Transport Routes STMS

I have EHP4 running on two different machines on same network. Each one has different host name, SID and instance number. I am not able to join them and create transport routes. In STMS I am choosing u201CExternal Systemsu201D!!!. I am not sure what I am missing in parameters. Please Help.

Hi,
In your case you can't have this bu as for the information External system is combine if real and virtual system where you can save and distribute among other system, Virtual - consider a scenario (Implementation stage) where you have only 1 system physically available ex, DEV but in future you have to build up QAS, PRD and more so here you can add your virtual QAS, PRD, Domain links are used when you have multiple Domains available - Need expert advice on this as I have only theoretically aware of this
Regards,
Salim

Similar Messages

STMS Transport Route Administration - Import Targets not modifiable.

Hello. I'm trying to configure cCTS for use with CHARM. I have created my system clusters and defined a consolidation and delivery route for the clusters. Now when I double click on my clusters in edit mode and navigate to the Import Targets tab, I am not able to modify this tab. I have been following the cCTS for CHARM and QGM Configuration guide.

Thanks Jessica
I'm also working with OSS SAP Support now to try and resolve my issue.
In short I can some up the problem and testing completed so far.
To Start:
The Server group removed old QA server from our SAP Landscape, therefore STMS Transport Route required rebuilding.
Systems:
We have a very complex system setup with SAP R3, CRM and BW systems. Each system has it's own server (Dev = R3D, CRD & BWD, QA Testing is now = R3T, CRT & BWT, Production = R3P, CRP & BWP) The Original QA servers are now being removed (R3Q, CRQ & BWQ)
CRD is the Transport Domain Controller, with transport bins located on CRD for R3D & BWD, CRT for R3T & BWT and CRP for R3P & BWP. (Firewalls and Server locations are the root cause for the different Trans Directories)
Transport route:
Transport route for SAP R3 was: R3D -> R3Q -> R3T & R3P (in a delivery group). The new Transport Route needs to be R3D -> R3T -> R3P.
Main Problem now: With the Transport Route configured like R3D -> R3T -> R3P, any new transport requests created in R3D moves to the R3T Import Queue automatically when the transport is released. Once the transport is successfully imported into R3T, it should automatically be added to the R3P Import Queue, but does not.
Present work around: I've reconfigured the Transport route to R3D -> R3T & R3P. Any tranport request once released, is successfully added to both the R3T & R3P Import Queues.
I have checked all SAPService<sid> OS users and passwords, ensured that the TMSADM user was recreated and working on each of the systems, used telnet to log onto each of the servers from each of the other servers at the OS level (to ensure it's not a landscape firewall security issue), I've also checked all RFC connections in the same manner (to ensure each system can reach the others), recreated the route from R3T to R3P as both a Consolidation and a Delivery type of route,
I will post any resolution found later.
Thanks for the help anyway

STMS TRANSPORT ROUTES VIEW

Hi,
Can somebody know how we can save transport routes view in stms to file (visio for exemple) ? thanks in advance.
Regards
Sidi

Hi,
I have access to sevral landscapes and same problem and regarding your propositions:
1/ System>List........>local file not available on yhis view
2/custo of local setting no results
3/print screen will not print all the view and even will no allow to modify the out put
For visio was juste example if i can have it on world also will solve the problem.
Regards
Sidi

Is transport route necessary to make tp show up at STMS buffer?

Good morning:
We added a real extra system as this: dev->qa->prod->"extra system".
There is a delivery route (NOT transport route) between prod->"extra system".
However, the transport imported into prod
1) shows up in "extra system"'s buffer at OS level (i.e. using "tp showbuffer ...);
2) does NOT show up at STMS "extra system"'s buffer (i.e. NO show at GUI level).
Is a transport route absolutely necessary between "prod->extra system" in order to correct this?
Thanks!

Hi,
Ok, but regarding 1st point, do the system belong to the same transport group? If these share the same transport directory they should. You can check the transport group in STMS-> System Overview.
Also perform the following checks in STMS -> System Overview:
Select all the systems, then:
SAP system > Check > Perform the three checks there.
Do you see any error?
Br,
Javier

STMS-Transport Routes creattion

Hi Friends,
Please clarify my question regarding transport routes. We had total 4 systems in our landscpae like ECC-dev,Qas,Trn and PRD.
as usually the old transport connections are existed beteen "dev-qas" then "qas to trn" and "prd".Now we want to create new
transport route between dev to TRN directly due to new functional developement. I don't want to touch eixted connections
because these new transport route is temporary only. If I create this transport path between dev and trn, is there any impact to
existed connections? How can I create this path, Please advice on this .
Thanks.

