Transport the ztable
Hi,
How to transport the ztable from DEV TO QUALITY??
HELP ME. ITS URGENT.
REGARDS,
Hi Vijay,
When you create a ZTABLE it might ask you for reqest. Create the request number and then go to SE09 and you will see the request number there expand the request number you will see the task number. first you have to transport the task and then transport your request number. For transporting click on the request number in se09 you will see the small bus in the top just click it and it will transport your request number . but remember first you have to transport you task and then transport your request number.
Thanks
Vikranth Khimavath
Similar Messages
-
Transfer data in the Ztable from one client to another client in a same ser
Hi all,
How can i transfer or move data in the Ztable from one client to another client in a same server .
Thanks
Ajayhi,
create a transport request (Workbench type) and add the following line into the transport request:
R3TR TABU name_of_table
save and doubleclick this line and enter the table keys for the required entries (if you need all antries: client and an asterisk will do).
When it is done save again, release the transport and ask basis to import into target client (or you can do on your own in SCC1 transaction)
hope this helps
ec -
Error while transporting the Vendor in MM-SUS
HI
We are implementing SRM server 5.5 and follow a MM-sus scenario.
We were able to transport the vendor to SUS via BD14.
but now we are reciveing an error -
An error occured within an XI interface: Exception occurredE:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault>
Can some throw light on this error.
Previously when we transffered the vendor to SUS an user
was getting created in su01 which is not getting created.
2 When a vendor is transffered it creates a contact person "DO Not USE" why it that so ???
regards,
Nimish ShethHi,
Did you see the note 807812?
BR,
Disha.
Pls reward points for helpful answers. -
Error While Transporting the DSOs
Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSO, i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
The transport request contains just the DSO and not the Export datsource.I have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Can anyone please help me out with this problem.
Thanks,
Shalaka.Hai shalaka,
jus check some points in u r transportation.
check the collection mode,grouping option - whether it is in dataflow before and after ,in data flow after,or in data flow before ,might be u have selected the in data flow before ,so the datasource error is happening here
check the datasource is from the same sap system or non sap system ,might be the system is having the password .so these are the problems check out and let me know the status of it and if it is solved by other means let me know
Suri.. -
ALV Title Not Display after transporting the Programme from DeV to Qlty
Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
is_layout =gs_layout*
CHANGING
it_outtab = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM -
How to transport the BW query's variable to BO webi report
Hi all
I'd like to know how to transport the BW query's variable to BO 's webi . today ,I created a sap customer varible in my bw system to get the max calmonth in the active table.The varible in the BW side run's well ,but I use this query to build a new univers ,and created a new webi report base on this univers ,but the question is the webi report can't get the varible's value I wann to know how to transport the bw varible value to BO webi report
Thanks and regards,
Peter .zhuI have changed my variaable in my bw query ,I found if you use SAP default variable it is ok in BO side . So I get a guidline by SAP default variable ,I changed my customer variable in variables edite ,don't use 'ready for input' .And then the variable can be useful in BO side .
Edited by: peter zhu on Jun 16, 2008 11:43 AM -
How to delete the dat afrom the Ztable in GRP
Hello Experts,
How we can delete the data from the Ztable created by the developer , in the Production server ,please give a brief idea about it , thanks in advance.see this:
to delete data from z table
also follow this mentioned by jagadish in above thread:
start tr. se16n
type the table name and press ENTER.
Then type the string "&sap_edit" into the command line and strike Enter
again.
enter your selection criteria.
run.(F8)
now you can easily delete the lines you want (and then save)
All Changes are noted in the tables
SE16N_CD_DATA and
SE16N_CD_KEY. -
RC 8 error while transporting the query from Dev to Qa - Element missing
Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
Start of subsequent processing ... 20110517070025
End of subsequent processing... 20110517070045
Kind regards,Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you. -
Error while transporting the workflow object
Hi all,
Please be informed that while i transported the workflow changes to test system i encountered the sy-subrc 8 error as stated in below screen shots.Hi Ranjith
Seems that the transport error is showing that your ID has locked the Workflow (user REDDYRAN).
Can you do a syntax check of the workflow transported in this transport - in pftc and swdd? Do we get any error?
Also see if you can execute FM SWD_WFD_REPLICATE_FROM_9999 in Quality (in SM37) - provide the IM_TASK = WSxxxxxxxx (your workflow number).
regards,
Modak -
Error in Transport the info object
Dear all,
i am trying to transport the info object 0CM_CTAR
during transpot i am getting the error as
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
but i checked in development i not got any error but when i am trasport iam getting error.
