Transport: Sort and Compress?

Is it a good idea to do this with a very large amount of objects in a transport?
What does it do exactly? Is there any risks?
Seemed like when I did it before one of the things it did was it would take a table doc object and compress it with the actuial table object itself
Thanks any feedback is appreciated.

There is no limitation and you can transport number of objects with in single transport request.
no need to do sort and compress.
Thanks
Seshu

Similar Messages

Sort and compress transport!

Hi SDN,
What is sort and compress of a transport!!

Hi Radhakishan,
Welcome to SDN!!
There are many a times when you would include objects from a earlier transport request into your new transport request. Now you may also add the same object individually. This would make two entries for the same object in the same transport request. So you would use the "sort and compress" option to remove the redundancy and also have only the "latest" version.
Bye
Dinesh

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Reporting Services Error after Interactive sorting and drill down in pps

Hi
i have a report that has a drill down option that shows all workgroups within a specific parent group and an interactive sorting ass well on both columns parent group & workgroup
This is displayed in pps combined with a SharePoint
---the problem is that after sorting the parent group column by name i then press the drill through icon (+) next to it hopping to see all workgroups related to each parent group
- but instead
i receive this Reporting Services Error :
The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
Online Help
If I don't press the sorting and just drill through it works fine. the sorting itself also works fine.
any suggestions ?

Hi Hyaron,
I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
from the Grouping Pane in the Report Designer.
How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

What is difference between transport protocol and message protocol

what is difference between transport protocol and message protocol
please give definition and small explanation

Hi,
Transport protocol gives information about outside of message details, kind of system, security details.
A transport protocol is a network protocol that has the capability of transferring some payload from one node to another, thus providing some level of transparency from the underlying network.
Transport protocols are used as a mechanism to move payloads around a network. Typically, a payload will have a transport binding associated with it. For example, SOAP (acting as a payload) has a predetermined binding for HTTP (a transport protocol).
Some common transport protocols include: HTTP, HTTP-R, SMTP and BEEP.
Message protocol gives you an idea of message type XI payload
http://help.sap.com/saphelp_nw04/helpdata/en/b6/0b733cb7d61952e10000000a11405a/content.htm

HT201303 was just having this problem until today. It is now all sorted and I can explain what to do very simply and easily.

I was just having this problem until today. It is now all sorted and I can explain what to do very simply and easily.
I remembered the answers to my questions, I just forgot "EXACTLY" how I entered the text - so I had to have them reset. The easiest way is to sign in through www.appleid.com. Then on the right click the "Manage your Account" link and sign in. Easy so far right. Then, as others have said, look on the left of the screen you will see a link called "Password and Security" - click on this. Now this is where the confusion begins. Some people have a link located directly under the existing questions that looks like this "Forgot your answers? Send reset security info email to blah blah blah email . If you see this click it and it will send an email to the "Rescue Email" address that you entered when you originally entered your answers. Follow the instructions contained in this email and you are done. If you cannot remember this email address or you have since closed it, you will need to go to the Itunes Express lane and send an email to Apple requesting them to reset your answers.
HOWEVER IF YOU DO NOT SEE A THIS LINK UNDER THE QUESTIONS - this means that you DID NOT enter a Rescue email address when you originally set your questions. The only way you can now reset your Security Questions and Answers is to go to the Itunes Express lane and email Apple asking to have these reset. I have 2 apple accounts, one for myself and one for my daughter - as I did not include a rescue email I had to email apple. On both occasions, these questions were reset and an email sent to me exactly 24 hours after I sent them the request. I entered the new details, WROTE THEM DOWN EXACTLY AS I ENTERED THEM THIS TIME, entered a Rescue Email this time and I am good to go again. Simple. Now when I log in and click on "Password and Security" I do have the reset link visable. Apple support are good, they just take a bit of time to get things done, but they always seem to get there in the end. I just wish someone had taken the time to explain this somewhere else in the forum as it would have saved me much time and angst.
To get to the Itunes Express Lane go to this website www.appleid.com make sure the correct country is displayed top right, if not change it. Once this is saved go to the tabs at the top of the screen and click Support. Then halfway down the next page you will see a photo of two random people with a title of Contact Apple Support - Click this. Scroll down until you see the itunes logo, to the right of this you will see the link Express Lane for iTunes Player and iTunes Store - click on this. One the right hand side of the next page click on the link "itunes Store". On the next page click the link "Account Management" check the radio button beside "itunes store account security", select your country from the drop down box and click "Continue". Under the heading MORE OPTIONS, you will see a clickable link called email - click this. Fill in your name, Apple ID and country. Then in the text box, write "I have forgotten the answers to my Security questions, would you kindly please reset them. Thank-You". Then Click Continue, you will be given a reference number and an email is sent to your address advising that generally someone will attend to your request within 24 hours. Like I said previously, I had to do this twice and both times it was reset however it was done within about 5 minutes of the 24 hour cut off, so you will have to be patient. I know 100% that this works for Australia - I am guessing other countries should be similar. Hope this helps someone somewhere!

