Transport Screen objects-GUI status(SAP does not create request, why)?

Hi experts,
I use SE80 to change GUI status, but system does not create a transport request for me to transfer? why?

Hi,
Thanks for replay. Actually, the SE80->program->Gui status have some objects and they are already transfered. But I can't see them on target system. But When I create exactly the same name, the system tell me they are already created. I think it becuase the original language is 'DE' but I use default language 'EN' to modify and create the request?

Similar Messages

Transport GUI Screen (SE51), GUI-status (SE41) and Titlebar - how?

Hi,
Please help me with the following:
How do you transport the following objects:
GUI Screen (SE51)
GUI-status (SE41)
Titlebar for the GUI
Thanks,
John

You can not create a screen or gui status or gui title without having a program, so there is always a reference to the program. If you go to SE80, and enter your program name, and hit enter, you will see folders for the screens, gui statuses, and gui titles.
The code in your PBO is simply saying that you want to use those for that particular screen, they must already exist in your program.
In reality, you should always create all of the objects of your program in SE80, and forget about SE51 and SE41, in doing so you will see how all of the objects of your program are together when using SE80.
And yes, to confirm, the screen and gui status/titles will be transported with your program.
Regards,
Rich Heilman

Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI

Hello All,
We are unable to make PGI for Sales Order 2066904/10 because of wrong Serial Number Status.
Delivery note was created on the 22.12.2012 and then due to errors deleted on 27.12.2012.
Problem is that now we need to do PGI but Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI with Serial Number Status ESTO.
These 8 products are in Stock and available for this Sales Order, one of the Serial Numbers is with OK Status
8115001012
8115001057
8115001058
8115001079
8115001081 with OK status
8115001180
8115001181
8115001690
Please let us know how to correct the problem so we could do PGI for this Order?
This scenario is not replicable in RST(Quality System)
Our Findings:
** 1. We have tried IQ02>Edit>Special Serial No Functions>Manual Transactions>To Stock, But it still do not remove EDEL.
2. Is it suggestible to use T Code BS22 and thereby change PMS8 to Warning? I am not sure regarding this since this a SAP managed Table
Your help is highly obliged......This is very urgent..........
Regards,
Anirban
SD Consultant

Hi,
I have encountered same issue today and here is the solution:
1. Manually changed the status from EDEL/ESTO to ECUS
Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Customer", then save.
2. Once status is in ECUS, change the serial number status back to ESTO.
Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Stock", then save.
After doing the 2 steps above, you should be able to do PGI using the serial number.
Kindly advise if it works for you.
Regards,
Vhanie

Application object BUPA: Table TSADC does not exist

Hi All,
When I try to create a Business Partner in transaction fmcac1, I get the message Application object BUPA: Table TSADC does not exist, especially when I try to go back to the Address tab after clicking on any other tab on that screen. I have tried to add the table in trans BUSG but I don't know what I am supposed to assign as the FM, for example.
I have also used the trans BUSB to try to delete the entry for TSADC but it says 'do not make any changes (SAP Entry.)' Can u pliz assist with the information I have requsted above or prescribe another solution.
Thanx in advance.

For the benefit of others, I was able to solve the problem by removing the entry to the RIGHT, not the WHOLE entry (which refuses becoz it's an SAP entry). This is through transaction BUSB.

ORA-04043: object SYS.DELTA$SESSION does not exist

Dear Friends
after I import my data by using the follwoing import script :
IMP JCC/P_MANUF FILE =JCC.DMP FULL
and at the end give this message import has been imported succesfully without warning
then when I use this script :
SQL> SELECT TNAME FROM TAB
2 WHERE TNAME LIKE 'USER_SESSION'
3 /
TNAME
USER_SESSION
The table USER_SESSION is exist but when I try to desplay the structure of the USER_SESSION by using this :
SQL> DESC USER_SESSION
ERROR:
ORA-04043: object SYS.DELTA$SESSION does not exist
and when I try to use the select statment as the following
SELECT * FROM USER_SESSION
ERROR at line 1:
ORA-00980: synonym translation is no longer valid
Waiting for your valuable answer.
Best regards
Jamil Alshaibani

SQL> select * from V$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL> !uname -a
Linux KAD-VMWARE 2.6.9-55.ELsmp #1 SMP Fri Apr 20 16:36:54 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
SQL> sho user
USER is "SYS"
SQL> select object_type,status from dba_objects where object_name = 'K_DRWDWN_GRP' and OWNER = 'SYS';
no rows selected
Is any thing wrong with my dictionary? please let me know if i missed anything?
Edited by: sanora600 on Oct 16, 2010 12:34 AM

In which tables sap does not add partitions to partitioned tablespaces

Hi Team,
I would like to know in which tables sap does not add partitions to partitioned tablespaces in a BW 7.00 system on aix db2. any idea?
DB2 version is 8.1.5
Thanks,
Asad
Message was edited by: Asad S Zafer

The documentation you quote says
Local and global indexes associated with the range-partitioned table remain usable.When you added a partition, the indexes remained usable, just as it said they would:
when checked for the status of the indexes, I can still see them as USABLE.so I'm not sure what the issue is.
btw I'm not sure what you mean by
creating a table and adding local and global partition using the ALTER CommandDid you mean the ALTER TABLE command? What are "local and global partitions" and how did you add them?

