Transport target group and routes setting for 2 system landscape

Hi!
I have 2 system landscape (DEV with 2 Clients, 100 CUST and 200 TEST and PRD with productvie client 100).
Currently I have the standard TMS configuration for 2 systems (with tranport layers/routes ZDEV and SAP) .
Now I have to set up my TMS settings client specific
(Development in DEV 100 and transport to the DE 200 TEST and PRD 100).
I have created tranport target group /B-DEV/ with both target goals:
DEV 200 and PRD 100.
<b>What are the further settings for transport routes?
I assume, I have to delete the existing routes ZDEV and SAP?
what are the next steps? </b>
Thank you very much
regards

Ok, I have in DEV system:
Client 100 (Customizing)
Client 200 (Test) (it can be considered as replacement of QAS-system, because we only have 2 systems)
PRD system
Client 100 (Productive client)
So we would like to set up the transport management system client specific, in order to develop in DEV 100 to test in DEV 200 and to use the transports in PRD 100.
Thank you very for your help
regards

Similar Messages

CHaRM - Target group and Virtual System

Hi,
Could anyone let me know if Virtual System and target groups could be used with CHaRM?
Current set up with three systems/clients works fine, however, for a new project with active STMS version with target group and virtual system, even the task list is unable to be created.
Can you please help?
Regards

Hi,
As far as i know, you can't use virtual system for ChaRM.
Regards,
Sanjai

Authorisation for MAster Group or Target Group or Profile set

Hi
How can we restrict certain users from accessing certain Master Groups or Target Groups or Profile sets?
For example we may not want employees in Europe to access target grp pr master grp of Customers in US.
How to do that?
Thanks in advance, reward points for any help.
Regards,
Monica

Hi Monica,
did u find an answer for this query on Target groups
Please let me know
Thanks
Edmonds

In ECC 6.0, can I link a CTS project id to a transport target group?

In ECC 6.0, can I link a CTS project id to a specific transport target group?
I configured two IMG projects, namely, Phase1 and Phase2. In SPRO, I tied them to CTS project ids, DEV_P00001 and DEV_P00002, respectively. In STMS, I configured two transport target groups called /PHASE1/ and /PHASE2/ that I want to link with the corresponding project ids. The intention is that Phase1 transports will go to the clients specified in the /PHASE1/ target group and that Phase2 transports will go to the clients specified in the /PHASE2/ target group
I want to link the CTS project ids to the respective transport target groups so that (e.g.) if a team member creates a transport in SE01/SE09/SE10 and chooses the DEV_P00001 project id from the Project dropdown, then /PHASE1/ will appear as the default transport target. Likewise, if the team member instead chooses the CTS project id DEV_P00002, then /PHASE2/ will appear as the default transport target.
Right now, the user has to remember to choose the correct combination of CTS project id/transport target group.
Solution Manager is NOT involved in this scenario.
Does anyone know of a way to do this in ECC 6.0?

Hi,
Try this it worked for me though,
1. Goto SPRO_ADMIN
2. Select the Project
3. Choose Change
4. Go To Transport Requests TAB
5. Activate CTS Functionality
6. Save it after the Pop Up
7. Go to Se10 and check if the Project Field is getting Populated with the Desired Project or not.
Regards,
Nitin

Transport an Appraisal and Objective Setting Template

Note the following advice pertaining to transporting an appraisals and objective setting template (I have not found documentation about this anywhere else, so hopefully some of you find this useful):
Scenario:
You have maintained your templates in PHAP_CATALOG_PA in the main config client, and you have transported all other configurations (basic settings, etc.) to your unit test/integration test environment.
However, although you have right-clicked the category groups and templates to be transported and included them in a transport request, you find that only some of your configuration (or perhaps none at all!) is arriving in the target client when the transport is performed.
You may initially be able to work around this by downloading/uploading your config, but once your templates contain more complex configuration (such as using dynamic element references, etc.) you will find that this is no longer a feasible approach.
Cause & Resolution:
The problem is caused by outdated information in the workflow definition environment (transaction SWU3), and specifically the section labeled "Check Entries from HR Control Tables".
Run transaction SWU3, expand tree node "Maintain Definition Environment" (which should be marked with a red cross at this stage) and click on "Check Entries from HR Control Tables". The information presented in the right-hand pane indicates that:
If there are errors regarding the transport objects PDST or PDWS, the relevant entries are not maintained in table SOBJ. You can use the report RHSOBJCH to rectify this later.
Proceed as suggested and run report RHSOBJCH (through SE38 or SA38) in the config client (i.e. where the templates are to be transported from). This has no side-effects I am aware of other than updating the reference information required.
If you now run SWU3 again you should find that the "Check Entries from HR Control Tables" node is marked with a green tick.
Simply go back to the catalog, include your cat.groups & templates in a transport again, and Voila! Our work here is done.
Happy transporting...
Side-note: You may ask (as I did) what transporting of appraisal templates has to do with workflow, but it just so happens that the PD objects and infotypes associated with appraisals (VA, VB, VC, etc.) are transported through the same mechanism as workflow templates (which are also PD objects). if you peek inside the transport you will note that everything to do with the template and category group configuration is bundled inside PDWS and PDST transport objects...
Edited by: Francois Van Lille on Jun 29, 2009 9:58 AM

