Transport shows successfull but why it is not taking effect in test

Hi all ,
I have changed my dataource and added some Z fields .
But when i transport that to test system, i can not see the effect in test .
Transport shows successfull but why it is not takin effect from the Dev Datasource changes to Test systems ?
Please give me solution

Hi,
You can check the version of the data source.
Check this version if shows the latest date and the TR number on which you have transported the data source.If it contains different one then select your one and activate it.
You can actually activate the desired version.
Just go RSO2->Extract structure->utiliteis-> version -> version management.
Thanks

Similar Messages

BADI Changes are not taking effect

Hi,
I have done few changes at BADI...but those changes are not taking effect...
I activated everything...wat might b the problem?
Regards,
venkat
Moderator message: too vague, help not possible, please describe problems in all technical detail if posting again.
Edited by: Thomas Zloch on Feb 23, 2011 3:02 PM

Yes, Actually after looking into the problem some more it looks like the
changes are taking effect. The only problem that we are having is that
the start bar does not appear when the user log in and no drives are
showing up under windows explorer. I checked the policy and we did not
configure the section under windows explorer so i am not sure why the
drives are not showing. Also I am not sure why the start bar does not
appear.
Dan

Customizing CO class on site level is not taking effect

Hello,
I extended a CO class and changed the region "Controller Class" on Site level from "Inherit" to my newly created class
But the personalization is not taking effect when i run the page; any idea why?
thanks

Ash,
begin
jdr_utils.listcustomizations('your page path like /oracle/apps/pon/award/completion/webui/ponCompleteAward2PG');
end;
will give the personalization availble for your page, then get the details using,
begin
jdr_utils.printDocument('output of the above query');
end;
Make sure the above script is giving your controller in place and see what level your contoller is attached.
Thanks.
With Regards,
Kali.
OSSi.

HT1430 When the phone call from my iphone 5 will be in touch with another man, when my phone waiting to show view but why not?

When the phone call from my iphone 5 will be in touch with another man, when my phone waiting to show viewing but why not?

I'm sorry but your post doesn't make much sense in English. You may want to try posting again in your native language.
Best of luck.

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks
And please help me can type Laos font in it like andrio phone.

Hi Cozumel,
Thanks for posting. I'm sorry you're having problems with your bills. I can take a look at this for you. Drop me an email with your account details and a link to this thread for reference. You'll find the address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Hello, My white McBook (2008 or 2009) recently stopped turning on. When I hook up the Magsafe power adapter, the light shows green, but the computer will not turn on, or make a sound. I've tried the re-boot option, but nothing works. Please advise!

Hello,
My white McBook (2008 or 2009) recently stopped turning on. When I hook up the Magsafe power adapter, the light shows green, but the computer will not turn on, or make a sound. I've tried the re-boot option, but nothing works. I first thought I needed a new battery because the lights at the back are all off, but shouldn't the computer turn on once the power adapter is hooked up and the light on the Magsafe adapter shows green? I'm a computer doofus, so please be kind. Please advise! Thanks in advance.
SS

Take it in for service.

The left side of my home button is screen is kinda feel like hollow when I tap it and it makes a sound too. It is bulge,a little. I thought every ipad is hard to touch but why mine is not? Help please,what should I do?

The left side of my home button is screen is kinda feel like hollow when I tap it and it makes a sound too. It is bulge,a little. I thought every ipad is hard to touch but why mine is not? Help please,what should I do? Please I need your help.

The damage has been done then
Take it to Apple and pay for a replacement
Here in the States a replacement cost $229
Allan

HT3209 I know my computer cannot play HD but why can I not purchase HD on my computer for my iPAD which can play HD?

I know my computer cannot play HD but why can I not purchase HD on my computer to play on my iPad which is capable.

Fast answers:
1. Try resetting NVRAM/PRAM and SMC. Doesn't usually 'cure' keyboard problems you report, but it costs nothing and only takes a few minutes.
https://discussions.apple.com/thread/3819550?start=0&tstart=0
2. Try plugging in a USB keyboard. Doesn't absolutely have to be a Mac keyboard. A PC keyboard will work for a test. If the typing problem does not occur with the USB keyboard, you have a temporary solution until you can arrange to visit a repair facility.
3. If your MacBook is older and has a user-removable battery, shut down the computer, remove the battery, and examine it for signs of 'bulging' or swelling. Then connect the computer to the Magsafe power supply, without reinstalling the battery, and turn it back on. If the keyboard problem has gone away, it was likely caused by a swelling battery.