Hi,
I don't think you can add same system twice in transport routes.
And if you want to change existing one, check below link:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a2a27acc11d1899e0000e829fbbd/frameset.htm
Thanks
Sunny

ChaRM transport route, one development, 2 QA, 2 PRD system landscape

Hello,
We have a customer who has an ERP system with a transport route which is the following:
One single Development system which feeds, 2 QA systems and then 2 PRD systems.
We are to implement ChaRM and we want to customize the tickets so that every time you execute the import action of a transport request into QA (and later into PRD) both systems QA1 and QA2 are updated and later on with PR1 and PR2.
We would like to know how to support this scenario in Solution Manager using ChaRM. How do we set up the logical component at SAP, how we define the transport route and layers, and how we define the actions in the SDHF ticket.
I appreciate your help.
Regards
Esteban

Hello,
We set up a testing environment for change request management. In a solution manager we created five clients. One single development which feeds two quality systems, and final two production system. As it was said in the thread we used transport groups in the transport route. The development system feeds this transport group which feed to import queus in quality systems. We tested this transport route and transports worked well and arrives into both production 1 and production 2 systems.
Then created a logical component for that landscape, with five sytems. Then we created a maintenance project using that logical component. We created a maintenance cycle and then a task list was created which shows two delivery system, and the two productive systems. All the groups have the right actions.
However when we created a SDHF correction the system creates the task list only for 3 systems, not for the five of them.
we see that only action groups are created for development, quality 1, and production 1. No entries for quality 2 and production 2
We try to run the action which is in the general part of the task list to execute the import in multiple systems, it cames out with the correct selection of importing in quality 2 system because it is the transport group. However an error is raised saying that the actions for quality 2 are not there in the task list which is true. Finally, as short term solution, we were able to import into quality 2 and later on pr1 but done manually in the stms transactions which is not what we want to do.
Regards
Esteban Hartzstein
Edited by: Esteban Hartzstein on Aug 24, 2010 2:06 AM
Edited by: Esteban Hartzstein on Aug 24, 2010 2:07 AM

What's the difference between transport route and transport layer

what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

Hi,
Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development
    work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport
    layer.
    The transport layer determines whether objects are assigned to a local
    or transportable change request.
Use
    Each of your SAP development systems is assigned a transport layer as
    its standard transport layer. If you use Extended Transport Control, you
    can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o   If a consolidation route originating in their SAP System is defined,
     then the objects are assigned to a transportable request, and
     transported into the consolidation target when it is released.
o   If a consolidation route is not defined, the objects are assigned to
     a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
     The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
     Release 4.0A and cannot be maintained.
Regards
Ben

How can I add a system to the transport route?

Hi,
 I have a DBP --> PBQ --> PBP systems and now I have a new environment TRN (Training system) and I want to include this system in the transport route.
Right now the transport route is configured like I said 'DBP --> PBQ --> PBP' and I want to include this environment (TRN) to the transport route because I want that the system pass automatically the orders that going to PBP system to TRN too in the same time that pass it to PBP. For example, like this:
 PBP
DBP --> PBQ ==>
 TRN
How can I do that?
<removed_by_moderator>
Read the "Rules of Engagement"
Thanks people!!
Edited by: Juan Reyes on Apr 16, 2009 8:57 AM

Hi Carlos,
whatever be the environment, whether it is DEV, QA or PRD, when you login into an ABAP SAP system and run transaction STMS,
In the initial screen, it always shows two fields, System and Transport domain.
System field contains the SID in which you are currently logged in.
Transpor Domain shows value like this: DOMAIN_SID
here this SID is the domain controller for the system in which you are logged in
However, if you are logged in the domain controller system itself and then run STMS, then it will show in the lower half of the screen, that, you are logged in as a Domain Controller.
To be more clear, run STMS in any system and Menu->Overview->Systems->Second column 'TMS system type' must contain a 'domain controller symbol' against one sytem SID. this SID is the domain controller.
thanks
Bhudev

ChaRM: transport route migration

Hi!
we have a lot of different transport routes with different transport layer and would like to implement ChaRM.
We have a lot of different transport routes with different transport layer where we assign the developer classes/packages.
Now we would like use ChaRM.
As we know ChaRM uses standard transport layer and transport route.
Therefore we plan to consolidate all the developer classes/packages assigning to none-standard transport layer and route and migrate them to standard transport layer and transport route
Questions:
1) Can some one confirm whether or not ChaRM uses the standard transport layer with standard transport routes?
2) Or is it possible to create own transport layer u201CZCRMu201D, assign them all the development class/package relevant for ChaRM and leave the other none-transport layer unchanged?
3) Can one development class/package be assigned to several transport layers?
4) Has some one experience dealing with the approach of migration?
(tcode SE16 --> T_DEVC)
It will be great get some information regarding these questionsu2026
Thank you very much!

