Transport roles (with assigned group) containing folders and iviews

Hi,
This message was in the BI forum before and I think that it suits here better.
I created a portal role which is contained in a folder X under Portal Content. This portal role is associated with a particular ABAP menu-role by means of Assigned Groups. When I transported the folder X with all dependent objects from Dev to QA, the portal role appeared but the Assigned Groups is empty. Another words, the association between portal role and the ABAP menu-role could not be transported. How can Associated Groups in a Portal Role be transported?
Then I also tried to do the following steps:
1. Export and import portal contents which include the whole structure with folders, roles and iviews under each role.
2. Export and import the same roles as user management data
The result from 1 was that the whole structure including the roles is imported; however none of the portal role contains the associated assigned group.
The result from 2 was that the UME roles with assigned group are imported as separat objects.
Now, the same role appears both as portal role without assigned group and the UME object with assigned group. But, there is no connection between 1 and 2. That means that I cannot use 2 anyway.
Therefore, I still have to manuelly modify 1 with assigned role once again after importing step 1. Is there a way to import 1 with the associated assigned group without any manuel modification?
Thank you in advance for any helpful advice.
Best regards,
Zabrina

hi,
check the following threads
http://help.sap.com/saphelp_nw04/helpdata/en/6d/7c8cfd410ea040aadf92e1f78107a4/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/6d/7c8cfd410ea040aadf92e1f78107a4/frameset.htm
Re: Transport management in BW 2004s
let me know uneed any further info
bvr

Similar Messages

Matching ABAP Roles with UME Groups

Hello,
we are facing the following issue:
We are providing Business Warehouse access via NW Portal beside the "normal" abap system. Therefore we need to put every new user into a special UME-group. How can we match ABAP-Roles with UME-Groups?
We just want to assign a single (portal-)role to an user in the abap-stack, not another group in the UME. Is this possible?

Sascha Landowski wrote:
We did it a little bit different, but that's it. We had an existing portal group with the needed portal roles. We created a new group in reference to a existing abap role and gave it the portal roles.
In fact thats I have suggest Sascha However, its a very common construct in EP, glad it worked for you
reagrds

[svn:fx-trunk] 12795: Resolving race condition with interdependent Group properies alpha and blendMode .

Revision: 12795
Revision: 12795
Author:   [email protected]
Date:     2009-12-10 09:56:11 -0800 (Thu, 10 Dec 2009)
Log Message:
Resolving race condition with interdependent Group properies alpha and blendMode.
QE notes: None
Doc notes: None
Bugs: SDK-24636
Reviewer: Deepa
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24636
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Group.as

How to create a folder with standard contained folders and files in SharePoint 2013?

I've got folders and files on my SharePoint 2013 site that form a template when I add a new folder for a customer. When I create a new folder for a customer, I want those folders and files added automaticly to that new folder. How can I do that?

How would I go about doing this without Visual Studio? Is that possible? Need to create Folder templates.
Every "new folder" created should have nested folders already included.
Company Name (New Folder 1)
Company Documents (1.01)
Tax Documents (1.02)
Bank Statements (1.03)
Extreme novice, please give as much details as possible! I'm trying to implement SP 2013 without all the 2013 software (Visual Studios, SharePoint Designer, etc.)
Thank you!

Transporting role with user assignments

Hi Guru's,
When we transport a role with user assignments then in the target system, the role will wipe out all the existing assignment and show the the users in the original released request.
eg. D->Q
In dev:
role-A has userA, userB
In Qas;
Role-A has UserA and userC
......after import of request:
the roleA will have userA and userB
What I have noticed is even if userB does not exist in Qas, the assignment will be reflected in AGR_USERS. A PFUD or user compare in a role does not remove the ghost entries. Is there any way to remove these inconsistencies ?
I saw note 534010, which is applicable for UST04.
Thank you
Abhishek

