Transport system objects i.e. contents of table t100 from one system to ano

hello all,
how do i transport contents of table t100 from one system to another...
tried creating a transport request... but when i got an error when used r3tr tabu t100... i got a pop up saying
"System objects cannot be transported directly"
know abt restore... any other way of doing it...
Regards, Jatin

Hello all,
Thanks for the support so far...
to clarify the problem in more detail...
when i add R3TR TABU T100... and hit enter... i get the error message at the bottom of the screen...
" System objects cannot be transported directly (e.g. T100, TRDIR, TFDIR..) "
When i double click the error message, i get a pop up, detailing the "KINDS" of tables which cannot be
transported. (like in my case is t100)...
The only help which i get at the bottom of the popup is...
"Direct transport of these table entries is only allowed for special tools, such as the client copy program."
Any other way of doin it...
Regards, Jatin

Similar Messages

Transferring the data from one system to another system.

Hi All,
   I need to transfer the material master data from one system(e.g - dev1)
to another system (e.g - dev2).
front end application is BSP.
if the user enters the material number 1 to 20 and if he presses the submit
button, the entire data should be transferred to another system.
This transferring of data should be done in background.
1. which method we should opt for this ? either ALE or any other method like XI.
2. Is there any standard bapi function module to transfer the material master from one system to another system.
3. whether this above transferring can be done thru XI and which will be best approach for doing this?
Points will be awarded.
Regards,
Vinoth.

Hi amole,
   Thanks for the reply.
    How to use lsmw for transferring fo data from one system to another system.?
   whether to download the data from one system in excel or notepad and again to upload into other system?
   can u explain me.
Regards,
vinoth.

How to transport CU02 objects from one system to another?

Hi,
How to transport CU02 objects from one system (Development) to another (Quality)?

You need to set up the object dependency IDOC in the partner profile.Message type is KNOMAS. The transaction to send is CLD2.

How to copy a table from one system to another system

Hi all,
can any one say how to copy table from one system(sys1) to another system(sys2).
regards,
nagaraj

There are many ways.
1. Use the already existing transaport request number for that table to do the transaport (Active)
2. Create mannual transport request from SE01 and in the object list enter following
R3TR -- TABI -- <Table Name>
And do the transaport.
3. Ask your basis consultant to do the transaport from oracle layer.
Thanks,

Transporting Transport Request from One System to other

Hi All,
I want to create tranport request from ECC 5.0 System to ECC 6.0 system.
Please let me know steps for creating transport request and transporting transport request from one system to other system.
Thanks in advance.
Best Regds,
zubera

Hi,
You cannot transport request from ECC5.0 to ECC6.0.
Instead follow this:
In ECC5.0
Include all the objects into a transport request & provide the transport request no. to BASIS.
BASIS team will create 2 files for you based on the transport request no.
in ECC6.0
Provide the 2 files to BASIS Team & ask them to import them.
The objects would be available in ECC6.0
Best regards,
Prashant

Export or transport all the RFC destination from one system to another syst

Hi
Is there any method to Export or transport all the RFC destination from one system to another system

Hi,
the information is stored in table rfcdes.But there are also some other RFC*-tables which have some relations. Nevertheless the RFC-connectons will possibly not work anymore in the new system(depending on the release your systems are), as the passwords are stored in the Sec store with system-dependent keys.
b.rgds, Bernhard

Manual transfering of Report Painter from one system to other

Hi!
I need to do manual transfering of Report Painter from one system to other.
No transport request is available, that is why it is manual transfering.
How to do it?
For example I have this information:
Object file name: Y_P04_99000009
Object description: "Report Painter LEI-411 (library 8A2)"
Will reward,
Mindaugas

I hope you can export from one client and import to other client.
Already Ferry Mentioned GR22 Transaction.
Use GR22->utilities -> export ( Keep it as one .txt file)
Login into other system ,
Use GR22 -> Utilities->Import ( Use .txt file here)
Thanks
Seshu

Send PO from one system and create a SO in another system

Hello Gurus
ii am learning ALE IDOC and would like to do a complete hands on practice. I have been doing some basic scenarios and so far i am progressing well.
What i am planning to do:
Now i would like to do an end to end scenairo of sending a PO idoc from one system and this should create a SO in the other system.
Steps i am planning to do:
1). Configure the sending system for a outbound PO idoc
2). Configure the receiving system for a Inbound SO idoc
3). Maintain VOE2(EDPAR) and VOE4(EDSDC) tables for partner information and organization information respectively.
Questions:
1). Am i missing any steps?
2). I am confused on what to maintain in VOE2 and VOE4. Which information of PO should i maintin in VOE2 and VOE4 in the receiving system?
~Suresh

Hi Suresh,
this might be of some help.
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
kindly reward if helpful.
cheers,
Hema.