SAP Does not start after backup complition

Dear All,
Since last two times when we put Offline whole database + Redolog
backup, after complition of backup SAP Does not start.
I have tried to start SAP Manually, but didn't start.
To start SAP we have to restart the SERVER.
Attached please find backup log.
Thanks and Regards,
Nirav

Thanks you all for quick response.
Backup log is pasted at end of message. Wile you please guide me where dev_disp log is located.
I am taking backup through DB13.
When I got this problem. Database was not started. But at O/S level SMON is running. Shutdown normal or transactional was not working. I have to shutdown abort. and start the database.
SAP services are also running at O/S level.
I have doubt about work process.
Thanks
Nirav
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: beamxrbx.aft 2009-05-06 04.00.05
BR0484I BRBACKUP log file: /oracle/PRD/sapbackup/beamxrbx.aft
BR0477I Oracle pfile /oracle/PRD/102_64/dbs/initPRD.ora created from spfile /oracle/PRD/102_64/dbs/spfilePRD.ora
BR0083W Compression rates out of date - run BRBACKUP with option '-k only'
BR0101I Parameters
Name                           Value
oracle_sid                     PRD
oracle_home                    /oracle/PRD/102_64
oracle_profile                 /oracle/PRD/102_64/dbs/initPRD.ora
sapdata_home                   /oracle/PRD
sap_profile                    /oracle/PRD/102_64/dbs/initPRD.sap
backup_mode                    ALL
backup_type                    offline_force
backup_dev_type                tape
compress                       hardware
tape_copy_cmd                  dd
cpio_flags                     -ovB
cpio_in_flags                  -iuvB
dd_flags                       obs=64k bs=64k
dd_in_flags                    ibs=64k bs=64k
rewind                         mt -f $ rew
rewind_offline                 mt -f $ offl
tape_size                      102400.000 MB
tape_address                   /dev/rmt/0mn
tape_address_rew               /dev/rmt/0m
volume_backup                  PRDB01,PRDB02,PRDB03,PRDB04,PRDB05,PRDB06,PRDB07,PRDB08,PRDB09,PRDB10,
                               PRDB11,PRDB12,PRDB13,PRDB14,PRDB15,PRDB16,PRDB17,PRDB18,PRDB19,PRDB20,
                               PRDB21,PRDB22,PRDB23,PRDB24,PRDB25,PRDB26,PRDB27,PRDB28,PRDB29,PRDB30
expir_period                   29
tape_use_count                 100
exec_parallel                  0
system_info                    prdadm/oraprd rlsdbi HP-UX B.11.31 U ia64
oracle_info                    PRD 10.2.0.2.0 8192 7547 46814166 rlsdbi UTF8 UTF8
sap_info                       700 SAPSR3 0002LK0003PRD0011Q21439814270013NetWeaver_ORA
make_info                      hpia64 OCI_102 Apr 21 2007
command_line                   brbackup -u / -jid ALGOF20090506040000 -c force -t offline_force -m all -p initPRD.sap -a -c force -p initPRD.sap -sd
BR0116I ARCHIVE LOG LIST before backup for database instance PRD
Parameter                      Value
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            /oracle/PRD/oraarch/PRDarch
Archive format                 %t_%s_%r.dbf
Oldest online log sequence     7544
Next log sequence to archive   7547
Current log sequence           7547             SCN: 46814166
Database block size            8192             Thread: 1
Current system change number   46815598         ResetId: 674927195
BR0118I Tablespaces and data files
Tablespace     TS-Status F-Status File                                                       Size   Id.     Device Link    Type       MaxSize     IncrSize BlkSize
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata1/sr3_1/sr3.data1                 2097160192    4 1073872902 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata1/sr3_2/sr3.data2                 2097160192    5 1073872902 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata1/sr3_3/sr3.data3                 2097160192    6 1073872902 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata1/sr3_4/sr3.data4                 2097160192    7 1073872902 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata1/sr3_5/sr3.data5                 2097160192    8 1073872902 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata2/sr3_10/sr3.data10               2097160192   13 1073872903 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata2/sr3_6/sr3.data6                 2097160192    9 1073872903 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata2/sr3_7/sr3.data7                 2097160192   10 1073872903 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata2/sr3_8/sr3.data8                 2097160192   11 1073872903 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata2/sr3_9/sr3.data9                 2097160192   12 1073872903 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata3/sr3_11/sr3.data11               2097160192   14 1073872904 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata3/sr3_12/sr3.data12               2097160192   15 1073872904 NOLINK FILE   10485760000     20971520     8192
