Transport Sapscript form issue
Hi friends, I trying to transport a Sapscript form from DEV100 to QAS400. I changed it and save on a request, so I went to stms and made a import but the form don't update inn QAS. I tried use RSWBO052 too, but without sucess. Whats I doing wrong?
Thanks!
Hi,
From the development and staging servers mentioned, it looks like developmet has client 100 and staging has client 400. Usually, the same client is used in SAP Landscape from dev to stag to prod.
Confirm from BASIS that your path for transport is configured from DEV client 100 to QAS client 400. If not, it may be the case that transports are happening on one of the same clients, either 100 or 400.
Since SAPScripts are client dependent, in such a scenario, you will have to get the SAPScript transported to the needed client in dev itself first. You can use transaction SCC1 for this.
Regards,
Shiva
Similar Messages
-
How to create a transport for SAPscript form
Hi Gurus,
Good day!
I would like seek an expertise from you guys on how i'll be able to create a transport for the SAPscript form. The form has already been copied from the other boxes by running the program RSTXSCRP.
Appreciate your help. Thanks in advance!
Cheers,
Virgiliohi,
First u create the driver program of the sapscript...ok..
then go to the SE93 and create the T_code of that driver program..
Hope This helps
Regards
RItesh J -
SAPScript form coding changed automatically during transport
Hi,
I have developped a SAPScript form in dev. and worked well.
After I had transport it to testing environnment to test it there, I found out that my SAPScript coding
was modified: some new lines code have been added replacing the original code while others have been just deleted.
When I checked the attribute of the SAPScript, I notice that these modifications have been added automatically by user DDIC!
I really do not understand how this could be.
Any idea is welcome.
Thanks,
CharasHi Charas,
Note that SAPScripts are client specific, so make sure you import your script to each and every QA client. Inform your basis that the transport is not a cross client object. So, he will import to all the QA client.
Or check with your Basis, to which QA client the transport has been imported to, go to SCC1 transcation code and copy it over to required QA client.
I guess, above information will help you to close the thread.
Regards,
SaiRam -
Issue with displaying type p in sapscript form
Hi experts,
How can I display data of type p so that it doesnt appear with too many leading spaces in a SAPScript form. I would like the data to fit in 1 page without the numbers going to the next line becoz there are too many spaces. I have difened the variables as var(6) type p decimals 2.
Please Help.
Regardsjust before using it when you pass &itab-p1& to the text field
rather than this put a code element before this, in which assign these two some strings like
data: s1 type string,
s2 type string,...
s6 type string.
s1 = itab-p1.
s2 = itab-p2.
s3..
s4.
and
pass &s1& , &s2& to the output text fields... -
Hello guys,
Please help me on below issue...
I have developed one smart form in sandbox i want to transport it into the development server. Please let me know the possible ways.
immediate solution will be apreceiated
thanks for your time adn cooperationSAP SMART FORMS AND SMART STYLES ARE STAND-ALONE DEVELOPMENT OBJECTS. THIS MEANS THAT FOR EVERY SMART FORM AND FOR EVERY SMART STYLE A TADIR ENTRY IS CREATED. THE CORRESPONDING TRANSPORT OBJECTS ARE CALLED
SSFO FOR SMART FORMS (R3TR SSFO NAME)
SSST FOR SMART STYLES (R3TR SSST NAME)
MIGRATING SAPSCRIPT FORMS
UTILITIES -> MIGRATE SAPSCRIPT FORM.
FOR MASS MIGRATION, SF_MIGRATE.
MIGRATING SMARTFORMS
CHOOSE UTILITIES ® MIGRATION ® PDF-BASED FORM ® EXPORT.