The charger is showing green but the laptop will not turn on. The stand-by light is flashing and the laptop is making a bleeping sound. Any suggestions?

the charger is showing green but the laptop will not turn on. The stand-by light is flashing and the laptop is making a bleeping sound. Any suggestions?

Could be bad ram or logic board. Take it to an Apple store or AASP.

Why is CC not taking my password? I changed it and it is still not accepting it.

Why is CC not taking my password? I changed it, and it is still not accepting it.

double check your adobe.com password, http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

Classic Report - Column Conditions Not taking Effect when Changing Pagination

Apex Version: 4.2.1.00.08
DB Version: 11g Release 11.2.0.3.0
Hi,
I have a classic report that has some columns that conditional hide/show depending upon the value of a page item. When the report is first displayed with the first pagination set(Rows 1-100), the columns display as they should.
When moving to the next pagination set(Rows 101-200), the columns no longer display as they should and it seems that the condition is not taking effect. Partial Page Refresh is set to 'Yes' for the report.
Any ideas on why this might be occurring?

tvanderl
Assuming you mean that columns are rendered while you expect them not to.
Are the conditions based on page items.
It could be that the session state of those items is different between when the page is first rendered and when de refresh due to the pagination is done.
See if adding the in the condition used page items to the page items to be submitted for the region helps.
Others wise see if you can replicate the issue on apex.oracle.com so we can see what you mean.
Nicolette

Changes to php.ini not taking effect

I'm running Leopard 10.5.8 with the Apple-supplied versions of PHP (5.2.10) and Apache (2.2.11). Changes made to the /etc/php.ini file are not taking effect after stop/start of Apache. phpinfo() and shell command php -i confirm the 'status quo'. The php.ini file permissions are 444 with root/wheel ownership. It was copied from the php.ini.default file that came with the php distribution. Here's what I'm trying to change - seems pretty like this should be pretty basic stuff:
include_path = ".:/usr/local/some_directory"
// Original entry in the php.ini.default file was commented out
// The directory '/usr/local/some_directory' exists
// phpinfo() only shows include_path = .:
magicquotesgpc = Off
// Original entry in the php.ini.default value was 'On'
// phpinfo() shows magicquotesgpc = Off
I've been all over the php.net website and cannot identify my error. Shouldn't the changes to the php.ini file should be interpreted immediately after restarting Apache?
Has anyone experienced a similar problem? Suggestions for fixing this malfunction would be greatly appreciated. I know I can hard code workarounds into my PHP code but that really defeats the whole purpose of even having a php.ini file....

Was able to successfully implement these changes on a different Mac OSX 10.5.8 system. Different architecture (1st system is MBP, 2nd system is MB) although each system has all software updates installed and is up-to-date. Copied php.ini file from MB to MBP and problematic settings were corrected. Ran /developer/applications/utilities/filemerge.app to check for differences between the two php.ini files. Found one (line 305):
Failing entry: error_reporting = E_ALL
Working entry: error_reporting = E_ALL & ~E_NOTICE
I took out E_NOTICE to help with debugging as per instructions from php.net/manual/en/errorfunc.configuration.php
Go figure....