PSAPSR3        ONLINE*    ONLINE+   /oracle/PRD/sapdata3/sr3_13/sr3.data13               2097160192
BR0143I Backup type: offline_force
BR0113I Files will be compressed by hardware
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: PRDB25
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name PRDB25 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.07
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/PRD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0241I Checking label on volume in device /dev/rmt/0mn
BR0242I Scratch volume in device /dev/rmt/0mn will be renamed to PRDB25
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.08
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0202I Saving /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
#SAVED.... sr3700.data7 PRDB25/43
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.17
BR0063I 40 of 62 files processed - 82240.312 MB of 120066.277 MB done
BR0204I Percentage done: 68.50%, estimated end time: 4:29
BR0001I **********************************________________
BR0202I Saving /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
#SAVED.... sr3700.data8 PRDB25/44
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.42
BR0063I 41 of 62 files processed - 84640.320 MB of 120066.277 MB done
BR0204I Percentage done: 70.49%, estimated end time: 4:29
BR0001I ***********************************_______________
BR0202I Saving /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
#SAVED.... sr3700.data10 PRDB25/45
#FILE..... /oracle/PRD/sapdata1/system_1/system01.dat
#SAVED.... system01.dat PRDB25/60
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.07
BR0063I 57 of 62 files processed - 119850.445 MB of 120066.277 MB done
BR0204I Percentage done: 99.82%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g11m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g11m1.dbf
#SAVED.... log_g11m1.dbf PRDB25/61
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.14
BR0063I 58 of 62 files processed - 119900.446 MB of 120066.277 MB done
BR0204I Percentage done: 99.86%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g12m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g12m1.dbf
#SAVED.... log_g12m1.dbf PRDB25/62
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.22
BR0063I 59 of 62 files processed - 119950.447 MB of 120066.277 MB done
BR0204I Percentage done: 99.90%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g13m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g13m1.dbf
#SAVED.... log_g13m1.dbf PRDB25/63
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.29
BR0063I 60 of 62 files processed - 120000.448 MB of 120066.277 MB done
BR0204I Percentage done: 99.95%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g14m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g14m1.dbf
#SAVED.... log_g14m1.dbf PRDB25/64
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.36
BR0063I 61 of 62 files processed - 120050.449 MB of 120066.277 MB done
BR0204I Percentage done: 99.99%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
#SAVED.... cntlrPRD.dbf PRDB25/65
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.42
BR0063I 62 of 62 files processed - 120066.277 MB of 120066.277 MB done
BR0204I Percentage done: 100.00%, estimated end time: 4:27
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.44
BR0304I Starting and opening database instance PRD ...
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.10
BR0305I Start and open of database instance PRD successful
BR0117I ARCHIVE LOG LIST after backup for database instance PRD
Parameter                      Value
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            /oracle/PRD/oraarch/PRDarch
Archive format                 %t_%s_%r.dbf
Oldest online log sequence     7544
Next log sequence to archive   7547
Current log sequence           7547             SCN: 46814166
Database block size            8192             Thread: 1
Current system change number   46815880         ResetId: 674927195
BR0056I End of database backup: beamxrbx.aft 2009-05-06 04.28.11
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0291I BRARCHIVE (action ID aeamxrbx) will be started with options '+beamxrbx.aft,42106018475,PRDB25,62 -jid ALGOF20090506040000 -d tape -c force -p initPRD.sap -sd'
BR0280I BRBACKUP time stamp: 2009-05-06 04.31.42
BR0292I Execution of BRARCHIVE (action ID aeamxrbx) finished with return code 0

What is the exact meaning for Screen Texts, GUI Status & GUI Titles

What is the exact meaning for Screen Texts, GUI Status & GUI Titles and where we can find in SAP.
What is called as these : Screen Texts, GUI Status & GUI Titles
Kindly let me know.
Akshtiha.