TRANSPORTING SMART FORMS
A SMARTFORM IS TRANSPORTED NO DIFFERENTLY THAN ANY OTHER OBJECT. IF IT IS ASSIGNED TO A DEVELOPMENT CLASS THAT IS ATTACHED TO A TRANSPORT LAYER, IT WILL BE TRANSPORTED. THE DEFINITION IS TRANSPORTED, AND WHEN CALLED, THE FUNCTION MODULE IS
REGENERATED. THIS LEADS TO AN INTERETSING SITUATION. ON THE NEW MACHINE, IT IS VERY LIKELY THE FUNCTION MODULE NAME WILL BE DIFFERENT THAN THE NAME ON THE SOURCE SYSTEM. MAKE SURE, BEFORE YOU CALL THE FUNCTION MODULE, YOU RESOLVE THE EXTERNAL NAME TO THE INTERNAL NAME USING THE 'SSF_FUNCTION_MODULE_NAME'
FUNCTION MODULE. TYPICALLY, GENERATE THE SF, AND THEN USE THE PATTERN TO BEING IN THE INTERFACE. THEN CHANGE THE CALL FUNCTION TO USE THE NAME YOU GET BACK FROM THE ABOVE FUNCTION MODULE.
Please reward points if useful. -
Addint new field to the standard sapscript form.
FOR SALES INVOICE DOCUMENT FORM PRINTING
TRANSACTION CODE: VF01
OUTPUT TYPE : FJCI
PROGRAM NAME: RVADAUS1
SAPSCRIPT FORM NAME: SD_EXPORT_FJCI
ENTRY ROUTINE: ENTRY_FJCI.
STRUCTURE USED FOR THIS OUTPUT TYPE = V55EFJCI
THE QUERY IS AS FOLLOWS:
I WANT TO ADD DATA MODE OF TRANSPORT FROM THE INVOICE DOCUMENT. THE TABLE AND FIELD IS T618-BEZEI.
SO I COPIED THE STANDARD FORM TO ZSD_EXPORT_FJCI AND THE STANDARD PROGRAM TO ZRVADAUS1.
I SUCCESSFULLY FETCHED THAT FIELD DATA.
I APPEND THE STRUCTURE 'ZAV55EFJCI' TO ADD THE ADDITIONAL T618-BEZEI FIELD.
AND WRITE MY SELECT QUERY IN THE ENTRY_FJCI FORM ROUTINE.
THE CODE IS AS FOLLOWS:
data: begin of it_mode_of_tp occurs 1,
bezei type t618t-bezei,
end of it_mode_of_tp.
select a~bezei as zzbezei into table it_mode_of_tp from t618t as a
inner join
eikp as b on aexpvz = bexpvz and aland1 = baland inner join vbrk as
c on bexnum = cexnum
where cvbeln = nast-objky and aspras = nast-spras .
loop at it_mode_of_tp.
v55efjci-zzbezei = it_mode_of_tp-bezei.
endloop.
BUT THE DATA FOR THAT IS NOT GETTING DISPLAYED.
THIS WAS THE FIRST METHOD I FOLLOWD.
THE SECOND METHOD I DID WAS AS FOLLOWS:
FORM ENTRY_FJCI.
PERFORM PROCESSING.
ENDFORM
FORM PROCESSING.
PERFORM PRINT_DOCUMENT.
ENDFORM.
FORM PRINT_DOCUMENT.
CALL FUNCTION 'RV_EXPORT_DOCUMENT_PRINT'
ENDFORM.
IN THIS FUNCTION THE DATA IS GETTING FETCHED FROM THE DATABASE TABLES AND STORED IN THE STRUCURE V55EFJCI.
SO I COPIED THAT FUNCTION.
IN THIS FUNCTION , THEIR IS A INCLUDE PROGRAM 'LV55EF11' FOR FETCHING DATA FOR ENTRY_FJCI FORM ROUTINE.
I COPIED THAT PROGRAM CODE , AND CREATED MY OWN INCLUDE PROGRAM (WHICH I AM STORING IT IN ANOTHER Z PACKAGE.)