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Problem with sorting and filtering of table

Hello,
using VC 7.1 SP5 I have created [this|http://img232.imageshack.us/img232/2460/screenshotsr0.png] model. The webservice returns a collection of structured elements. The table is meant to display values of top-level attributes. This works as expected.
However, the table cannot be sorted or filtered. What is the reason for this? How can I fix that?
I tried to store the result of the web service in a data bridge. That did not succeed.
Best regards
Alexander

Hi Natty,
How are you trying to sort it?
I want to be able to sort the table by clicking on the table column headers. Furthermore, I want be able to filter the table by using the built-in table feature. However, table sorting and filtering seem to be disabled for this particular table, whereas other tables in my model provide the desired features.
Best regards
Alexander

Problem with 'sort and filter' feature of embed codes in Excel Online Web App

So my question has to do with the Excel Online feature where you can share a spreadsheet and embed it in a website with the option of allowing users to sort and filter the data. (The option is under the "Interaction" heading.)
One of the options if you look closely is "Let people sort and filter" which is not checked off. In the embed code you can see "AllowInteractivity=False". The problem is that when I check "Let people sort and filter"
the embed code changes completely - going from:
<iframe width="700" height="900" frameborder="0" scrolling="no" src="https://onedrive.live.com/embed?cid=dontworryaboutitEDFD383&resid=6BAA9620AEDFD383%21107&authkey=AFj3X8xq2U3IfDE&em=2&wdAllowInteractivity=False&Item='Sheet1'!A1%3AI32"></iframe>
to:
<iframe width="700" height="900" frameborder="0" scrolling="no" src="https://onedrive.live.com/embed?cid=dontworryaboutitEDFD383&resid=6BAA9620AEDFD383%21107&authkey=AFj3X8xq2U3IfDE&em=2&Item='Sheet1'!A1%3AI32"></iframe>
If I manually change 'false' to 'true' that doesn't do the trick so I'm not sure what to try next.
Any thoughts?

Hi,
We support Office for Windows in the current forum, since this question is about Office Online, I suggest you post the question in Office Online forum:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Using member sorting and grouping with two reports sharing rows

Hi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT               MATERIAL          AMOUNT
TOTAL PROD_A-X                                   100
PROD_A_A             MAT1                          22
PROD_A_B             MAT1                          50
PROD_A_A             MAT2                          28
TOTAL PROD_B-X                                   120
PROD_B_A             MAT1                          30
PROD_B_A             MAT2                          50
PROD_B_B             MAT2                          40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very much

Hi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT               MATERIAL          AMOUNT
TOTAL PROD_A-X                                   100
PROD_A_A             MAT1                          22
PROD_A_B             MAT1                          50
PROD_A_A             MAT2                          28
TOTAL PROD_B-X                                   120
PROD_B_A             MAT1                          30
PROD_B_A             MAT2                          50
PROD_B_B             MAT2                          40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very much