Hi Matt,
Yes, I do agree this is not a best practice. However, for a particular requirement, we thought this was the best way to solve the problem. Infact, this was the first time I ever did this
We have a role that needs to ONLY be assigned to every person in a particular team. With more than 30 systems present( out of the production landscape, just the testing systems), we thought this would be the only fast way out than going in each system and assigning this role. This would also ensure unassignment of this role to any other person too
Any other alternative?
Thank you
Abhishek

ISE: create rules with AD groups for Users and Computers

Hello,
We've just begun to work with ISE.
Is it the good place to post on ISE, or there is a dedicated forum in another place?
We'd like to create some rule depending of Computer member groups AND Users member groups from AD, but we meet some difficulties.
We've created AD groups for Computers and Users depending of their Department:
Users_1
Users_2
Computers_1
Computers_2
When we create some basics rules regarding one group only:
- with a group Computers_x to attribute a specific VLAN to a computer (when no Windows session is opened), it runs correctly.
- with a group Users_x to attribute a specific VLAN to an user (when Windows session is opened), it runs correctly.
But when we create a rule regarding a group from Computers and one from Users, to attribute a specific VLAN to an user on a specific computer, this rule is not applied.
Is it possible to use ISE on this way?
Thanks for help.
Regards,
Chris

Enable EAP Chaining— if you want Cisco ISE to allow authentication of both machine and user in the same EAP-FAST authentication.
http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_80_eapchaining_deployment.pdf

Indesign unable to open a file with name that contains letters "ä" and "ö"

Hi, I just updated indesign and it seems it lost the ability to open files that have letters "ä" and "ö" in the file name.
After I renamed the files, they were opened fine.
Error I get is: "Either the file does not exist, you do not have permission, or the file may be in use by another application"
Hope this will be fixed, many languages contain those letters.
Edit: Indesign CS5.5 Version: 7.5.3

Sorry for the lack of details
OS: Windows 7 64-bit
OS Language: Finnish
Indesign language: English
Procedure where this problem appears:
- Drag and drop a file (no matter what extension).
- Place a file.
File name in question: EtsiväNuorisotyö_juliste_A3_PRINT.pdf
Also tried with different file formats: EPS and JPG.
File works when renamed "ä" to "a" and "ö" to "o".
Also tried placing and drag and drop after I copied the files from network drive to desktop, same result.

Modify the default "No portal roles are assigned..." message iView

Hi,
When a user with no roles assigned is trying to access the EP6 SP9 portal, he/she is facing a warning message:
"No portal roles are assigned for this user.If this problem persists, contact your system administrator."
accompanied by a 'log off' link.
Is it somehow possible to change the look and feel and/or behaviour of this message?
For instance, we would like the message appearance to be more 'friendly' and with a link where they can find further assistance, etc.
With best regards,
Robin

The window for logoff is part of the masterhead. So i think you can modify the masterhead pasr file for that.
Its location is at...
usr/sap/<instance>/JC00/J2EE/cluster/server0/apps/sap.com/irj/servlet_jsp/root/web-inf/deployment/pcd.
In this folder you can find the com.sap.portal.masterhead.par.bak
this file can be imported to your developer studio and can be editted and uploaded.
hope this helps
Cheers
gEorgE

Associating roles with LDAP Groups

I see in a number of places where I can define roles using a "principal-name".
Can I use a realm group here as well as a single user? What I'm looking for is
a method where I can set up my roles in my web appps and ejbs and then on the
fly grant users rights by adding them to a group. Certainly seems possible but
I must be missing something.
Consider the following example (from the weblogic documentation) and let me know
if I can use realm groups for the section attributed to the weblogic.xml file.
(I marked it with ***).
<security-constraint> <web-resource-collection> <web-resource-name>SecureOrdersEast</web-resource-name>
<description> Security constraint for resources in the orders/east directory </description>
<url-pattern>/orders/east/*</url-pattern> <http-method>POST</http-method> <http-method>GET</http-method>
</web-resource-collection> <auth-constraint> <description>constraint for east
coast sales</description> <role-name>east</role-name> <role-name>manager</role-name>
</auth-constraint> <user-data-constraint> <description>SSL not required</description>
<transport-guarantee>NONE</transport-guarantee> </user-data-constraint> </security-constraint>
<security-role> <description>east coast sales</description> <role-name>east</role-name></security-role>
<security-role> <description>managers</description> <role-name>manager</role-name></security-role>
weblogic.xml entries *** Can these come from the realm????????***
<security-role-assignment> <role-name>east</role-name> <principal-name>tom</principal-name>
<principal-name>jane</principal-name> <principal-name>javier</principal-name>
<principal-name>maria</principal-name> </security-role-assignment> <security-role-assignment>
<role-name> manager </role-name> <principal-name>peter</principal-name> <principal-name>georgia</principal-name></security-role-assignment>

