Transport the created Storage Bin Automatic from develop to quality LS10
Hello,
My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
Cheers,
Marta
I could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
Thank you very much.
Similar Messages
-
Is it possible to Extend the Storage Bin Length from 10 Char to 25 Char
Dear Experts,
We have a Requirement for Extending the Storage Bin Length from 10 Character to 25 Character.
Question 1:
Is it possible to Extend or Not?
Question 2:
Even if we extend what will be Impact on the Current Storage Bin Numbers used now.
Thanks for your support in Advance.No, you can't change length for storage bin field in standard and also it is not suggestable to client. If client forcing on requirement, You can suggest like below.
create one more field for EXT.storage bin by using enhancement and do one customized report for show as , storage bin number+EXT.storage bin = actual storage bin.
For only client reference you do this report and in standard reports it will not show like this else tell to client ---> it is not possible, because it is replicating and using at different programmes. -
Create storage location automatically for movement type 261
Hi Experts,
Currently we're inprocess of implementing "create storage location automatically" for reservation, and I've done with the configuration for both reservation side (Define Default Values) and movement type side (GI/transfer posting - Create Storage Location Automatically).
For movement type 201, new storage location successfully extended/created using T-Code MB21 (Create Reservation). But we found an error message while conducting the same thing for movement type 261 (which only can be created using T-Code IW31 (Create material reservation form Work Order).
Did we missed any required configuration? Pls kindly advice on what we should do.
Thanks a lot. Really appreciate the prompt response.
Rgds,
MDHere's the current situation,
We configured the plant/storage view (SPRO), most of materials already extended to desired plant and storage location. Commonly, we can extend or create any materials for certain plant and/or storage location by maitain material master data (using T-Code MM01).
Recently, we develop the additional configuration to activate "automatic create storage location" for reservation, aligning with the movement type for Goods Issue (201,221,261,301,etc).
Let's say we have material number 123456789 and currently assigned to plant YYYY, but not extended to storage location XXXX. By performing T-Code MB21 (create reservation) with movement type 201 inputted, the respective material (123456789) is automatically created for the XXXX storage location.
But the above condition is not effected while performing the same thing using T-Code IW31 (create material reservation via Work Order) with movement type 261 (GI for Order).
Any idea to perform create storage location automatically while creating reservation for movement type 261? is there any possible configuration or procedure to be added?
Thank you -
Hierarchy transport from developement to Quality?
Dear SDN,
Hierarchy transport from developement to Quality.
I have created one balance sheet Hierarchy on 0Account infoobject.
Could you please tell me how to transport hierarchy from development to Quality.
Waiting for response.
Thanks & Regards,
KiranHi Kiran,
Kiran Hierarchy data can be loade from source system, flat file or manually maintained in system.
since you have done manulally you can do the same in other systems also, but you need authrizations to maintain manually
I have manually created my balance sheet hierarchy using RSH1 transaction code.
you have do the same in quality also, since all required infoobjects are available in quality system, manulally create balance sheet hierarchy using RSH1 transaction code in Quality system.
check whether you have authorization to manually create in Quality system. you have to do the same procedure in production also i guess.
Regards
Daya Sagar -
Transport Table with Data from Development to Quality
Hi
Requirement:
Transporting Table with Values from Development to Quality System.
I have a Z* - table, appended one field at the end.
I need to transport data along with the table structure from Development System to Quality System.
In Development System, I have assigned the Transport request in Client 100(We can't add data to the table in this client).
What needs to be done to migrate the new table structure with Values.
Thanks in Advance
Regards,
Baburaj
NOTE: the requirement is to transport table and table entries through a transport request.
There should not be any manual update for the table in the target System (Quality System).Check the delivery class assigned to the table. Please see the documentation
Delivery class
The delivery class controls the transport of table data when installing
or upgrading, in a client copy and when transporting between customer
systems. The delivery class is also used in the extended table
maintenance.
There are the following delivery classes:
o A: Application table (master and transaction data).
o C: Customer table, data is maintained by the customer only.
o L: Table for storing temporary data.
o G: Customer table, SAP may insert new data records, but may not
overwrite or delete existing data records. The customer namespace
must be defined in table TRESC. (Use Report RDDKOR54 here).
o E: System table with its own namespaces for customer entries. The
customer namespace must be defined in table TRESC. (Use Report
RDDKOR54 here.)
S: System table, data changes have the same status as program
changes.
W: System table (e.g. table of the development environment) whose
data is transported with its own transport objects (e.g. R3TR PROG,
R3TR TABL, etc.).
or during client copy
the data of client-specific tables is copied.