RE: Cleaning and Compression Environment Repository

Mark,
I'm not sure what I did wrong the first time. I thought I
covered all the bases, but just to be certain, I did the
whole sequence again and now it works.
Before, I did have problems restarting the environment,
because the repository was locked. I had to kill a
hanging process to solve the problem. Most likely
it was this process that was interfering with my original
attempts.
With this script, you offered some very usefull infor-
mation. Where did you get it? Like I said in my
first posting, I couldn't find any documentation.
The "help" function of "envedit" doesn't show any of
the commands you used. No way, you stumbled
on this by accident.
Thanks,
Pascal Rottier
STP - MSS Support & Coordination Group
Philip Morris Europe
e-mail: [email protected]
Phone: +49 (0)89-72472530
+++++++++++++++++++++++++++++++++++
Origin IT-services
Desktop Business Solutions Rotterdam
e-mail: [email protected]
Phone: +31 (0)10-2428100
+++++++++++++++++++++++++++++++++++
/* Ever stop to think, and forget to start again? */
-----Original Message-----
From: [email protected]
[SMTP:[email protected]]
Sent: Wednesday, June 30, 1999 1:04 PM
To: [email protected]
Cc: [email protected]
Subject: Re: Cleaning and Compression Environment Repository
The script mentioned is the exact sequence of commands that should be
used.
Did you shutdown the environment first? You cannot clean an environment
repository while the environment is online. I know that these commands
work for both NT and Unix environment managers.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Mark,
I'm not sure what I did wrong the first time. I thought I
covered all the bases, but just to be certain, I did the
whole sequence again and now it works.
Before, I did have problems restarting the environment,
because the repository was locked. I had to kill a
hanging process to solve the problem. Most likely
it was this process that was interfering with my original
attempts.
With this script, you offered some very usefull infor-
mation. Where did you get it? Like I said in my
first posting, I couldn't find any documentation.
The "help" function of "envedit" doesn't show any of
the commands you used. No way, you stumbled
on this by accident.
Thanks,
Pascal Rottier
STP - MSS Support & Coordination Group
Philip Morris Europe
e-mail: [email protected]
Phone: +49 (0)89-72472530
+++++++++++++++++++++++++++++++++++
Origin IT-services
Desktop Business Solutions Rotterdam
e-mail: [email protected]
Phone: +31 (0)10-2428100
+++++++++++++++++++++++++++++++++++
/* Ever stop to think, and forget to start again? */
-----Original Message-----
From: [email protected]
[SMTP:[email protected]]
Sent: Wednesday, June 30, 1999 1:04 PM
To: [email protected]
Cc: [email protected]
Subject: Re: Cleaning and Compression Environment Repository
The script mentioned is the exact sequence of commands that should be
used.
Did you shutdown the environment first? You cannot clean an environment
repository while the environment is online. I know that these commands
work for both NT and Unix environment managers.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Sorting and Grouping in Projects View

In Projects view, when either of two of the three grouping options is selected, there are two sorts in effect: the groups themselves are sorted, and the contents of each group are sorted. These sorts are handled differently, depending on the grouping selected and the sort order selected.
(It appears that there is a bit of the old Apple voodoo in here. The results are arbitrary , but they seem to have been carefully chosen to meet most users expectations. That is to say -- and this is an Apple programming trait -- the arbitrariness is faithful to the expected users' needs, not to logic.)
There are four sorts available, and three groupings
Sorts:
. Name
. Date -- Oldest First
. Date -- Newest First
. Library
Groupings:
. Ungrouped
. Group by year
. Group by folder
So that's twelve possible ways to display Projects in Projects view.
Let's look at a few of them. I'm going to refer to the groups as "Year groups" or "Folder groups" and to the contents of the groups as "Projects". So there is sorting of the groups, and sorting of the contents of the groups (same as "within the group"). These I'll refer to as "Groups sorting" and "Projects sorting".
Sort: Date -- Newest First
Grouping: Group by Year
Result: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
Sort: Date -- Oldest First
Grouping: Group by Year
Results are as expected; a reversal of the "Newest First" sort, but with the same groups: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
Sort: Name
Grouping: Group by Year
Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are sorted alphabetically, descending.
Sort: Library
Grouping: Group by year
Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector. (Note that this last is literal: a Project named "Aardvark Close-ups" if it's in a Folder named "Zoography" will be listed after all the projects in "Yellow Paintings" and all the Projects in "X-rays, thoracic" if those Projects are in alphabetical order by Folder name in the Library. You can see all the Projects in your Library listed on the Library tab of the Inspector by "{Option}+clicking" the disclosure triangle next to "PROJECTS & ALBUMS" twice.)
Sort: Date - Newest First
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, newest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder.
Sort: Date - Oldest First
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, oldest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
Sort: Name
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted alphabetically by name, descending. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
Sort: Library
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector (see note above). Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are listed in the order they appear in the Library).
Ernie [asked:|http://discussions.apple.com/thread.jspa?threadID=2816124&tstart=0]
+I see those icons but note that those projects in folders will be in different sections arranged alpha, and then date within. Am I correct on that?+
The answer is, it depends.
If "Group by year" is selected, the Groups-sorting will always be by date, regardless of the sort order specified. The Groups-sorting order will follow whatever is specified for the Projects sort order (or default to "oldest first").
If "Group by folder" is selected, the Groups-sorting will always be alphabetical, descending, regardless of the sort order specified. (So if you use Projects view, take care in naming your Folders. Use prefixes if needed to force a desired alpha sort.)
If "Ungrouped" is selected, there are no Groups and perforce no Groups-sorting.
That's all I have to say on this topic (today).
Message was edited by: Kirby Krieger

