Transport System

Hi,
I need help we are planning to upgrade our R3 to ECC 6.0 and our first step is to create a 4.6C Development system to support the 4.6C Production system. We did a copy of our Production system and configure our transport system and now we cannot change Z programs we received this message "Carry out repairs in non-original system only if they are urgent".
Thanks,

Hi Ramon,
local requests ALWAYS do not create datafiles ... they are designed for the "last system" in your landscape or for customers with a single system landscape only.
Therefore, you should typically do not use a virtual system but include it to PRD. But, the virtual system is a nice workaround as well, because this creates then the datafiles and you can use "add to buffer" and import it in PRD - unfortunately you need to be careful with this technique, because you could forget transports ...
as it is an emerngy stuff only, it should be ok.
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Similar Messages

Error with Transport system not configured that may be related to CHaRM

Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to. Error message was Transport System not configured. Brought up QA and re-distributed system and Transport group and transport requests started working again.

Hello,
if a system, e.g. QA system, will not be available due to a maintenance task,
we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
(Of course you have to reset the status, when QA-system ist started again.)
Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
Therefore the developer should pay attention to the messages, which raise in urgent corrections.
best regards
Horst

Change and transport system not configured

hi
Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
How to fix this?
i appreciate your help in advance. Thanks
Madhu

Hi
After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
STMS is mainlly used for moving objects from one system to other system
Regards
kiran kumar.v

Manually delete Transport system - Sandbox system

Hi All
I am have a problem with our transport system on or sandbox system and basically what I want to do it get rid of it and set it up locally.
As our system is a copy of our PRD it still has all the old config, what I would like to do is remove it in the database. Does any one know how to do this?
It is a bit of a 'fudge' but seems the easiest way to do it.
Many Thanks in advance
Phil

hello,
Just delete (if necessary) the STMS configuration and describe your transport planning so that we can help you.
Manoj

Error in Query View Saving -The standard transport system is active.You can

Hi,
I have a query in Dev system which is moved to production and i am able to edit the query in dev.But my problem is when i tried to create a view on that query and save the view, it is throwing me a error
"The standard transport system is active.You cannot save"
Any pointers on this.
Regards,
Pra

Hi
Did you get any feedback on this one?? Im facing the same message when saving a query view..
Thanks
Willem

Transport all Ques Tab strip in Development to production transport system

By mistake, some one click TRANSPORT ALL QUES Tab strip in Development to production transport system. All objects in development went to production and it is changing the cubes. Is there is any chance to revertback transportation.
Its very Urgent. Can any one help me?
Thanks in Advance

hi
Yes,you can reimport the same request back to your development,ask your basis people,they can do it..
Hope it helps
Thanks
Teja

No administration authorization in Change and Transport System in CHARM

Hi guys,
I am currently working for CHARM implementation for ECC 6.0
now my problem i created an urgent correction and i released the transport request successfully, but when i try to execute the Pass correction test action it is saying that No import into test system has taken place yet. then i went to task plan and checked there in quality system it is saying No administration authorization in Change and Transport System.
So i asked my basis team to assign the S_TMW_IMPORT profile to user TSADM in 000 client of quality system and additinally our basis team has assigned S_CTS_ADMI. authorization object to TSADM user ID in 000 client of quality system. But SAP has suggested to assign S_CTS_IMPALL and S_CTS_IMPSGL authorization profile to S_CTS_ADMI.
But the problem is S_CTS_IMPALL and S_CTS_IMPSGL authorization profile is not available in 000 client of quality system.
Kindly give your valuable inputs as early as possible. the solution provided by anybody will be rewarded with points.
Thanks&Regards
Raju

can you try assigning the below profiles to that ID.
S_TMW_OPERA
Operator in CTS (All Transport Authorizations)
S_CTS_ALL
Transport system: All authorizations
S_CTS_DEVELO
WBO: Profile for developers in P systems (incl. tasks)
I too have checked and i did not come across the profiles nor objects S_CTS_IMPALL and S_CTS_IMPSGL .
Where did u get the message that they have to be imported ?
Hope it helps.
Award points for the replies that are helpful to you.
Rgds,
Sri

Transport system: errors on import

Hi,
we have a report program with 35 includes as our developing guideline require an own include for each FORM routine.
I made a couple of changes including the creation of new FORMs with new includes. Transport from develeopment to test without problems. After optimization I had finally 3 transports in Test system.
They were imported with STMS together into production. This caused a generation error in one of the transports because an include was reported missing that was in one of the other transports.
It was OK just to re-generate the program in productive system, now everything is fine. But additionally I had to update the navigation index and refresh the object tree in SE80 to see all objects.
But a bitter taste remains: I expected the transport system to be aware of all objects in all transports imported together.
Can you explain this behaviour and give any hints to vaoid this in the future.
TIA and regards,
Clemens Li

Thank you Hans,
so this means that transporting together and transporting in sequence is just the same?
Meanwhile I saw that already my first transport to test system had the error reporting a missing form routine although the routine was included in one of the transported includes.
Possibly a weakness in the system: The new Form has a similar name to an old existing form. The old name is 25 chars long, the new forms name is 29 chars long; old name + 4 chars suffix.
This may have confused the system.
Regards,
Clemens

Include Deleted Objects while exporting Namespace in File Transport System

Hi everyone,
What is the use of the option Include Deleted Objects while exporting a namespace using file transport system?
Thanks,
Anu

This is a basic question and should be searched on SDN before posting.
Say, you create a DT in dev and transport it to Test system. In sometime, the requirement changes and now you are supposed to use a WSDL (external def) so no DT / MT will be required and should be deleted. You can delete them in Dev but what will happen to those objects in test - it is not a good practice to delete objects in non-Dev env.
In such situation, you will make these deleted objects part of your transport to test / other env and it will get deleted over there as well.
Hope this answers your query. Make search on SDN / SAP Help for further reading.