Hello,
We set up a testing environment for change request management. In a solution manager we created five clients. One single development which feeds two quality systems, and final two production system. As it was said in the thread we used transport groups in the transport route. The development system feeds this transport group which feed to import queus in quality systems. We tested this transport route and transports worked well and arrives into both production 1 and production 2 systems.
Then created a logical component for that landscape, with five sytems. Then we created a maintenance project using that logical component. We created a maintenance cycle and then a task list was created which shows two delivery system, and the two productive systems. All the groups have the right actions.
However when we created a SDHF correction the system creates the task list only for 3 systems, not for the five of them.
we see that only action groups are created for development, quality 1, and production 1. No entries for quality 2 and production 2
We try to run the action which is in the general part of the task list to execute the import in multiple systems, it cames out with the correct selection of importing in quality 2 system because it is the transport group. However an error is raised saying that the actions for quality 2 are not there in the task list which is true. Finally, as short term solution, we were able to import into quality 2 and later on pr1 but done manually in the stms transactions which is not what we want to do.
Regards
Esteban Hartzstein
Edited by: Esteban Hartzstein on Aug 24, 2010 2:06 AM
Edited by: Esteban Hartzstein on Aug 24, 2010 2:07 AM

Need Transport route for two systems(Urgent)

Hi All,
I have configured everthing like configuring domain controller and added to to domain controller.
Now i need to do below steps
I have Development (client) and Quality(client) in same system and Production as separate server.
I want to configure transport route from Development client to Quality client and from Quality client to Production Server.
Development Server SID is DEV ( Dev Client 100 and Quality Client 140) and Production Server SID is PRD
Transport route must be configured like below:
DEV( Dev client 100) -> DEV (QAS client 140) -> PRD
We are struck with this
Best Regards,
Pratyusha

Hi Pratyusha,
As far as configuring Development and Quality systems concern, in one system is not suggested. I think you are aware of this.
However, I need some more information on your question like the operating systems which you are using in DEV/QAS and in PRD.
First, configure the Domain Controller in either DEV/QAS or PRD.
Irrespective of the OS, you need to maintain IP address along with the host name and fully qualified domain in the etc/hosts file.
for example DEV/QAS system ip address is 172.16.23.14 and host name is abc007, then you need to make an entry in etc/hosts file at the OS level as follows.
172.16.23.14 abc007 abc007.yourcompany.com
where in abc007.yourcompany.com is the fully qualified domain name.
Once you done this in both, DEV/QAS and PRD, systems, then configure 3 system landscape from STMS tcode in the other system which is not a Domain controller.
I hope this is helpful. Getin touch if you have any more questions or doubts.
Regards,
Satish.
Edited by: Satish Arram on Jul 31, 2008 2:06 PM

The TMS configuration is inconsistent and The transport route configuration

Hi,
I logged on domain controller in STMS in QA. I can see the following in STMS as
" The TMS configuration is inconsistent
The transport route configuration is inconsistent"
Users were able to do transports and there were no issues.
Transport routes
DEV>QA>PRD
TST(which is not active)
Environment:
Oracle: 10.2.0.4.0
Windows NT
Netweaver 70 ehp1 abap
Please guide me how to resolve the above issue.
Thanks and Regards
Satya

Hi,
Everything is tick marked.
Please find the output.
Check Transport Directory                                 03/30/2011 08:34:16
       QA1 CAL - Quality
           Transport Directory
               bin
sap2bksrv\sapmnt\trans\bin
               Create Test File
               Read Test File
               Delete Test File
          buffer
sap2bksrv\sapmnt\trans\buffer
                Create Test File
                Read Test File
                Delete Test File
          cofiles
sap2bksrv\sapmnt\trans\cofiles
               Create Test File
               Read Test File
               Delete Test File
         data
sap2bksrv\sapmnt\trans\data
              Create Test File
              Read Test File
              Delete Test File
         log
sap2bksrv\sapmnt\trans\log
             Create Test File
             Read Test File
             Delete Test File
         sapnames
sap2bksrv\sapmnt\trans\sapnames
             Create Test File
             Read Test File
             Delete Test File
         tmp
sap2bksrv\sapmnt\trans\tmp
             Create Test File
             Read Test File
             Delete Test File
Thanks and Regards
Satya