In Projects view, when either of two of the three grouping options is selected, there are two sorts in effect: the groups themselves are sorted, and the contents of each group are sorted. These sorts are handled differently, depending on the grouping selected and the sort order selected.
(It appears that there is a bit of the old Apple voodoo in here. The results are arbitrary , but they seem to have been carefully chosen to meet most users expectations. That is to say -- and this is an Apple programming trait -- the arbitrariness is faithful to the expected users' needs, not to logic.)
There are four sorts available, and three groupings
Sorts:
. Name
. Date -- Oldest First
. Date -- Newest First
. Library
Groupings:
. Ungrouped
. Group by year
. Group by folder
So that's twelve possible ways to display Projects in Projects view.
Let's look at a few of them. I'm going to refer to the groups as "Year groups" or "Folder groups" and to the contents of the groups as "Projects". So there is sorting of the groups, and sorting of the contents of the groups (same as "within the group"). These I'll refer to as "Groups sorting" and "Projects sorting".
Sort: Date -- Newest First
Grouping: Group by Year
Result: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
Sort: Date -- Oldest First
Grouping: Group by Year
Results are as expected; a reversal of the "Newest First" sort, but with the same groups: Year groups are sorted in the same order as Projects. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together.
Sort: Name
Grouping: Group by Year
Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are sorted alphabetically, descending.
Sort: Library
Grouping: Group by year
Result: Year groups are sorted by year, oldest first. Projects which span multiple years are put in multi-year groups. Projects with the same spans are grouped together. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector. (Note that this last is literal: a Project named "Aardvark Close-ups" if it's in a Folder named "Zoography" will be listed after all the projects in "Yellow Paintings" and all the Projects in "X-rays, thoracic" if those Projects are in alphabetical order by Folder name in the Library. You can see all the Projects in your Library listed on the Library tab of the Inspector by "{Option}+clicking" the disclosure triangle next to "PROJECTS & ALBUMS" twice.)
Sort: Date - Newest First
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, newest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder.
Sort: Date - Oldest First
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted by date, oldest first. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
Sort: Name
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are sorted alphabetically by name, descending. Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are sorted alpha-name, descending).
Sort: Library
Grouping: Group by folder
Result: Folder groups are sorted alphabetically by name, descending. Projects are listed in the order they occur in the Library structure shown on the Library tab of the Inspector (see note above). Clicking a Folder's name in the Project viewer drills down to show the sub-Folders and Projects in the clicked Folder (where, again, Folder groups are sorted alpha-name, descending, and Projects are listed in the order they appear in the Library).
Ernie [asked:|http://discussions.apple.com/thread.jspa?threadID=2816124&tstart=0]
+I see those icons but note that those projects in folders will be in different sections arranged alpha, and then date within. Am I correct on that?+
The answer is, it depends.
If "Group by year" is selected, the Groups-sorting will always be by date, regardless of the sort order specified. The Groups-sorting order will follow whatever is specified for the Projects sort order (or default to "oldest first").
If "Group by folder" is selected, the Groups-sorting will always be alphabetical, descending, regardless of the sort order specified. (So if you use Projects view, take care in naming your Folders. Use prefixes if needed to force a desired alpha sort.)
If "Ungrouped" is selected, there are no Groups and perforce no Groups-sorting.
That's all I have to say on this topic (today).
Message was edited by: Kirby Krieger

HTTP Headers - enabling caching and compression with the portal?

