Transport RSDS Datasources

Hi,
We replicated datasources from ECC into BI. They are captured in a transport.
Is there any difference in transporting a BI datasource if
1. If it has been replicated as a new datasource?
2. If it has been replicated as a 3.X datasource and later migrated to a BI datasource?
This is not an upgrade.
Thanks.

Nope, there is no difference as long as it has been replicated before it gets transported.
Always make sure your datasource is migrated to the 7.0 version before transporting Transformation.
thanks.
Wond

Similar Messages

Error while transporting webservice datasources

Hi all,
I have created webservice datasources to fetch EP data to BW. and now i am transporting that Datasources from DEV to QA. I have colllected datasources alone in one req. (source system i have created in QA manually and i mapped that with DEV)
But while transporting i am getting the folllowing error,
3S3T   Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Error Screen output without connection to user .
Error when activating DataSource ZANS_MASTER BI7001
Please through some light is there any predefined settings i need to do in QA system?.
Thanks in advance,
V.Sen

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Transporting Webservice DataSources -

Hi
We are unable to successfully transport any of our webservice Datasources, or anything related to them. The tansport logs are not giving any exact clue about why the error is occuring, and what we can do about it...
Is there any specific technique/ process to be followed for transporting Webservice Datasources?
Please give us some clue on this... as our transport is stuck because of this.
Thanks in advance.
Sushmita

Hi,
How about applying note 1035311? and please check note 942081 too.
Regards,
Masaaki

Question on transporting a datasource on R/3 side

I have enhanced the extract structure (added one new field) of a sap delivered data source in r/3. So how do I transport this DS? if I just transport the datasource (0FI_FM_2), does it also include the append structure(new field) automatically.
So Please let me know the procedure (step by step) to transport a enhanced datasource from DEV to QA...
Thanks in advance,
Points are assured....

Hi Kalyan,
If I enhance the extract structure of a datasource, I just have a append structure right?
Is it not enough to just transport the DS itself and the append structure?
Thanks,
Sirish.

Problem while transporting generic datasource to test box

Hi Gurus,
I am trying to transport Generic datasource from SCM Dev to SCM Test box. Datasource is created with custom table in SCM.
It is throwing me RC8.
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
DataSource ZGATPUPLOAD does not exist in source system TA6CLNT010 of version A
Mapping between data source ZGATPUPLOAD and source system TA6CLNT010 is inconsistent
DataSource ZGATPUPLOAD does not exist in source system TA6CLNT010 of version A
Field /BIC/ZCSHIPTO will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field CALWEEK will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field FIXPEGQTY will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field LOC will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field MATNR will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field PROD_ALLOC_OBJEC will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field SALESORG will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field SALES_DIST will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field SIMID will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field USER_MOD_QTY will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
Reference to transfer structure ZGATPUPLOAD_CA not available. No activation possible.
Please give me suggestions....

Are you still looking ans on it?

Transport SOAP datasources

Hi,
I've problem with transport SOAP DataSource. I've created InfoSource, Create DataSource with SOAP, etc. always write package and request. Everything works OK.
But after import from DEV to QAS i've error:
"Extract structure ZOXPBW0027 is not active. "
and
"The extract structure ZOXPBW0027 of the DataSource 6AZKJ_XML_Z is invalid".
This extract structure of course doesn't exist in QAS.
In DEV when I check directory entry, error message appears: "Object directory entry R3TR TABL ZOXPBW0027 does not exist".
Is this structure generated for data source ? (has system name "PBW" in name)
Should I set request for extract structure and transport ?
Regards
Jarek

Thanks Edan,
I've made it. But extract structure in QAS can't be activated, there is 1 warning:
"Enhancement category for table missing ", I thing, there is no problem,
and few errors:
"Field /BIC/ZKJ_XML: Component type or domain used not active or does not exist"
"Field TXTSH: Component type or domain used not active or does not exist"
"Field name /BIC/ZKJ_XML lies in external or unknown namespace but is valid".
Field data type are /BIC/OW_BICZKJ_XML_OI and /BIC/OW_TXTSH_OI.
Domain for both is /BIC/VCHAR_000020_000000 and exists.
I can't change package and transport this data type because of namespace.
This data tapes have Generation flag.
Regards,
Jarek

Transport Error - Datasource not available in the target system

Hello exports,
-- We have a custom Inboject zvendor
-- text master data is coming from 0vendor
-- need to transport the datasource 80vendort of the datamart + some other objects along with it.
-- transport from CLDEV1 to CLQLT1
-- included: datasource 80vendort, trasnfer structure, transfer rules.
-- error: Datasource 80vendort does not exist in the source system CLQLT1 of version A.
-- could you please suggest me if i have missed something in here.
Measures taken:
-- i have tried doing generate export data source in the CLQLT1 system also.
-- replicated the datasources for the self source system in CLQLT1.
-- observed that the datasource 80vendort is not yet visible in datasource overview of the self source system of CLQLT1.
Solution:
-- create a new tranport only for the datasource 80vendort, transfer structure and transfer rules.
Wondering if this solutions would work. Is there any thing I am missing...?
Please suggest. Any suggestions are highly appreciated.
Thanks,
Sweatha.
Message was edited by: Sweatha Mohan

Hi Sweatha,
When we are transporting data source, did you know that we should first transport the data source from R/3 DEV to R/3 QA (Source Systems) and replicate them to BW QA later on?
Because if we transport BW Objects first, we will get similar errors such as what you have experienced.
Hope it helps and if it did, award me points...
--Jkyle