Hi Akshitha,
Screen text:They are labels that you can display beside your selection-screen parameters/select-options.. from the ABAP editor, use the menu option Go to> Text Elements>Selection Texts.
GUI STATUS:go through this link
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dba99935c111d1829f0000e829fbfe/content.htm
gui title:The GUI status and GUI title are interface elements of screens. You create both of them using the Menu Painter in the ABAP Workbench. On screens, GUI statuses of type dialog status are used.
Thanks
Vikranth Khimavath

The green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct? Mine does not. Sometimes it makes the pop-up screen SMALLER. Appreciate someone solving this for me.

the green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct? Mine does not. Sometimes it makes the pop-up screen SMALLER. Appreciate someone solving this for me.

Are you talking about the green '+' button in the top left corner? That technically doesn't enlarge it. It switches the window from the default window size to the custom size you made. You can enlarge the window by moving your mouse to the bottom right corner of the window, and dragging until you get the size you want.
MacBook

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.

Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem!

PO creation-ME21n-Why SAP does not check company code and Plant relation

Hi All,
Does someone know, why SAP does not check Plant and company code relation at the time of PO creation or how can we put validation between plant and company code at the time of PO creation.
Example: Suppose i have a company 0001 which is assinged to Plant 0001. when i am creating a PO with another company code 0002(Entering at header level-Org, data) and using Plant 0001 at line item level. SAP does not do this validation.
How can we put this check in place?
Thanks in advance.
Deepak

Hello Deepak,
There are three types of purchasing
- Company code specific :You need to assign company code to Pur organization
- Plant specific : You must assign plant to pur organization
- Cross company purchasing: No assignment between company code and pur organization.
In the case 3, the system will not check company code and plant relationship, but it will check plant and pur organization specific.
The following is the copy of sap help text:
You can assign a purchasing organization to one company code. This is company-specific purchasing.
You can assign a purchasing organization to no company code. This purchasing organization can then procure for all plants assigned to it, irrespective of the company code to which the plant belongs.
Since each plant must be assigned to a company code, the company code can be determined via the plant in each procurement transaction, even if the procuring purchasing organization is not assigned to a company code.
A purchasing organization must be assigned to one or more plants. This is plant-specific purchasing.
Now, check your company-code and purchase organization assignment.
Hope this helps.
Regards
Arif Mansuri

Screen briefly flashes white but does not display the page when the Safari icon or other icons are tapped.

A problem has just started with my IPAD Air after 3 months of use.
If I try to open Safari by tapping on the icon the screen briefly flashes white but does not display the page.
Similarly if I try to open Settings page, Mail page, Calendar or Clock the screen just briefly flashes but the Apps do not run.
Some of the Apps do work on tapping the icon e.g. Maps, iBooks, Appstore, iTunes, Newstand etc.
I do have some website links which display when the icon is tapped e.g. John Lewis but some links do not work.
I have ensured that the ipad is fully charged, powered it off an on again, and cleaned the screen with a lint free cloth but the
same problem keeps occurring.

I saume you used a second display at one time, otherwise the Display settings wouldn't be treating your primary display as a secondary.
IF you open your System Preferences>Displays (-System Preferences) and click "Gather Windows" it should pull everything to the display on which you clicked it.

Object Category CL_ABAP Class does not exist

Hi Experts,
When Iam creating a workflow tasks or template the object category CL_ABAP Class does not exist in drop down box. Only BOR Business object is appearing. Could anyone help me the problem and how to resolve it.

Jose,
Note: If you are in a 6.20 system and can't see the Object Category choice "ABAP Class", then you first need to execute report SWF_CATID to enable "ABAP Classes" as an available object category. It's already done for you in releases 6.40 and higher.
I am guessing you are in SAP_BASIS 620 version.
Courtesy:
This is from blog written by jocelyn dart of ABAP OO Workflow.
For more details pls check this:
/people/jocelyn.dart/blog/2006/12/19/using-functional-methods-in-workflows-and-tasks
Hope this will help.
Cheers
Jai
PS: Small correction report name is RSWF_CATID not SWF_CATID

For object RF_BELEG number range does not exist

Hi,
while doing PGI, i get an error For Object RF_BELEG ,number range does not exist in company code ABCD. Where do i create the number range for this. I tried with FBN1 but not useful.
" Diagnosis says, the database table NRIV has the delivery class as C. Make chages in customizing. "
what could be the reason for this error? can anyone help me to fix this error.
i tried to fix it through transaction code 'SNRO' and 'OBA7' but in vain
can anyone help me out

Try Extending the same in VN01 , and assigning it to your relevant document
Cheers

Apple tv gen. 2 status light does not come

Apple tv generation 2 status light does not come on. Remote works. Did a restore through iTunes.... Still nothing. Please help.

No it won't turn on at all you can't see it on the tv.... It is like it is dead. I am thinking it is something with the power source, but don't know how to fix it.

Transport Screen objects-GUI status(SAP does not create request, why)?

Similar Messages

Maybe you are looking for