Classes C, G, E, S: The data records of the table are copied to the
target client.
Classes W, L: The data records of the table are not copied to the
target client.
Class A: Data records are only copied to the target client if
explicitly requested (parameter option). Normally it does not make
sense to transport such data, but is supported to permit you to copy
an entire client environment.
or during installation, upgrade and language import
behavior differs here for client-specific and cross-client tables.
nt-specific tables
Classes A and C: Data is only imported into client 000. Existing
data records are overwritten.
Classes E, S and W: Data is imported into all clients. Existing data
records are overwritten.
Class G: Existing data records are overwritten in client 000. In all
other clients, new data records are inserted, but existing data
records are not overwritten.
Class L: No data is imported.
Cross-client tables
o Classes A, L and C: No data is imported.
o Classes E, S, and W: Data is imported. Exisitng data records with
the same key are overwritten.
o Classe G: Data records that do not exist are inserted, but existing
data records are not overwritten.
ehavior during transport between customer systems
Data records of tables of delivery class L are not imported into the
target system. Data records of tables of delivery classes A, C, E, G, S
and W are imported into the target system (this is done for the target
client specified in the transport for client-specific tables).
se of the delivery class in the extended table maintenance
The delivery class is also analyzed in the extended table maintenance
(SM30). The maintenance interface generated for a table makes the
following checks:
o You cannot transport the entered data with the transport link of the
generated maintenance interface for tables of delivery classes W and
L.
o When you enter data, there is a check if this data violates the
namespace defined for the table in table TRESC. If the data violates
the namespace, the input is rejected.
Thanks, -
Function of create Storage Location Automatically
Whats the function of the following Tab in SPRO.
SPRO- Materials management - Inventory management and Physical Inventory - Goods issue/Transfer Posting - Create Storage Location Automatically
Please adviseHi,
This is the case for, if you work with negative stocks and a material's first movement may be an outward movement that is Goods issue or Transfer posting.
If the material master record is not extended to the storage location which is giving at the time of goods issue / transpfer posting, system won't allow to post the document. First you have to maintain material master record for that SL, then only system will allow postings.
In such cases if the material master record is not created for the storagelocation, SAP having facility like that system can update / create SL data for that materila master record automatically by the system during GI / TP postings.
For that you have to activate SL Create automatically checkbox aganist Plant as well as Movement type. You have activate in both the settings, then only system will update/create SL data in the MMR.
If the Negative postings allowed means eventhough stock is not there, system will allow to issue stock and inventory will show with negative sign.
For ex: Stock is zero. You have issue 25 with the movement type 201, system will allow to issue the stock. But inventory will show -25 for that material (Check in MMBE).
This is case for, if you work with negative stocks and a material's first movement may be an outward movement that is Goods issue or Transfer posting. Then only these setting will helpful.
Regards
KRK -
Material appearing in the another Storage Bin
Hi,
I have maintanined storage bin in material master (view:warehouse managment2) as "OPEN" for my material 78.59.32.1551.
After doing 105(MIGO),for my material 78.59.32.1551,when I checked stock by using tcode LS24,the material is showing in the another storage bin:04-DR-01 instead of "OPEN".
It should appear in the "OPEN". Am I right? If no ,please correct me .
Any solution???
With Regards,
Jaheer.Uncheck negative stock for the storage type you are picking from. IMG - LE- WM-Master Data-Define Stg Type uncheck 'Allow Negative Stock'.
-
Transporting ODS from Developement to Quality server
Hi,
In Quality server I am haveing ODS with out one navigational attribute included in it but it contains data.same is avaliable in development with navigation attribute object included in it.Now we want to transport this ODS from development to Quality.Kindly let us know if we need to delete the data from ODS in quality before moving this ods which is in the delevopment.Technical name for both ods is same.
Regards,Hi,
You don't have to delete the data. The transport will work fine. But, the more data you have, the longer the transport will take.
Cheers,
Kedar -
Transporting Report from Development to Quality
Hi,
1. I need to transport Report & Custom Data Source from Development to Quality System. Please help me about procedure & prerequisites .
2. When I search a report from Business Analytics--> Design Reports . I need Hide some reports. Do we have any such possibility ?
Regards,
RohitRohit,
As Eduardo said there is a possibility to Assigned to a Work center a way to make Reports visible to users. But from 1405 we can control the Visibility of Reports as per business role as well.
Please follow steps below to make this feature available:
1) Go to "Administrative Analytics Settings" configuration element.