Transporting SOAP Datasources

Hi Friends,
I have an interface XI to BW. Design and development completed in DEV. For this we used SOAP datasource (6AZSAP_XI).
I tried to transport datasource to QA from DEV. but i am unable to do it.
Please let me know the process. How can we do this. Some of the blogs saying that not possible to transport soap datasource to QA.
Then how can we do this. do i have to create in QA. or is there any other options. I don't have the create authorizations in QA.
Please help us on this.
advance thanks
Sati

Hi
Even im not sure about this transportation. But if you go thru the above discussion link..check "Pankaj Unhale" comments!!
you just need to transport your Infosource.
Also SAP Note: 858783
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383538373833%7d
Regards
Ramg
Edited by: Ramkumar Ganesh on May 17, 2010 8:20 PM

I want to transport 3 datasource can i transport at a time 3 datasources

hai
i want to transport 3 datasources can i transport 3 datasources at a time otherwise transport one by one. If transport 1 by 1 u can give same package and transport request
Thanks
ravindra

Hi Ravindra
Can you just make all the Data source under a single transport request and releas
that particular TR from Se01 and right click on the Tr u will get an option for relase
and chek the DS wether they are transported or not once its done then transport
the remaining part like Trules and ODS or CUbe and its update rules Subsequently.
Regards
R M K
Assining points is the only way of saying thanx in SDN ***

Transport RSDS

Hi ,
How to create transport order for RSDS Data source , with replication . Steps will be helpful
Regards

hi Renjit,
you can use transport connection or SE03,
with transport connection, rsa1 - transport connection,
left panel choose 'object type', middle panel look for 'datasource(RSDS)',
expand and 'select', find your datasource, and 'transfer',
it will go to right panel, use groupind in dataflow before or only necessary objects,
click 'execute', and truck button, change package if it never been transported, and system will prompt request.
release request with SE10.
and import in data target with STMS.
hope this helps.

Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Error while transporting Generic Datasource in R/3

Hi All,
I have created a generic datasource(R/3) on a view. As it was in $TMP, I have assigned the datasource, ZABCD, and the view, ZVIEW to a devlopment package and also to a transport request. I released the Transport request and when I tried to import it into Q, it throwed me an error with below messages:
Extract structure ZOX**** is not active
The extract structure ZOX**** of the DataSource ZABCD is invalid
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L
The errors affect the following components:
BC-BW (SAP Business Information Warehouse Extractors)
The extract structure ZOX**** is the structure used by the datsource. I forgot to assign that to the earlier TR and I think the error is because the structure is missing in the TR. Am I correct?
How should I deal with it now? DO I need to create a new TR with this structure alone as the earlier TR is already released?
Thanks,
RPK.

As you comment it is possible error was not include the structure in earlier TR.
You can create, in se09 or se10, an empty TR. In these transactions you have a buttoun with a box drawed. Set focus on your new empty TR and push button.
Add object from TR transported with error and the missed structure.

Transport error: Datasource not appearing in PROD

Hi gurus
            Regards.I Transported a CL(Classification datasource) from DEV to PROD.But the import ended with a (class 4)warning ;
ABAP DICTIONARY ACTIVATION : WARNING (4)
Following objects not activated/deleted or activated/deleted w. war
Table ZOXDEV0110 was activated with warnings
(W- Enhancement category for include or subtype missing )
      Final log
*End phase 002 *****************************************************
Hence am unable to see them in RSA6 in PROD...Would appreciate ur valuable inputs on this...
Manythanks
Arun

Hi guys
          The problem is solved..
The particular Datasource was locked in Identical Request(found out that in RSA6 - Datasource - Object Directory - Lock overview)..Then unlocked them DS in SE03.Deleted the old request and Now assgnd the DS to a New Request and Transported.Its seated fine,this time around in PROD..
Cheers
arun

Transport 2LIS datasource

we have used the 2LIS_02_ITM datasource in Production for sometime.
Now I have added a new field to the 2LIS_02_ITM.
How can I transport this 2LIS_02_ITM into Procdution?
What should I do before/after?
Please help, thanks.

Ok, so basically we transport the whole datasource again.
If you want history data for this newly appended field, please delete contents from the Infoproviders and initialize your DS with data transfer option.
You mean I have delete the setup table, all the existing data in the DSO and InfoCube. Then perform setup table again?

Transport sequence datasources

Hi,
Can someone explain the follwoing please:
I am doing transports at the minute. My first task was to transport all R/3 reuqests from R/3 DEV to R/3 QA. I then replicated the datasources in BW QA. My datasources are the same in both systems, BWDEV and BWQA.
When I try to transport the Infocube and I select with data flow before, I get the option to select Datasources.
1. Do I need to select them in my transport and why?
2. What is the difference between the datasources in the R/3 system and the option I get in transporting datasources through BW? Is that for non-R/3 datasources?

Hi,
If you find that there is addition of New field in R/3 for that DS then you need to replicate the datasource from R/3 to BW and then you import the TR (recorded changes for the exsisting infosource in BW).
if there is no addition and only some modification in the coding and there is no addition of fileds in R/3 then replicate the datasource in BW and it is ready for extraction.
otherway if you need to transport once again all the objects then select all source depended objects for transports.

Transport RSDS Datasources

Similar Messages

Maybe you are looking for