Regards,
siva.HEllo,
Please see these OSS Notes
1139547 - Transport of InfoObjects RC = 8
1100575 - InfoObjects: Using units in compounding
The other way is to use a Z* object referenced to needed unit object in the compouding,
Regards,
Shashank -
Not able to transport the BI Content(Dev) to Production.
Hi Gurus,
<h6>I'm transporting BI Admin Cockpit to prod and its ending with errors.
I've successfully moved it to QA but while moving to Production it is ending with errors.</h6>
<h5>I'm trying to push the below listed objects:</h5>
<h6>0TCT_VC11 InfoCube</h6>
<h6>0TCT_IS11 InfoSources </h6>
<h6>0TCT_DS11 DW1CLNT500 Transfer_structure/Transfer_Rules</h6>
<h6>0TCT_DS11 DW1CLNT500 DataSources(3X)</h6>
<h6>ZPAK_4D8CABGMHNNDBZR20LDDZB07Y InfoPakage </h6>
<h5>Along with these I've collected all the objects which were being used in InfoSource/Communication_Struct.</h5>
<h5>After moving it to Prod it ended with below mentioned error:</h5>
<h6>Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)</h6>
<h6>DataSource 0TCT_DS11 does not exist in source system PW2CLNT100 of version A</h6>
<h6>Mapping between data source 0TCT_DS11 and source system PW2CLNT100 is inconsistent</h6>
<h6>DataSource 0TCT_DS11 does not exist in source system PW2CLNT100 of version A</h6>
<h6>P.S. The DataSource is not from R/3 its BI DataSource.</h6>
<h6>Kindly help me in transporting it to Prod.
Many thanks in advance.</h6>
Regards,
AkhilHi Srikanth,
Compare the transport request which imported in QA & PRD from dev then you can find .
If you transported the same request from DEV to QA & DEV to PRD then this might be possible.
because of mapping of source system.
if you have transported same req from DEV to QA & DEV to PRD then plz import that request from QA to PRD.
Please check mapping of source systems in TX: RSA13 in DEV & QA systems.
Hope this will help you.
Thanks,
Vijay. -
Getting the error while transporting the log file
Hi,
I have the primary and physical standby setup on my pc. i want to transport the log file by using the command on primary database
alter system archive current log;
alter system swicth archive logfile;
i am recieving error not able to find the log sequence 15 #.
Thanks
vj0011590OCI requires a native library.
Native libraries must be in the shared library path of the application (this is a feature of the OS not java.) -
While transporting the objects from dev to q or production what are the err
Hi all,
While transporting the objects from one system to another what are the errors we get?
Thanks
Kiran KumarHi Kiran,
The purpose of the Forums is to help people with problems, not to "fish" for answers to what appear to be interview questions. There are many ways to become educated in SAP Administration, such as training classes and help documetnation. Please choose these avenues for your questions instead of making these kind of posts in the Forums.
Best Regards,
Matt -
Error in transporting the Transformation to Quality system
Hi All,
I am trying to transport the transformation which has field level routine as well as start and end routine.
I have basically ehanced the standard routine and it works perfectly fine in dev server . I have even loaded the data and generated reports on this cube.
Now i am trying to transport it to Quality system. It throws up some "syntax error in routine" error. Very strange.
All my routine in Dev is working but during transport ther is some issue.
i saw some post on same but they are suggesting to regenerate a new transformation. For me this will be a nightmare as there are so many routnies at field level and as end routine.
Kindly suggest how can i rectify this error.
Note:- I had generated this transformation via old update rules with Migration function.
Thanks & Regards,
AnupHi Anindya,
Below is my source code for one field level routine in transformation.
FORM routine_0080
TABLES
p_monitor STRUCTURE rsmonitor
USING
COMM_STRUCTURE TYPE _ty_s_sc_1__rule_52
CHANGING
RESULT TYPE _ty_s_tg_1_full-srvclen
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
* init variables
* fill the internal table "MONITOR", to make monitor entries
DATA: ultimo LIKE sy-datum.
IF g_record_no <> RECORD_NO.
g_record_no = RECORD_NO.
CLEAR: employee_wa, person_wa.
CLEAR: employee_md, person_md.
ENDIF.
PERFORM read_md_employee
USING COMM_STRUCTURE-employee
COMM_STRUCTURE-calday
RECORD_NO
RECORD_ALL
SOURCE_SYSTEM
CHANGING employee_wa
RETURNCODE.
employee_md = employee_wa.