AND WRITTEN MY ABOVE CODE IN THAT PROGRAM. BUT WHEN I DO THIS, NOITHING GETS DISPLAYED , EVEN THE PREVIOUSLY COMING DATA ALSO NOT GETTING DISPLAYED.
HOW SHOULD I PROCEED.you said you copied layout(form) SD_EXPORT_FJCI to ZSD_EXPORT_FJCI,
you updated program to fetch datat & populate v55efjci-zzbezei field.
Now
- you need to modify layout(form) ZSD_EXPORT_FJCI via SE71 to insert your field in one of the windows where it has to be printed (sap script knowledge is required here).
- you need to either modify SAP output type FJCI to use your program/layout(form) or you need to create your own output type and assign your form/program to it, and in addition to that if you define your own output type - yo have to add it to output determination procedure, to access sequences, add condition records to condition table... so it's picked up by the invoice. -
Error message while transporting SapScript to productive system
Hi,
I have tried to transport an order sapscript form (modified Medruck) into the productive system. But I got errors in transaction stms.
The error message is displayed like this:
<b>R3TRFORMZMEDRUCKN</b> was repaired in this system
Message no. <b>TW 104</b>
<b>Diagnosis</b>
Object R3TRFORMZMEDRUCKN is in repair status. Therefore, it cannot be imported.
<b>System Response</b>
The object is not imported.
<b>Procedure</b>
If you still want to import the object, release the relevant repair andrepeat the import.
Does anybody know something about that problem?
CheersHi,
maybe somebody has already create your form in the productive system. Now you would like to create something already created.
Maybe, you have to check in the TADIR table (key R3TR / FORM / name of the form) if the form already exist. What is the system source for the form. (in the PROD)
And finaly, you can go to the SE03, select the first line and execute (to find object R3TR FORM ..) in all the request order. That will show you who has play with this form, and if a request was lost between DEV & PROD. (in the DEV)
Rgd
Frédric
Message was edited by: Frédéric Girod -
How to disable debugger for sapscript forms.
How to disable debugger for sapscript forms.
Once activated in se71-Utilities-Activate debugger I do not know how to disable itThank you Rich
I assigned you points for good answer on my preavious mail)
. Actually my real problem is a transported the SAP script form znalepke2 , printer definition nale
and device type zststartsp of a thermal printer.
On original system (ak1) the printout is ok but on target system(ak2)
not.
Lateron I transported also :
R3TR SCPD 1403(as the device type uses this character set)
R3TR TABU TSP08 (All entries)
R3TR TABU TSP1D(All entries)
R3TR TABU TSP1T(All entries)
I used also report RSTXSCRP to traport form and device types. L
Lately I discovered that when I performe printout preview I get also eronneous printout If I ssue an printout preview in language "EN" on system "ak1"(only on system ak1 and form preview in "SL" is oK. What steps you suggest me to solve the prolem
Thank you in advance -
How to change the Development Class of the SAPSCRIPT FORM
Hi All,
I have transported the old form which needs to be deleted in Test System. Is that possible to create a TR for deletion and send it to Test enivronment?..
Also is it possible to change the development class for a form?
Please help me on this. Urgent!...
Regards,
Ramkumar.Yes, it is possible to change the development class for forms..
Use SE03, transport organiser tools
goto node OBJECT DIRECTORY ENTRY
select node "Change object directory entries"
Execute
goto the next text box after data element, type FORM, give your SAPSCRIPT form name and tick the check box execute... now rightclick on your form and chenge development class..
Now coming to your second question is is not possible to delete a FORM that it is already transported to QA and Production, only way to do this is by doing client copy.. basis will do it for you..
Close the thread once your question is answered.
Regards,
SaiRam -
How Sapscript form can be send by mail
Hello all,
I want to send a Sapscript form by mail.
I think it should first be converted to PDF form and than need to be send by mail.