Has anyone configured their web server (IIS or Apache) or use a commercial product to flawlessly cache and compress all content generated by the portal?
Compression and caching is critical for making our portal based applictions work for overseas users. It should be doable, just taking advantage of standard HTTP protocols, but implementing this a complex system like the portal is tricky, we seem to be generating different values in the HTTP Headers for the same types of files (such as CSS).
We are running Apache so can't take advantage of the built in compression capabilities of the .net portal. We are running the java vervion. 6.1 mp1, sql server 2000 (portal, search, collab, publisher, studio, analytics, custom .net and java portlets on remote server).
Basically our strategy is to compress all outgoing static and dynamic text content (html, CSS, javascript), and to cache all static files (CSS, javascript, images) for 6 months to a year depending on file type.
Here are some links on the subjects of caching and compression that I have compiled:
Caching & Compression info and tools
http://www.webreference.com/internet/software/servers/http/compression/
http://www.ibm.com/developerworks/web/library/wa-httpcomp/
http://www.mnot.net/cache_docs/
http://www.codeproject.com/aspnet/HttpCompressionQnD.asp?df=100&forumid=322472&exp=0&select=1722189#xx1722189xx
http://en.wikipedia.org/wiki/Http_compression
http://perl.apache.org/docs/tutorials/client/compression/compression.html
https://secure.xcache.com/Page.aspx?c=60&p=590
http://www.codinghorror.com/blog/archives/000807.html
http://www.howtoforge.com/apache2_mod_deflate
http://www.ircache.net/cgi-bin/cacheability.py
http://betterexplained.com/articles/how-to-optimize-your-site-with-http-caching/
http://betterexplained.com/articles/speed-up-your-javascript-load-time/
http://betterexplained.com/articles/speed-up-your-javascript-load-time/
http://www.rubyrobot.org/article/5-tips-for-faster-loading-web-sites
http://betterexplained.com/articles/how-to-optimize-your-site-with-gzip-compression/
http://www.gidnetwork.com/tools/gzip-test.php
http://www.pipeboost.com/
http://www.schroepl.net/cgi-bin/http_trace.pl
http://leknor.com/code/gziped.php?url=http%3A%2F%2Fwww.google.com
http://www.port80software.com/surveys/top1000compression/
http://www.rexswain.com/httpview.html
http://www.15seconds.com/issue/020314.htm
http://www.devwebpro.com/devwebpro-39-20041117DevelopingYourSiteforPerformanceCompressionandOtherServerSideEnhancements.html
http://www.webpronews.com/topnews/2004/11/17/developing-your-site-for-performance-optimal-cache-control
http://www.sitepoint.com/print/effective-website-acceleration
http://nazish.blog.com/1007523/
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/IETechCol/dnwebgen/IE_Fiddler2.asp?frame=true
http://www.fiddlertool.com/fiddler/version.asp
http://www.w3.org/Protocols/rfc2616/rfc2616-sec13.html
http://www.web-caching.com/cacheability.html
http://www.edginet.org/techie/website/http.html
http://www.cmlenz.net/blog/2005/05/on_http_lastmod.html
http://www.websiteoptimization.com/speed/tweak/cache/
http://www.webperformance.org/caching//caching_for_performance.html
http://betterexplained.com/articles/how-to-debug-web-applications-with-firefox/
Edited by tkoenings at 06/18/2007 6:26 AM

Hi Scott,
Does Weblogic platform 8.1 supports netscape? We have developed a portal which
works perfectly on IE but it dies in netscape. Is netUI tags not supported in
Netscape?
Pls reply
manju
Scott Dunbar <[email protected]> wrote:
From a pure HTML perspective Portal does it's rendering with nested
tables.
Netscape 4.x and below have terrible performance with nested tables.
The
problem is not the Portal server but rather Netscape on the client machine.
If IE and/or a recent version of Netscape/Mozilla is not possible then
there are
really only two options:
1) Faster client hardware - not likely to be an acceptable solution.
2) Minimize the number of portlets and the complexity within the portlets.
Neither of these solutions are a great answer, but the 4.7 series of
Netscape is
getting pretty old. Having said that, we've got customers who want to
continue
to use IE 4 :)
Again, though, this problem is, I'm afraid out of our hands. It is the
client
rendering time that is the issue.
cg wrote:
Does anyone know of any known reasons why the 7.0 (did it also with4.0) portal
pages can take up to almost 30 seconds to load in Netscape 4.7? I knowit is a
very generic question but our customer still uses 4.7 and will notuse the portal
b/c it takes so long to load some of the webapps. What the pages willdo when
loading is that the headers will come up and when it gets to the bodyof the page
it seems to stall and then comes up all of a sudden. For some of thepages it
takes 6 seconds and for others it takes about 24-27 seconds.
We have suggested using IE only but that is not an option with allof the customers
and getting a newer version of Netscape is also out of the question.
Any suggestions would be greatly appreciated.--
scott dunbar
bea systems, inc.
boulder, co, usa