How to remove transport route version

Hello,
I had an issue with my STMS. I have saved some transport routes versions.
How can delete them ? Do you know the table name to remove entries in this table ?
1. STMS
2. Oveview - Transport Routes
3. Configuration - Get Other versions
Here, I get various transport routes versions, but I would like to remove most of them.
Do you know how ?
Best regards
OC

Believe it is TCEVERS
Do look at the table in SE16 and confirm the entries
Pravin

Make the transport router graphical editor show up

On STMS, once I click the transport router button, I should see the the transport router graphical editor directly.
However now I see a list of items. I have to select "go to-> graphical editor" in order to see it.
Could you tell me how to make it default? My TMS configuration is free of error.
Thanks a lot!

Hi,
For you solution is
Go to STMS >Extra>Setting-->Transaport routes
Here select Graphical editor.
Revert once done!
Regards,
Gagan Deep Kaushal

Unable to add transport route in HANA Application Lifecycle Management (XS)

Hi There,
When we are using HANA LM to create transport routes then routes are created but straight away it comes with following error message:
Internal Error: Transport Route(s) could not be retrieved.
We have checked that required roles are assigned to user. Roles are
sap.hana.xs.lm.roles::ExecuteTransport
or
sap.hana.xs.lm.roles::Administrator
Same works in DEV and PROD environment. I ran debug in Chrome and found that it is throwing an error when trying to run following:
http://XXXX:portnumber/sap/hana/xs/lm/core/transport.xsjs?enrich=true&_=XXXXXXX
After looking in HANA studio I have found that transport.xsjs has got following function which will throw above error on exception:
function retrieveTransport(req, res) {
if(!utils.checkForPrivileges(res, [ "sap.hana.xs.lm::Display"])){
    return;
var item = utils.getItem(req.path);
var enrich = req.parameters.get("enrich");
var deleted = req.parameters.get("removed");
try {
    if (typeof item === 'undefined') {
      var transportRoutes = trans.readAllTransports(deleted);
      if (enrich) {
        enrichTransportRoutes(transportRoutes,deleted);
      utils.setNoCacheHeaders(res);
      res.contentType = 'application/json';
      res.setBody(JSON.stringify(transportRoutes));
      res.status = $.net.http.OK;
    } else {
      // retrieve transport path id
      var tpath = trans.readTransport(item);
      if (!tpath) {
        utils.reportError(res, null, utils.getText("TRANSPORT_ID_INVALID", item));
      } else {
        res.contentType = 'application/json';
        res.setBody(JSON.stringify(tpath));
        res.status = $.net.http.OK;
} catch (ex2) {
    utils.reportError(res, null, utils.getText("ROUTES_NOT_RETRIEVED"), ex2.toSource());
Please see attached chrome console log for more info:
I am able to retrieve information about this but I am not sure what is causing this. Your help will be really appreciated.
Regards
Angad

I've also tried the following wlst:
createJCRFileSystemConnection(server='SERVER-MS1', appName='application', name='Repository', path='/APP/ContentRepository/')
But then i'm getting:
java.lang.UnsupportedOperationException: Could not find MBean operation "createConfig(java.lang.String)" for MBean registered under "oracle.adf.share.config:ApplicationName=application,name=ADFConfig,type=ADFConfig,Application=application" and implementd by "class oracle.adf.mbean.share.config.RuntimeMXBeanImpl"
Error in creating configuration with name "oracle.adf.mbean.share.config.runtime.webcenter.doclib.AdfDoclibConfig"
java.lang.UnsupportedOperationException: Could not find MBean operation "refresh()" for MBean registered under "oracle.adf.share.config:ApplicationName=application,name=ADFConfig,type=ADFConfig,Application=application" and implementd by "class oracle.adf.mbean.share.config.RuntimeMXBeanImpl"
An error occurred while performing "setAttribute" on "PrimaryConnectionName"
javax.management.RuntimeMBeanException: These mbeans encountered exceptions and may not have been saved
Repository- JCR -- Could not do this operation, the backing store for this context is read only.Edited by: Harry van Oosten on May 10, 2010 10:33 PM

COMPUTE_BCD_OVERFLOW error while saving transport routes

Hi,
When we are creating new transport routes with domain controller ABC. It is giving the above dump.
Dont know what to do. FYI we deleted previous TMS config and created new one.
Thanks,
Rohan

Check the values which you are passing to the BDC.. the data type should be changed for a field.
You can execute the BDC with mode 'A' & check.
Best regards,
Prashant

Transport Routes STMS

Similar Messages

Maybe you are looking for