>
A. Jimenez wrote:
> Hi Francois,
>
> I have successfully transported Categories and Templates, but I have customized "appraisals process", which seems to create VH Objects, and this objects or customizations are not added in the transport order.
>
> You or anyone know how to transport this customization?
>
> Thanks in advance
Hi Abe,
what is the appraisal process you are talking about? The new stuff in ep4 where you define the process and steps which create the roadmap at the top of the document? if so SAP does not have a great straightforward solution, but they did provide us some options.
you can check out this thread and if you want I can send you the full document that is referred to in the post.
EP4: Performance Management-Flexible-Transporting the Tab & Process config

CRM Target Groups and Product Segments - BW and BPS settings

Hi gurus,
I have some questions regarding the CRM Target Groups and Product Segments as it relates to BW and BPS planning layouts.
1. When a target group is created in CRM, is it supposed to also be create master data entry for the object 0TGGRP_ID in BW? If it is, what kind of settings need to be made to ensure that? When we create target groups in our CRM instance, we donu2019t see the master data being updated for the 0TGGRP_ID info object.
2. Where exactly (in BW) is the relationship between the target group and the underlying customer/business partners stored/updated? We have a requirement to use target groups for defining the trade promotions and still being able to explode and plan on (individual) customers in the embedded BPS Planning layout. I believe that we need to have target group and associated customer assignments stored somewhere (?) in BW and use BPS characteristic relationships to populate all the possible combinations for a target group ID being passed from CRM. Am I correct in my assumptions? Any ideas if SAP has already delivered something similar in the BPS business content for TPM?
3. We are planning to use product segments to define the trade promotions as well. I believe BW info object is 0CP_SEGMENT. Similar to what I mentioned in Question 1, I donu2019t see any master data being updated for 0CP_SEGMENT. Am I looking at a wrong BW object or missing some key settings?
4. Where is the relationship between a Product Segment and the associated products stored/updated in BW? How do I create a trade promotion using a product segment and make the BPS planning layout populate individual products in the lead column?
Thank you for your help

Hi Anna,
After reading your post, what i understand is that there is no existing relationship present in CRM system between the Org BP and the contact person BP.
As per my Knowledge in order to create a Target group with Contact Persons you should have an active relationship persent in the CRM system bewteen the BP and the Contact person.Now as your sceanrio suggests that the Contact person's are present in the BW system but not in CRM, i would assume that the relationship also exsits in the BW . So if it does then your BW team should be able to help you in creating the necessary infocube with there analytical tools and you can then use there cube as the datasource and create the necessary Target Group with Contact persons.
Comming to the second part of your question, your guess is absolutely right but to give you more detailed infomation , the BP ID is converted in a unique GUID and this is passed into the program to retrive the necessary information from the BP after the campaign is executed.
Hope this helps!!
Regards,
Naveen

Transport target group

Hi All,
We have one transport target group /DEVALL/ .Which we deleted and created two target group for importing into different client as /DEV100/ and /DEV200/.
Now alll transport request which has been assigned to /DEVALL/ are coming as a local request and after released they were not going to import in any of the client.
Please let us know the way by which we can assign new target group (/DEV100/ and /DEV200/) to all these change requests (TR's).
As we can manually assign target to change request at the time of import.But we want to find out the way of assign target group before releasing the TR's
Thanks in advance for your valuable and fast response.

Hi Sumit,
I am only aware of making this change using transaction se09 and se10. You select the change request number 'Not the task' by double clicking on it. In the resulting screen, select the properties tab. The 'Target' field in the screen can be used to perform the reassignment.
Sajit

Target groups and marketting compaigns

Hello all,
I am seeking for information about target groups and campaigns,
Where target group ID and compaign ID are stored?
Where can I find function modules that returns all bp's belongs to target group, and all target groups belongs to campaing?
All help wil be appriciated,
Rika

Hi Rika,
You will find campaign detials in table CGPL_TASK. Use function module CRM_MKTTG_TG_READ to get all bp's belong to target group.
Thanks
Swagatika

WHAT IS THE DIFFERENCE BETWEEN PHRASE GROUP AND PHRASE SET?

WHAT IS DIFFERENCE BETWEEN PHRASE GROUP AND PHRASE SET?

