Transport system problem

Hi,
After upgrading my BY 3.0b kernel version from version 139 to 155 i
noticed that i can't move transports from my bw dev system to my bw
pruduction.in transaction stms when i try to get to import overview i
get the following error - error while reading import queue both in my
dev and production systems.when i try to double click one of the
systems i get the following eeror - function - tms_tp_show_buffer
messagetp_call_failed and on the description i get - Transport control
program tp could not be started , RFC error: /
FUNCTION: 'RfcExecProgram'#Win32 error 193:
%1. When i'm running report - RSTPTEST i get the following error - /
FUNCTION: 'RfcExecProgram'#Win32 error 193: %1 is not a valid Win32
application in the following feilds - RFC ping,RFC link offline call.On
the other feilds everything is fine.I also checked in transaction sm59
rfc connections to and from dev system to production system - all test
completed successfully.
Please advice quickly since i can't move transports and change requests.
Regards,
Moshe

Hi,
In the error descripttion, i did notice this.
FUNCTION: 'RfcExecProgram'#<<<Not Win32 Application>>
I think there is some Exe files missing to start importing objetcs from DEV to PROD.
So I guess this is system issue.
Usually RFC Errors look like:
FUNCTION: 'RfcExecProgram'# <<Not Enough Space>>
FUNCTION: 'RfcExecProgram'# <<Permission Denied>>
etc..
Talk to OS team and see if you can fix STMS programs. I will see if any SAP Notes need to be implented. Upgrade process in DEV and PROD might be missing one -two tailed end steps.
Thanks,
Anand.

Similar Messages

Error with Transport system not configured that may be related to CHaRM

Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to. Error message was Transport System not configured. Brought up QA and re-distributed system and Transport group and transport requests started working again.

Hello,
if a system, e.g. QA system, will not be available due to a maintenance task,
we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
(Of course you have to reset the status, when QA-system ist started again.)
Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
Therefore the developer should pay attention to the messages, which raise in urgent corrections.
best regards
Horst

Manually delete Transport system - Sandbox system

Hi All
I am have a problem with our transport system on or sandbox system and basically what I want to do it get rid of it and set it up locally.
As our system is a copy of our PRD it still has all the old config, what I would like to do is remove it in the database. Does any one know how to do this?
It is a bit of a 'fudge' but seems the easiest way to do it.
Many Thanks in advance
Phil

hello,
Just delete (if necessary) the STMS configuration and describe your transport planning so that we can help you.
Manoj

Error in Query View Saving -The standard transport system is active.You can

Hi,
I have a query in Dev system which is moved to production and i am able to edit the query in dev.But my problem is when i tried to create a view on that query and save the view, it is throwing me a error
"The standard transport system is active.You cannot save"
Any pointers on this.
Regards,
Pra

Hi
Did you get any feedback on this one?? Im facing the same message when saving a query view..
Thanks
Willem

Large transports a problem?

Hello Folks,
in previous projects we always went for collecting objects into transport by type buttom up e.g.
1. Infoobjects
2. Data Sources
However, now we have enabled standard transport system and get prompts for every object creation. Which is convinient for developers as you save the collection process and you don't forget any object to collect.
General idea we got is to group now objects into process deliveries e.g. shipment load -> this would then contain all DSO, Cubes, Proces chains and even queries associated with this process.
With this approach the transports can get quite packed with objects.
Are large transports of any problem? My assumption is that it simply will run a bit longer on the target and yes there might be some exercise to fix problems (dependent object is in another transport). But overall large transports will work or did anyone had negativ experience.
Thanks for all replies in advance,
Axel

>
Axel wrote:
>
> However, now we have enabled standard transport system and get prompts for every object creation. Which is convinient for developers as you save the collection process and you don't forget any object to collect.
Actually, we dont't have standard transport switched on in our system, as we don't want to collect everything we create, it has its own pros and cons.
Anyway regarding large transports, we once tried to transport 150 queries in one transport along with dataflow (in a landscape where we have several transports transported in a day across tracks). We were not able to release the transport (the reason may be as suggested by shailesh patil ) , it used to get stuck in red.
Finally we managed to take help from Basis and load it in splits
On contrary, this may be successful sometimes too.