I have created a z form which is a copy of standard for medruck and also have changed the standard program SAPFM06P. So I need to add functionality in z program so that i can send the sapscript form by mail.
Can any body let me know the complete process how can i do it?
ThanksHi,
Just follow the below code . I am giving the code which starts from OPEN_FORM. After that one submit program is there u can see the code.
*& Form display_layout
text
--> p1 text
<-- p2 text
FORM display_layout.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
device = 'PRINTER'
DIALOG = 'X'
form = 'YFIL_DUNN_01'
LANGUAGE = SY-LANGU
options = itcpo
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
canceled = 1
device = 2
form = 3
options = 4
unclosed = 5
mail_options = 6
archive_error = 7
invalid_fax_number = 8
more_params_needed_in_batch = 9
spool_error = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT i_tab INTO wa_tab.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = '531'
FUNCTION = 'SET'
TYPE = 'BODY'
window = 'MAIN'
IMPORTING
pending_lines = wa_tab.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
result = itcpp
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
OTHERS = 5.
IF sy-subrc = 0.
IF ( itcpp-userexit IS INITIAL AND
NOT itcpp-tdspoolid IS INITIAL ).
p_spool = itcpp-tdspoolid.
SUBMIT yfir_mailsend_pdf_attachment WITH p_spool = p_spool
WITH p_kunnr = p_kunnr.
ENDIF.
ENDIF.
ENDFORM. " display_layout
*& Form modify_duedate
text
--> p1 text
<-- p2 text
FORM modify_duedate.
SELECT SINGLE mat_rec_no
mat_rec_date FROM yfi_matno
INTO (v_mat_rec_no, v_mat_rec_date)
WHERE vbeln = wa_tab-vbeln.
CHECK sy-subrc EQ 0.
SELECT SINGLE zterm
FROM vbrk INTO v_zterm
WHERE vbeln EQ wa_tab-vbeln.
CHECK sy-subrc EQ 0.
SELECT SINGLE zdays
FROM yfi_payment INTO v_zdays
WHERE zterm EQ v_zterm.
IF sy-subrc EQ 0.
wa_tab-zfbdt_due = ( v_mat_rec_date + v_zdays ).
wa_tab-due_days = ( sy-datum - wa_tab-zfbdt_due ).
IF wa_tab-due_days LE 0.
wa_tab-due_days = 'N/A'.
ENDIF.
IF ( wa_tab-umskz = 'A' AND wa_tab-shkzg = 'H' ).
wa_tab-zfbdt = ' '.
wa_tab-zfbdt_due = ''.
wa_tab-due_days = ''.
ENDIF.
MODIFY i_tab FROM wa_tab INDEX sy-tabix.
CLEAR: v_mat_rec_no, v_mat_rec_date, v_zterm, v_zdays.
ENDIF.
ENDFORM. " modify_duedate
SUBMIT PROGRAM :
REPORT yfir_mailsend_pdf_attachment MESSAGE-ID yf.
*& Program Name : *
& Author :
*& Creation Date : *
*& Program Type : *
*& SAP Release : *
*& Description : *
*& Transport No : *
*& Transaction : *
*& Send document with OTF/ALI attachment from spool to externalreci-
*& pient. OTF/ALI document is converted to PDF/HTML format duringthe
*& SAPconnect send process.
*& This report serves as example documentation for the function
*& modules SO_NEW_DOCUMENT_ATT_SEND_API1 and SO_DOCUMENT_SEND_API1.
*& Following this example you should be able to develop your own
*& report to send documents with all kinds of attachments.
Creation of the entry for the compressed document
*& TABLES:
TABLES : kna1,
adr6.
*& INTERNAL TABLES:
***********PDF Declaration*******
DATA: BEGIN OF i_spool OCCURS 0,
rqident LIKE tsp01-rqident,
rqo1name LIKE tsp01-rqo1name,
rqclient LIKE tsp01-rqclient,
END OF i_spool.