BO Custom class not taking effect

Hi Experts,
Created a customer module for BO part,
Extended WrapperCrmWecRegisterBase and WrapperCrmWecRegisterConsumer with
CustomWrapperCrmWecRegisterBaseImpl, CustomWrapperCrmWecRegisterConsumerImpl respectively.
Created factory-config.xml in BO part and added the information:
<factory xmlns:xi="http://www.w3.org/2001/XInclude" xmlns:wec="com.sap.wec.core.config">
<factoryClass
name="com.sap.wec.app.common.module.user.backend.impl.crm.rfc.WrapperCrmWecRegisterBase"
singleton="false"
className="com.customer.wec.app.common.module.user.backend.impl.crm.rfc.CustomWrapperCrmWecRegisterBaseImpl" />
<factoryClass
name="com.sap.wec.app.common.module.user.backend.impl.crm.rfc.WrapperCrmWecRegisterConsumer"
singleton="false"
className="com.customer.wec.app.common.module.user.backend.impl.crm.rfc.CustomWrapperCrmWecRegisterConsumerImpl" />
</factory>
I have added factory-config.xml in MD's metadata.xml
<config-file namespace="customer" part="bo" type="factory-config">factory-config.xml</config-file>
I have changed below code in the implementation to send langauge[iuser_language] to backend. But the hardcoded value is not shown in the backend debug mode of RFC: CRM_WEC_REGISTER_CONSUMER.
JCoStructure userLanguage = importParams.getStructure("IUSER_LANGUAGE");
        userLanguage.setValue("LANGU","FR");
Either ls_centraldata-partnerlanguage is still showing "E" and not showing "FR" or "F".
I also have added the public-parts for customer and sap folders.
Do I need to modify businessobject-config.xml or backendobject-config.xml files or any other?

Thank you Elena, I have modified as you suggested.
CustomUserCRMImpl declared in factory-config.xml
Imported CustomWrapperCrmWecRegisterConsumerImpl and modified accordingly.
<factory xmlns:xi="http://www.w3.org/2001/XInclude" xmlns:wec="com.sap.wec.core.config">
<factoryClass
name="com.sap.wec.app.common.module.user.backend.impl.crm.UserCRM"
singleton="false"
className="com.customer.wec.app.common.module.user.backend.impl.crm.CustomUserCRMImpl" />
</factory>
CustomUserCRMImpl.java looks like:
if (partner.isNotOnDB()) {
                functionReturnValue = CustomWrapperCrmWecRegisterConsumerImpl.execute(jcoCon, user,
                        user.getUserConfigurationBO(), password, appl_url, getLoginType(),
                        props.getProperty(EMAILTEMPLATE), props.getProperty(NOOFDAYS),
But still its not taking effect.
Do I need to declare the CustomUserCRMImpl in backendobject-config.xml too?

Not in not taking effect - extracting from xmltype

select distinct type,TO_CHAR(t1.add_dt,'DD-MON-YY') add_date ,
TO_CHAR(l2.e_dt,'DD-MON-YY') e_date,name, d.d_nm
from table1 t1 , table3 d,table2 t2 ,
select distinct
f.xmlcol.extract('//fDef/ns1:vD/ns1:vDesc/ns1:dName/text()','xmlns:ns1="http://abc.def.org/"').getStringVal() info
from ftable f
) f_d,
select distinct
b.xmlcol.extract('//benchmarkRuleDef/ns1:dName/text()','xmlns:ns1="http://abc.def.org/"').getStringVal() info
from btable b
) b_d
where
t2.id = t1.id
and to_char(t1.id) =(d.xmlcol.extract('//c/R/val/text()').getStringVal())
and d.d_nm NOT In (f_d.info)
and d.d_nm NOT In (b_d.info)
However, the last 2 lines are not taking effect. Example, I get 30 as info from query f_d. But in the end I have the condition and d.d_nm NOT In (f_d.info)
- it still shows the record. Not In is not taking effect. Not sure what am i doing wrong here. Any help appreciated.

Yes.
If the query in that form doesn't return any rows then start disassembling the SQL to see where rows are being dropped/filtered at. Is q1 and q2 returning what you think? How's that compare to d.d_nm? Is the outer select/from finding the rows you want found? Is your d.xmlcol.extract('//c/R/val/text()').getStringVal()) returning what you think it should (put it as a column in the SELECT statement)?
Without knowing more about your tables and data, that's the best I can offer. Start simplifying your SQL to see where if filters out the data you expect to see.

Changes is special conversion routine not taking effect

I changed a special conversion routine specified in a conversion rule(BD79) with a rule type copy sender field.
I made the required changes to the function module CONVERSION_EXIT_&_OUTPUT and activated it but still the outbound Idoc suggests that the changes are not taking effect.
Can someone suggest what may be the reason for this?

The issue got resolved

Transport shows successfull but why it is not taking effect in test

Similar Messages

Maybe you are looking for