No administration authorization in Change and Transport System in CHARM

Hi guys,
I am currently working for CHARM implementation for ECC 6.0
now my problem i created an urgent correction and i released the transport request successfully, but when i try to execute the Pass correction test action it is saying that No import into test system has taken place yet. then i went to task plan and checked there in quality system it is saying No administration authorization in Change and Transport System.
So i asked my basis team to assign the S_TMW_IMPORT profile to user TSADM in 000 client of quality system and additinally our basis team has assigned S_CTS_ADMI. authorization object to TSADM user ID in 000 client of quality system. But SAP has suggested to assign S_CTS_IMPALL and S_CTS_IMPSGL authorization profile to S_CTS_ADMI.
But the problem is S_CTS_IMPALL and S_CTS_IMPSGL authorization profile is not available in 000 client of quality system.
Kindly give your valuable inputs as early as possible. the solution provided by anybody will be rewarded with points.
Thanks&Regards
Raju

can you try assigning the below profiles to that ID.
S_TMW_OPERA
Operator in CTS (All Transport Authorizations)
S_CTS_ALL
Transport system: All authorizations
S_CTS_DEVELO
WBO: Profile for developers in P systems (incl. tasks)
I too have checked and i did not come across the profiles nor objects S_CTS_IMPALL and S_CTS_IMPSGL .
Where did u get the message that they have to be imported ?
Hope it helps.
Award points for the replies that are helpful to you.
Rgds,
Sri

Transport system: errors on import

Hi,
we have a report program with 35 includes as our developing guideline require an own include for each FORM routine.
I made a couple of changes including the creation of new FORMs with new includes. Transport from develeopment to test without problems. After optimization I had finally 3 transports in Test system.
They were imported with STMS together into production. This caused a generation error in one of the transports because an include was reported missing that was in one of the other transports.
It was OK just to re-generate the program in productive system, now everything is fine. But additionally I had to update the navigation index and refresh the object tree in SE80 to see all objects.
But a bitter taste remains: I expected the transport system to be aware of all objects in all transports imported together.
Can you explain this behaviour and give any hints to vaoid this in the future.
TIA and regards,
Clemens Li

Thank you Hans,
so this means that transporting together and transporting in sequence is just the same?
Meanwhile I saw that already my first transport to test system had the error reporting a missing form routine although the routine was included in one of the transported includes.
Possibly a weakness in the system: The new Form has a similar name to an old existing form. The old name is 25 chars long, the new forms name is 29 chars long; old name + 4 chars suffix.
This may have confused the system.
Regards,
Clemens

Question about transport system configure

I have two system dev & prd, the prd is domain controller, the router is from dev to prd.
I want to delete all transport configure and reconfigure it.   Now I login to prd 000, and delete dev from transport system, and use se06 to initial the stms, then I go to stms, the configure has been initialized.
But when I login dev000, the two systems configuration and the transport router is still exist in stms and I can not use se06 to inital it.   I am sure that in prd 000, the configuration has been deleted succussfully.
the configuration is still exists in dev000, and I can not do any operation from dev000 which is not domain controller, and the real control prd000 has been delete by me.
I try to use se06 , but after reinstall cts, I can still see the configuration in stms.
Could you give some solutions , Is there any problem with my operation?
thanks a lot.
Edited by: victor on Jan 11, 2009 9:17 AM
Edited by: victor on Jan 11, 2009 11:07 AM

Hello Victor,
you said PRD is the domain controller and successfully you
deleted previous configuration in PRD ,now login into DEV and
in the same delete the cofiguration in DEV too.when everything
is cleared you start from the first and start adding DEV to the
domain PRD.hope this helps.
regards,
Manjula.

Activating the standard transport system in BI Dev system.

Hello All,
We have a debate going on like whether we need to activate the standard transport system or not in BW Development.
Our user is asking to enable some functionality from a Web Template using the
Save As command. This command enables a user to slice a report and
then save this view as a Portal Favorite. This functionality appears to be
blocked when the transport system is active(Switched on) but he is able to save it when transport system is switched off.
I know that it has to be switched on in order to collect the changes in transport requests in Dev other wise will be collected as Local obects in $TMP.
Also let me know the pros and crons of activating the transport system.
Appreciate if you could throw some light on this and solution to the above problem.
Regards,
Hari

Hi,
It's mentioned the activity of saving BI Query is carried out in Portal, so am assuming you might be using a BEx Web application for this.
If yes, then would suggest you to try once after switching off the standard transport. And instead use BEx transports in Admin workbench.
My understanding can be completely wrong, in which case request you to provide more details on the environment and the steps done.
Thanks,
Swapna Priya.