*& VARIABLES :
DATA: client LIKE tst01-dclient,
name LIKE tst01-dname,
objtype LIKE rststype-type,
type LIKE rststype-type.
DATA: spoolno LIKE tsp01-rqident,
download TYPE c VALUE 'X', "AS CHECKBOX DEFAULT 'X',
p_file LIKE rlgrap-filename
VALUE 'C:\Invoice.pdf', "#EC NOTEXT
otf LIKE itcoo OCCURS 100 WITH HEADER LINE,
cancel,
pdf LIKE tline OCCURS 100 WITH HEADER LINE,
doctab LIKE docs OCCURS 1 WITH HEADER LINE,
numbytes TYPE i,
arc_idx LIKE toa_dara,
pdfspoolid LIKE tsp01-rqident,
jobname LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount,
is_otf.
Data Declaration
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
*objpack-head_start = 1.
*objbin = ' | '. APPEND objbin.
*DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
objpack-head_start = 1.
*& PARAMETERS:
PARAMETERS : p_spool LIKE tsp01-rqident NO-DISPLAY,
p_kunnr LIKE kna1-kunnr NO-DISPLAY.
*& M A I N P R O C E S S
*& START OF SELECTION.
START-OF-SELECTION.
SELECT SINGLE
adr6~addrnumber
adr6~smtp_addr
FROM adr6
INNER JOIN kna1
ON kna1~adrnr = adr6~addrnumber
INTO CORRESPONDING FIELDS OF adr6
WHERE kna1~kunnr = p_kunnr.
IF sy-subrc = 0.
Create receiver list
reclist-receiver = adr6-smtp_addr. "<-- customer address
reclist-rec_type = 'U'.
APPEND reclist.
ENDIF.
***Convert Spool request to PDF
PERFORM pdf_convert.
docdata-obj_name = 'MAIL_AEIW'.
docdata-obj_descr = 'Dunning'.
Main Text
objtxt = 'Hi,'.
APPEND objtxt.
objtxt = 'Dunning'.
APPEND objtxt.
objtxt = 'Regards'.
APPEND objtxt.
Write Packing List (Main)
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
Create Message Attachment
Write Packing List (Attachment)
att_type = 'PDF'.
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
*objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-doc_size = tab_lines * 255.
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 1.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = 'Attached Document'.
APPEND objpack.
*check for not maintaining customer address
IF reclist IS INITIAL.
MESSAGE e000 WITH 'Please Maintain Customer e-Mail ID'.
LEAVE LIST-PROCESSING.
ELSE.
Send Message
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel.6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
OBJECT_PARB =
receivers = reclist
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ELSE.
WRITE 'Mail sent successfully'.
ENDIF.
ENDIF.
WRITE: / 'End of Program'.
*& Form pdf_convert
text
--> p1 text
<-- p2 text
FORM pdf_convert.
DATA: date1 LIKE sy-datum,
time1 LIKE sy-uzeit,
period1 LIKE tsp01-rqcretime.
date1 = sy-datum.
time1 = sy-uzeit.
date1 = date1 - 1.
CONCATENATE date1 time1 INTO period1.
SELECT rqident
rqo1name
rqclient FROM tsp01 INTO TABLE i_spool
WHERE rqowner = sy-uname AND
rqclient = sy-mandt AND
rqident = p_spool.
IF sy-subrc <> 0.
WRITE: / 'No Spool Request created today'(003)
COLOR COL_NEGATIVE.
EXIT.
ENDIF.
SORT i_spool DESCENDING BY rqident.
READ TABLE i_spool INDEX 1.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = i_spool-rqclient
name = i_spool-rqo1name
part = 1
IMPORTING
CHARCO =
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP =
SIZE =
STOTYP =
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4.
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = i_spool-rqident
no_dialog = ' '
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
pdf_bytecount = numbytes
pdf_spoolid = pdfspoolid
OTF_PAGECOUNT =
btc_jobname = jobname
btc_jobcount = jobcount
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
CASE sy-subrc.