Hi Ramya,
Definition of a Phrase group is a number of phrases contained in a phrase library grouped according to logical criteria. A phrase can be assigned to only one phrase group.
Phrase set is grouping of phrases for a purpose which includes allowed phrases for a value assignment type and Default phrases for a value assignment type. A phrase can be assigned to a number of phrase sets.
Hope this helps you
Best Regards
Srinivas

How could I transport the variant and layout setting in SE16

Hi ABAPers,
Would any of you please advise me on how to transport the variant and layout setting in SE16? I cannot see any transport request in the menu but would like to understand how to manage through transport requests.
Thanks in advance
Kind regards
taro

Hi Taro ,
Use the below 2 links to solve your problem,
Problem in Layout Variant transport - variant not attached to TR
http://www.sap-img.com/basis/transport-guide-tips-for-different-sap-objects.htm
Regards ,
Saravana

How do your turn off the "black and White" setting for the visually impaired?

How do you turn off the "black and White" setting for the visually impaired? Also known as the "tripple Click"

Settings>General>Accessibilty>White on black--> Off

About report groups and read programs for the object EC_PCA_SUM

Hi Friends,
Hope every one is doing well..!
I've an issue with the report groups and read programs for the object EC_PCA_SUM. As we know that the report groups and read programs available for this object in the application customizing are used to analys the archived data.
That is these programs comes into picture after the archiving operation.
For more information, you can visit the below web site:
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/e4/69f353b75a11d1b5850000e82debc6/frameset.htm]
Now, my question is how would I check the code for these analysing programs available for this object. I can't see this in SE38.
Thanks to reply for this..
Full marks will be awarded.
Regards,
Shamim

Hi Lakshman,
Thanks for the reply.
Hi Deiter,
You're right.
Your provided transaction "GR55" helped me to find out the program name for a particular group. However, these are just Write and Painter reports.
But can you please let me know the functionality of these report groups ?? what are these used for ???
Do we have these programs for other archiving objects like CO_ITEM,CO_ML_BEL,MM_MATBEL,CO_ORDER,
PP_PLAN,PP_BKFLUSH ??
More points will be awarded.
Thanks a lot.
Regards,
Shamim
Edited by: S H A M I M on Sep 19, 2008 3:19 PM

Any tutorial for building adapters and routing services for JBI container ?

Hi
Thank you for reading my post
is there any tutorial for Sun JBI container ?
I want to know how i can build/deploy JBI components like adapters and routing service for Sun JBI container .
another question is that , is it based on OpenESB ?
thanks

You can find a white paper on writing a JBI service engine here:
http://java.sun.com/integration/reference/techart/DevelopingAServiceEngineComponent-1-2.pdf
Also, there is a lot of information on JBI and Open ESB here:
http://java.sun.com/integration/
You ask if the Sun JBI container is based on Open ESB - it's actually the other way around: Open ESB is based on the Sun JBI container. The JBI container is a JSR208-compliant implementation, and Open ESB builds upon that implementation to add full ESB capabilities.
hope this helps -
mark

When you back up your Iphone/Ipad it backs up for camera roll. but when you take pictures and it uses photo stream, does that mean there are two copy's of your photos on icloud one set for photo stream and one set for backups?

When you back up your Iphone/Ipad it backs up your camera roll. but when you take pictures and it uses photo stream, does that mean there are two copy's of your photos on icloud one set for photo stream and one set for backups?

What do you mean by storage quota, does that mean i could be photo streaming about 1gb of photos and it does not get taken away from my free 5bg.

How & Where to create the Target Groups and Transport Targets for Business

Hi Experts,
I am Transporting the scenarios from Development 500 client XI system to Development 500 client PI7.1 system. I have taken the exports of Technical system and Business System from the DEV XI system and correspondingly have imported the same in the PI7.1 system. I can see the all the business system in the Business system SLD of the PI7.1 system. I would like to assign the Business System Groups and Transport Targets for every business system that I want to transport. How can I do that ? Whether this is to be done in DEV XI system or the DEV PI system? Can somebody elaborate the step by step method to create the Groups and Target system for the every Business system so that I can import the object of the Integration Directory sucessfully................................
Thanks & Regards
suk4023
Edited by: sukande on Aug 17, 2010 8:18 AM

Hi Supriya,
Thanks for the reply and good illustration............Still going further after defing the destination for transport in the source SLD Business system ( XI dev server) , then we should export it and subsequently import it in the SLD of the PI 7.1 ie the destination server. Then we should transport the objects of Integration Repository and Integration Directory to the new PI7.1 server. Is this the right way to proceed.? Hope that this will not give the error while importing the objects in Integration Directory. An typical which comes while importing the objects in the Integration Directory is as follows:-
*Import failed because of business system transfer of object Communication Component | PCM: Obligatory transport target for business system PCM not found in System Landscape Directory*
Pls clarify on this ......
Thanks & Regards
suk4023

Transport target group and routes setting for 2 system landscape

Similar Messages

Maybe you are looking for