See my answer to your question:
Simple (dumb) role/group question
Yong
"Ilango Maragathavannan" <[email protected]> wrote:
>
I see in a number of places where I can define roles using a "principal-name".
Can I use a realm group here as well as a single user? What I'm looking
for is
a method where I can set up my roles in my web appps and ejbs and then
on the
fly grant users rights by adding them to a group. Certainly seems possible
but
I must be missing something.
Consider the following example (from the weblogic documentation) and
let me know
if I can use realm groups for the section attributed to the weblogic.xml
file.
(I marked it with ***).
<security-constraint> <web-resource-collection> <web-resource-name>SecureOrdersEast</web-resource-name>
<description> Security constraint for resources in the orders/east directory
</description>
<url-pattern>/orders/east/*</url-pattern> <http-method>POST</http-method>
<http-method>GET</http-method>
</web-resource-collection> <auth-constraint> <description>constraint
for east
coast sales</description> <role-name>east</role-name> <role-name>manager</role-name>
</auth-constraint> <user-data-constraint> <description>SSL not required</description>
<transport-guarantee>NONE</transport-guarantee> </user-data-constraint>
</security-constraint>
<security-role> <description>east coast sales</description> <role-name>east</role-name></security-role>
<security-role> <description>managers</description> <role-name>manager</role-name></security-role>
weblogic.xml entries *** Can these come from the realm????????***
<security-role-assignment> <role-name>east</role-name> <principal-name>tom</principal-name>
<principal-name>jane</principal-name> <principal-name>javier</principal-name>
<principal-name>maria</principal-name> </security-role-assignment> <security-role-assignment>
<role-name> manager </role-name> <principal-name>peter</principal-name>
<principal-name>georgia</principal-name></security-role-assignment>

Probelm with query that contains parameter and reportviewer

Hi,
I writing a windows application with oracle database.
I have a query like that
select * from table1 where table1.Field1 In (:param)
I create my parameter like that
Dim param as string = " 'value1', value2, 'value3' "
When i run the query it returns nothing. I think the problem is because of the double quote (") arround the param.
Does someone have an idea?
Thanks

This error is typical. Parameter is approapriate anyplace where you could use Oracle literal, e.g. instead of
select * from table1 where table1.Field1 In (1, 2, 3) you might use
select * from table1 where table1.Field1 In (:a1, :a2, :a3),
but SQL like
select * from table1 where table1.Field1 In ('1, 2, 3')
is most likely sensless
Generally speaking you should not use parameterized IN expression when parameters are elements of the list that is defined interactively. Better approach is to dynamically generate IN list and concatenate it to SQL string:
stSQL = 'select * from table1 where table1.Field1 In (' || v1 || ',' || 'v2' || ')'
and that's it.
Usually number of variants is limited and you do not make your Oracle server to over-parse.

Setup a simple sales funnel with exchange 2013 public folders and outlook 2010 -2013

BCM for Outlook is big and has too many choices. What we want is a combination of contacts and tasks within a public folder so we can see what others are doing. If possible I want
to make a connection between an contact and a task. The task should have some extra fields like branches responsible organization members status etc. Does anyone have a simple solution which is easy to implement in a small organization of 10 people?