Errors While Transporting Transformations and DTPs

Hi Experts,
Iu2019m trying to transport transformations and DTPs from DEV to QA and am getting the following error messages. Does anyone know whatu2019s happening and how I can fix this?
Thanks,
Janice
The following are excepts from the log of the transport organizer with further SAP supplied information on the error messages.
Transformations:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4
No rule exists
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Message no. RSTRAN802
No rule exists
Message no. RSTRAN514
DTPs:
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Conversion of T version from DTP DTP_4FG5GXT9OLNN3YM3QFMW9V3W5 to M version...
Conversion of T version from DTP DTP_4FK894515QD0O9UM4JSJPIB91 to M version...
Activation of Objects with Type Data Transfer Process
Saving Objects with Type Data Transfer Process
Saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Message no. RSTRAN715
Diagnosis
The transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (not executable).
This can be caused, for example, by a change made to the source object or target object of the transformation.
The transformation connects the source to the target .
Procedure
The transformation must be reactivated.
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Message no. RSO843

Thanks so much everyone for your suggestions. Iu2019ve tried them all and hereu2019s what I now have:
Anil u2013 Active datasources were included in the original transport. I tried retransporting and got the same error messages.
Voodi u2013 0ACCOUNT_TEXT was resident in the Q system as a 3x datasource. I replicated it as a 70 datasource in D and this is what was transported to Q. It is a 7.0 datasource in Q. I got the same error messages when I tried transporting just the transformations.
Jayaram - 0ACCOUNT is active in the Q system and is currently being used in transformations other than the one Iu2019m trying to import.
Godhuli u2013 I not only re-replicated the datasource in D, I reactivated the transformations and DTPs and resaved the InfoPackages. I tried retransporting with a new transport request and it failed with the same error messages.
Is there anything else anyone can think of?
Thanks,
Janice

Error While Transporting Transformation and DTP

I am trying to transport Transformation and DTP.But its giving following error.
<b>Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
InfoObject xxxx has a characteristic routine, but no rule
InfoObject xxxx has a characteristic routine, but no rule
InfoObject xxx has a characteristic routine, but no rule
InfoObject xxx has a characteristic routine, but no rule
No rule exists
Transformation : Rule 1 could not be imported
Transformation : Rule 2 could not be imported
Transformation : Rule 8 could not be imported
Transformation : Rule 9 could not be imported
Transformation : Rule 60 could not be imported
Transformation : Rule 109 could not be imported
Transformation : Rule 128 could not be imported
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Conversion of T version from DTP xxxx to M version...
An exception has occurred
</b>
Any help.Thanks

Hello,
Do you have any routines in the transformation you are trying to transport. Looks like its missing some routines that needs to be transported.
Hope that helps.

Sorting and Searching String (Please help me)