WHEN 0.
WHEN 1.
WRITE: / 'Error On Spool Job'(002)
COLOR COL_NEGATIVE.
EXIT.
WHEN 2.
WRITE: / 'No Permission'(003)
COLOR COL_NEGATIVE.
EXIT.
WHEN 3.
WRITE: / 'Conversion Not Possible'(004)
COLOR COL_NEGATIVE.
EXIT.
WHEN OTHERS.
WRITE: / 'Incorrect Destination Device'(005)
COLOR COL_NEGATIVE.
EXIT.
ENDCASE.
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
line_width_src = 134
line_width_dst = 255
TABLES
content_in = pdf
content_out = objbin
EXCEPTIONS
err_line_width_src_too_long = 1
err_line_width_dst_too_long = 2
err_conv_failed = 3
OTHERS = 4.
ENDFORM. " pdf_convert -
SAPScript Form Layout Error after HRSP Upgrade
Hi SAP Experts,
I hope someone can shed some of your inputs in the error that we have in our SAPScript form.
A window in our SAPScript form does not display at all when a report is generated.
Funny thing is that we did not make any change to the said form and this error is consistent across all our SAP environments - Dev, QA and Prod.
This has started happening after we had the SAP HRSP upgrade last weekend.
We tried checking the form configuration and we cannot find anything wrong in it.
We tried to check for SAPScript versions but we found out that this is not available in SE71, unlike for programs in SE38.
Has anyone of you encountered this problem?
Hope I can get some expert inputs from the community on this issue.
Thanks!Managed to find out the root cause of the SAPScript error. There was a new line that was added in the form layout after the HRSP upgrade. As to how it was added, it was unknown. But was able to resolve and fix the issue already.
-
How to upload / download sapscript forms
Hi,
Is it possible to upload / download sapscript forms to pc?
Thanks in advanceHello,
Across clients we can copy scripts by Tx. SCC1. Please keep in mind that you have to give the task ID and NOT the Transport Request ID if the Script/Std. Txt has to be ported across the clients.
Regards, Murugesh AS -
Sending sapscript form through Email
Hi,
I modifyed a std sapscript form for customer statement and that output i want to send to the customer through Email.So now i need a help for further what are the steps need to be do for sending that form by email.Pls be in details so that for me easy to solve this.
Thanks,
Rajendra.Hi ,
I am using the below code to send the form output by mail but it is not working for me.pls correct my code where i want to change so that i can solve my issues.
DATA: itcpo LIKE itcpo,
tab_lines LIKE sy-tabix.
Variables for EMAIL functionality
DATA: maildata LIKE sodocchgi1.
DATA: mailpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: mailhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: mailbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailrec LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: solisti1 LIKE solisti1 OCCURS 0 WITH HEADER LINE.
parameter: p_email1 like somlreci1-receiver .
PERFORM send_form_via_email.
FORM SEND_FORM_VIA_EMAIL *
FORM send_form_via_email.
CLEAR: maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
mailtxt-line = 'Here is your file'.
APPEND mailtxt.
Prepare Packing List
PERFORM prepare_packing_list.
Set recipient - email address here!!!
mailrec-receiver = p_email1.
mailrec-rec_type = 'U'.
APPEND mailrec.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = maildata
put_in_outbox = ' '
TABLES
packing_list = mailpack
object_header = mailhead
contents_bin = mailbin
contents_txt = mailtxt
receivers = mailrec
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
ENDFORM.
Form PREPARE_PACKING_LIST
FORM prepare_packing_list.
CLEAR: mailpack, mailbin, mailhead.
REFRESH: mailpack, mailbin, mailhead.
DESCRIBE TABLE mailtxt LINES tab_lines.
READ TABLE mailtxt INDEX tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
CLEAR mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
APPEND mailpack.