PERFORM calculate_ultimo
USING COMM_STRUCTURE-calday+0(6)
RECORD_NO
RECORD_ALL
SOURCE_SYSTEM
CHANGING ultimo
RETURNCODE.
IF NOT employee_md-entrydate IS INITIAL.
RESULT = ultimo+0(4) - employee_md-entrydate+0(4).
IF ultimo+4(4) LT employee_md-entrydate+4(4).
RESULT = RESULT - 1.
ENDIF.
ENDIF.
* result value of the routine
* if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
* if abort is not equal zero, the update process will be canceled
ABORT = 0.
p_monitor[] = MONITOR[].
CLEAR:
MONITOR[].
CLASS lcl_transform IMPLEMENTATION.
METHOD compute_0AGE_RANGE.
* IMPORTING
* request type rsrequest
* datapackid type rsdatapid
* SOURCE_FIELDS-CALDAY TYPE /BI0/OICALDAY
* SOURCE_FIELDS-EMPLOYEE TYPE /BI0/OIEMPLOYEE
* EXPORTING
* RESULT type _ty_s_TG_1-AGE_RANGE
DATA:
MONITOR_REC TYPE rsmonitor.
*$*$ begin of routine - insert your code only below this line *-*
Data:
COMM_STRUCTURE type _ty_s_SC_1__RULE_20,
l_subrc type sy-tabix,
l_abort type sy-tabix,
ls_monitor TYPE rsmonitor,
ls_monitor_recno TYPE rsmonitors.
data:
l_monitor type standard table of rsmonitor.
REFRESH:
MONITOR.
* Runtime attributs
SOURCE_SYSTEM = p_r_request->get_logsys( ).
MOVE-CORRESPONDING SOURCE_FIELDS to COMM_STRUCTURE.
* Migrated update rule call
Perform routine_0070
TABLES
l_monitor
USING
COMM_STRUCTURE
CHANGING
RESULT
l_subrc
l_abort.
*-- Convert Messages in Transformation format
LOOP AT l_monitor INTO ls_monitor.
move-CORRESPONDING ls_monitor to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
IF l_subrc <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
ENDIF.
IF l_abort <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
ENDIF.
I am not able to change the code which are marked with " * ". Where can i change the code here?
Regards,
Anup -
OBJECT SKIPPED while transporting the objects from DEV to QA.
Hi All,
While transporting the objects to Quality, I'm getting a warning saying Objects are skipped.
Can anyone please explain how to get rid of this error? We are facing this issue almost for all the transports which we are moving and the objects do not get transported to the next environment. We have to ask BASIS to use overwrite functionality while transporting to fix this each and every time we face an error.
If any SAP notes are available then please share it to me.
Thanks in Advance.Hi Srikanth,
Objects of the selected object types exist in your system as changeable even if this system is globally set to not changeable. As a result, these objects are no longer connected to the transport system.
check here........
http://help.sap.com/saphelp_nw04/helpdata/en/0e/a7343e8c7f6329e10000000a114084/content.htm
for this try contact basis team.
Thanks,
Vijay.
Maybe you are looking for
-
Special stock Indicator in process order
Hi Guys, I am using Configurable material via BOM dependency. During sales order pop-up and selection are coming well. I have selected Component A1, B2, C2 with characteristic value. Now B2 and C2 have procurement type "F" and for A1 procurement type
-
Updated to 10.4.11, now programs don't work
Hello, I recently upgraded to 10.4.11, and now Microsoft Word immediately closes when I try to open it. It says "Microsoft Word encountered a problem and needs to close." I have tried restarting the computer, to no avail. I would re-install Word, but
-
How do I see the frequency of a point in spectral frequency display
Hi all, I have recently tried out Au 6 (I use Au 3 at the moment), and though I very much like almost everything so far, there is one HUGE problem...how do I see the frequency of a point under the cursor? In Au 3 this appeared in the status bar, but
-
Keynote can't open iCloud files
When I try to open some files, which I've uploaded to iCloud before, Keynote fails to do so with this error: Can't open file "ASSN(Nov2011)". I also found the local copies of these files at ~/Library/Mobile Documents/com~apple~Keynote/Documents/. Whe
-
Native methods inside C++ class
Hey all, Tried posting this already but it didn't appear in the forums. So apologies if this appears twice on same forum :o) Want to wrap my native methods inside a C++ class but get UnsatisfiedLinkerError when I do. Is it possible to do this? Do I h