Copying table rows from one table to another table form

Hi
I have a problem about Copying table rows from one table to another table form.On jsf pages if you enter command button go anather jsf page and it copy one row to another table row. But when i execute this process for table FORM it doesn't copy I wrote a code under "createRowFromResultSet - overridden for custom java data source support." Code block is:
ViewRowImpl value = super.createRowFromResultSet(qc, resultSet);
try{
AdfFacesContext fct = AdfFacesContext.getCurrentInstance();
Number abc = (Number)fct.getProcessScope().get("___");
value.setAttribute("___",abc);
}catch(Exception ex){System.out.println(ex); }
return value;

Table may be copied with the
expdp and impdp utilities.
http://www.oracle.com/technology/products/database/utilities/index.html

Transfer of workflow from one system to another

Hi all,
I have a requirement as follows:
1) V have developed a workflow in our system and tested
2) now the client wants tht in their system
if it is within our system, v can transport the request to copy tht workflow. But here the system itself is a new one where we need to do all configurations for workflow development. There is a way of storing the workflow as XML and thn importing it into the system.
Can anyone suggest with solution for this transfer from one system to another?
Thanks,
Sivagami

Hi,
1) In the T.code SWDD, Give your Workflow no. and Press enter.
2) Goto Menu, in the first Menu you can find Export and Import.
3) You have to export and save that XML file
4) Then go to the new system in the SWDD, Click import and it will ask of the file, upload the same file which you export from that system
Regards,
Surjith

BOPF, how to transfer BOs from one system to another using ZSAPLINK.

Hi,
Is there a ways to transfer the local objects created using BOPF from one system to another using ZSAPLINK?
Thanks and Regards,
Vineet.

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

How to copy a webi from one system to another system? l

like from production system to another develop system
thanks

You should use Import Wizard to transfer the WebI report from one system to another, say, from DEV to PRD, but if you have also distinguish the DEV data source and the PRD data source, you will also have to modify the underlying universe connection after you transfer the report itself.
If you're on BusinessObjects Enterprise XI 3.1 or above, you may also look at the free tool BusinessObjects Life Cycle Management which can 'promote' contents from one system to another.

How to transfer table data from one client to another client?

How to transfer table data from one client to another client?

Hi,
Look at the Blog
/people/community.user/blog/2007/01/07/transport-table-entries
Regards
Sudheer

Customer master data updation from one system to another system

HI Experts,
I have an issue with customer master data updation from one system to another system. And here only one field is not updating properly from one system to another system. and we found this is through idoc , but we don't find field in any segment.
and the field is called ADDR1_DATA-HOME_CITY.
and this will displayed as different city in address column.
but as per the notes given in help , it is by program , form through only passing. but not able to trace and as per my analysis ADRC table , ADRNR had this field HOME CITY.
And this is for some customers updating wrong one from one system to another system , and for some customers field itself not updating in address column.
please can you suggest any one. here are screenshot for your reference.

that is not enough, it was enough in times before 40b release, but this was in the last century
Please read OSS note 384462 - Master data and addresses
it explains what you have to do for ALE

How to copy WorkFlow from one system to anorther system

Hi All,
I have to Copy the Work Flow from One system to another system. So how to download and upload workflow from SAP. Please help me in this regard.
Thanks,
Ananth

Hi Ananth,
Yes it is. From the workflow builder menu, choose Workflow > Import/Export and export to an XML file.
You can also import from an XML file into a different system in which case the builder will create a new
workflow in a 'New, Not Saved' status. Then when you save it, it will assign the unique IDs for the workflow and each task.
You might also consider getting the program logic for any custom business objects. You can do this by going to the basic data of the business object and doubleclick the program name. From here, you can choose download from the utilities menu to get the program which includes the custom methods, attributes, etc.
Rgds,
Ramani N

Transport system objects i.e. contents of table t100 from one system to ano

Similar Messages

Maybe you are looking for