InfoSet is assigned to the user group. To demonstrate the effect of the import options, suppose that the query has the name QU and belongs to the user group BQ in the source client.
    The import option REPLACE overwrites the query QU of the user group BQ in the target client if the user group exists.
    The import option GROUP=ug overwrites the query QU of the user group UG in the target client if the user group exists. In this case, the query is explicitly assigned to a user group in the target client. This target user group may be differnet from the user group in the source client.
    Transport action IMPO (imports)
    If you choose the 'Test only' parameter with imports, only a test import is performed. This means that the system performs checks as for a real import and generates an import log. The import log contains information on the locks that have to be set. With a test import, you can check whether a transport dataset can be imported without any problem and which changes it would make in the table AQDB of the target client. A test import itself never makes changes in the table AQDB of the target client.
    All transport datasets are imported according to the select option 'transport request'. In this case, the system outputs a detailed log of all checks carried out and all changes made in the table AQDB.
    If you select the parameter 'Delete after successful import', the transport dataset in the table TAQTS is deleted after the import of each transport dataset if no errors occur during the import.
    Transport action SHOW (display)
    All transport datasets included in the transport table TAQTS are output with name (also the name of the transport request) and contents in the form of an overview.
    Transport action DELE (delete)
    All transport datasets are deleted according to the select option 'transport request'. To avoid unintentional deletion, the select option 'transport request' must contain values, meaning that the transport action DELE is not performed if this select option is empty.
    Transport of ABAP Query
    I am involved in this upgrade project to 4.7 
    The users are not able to find any reports (in QA System) which were there before the upgrade in SQ01. But they can see them in production which is not yet upgraded. They want me to copy all the reports to the QA system now....I dont have any idea how to do that. 
    I remember a similar problem upgrading to 4.6C from 4.5B ...... 
    Take a look at OOS note 672784. 
    You can transport queries between systems in SQ02 (hit the lorry button) or run program RSAQR3TR. 
    You download the infosets, queries etc into a file and load them into whichever system you wish.
    Just wanted to share my experience of transporting queries:
    I needed to move a user group, 2 infosets and 3 queries from a 4.6 system to a 4.7 system. 
    When I tried doing this via the SQ* transactions I did not get the import/export option, so instead ran RSAQR3TR. 
    Step 1. Run RSAQR3TR in 'old' system. Select EXPORT and specify the objects to be transported. 
    (System includes these in an automatically created transport request) 
    Step 2. Release this transport and request it be transported to 'new' system. 
    (This results in the entries being populated in transport table AQTDB in 'new' system). 
    Step 3. Run RSAQR3TR in 'new' system. Select IMPORT and tick the Overwrite checkbox. Specify the transport number in the field labelled 'dataset with imports'. 
    (RSAQR3TR gives the message that stuff has been imported OK). 
    Step 4. In my example I still couldn't find the queries, so ran RSAQR3TR one more time, this time specifying 'Copy Standard Area -> Global Area'. 
    (Now my queries etc were available in new system). 
    Perhaps there are better ways, but after 1.5 days of struggling I was glad to get this far.  
    regards,
    Jai

Maybe you are looking for