Change and transport system not configured

hi
Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
How to fix this?
i appreciate your help in advance. Thanks
Madhu

Hi
After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
STMS is mainlly used for moving objects from one system to other system
Regards
kiran kumar.v

Transport System

Hi,
I need help we are planning to upgrade our R3 to ECC 6.0 and our first step is to create a 4.6C Development system to support the 4.6C Production system. We did a copy of our Production system and configure our transport system and now we cannot change Z programs we received this message "Carry out repairs in non-original system only if they are urgent".
Thanks,

Hi Ramon,
local requests ALWAYS do not create datafiles ... they are designed for the "last system" in your landscape or for customers with a single system landscape only.
Therefore, you should typically do not use a virtual system but include it to PRD. But, the virtual system is a nice workaround as well, because this creates then the datafiles and you can use "add to buffer" and import it in PRD - unfortunately you need to be careful with this technique, because you could forget transports ...
as it is an emerngy stuff only, it should be ok.
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Transport all Ques Tab strip in Development to production transport system

By mistake, some one click TRANSPORT ALL QUES Tab strip in Development to production transport system. All objects in development went to production and it is changing the cubes. Is there is any chance to revertback transportation.
Its very Urgent. Can any one help me?
Thanks in Advance

hi
Yes,you can reimport the same request back to your development,ask your basis people,they can do it..
Hope it helps
Thanks
Teja

System copy on target system problem

Dear All
Please help me
I system copy on targer system problem (Java Migration Tool Kit) and debug with SAP NOTE 1119190 but I can't find jmt.jar.
This is log runJmt.log
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.lang.NoClassDefFoundError: com/sap/sdt/util/vers/VersionException
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.createVersion(MigrationToolImport.java:984)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:172)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1062)
     ... 5 more
Thanks

Dear All
Please help me
I system copy on targer system problem (Java Migration Tool Kit) and debug with SAP NOTE 1119190 but I can't find jmt.jar.
This is log runJmt.log
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.lang.NoClassDefFoundError: com/sap/sdt/util/vers/VersionException
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.createVersion(MigrationToolImport.java:984)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:172)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1062)
     ... 5 more
Thanks

Run filters on folder - 4.7.0 Temporary System Problem

When I try to run filters on folder to clean up my inbox into my folders I am getting this message -
An (SMTP) error occurred while sending mail. The server responded: 4.7.0 Temporary System Problem. Try again later (WS). t6sm1646118qai.10 - gsmtp.
How can I fix this, my inbox is horrifying!
Filters do work on start up, but only if I haven't opened them via mobile. And I can create and sort new filters.

That sounds like your using filters to send mail. If you sending lots of mail gmail will simply stop sending as your outside the terms of use. Hence the temporary nature of the error.

What's with the new edition of Pages using Maverick? Google rejects the files with the following message attached "The reason for the problem: 5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked as its content security threat?

I recently upgraded both Pages 09 (I believe) and went to OSX 10.9 Maverick .... now I am unable to send a pages document to a friend on gmail. Google rejects the message and attachment with the following explanation -
The reason for the problem:
5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked because its content presents a potential\n5.7.0 security issue.

Same Problem here
IWORKS 09 pages, keynote, numbers does not send in MAIL (mac) because of "This message was blocked because its content presents a potentialsecurity issue"
its a problem not only on GMAIL but also Live, Hotmail, Yahoo, and other services...
The problem is that gmail and others haved yet accepted the latest iworks 09 files. its a problem that apple can ask then to fix but its up to the gmail and others to fix it.
Solution!!!:
1 - Send it by exporting to office files
2 - Saving the files as old iwork documents
3 - Command P and save as PDF
4 - Save in icloud and send the URL
So you can still send them but have to take a bit more of your time
i hope you understand my english is not optimal
And if you have any questions feel free to ask me

Transport system problem

Similar Messages

Maybe you are looking for