Error in Portal: The Standard transport system is active.You cannot save

Hi Experts
In Portal,I am trying to save a BW Query as view in 'Favorites' or 'BEx Portfolio' or 'My Portfolio',I can't able to save it as i am getting
"The Standard transport system is active.You cannot save" msg
Please update me what is the reason and how to resolve this error
Thanks in advance

Hi,
SAP Note : 356018 might be handy.
Regards,
Sandeep Tudumu

Transport system BADIs

Hello, ladies and gentlemen,
I have a question regarding the BADIs in the transport system. I would like to implement the code inspector check of the transport request with some additional features. I know there is the BADI called CTS_REQUEST_CHECK. This one is launched before the standard code inspector integration into the transport system. That means that at the moment when it is executed, I have no idea what will be the users reaction to the "situation".
Can anbody suggest how to reuse the interaction between the system and the user when releasing the request, but still integrate the code inspector there? One of the options would be to have a BADI which is called AFTER the transport with SCI warnings was released.
Any ideas welcome:))
Thanks Otto

Thanks gentlemen,
but I see no news for me. I named one of the BADIs in my original post, I also researched the SE18 entries, I found all this information already. My question is whether there us way how to trick the system (or find another spot) so I can process stuff AFTER the release. I am interested in the state when there were SCI messages but the admin decided to "release anyway". When I only have a BADI which is called before the standard procedure I can`t access the information "what really happens". That means that I either have to dig out all the standard functionality and reuse it in my custom code (and then turn off the standard solution) or let the standard to do the job and process the information after everything happens.
Thanks for your time and effort anyway,
cheers Otto

XI (java transport system)

Guru's
We have installed a XI system (2004s SR2) and now we have to install a java transport system system. Does anybody have some documentation how to setup a Java transport system and some tips and tricks
cheers
Richard

Hi,
Check out the following guides:
Configuring the Change Management Service
http://help.sap.com/saphelp_nw04s/helpdata/en/88/311041b59bef23e10000000a155106/frameset.htm
CMS based Transport in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
How To Transport XI Content Using CMS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Weblog: XI Software Logistics Solution III: CMS
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Also on NWDI
Concepts of the Development Infrastructure
http://help.sap.com/saphelp_nw70/helpdata/en/44/312b1a8bea3ec8e10000000a1553f6/frameset.htm
SAP Network Blog: Configuration of CMS in Central NWDI & SLD to transport XI objects
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
Hope this helps
Cheers
Manish

Question about transport system configure

I have two system dev & prd, the prd is domain controller, the router is from dev to prd.
I want to delete all transport configure and reconfigure it.   Now I login to prd 000, and delete dev from transport system, and use se06 to initial the stms, then I go to stms, the configure has been initialized.
But when I login dev000, the two systems configuration and the transport router is still exist in stms and I can not use se06 to inital it.   I am sure that in prd 000, the configuration has been deleted succussfully.
the configuration is still exists in dev000, and I can not do any operation from dev000 which is not domain controller, and the real control prd000 has been delete by me.
I try to use se06 , but after reinstall cts, I can still see the configuration in stms.
Could you give some solutions , Is there any problem with my operation?
thanks a lot.
Edited by: victor on Jan 11, 2009 9:17 AM
Edited by: victor on Jan 11, 2009 11:07 AM

Hello Victor,
you said PRD is the domain controller and successfully you
deleted previous configuration in PRD ,now login into DEV and
in the same delete the cofiguration in DEV too.when everything
is cleared you start from the first and start adding DEV to the
domain PRD.hope this helps.
regards,
Manjula.

Defining more than one Target transport system

Is it possible to have more than one Target Transport systems defined for a single source System in SLD at one time?

On a similar note with a 3 tier XI landscape (DEV, QAS, PRD) which of the following two scenarios is preferable?
1. In the SLD define each DEV Business System with a target of the corresponding QAS Business System and define each QAS Business System with a target of the corresponding PRD Business System.
DEV ---> QAS ---> PRD
This means that we export ID objects from DEV and then import them into QAS. The objects then need to be exported from QAS for import into PRD
2. In the SLD define the DEV Business Systems with 2 target systems relating to corresponding QAS and PRD Business Systems.
DEV --> QAS
DEV --> PRD
This means that the same export from DEV can be used for import to both QAS and PRD.
Currently we have scenario 1 implemented but I am thinking of changing this to scenario 2 which I believe is a better solution as only one export is required and it is guaranteed that the same objects are being imported into QAS and PRD.
Any Comments?

The standard transport system is active. BI querry on Poral

Hi All,
I am getting the error when saving the querry in BI ie when I click "Save As" button a dialog window opens and in "favourite" tab
i give description (any text ) and click Ok button. Then i get the following error :
The standard transport system is activeYou cannot save
This is carried out in portal.
Please help
Regards

Hi,
It's mentioned the activity of saving BI Query is carried out in Portal, so am assuming you might be using a BEx Web application for this.
If yes, then would suggest you to try once after switching off the standard transport. And instead use BEx transports in Admin workbench.
My understanding can be completely wrong, in which case request you to provide more details on the environment and the steps done.
Thanks,
Swapna Priya.

Transport System

Similar Messages

Maybe you are looking for