2) Check the check box of " Allow the assignment of Business Roles "
This will show one more Business role Tab when you are trying to assign the reports.
Please see image for details. -
Transporting an Object from Development to quality and then to Production
Hello SAP Friends
I want to know the step by step navigation for Transporting an Object from Development to Quality and from there to production..
Please give some detailed Navigation...Hi Kiran,
use transport connection to collect the objects to request, rsa1->transprot connection.
use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
remember to assign source system, click yellow box with X icon and mark the source system.
after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
take a look transport docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Re: Transport Organizer---
transport query (bex objects)
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
hope this helps.
(Courtesy AHP from Re: transport)
Bye
Dinesh -
How to transport/move a table with data from development to Test to Production
Hi,
How to transport/move a table with data from development to Test to Production..? Export-Import a Delivery Unit does only the structure and not the data
Reg
SriHi Sri,
You cannot transport Data via Transport route in HANA, you can only transport code changes/Structure via DU. For Data movement, you either have a do a export/import from a flat file or replication from a Source System to HANA.
Thanks Much,
Abhishek -
Not Printing the source storage bin in the layout
Hi Gurus
As i am printing the layout to pick the goods for delivery, in which iam not getting the source storage bin for some deliveries only. sometimes its picking and some times not, what has been the reason behind it. i have take the help of an Ababper to check the conditions if any for that filed. but i cannot find any.
Please help me,
Thanks in advance,sorted out by setting the SPAD - Device types
format, just added the zxxx format to this and now it is working -
When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document
FingerPrint is not listed as supported on this page: AirPrint Basics
You might check with the makers of FingerPrint. -
If I trasport a object from Development to Quality
Dear One's,
I have query, If I trasport a R/3 source system object in BW from Development to Quality and then to Production. How this will reflects in Dev., Qty & Prod. of R/3 source systems?
Thanks in advance,
RajHi Rajasekhar,
when you are talking of the source system dependent objects it should be a datasource.
Data Source should be transported first in r3 and then in transports starts in BW.
When you are talking about BW transports which are not dependent on souce system there is no need to collect the source system while transporting.
When the object is transported to Quality or from quality to production the source system mapping should be accordingly changed to R3 quality and R3 production.
For this to haapen you should maintain an assignment in Rsa1.
go to rsa1> tools> conversion of logical system names.
go to new entries--> enter your r3 development server logical system name and in next column enter r3 quality system logical name.
Save the assignment.
Hope this is helps.
Please correct me if Iam wrong.
Regards
Mahesh -
Transporting Objects from Development to Quality
Hello Friends,
I am working on a project where I have created Cubes, InfoObjects, DTP, Transformations and Open Hub Destinations in a Development Client.
Now It's time to transport all these objects in to Q-Client.
Can any one let me know the steps to do so? This is really very urgent.
Your help is greatly appriciated.
Thanks in advance,
KavitaHi
Before transporting your complete data model
Transport all the required info objects and its attributes First.(If you do not tranport the info objects first then when you transport the infosource the import will be failed saying that inactive info objcts found)
Then replicate the required datasources in the target system. (If you do not replicate before transporting the request into the target system then it will give an error log saying that Fields does not exist in the dataosurce XXXX)
So do the above two steps first and then proceed
Then you can collect all the objects , Cube , Infosource, ODS, Open hub etc and transport it.
You can transport from SE01 or SE09
Go to SE01
Select Modiafiable and display.
Release the task of the corresponding request first and then the Request
Go to STMS and then select your target system and import the transport request.
Regards
M.A
Edited by: M.A on Jun 19, 2008 10:05 PM
Maybe you are looking for
-
Flip text vertically in top row
I need to have the top row (banner) text run vertically because the data below is only 2 o3 digits wide. I can't seem to find the area where I can either flip or change the text direction of that row. Please advise.
-
i want to delete some tabs from the bar between the navigation bar and the tab bar. == This happened == Not sure how often == recently
-
On another PC it works. I can't find any difference in the script line 15. I could run the Script 1 time and the 2nd time it Show this error Set myInDesign = CreateObject("InDesign.Application") Rem Set the user interaction level to allow the display
-
I have recently used CS2 in vista with no problems. After installing SP1, CS2 will not continue until I log in with proper credential, I'm the admin? Anyone else having these problems?
-
Unable to connect to iCloud server from iPhone
My contacts list has disappeared. I have tried logging into iCloud via my iPhone. When I attempt login it states unable to connect to server. Does anyone know how to fix