Hi, Could somn please be of any help here. I am trying to sort this string in alphabetical order and then search for data available but I am not makingprogress with the code. Does anyone have any advise or better still the code to solve this problem... This is hat I have at the moment
import java.util.*;
import java.io.PrintStream;
import java.io.File;
import java.io.FileNotFoundException;
public class coursework2
     public static final int MAX_RECORDS = 20;
     public static String lastName[] = new String[MAX_RECORDS];
     public static String firstName[] = new String[MAX_RECORDS];
     public static String telNumber[] = new String[MAX_RECORDS];
     public static String emailAddress[] = new String[MAX_RECORDS];
     public static int read_in_file(String file_name)
          Scanner read_in;
          Scanner line;
          int record_count = 0;
          String record;
          try
               read_in = new Scanner(new File(file_name));
               // read in one line at a time
               read_in.useDelimiter(System.getProperty("line.separator"));
               while (read_in.hasNext())
                    // Test to see if there are too many records in the file
                    if (record_count == MAX_RECORDS)
                         System.out.printf("Only %d records allowed in file", MAX_RECORDS);
                         System.exit(0);
                    // read in record
                    record = new String(read_in.next());
                    // Split the record up into its fields and store in
                    // appropriate arrays
                    line = new Scanner(record);
                    line.useDelimiter("\\s*,,\\s*");
                    lastName[record_count] = line.next();
                    firstName[record_count] = line.next();
                    telNumber[record_count] = line.next();
                    emailAddress[record_count] = line.next();
                    // Increment record count
                    record_count++;
          catch (FileNotFoundException e)
               e.printStackTrace();
          return record_count;
     public static void write_out_file(int no_of_records, String filename)
          PrintStream write_out;
          int counter;
          try
               // Create new file
               write_out = new PrintStream(new File(filename));
               // Output all reacords
               for(counter = 0; counter < no_of_records; counter++)
                    // Output a record
                    write_out.print(lastName[counter]);
                    write_out.print(",,");
                    write_out.print(firstName[counter]);
                    write_out.print(",,");
                    write_out.print(telNumber[counter]);
                    write_out.print(",,");
                    write_out.println(emailAddress[counter]);
               // Close file
               write_out.close();
          catch (FileNotFoundException e)
               e.printStackTrace();
     // Your 'functions' go here
     //This code sorts out the record after loaded into alphabetical order using
     //the selection sort method
     public static void sort()
     // Your 'main' code goes here
     //The code below uses a binary search method to search for record because
     //record have been sorted and this would make search faster and more efficient
     public static boolean linearSearch(String strFirstName, String strLastName)
          //Set-up data_input and declare variables
          //This linear search searches for record in the contact application.
          //Search for a record using surname only
               int i = 0;
               boolean found = false;
               while (!found && i < lastName.length)
                    if(strFirstName.equals("") && strLastName.equals(""))
                         return true;
                    if(lastName.equalsIgnoreCase(strLastName)){
               //List records from surname only
               System.out.println("Enter your search criteria (last name only):");
                    System.out.print(lastName[i] +     "\t" + firstName[i] + "\t" + telNumber[i] +"\t" + emailAddress[i]);
                    System.out.println("");
                    if (lastName[i].compareTo(strLastName) == 0)
                         //Compare the last name values and type to make sure they are same.
                         found = true;
                              i++;
                              System.out.print(lastName[i] +     "\t" + firstName[i] + "\t" + telNumber[i] +"\t" + emailAddress[i]);
                                   System.out.println("");
                         return found;
          //Search for a record using first name only
     public static void main(String[] args)
          // Set-up data input
          Scanner data_input = new Scanner(System.in);
          // Declare Variables
          int number_of_records;
          String filename;
          int counter;
          // Get filename and read in file
          System.out.print("Enter the masterfile file name: ");
          filename = data_input.next();
          number_of_records = read_in_file("data2.dat");
          //Get new filename and write out the file
          System.out.print("Enter new masterfile file name: ");
          filename = data_input.next();
          //System.out.println("Enter your search criteria (first or last name):");
          linearSearch("*", "");
Am very sorry this is long, the file should be sorted after it is loaded and I have that, You can make up some data with last ane, first name, tel and email to show me an example. Thanks alot
Joseph

Hi Monica, Thanks for you patience with me.
I have tried writing a selection sort method but am having some errors. Could you kindly have a lookand correct me please.
This is the code i wrote
public static void selectionSort(Comparable [] data)
          String strFirstName;
          String strLastName;
          Comparable temp;
          for(int i = 0; i < lastName.length; i++)
               lastName = index;
               for (int j = i; j < lastName.length; j++)
                    if (lastName[j].compareTo(lastName) < 0)
                         lastName[j] = lastName[i];
               //Swap the string values
               temp = lastName[j];
               lastName[j] = lastName[i];
               lastName[i] = temp;
As you requested, below are 4 error messages I had
E:\coursework2.java:101: cannot find symbol
symbol : variable index
location: class coursework2
               lastName = index;
^
E:\coursework2.java:107: cannot find symbol
symbol : variable j
location: class coursework2
               temp = lastName[j];
^
E:\coursework2.java:108: cannot find symbol
symbol : variable j
location: class coursework2
               lastName[j] = lastName[i];
^
E:\coursework2.java:109: incompatible types
found : java.lang.Comparable
required: java.lang.String
               lastName[i] = temp;
^
4 errors
JCompiler done.
JCompiler ready.
Joseph

Transport: Sort and Compress?

Similar Messages

Maybe you are looking for