Creation of the document attachment
This form gets the OTF code from the SAPscript form.
If you already have your OTF code, I believe that you may
be able to skip this form. just do the following code, looping thru
your SOLISTI1 and updating MAILBIN.
PERFORM get_otf_code.
LOOP AT solisti1.
MOVE-CORRESPONDING solisti1 TO mailbin.
APPEND mailbin.
ENDLOOP.
DESCRIBE TABLE mailbin LINES tab_lines.
mailhead = 'TEST.OTF'.
APPEND mailhead.
Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-obj_name = 'TEST'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
ENDFORM.
Form GET_OTF_CODE
FORM get_otf_code.
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'Z2006FICSE'
language = sy-langu
options = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'START_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
window = 'MAIN'
EXCEPTIONS
error_message = 01
OTHERS = 02.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
MOVE-CORRESPONDING itcpo TO itcpp.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
result = itcpp
TABLES
otfdata = otf
EXCEPTIONS
OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR solisti1. REFRESH solisti1.
LOOP AT otf.
solisti1-line = otf.
APPEND solisti1.
ENDLOOP.
ENDFORM.
Hope i can expect the feedback soon from you guys.
Thanks,
Rajendra. -
HI Gurus!
How to find the Request no of Sapscript form ? i tried in E070 & E071 , but i didnt got .
Regards
Rahul
Edited by: rahul deshmukh on Feb 8, 2008 11:39 AMHi,
use tcode SE10.....
in that enter the user name....in which u created the script....
and check both the check boxs in 'Request Status' Block.... then display....
u all find lots of transport no,,,,,,check the description given by u for the script .
Thanks
Sarada -
SAPSCRIPT form - Text is not porperly displayed
hi all,
in my SAPSCRIPT form, I am getting a text from PERFORM stmt. in the PERFORM , the text is coming correct, but in the form , it is showing only half of the text.
the code
FORM get_text TABLES ts_intab STRUCTURE itcsy
ts_outtab STRUCTURE itcsy.
DATA: l_haul_text(500) TYPE c,
l_haul_long(250) TYPE c.
l_haul_long = l_haul_text+0(250).
LOOP AT ts_outtab.
CASE ts_outtab-name.
WHEN 'L_HAUL_LONG'.
ts_outtab-value = l_haul_long.
MODIFY ts_outtab.
ENDCASE.
ENDLOOP.
Then in the form, just display
/: PERFORM GET_TEXT IN PROGRAM
/: USING &VBDKL-VBELN&
/: CHANGING &L_HAUL_LONG&
/: ENDPERFORM
&L_HAUL_LONG&
while debugging, the text is correct till TS_OUTTAB but when it comes to the form L_HAUL_LONG, it is truncated.......what should i do..
Kindly help.
THnaksanswered
Maybe you are looking for
-
Urgent: regarding stock aging report
hi, i want to have t-code for 'STOCK AGING REPORT' which shows that this material is present in the plant from this <b>date</b>. <b>plzzz provide me the tcode for it.</b> if anybody provide me solution to it will be definately rewarded. Message was e
-
To Find the path of the filename
Hi Guys! Is it possible in D2K 2.1 to find the path of the filename entered by the user???? My problem is: I use DDE package funct DDE.APP_BEGIN to open a filename (e.g. in this case any HTML file) enterd by the user. But I do not know where the IEXP
-
Reports server in iAS 10g ignores some xml settings when running report
Hi, has anyone else noticed that when you run a report on the reports server from iAs10g it seems to ignore certain settings you specified? I am talking about: - tag names when they are (case insensitively) equal to the result column name from the qu
-
HT5312 How do I set up a rescue email? Need help
How do i set up a rescue email
-
Default access modifier in Interface
public interface Inter protected void print(); }Doesn't compile. Error Message is Modifier protected not allowed here. public interface Inter void print(); above code compiles fine. I was thinking since default access is more resctricted than pr