Hello,
First of all thank you for your answer. The Outlook version I'm using is 14.0.7113.5005 and the Exchange versuin is CU3. As I'm testing it on XP client it is probably the issue in the PS. I'll try it with Win7 client probably tomorrow. I wonder if there
exists any kind of workaround for XP clients.
Thank you in advance,
Peter

How do I save my Firefox bookmarks, task bar (I have it set up with all kinds of folders and bookmarks) to a flash drive in order to transfer all the info to another computer?

''Duplicate post, continue here - [/questions/777069]''
I would also like to transfer all my saved passwords if possible. I want to go to the store ASAP, but I need to do this before I leave--I would appreciate some quick help. Thanks!!

The user data is stored in the profile folder. You can copy the data manually by copying the contents of the profile folder, for details see [http://kb.mozillazine.org/Profile_backup Profile backup - MozillaZine Knowledge Base] or [[Backing up your information]].
There are some add-ons and utilities that can make this process easier. The first one is the [https://addons.mozilla.org/en-US/firefox/addon/2109/ FEBE] add-on which can be used to copy a profile. Another option is the free [http://mozbackup.jasnapaka.com/ MozBackup] utility.

Transport roles and analysis authorization with user assigned

Hi expert,
I face with this problem transport roles and analysis authorization with user assigned. When I have created a transport request to move the roles and analysis authorization from development system to test system. I couldnu2019t maintain the user assigned, after transport I have to assigned manually all of user or create a program to fill AGR_USER table or there are other way.
Thanks for your time,
Luis

Hi,
In role administration, you have the following options for transporting roles:
You can download the roles from one system and upload them into another
You can import the role from a remote system using RFC
You can transport the roles with the transport function.
Role upload loads all role data, including authorization data from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case.
Transporting Roles with the Role Transport Function
       1.      Start the role administration function by choosing Tools ® Administration ® User Maintenance ® Role Administration ® Roles (transaction PFCG).
       2.      Enter the role to be transported and choose Transport Role.
The Mass Transport of Roles screen appears. You can control the default settings for the options Also transport single roles for composite roles and Also transport generated profiles for roles using Customizing switches (see Role Administration Functions in the section Functions of the Utilities Menu).
You should not change the authorizations profiles of the role after you have included the role in a transport request. If you need to change the profiles or generate them for the first time, transport the entire role again afterwards.
For more information go thrpugh the below link
http://help.sap.com/saphelp_nw70/helpdata/EN/6d/7c8cfd410ea040aadf92e1f78107a4/content.htm
Regards,
Marasa.

Can I twirl down (and up) a group of folders?

Is there a way of selecting a bunch of folders in a column and then twirling all of them down but only one level in? Option+double click can open and close a group of folders and that would be more or less the idea but the windows are stacked on top of each other so it kind of defeats the purpose of being able to get to the files. Holding down option while attempting to twirl folders down opens up the clicked folder only and does it all the way down - to the deepest level; again not my goal
(I'd like to back up my iTunes library by batch zipping albums with Stuffit and for that I need to get into each artist folder - in case anyone wants to know what I'm trying to accomplish)

Nope. That doesn't work. Plus I'd rather use Stuffit - it will delete Mac specific files in the process (.DS_Store etc.) and move the original folders into Trash after compressing. So if only I could select all albums at once, the whole operation could pretty much happen unattended at night. I can of course open all artists folder manually and it looks like that's what I will have to do but it would be nice to find a way of making my life just a bit easier.

Problem using Change production and SFC step status with Simultanious group

Hello,
We just upgraded to ME 5.2 SP5 patch which was released two days back, the problem with Simultanious group is fixed and SFC gets the correct next step as per defined in the router (Previously there was bug).
But when we try to use change production and put SFC in simultanious router at some particular operation as que it is getting in que at all operations and really can be started and completed even at the last operation.
Same is the case with step status if we put it in que at some intermediate operation all operation listed above are becoming in que irrespective of the flow defined in simultanious router.
Please let me know how to handle this.
Regards,
Pushkar Patil

Hi Pushkar,
It seems to be a bug. I would suggest opening a ticket on this.
Regards,
Alex.

Transport roles (with assigned group) containing folders and iviews

Similar Messages

Maybe you are looking for