Transport $TMP package

Hi Experts!
I have my bw-customizing on R/3 in a $TMP package (this have all, MM, PP, FI, ...) Now I need transport this to R/3-QA.
I will create a new request with SE21, then..
a) in SE21what must I complete as 'Application Component' and 'Software Component'?
b) How can I move from $TMP to the new package?
Thank you in advance!

hi ssap,
check the foll links,
Wonder if a $TMP package object can be transported?
Change $TMP package from EEWB
hope it helps,
raghu.

Similar Messages

Transport of package

hi
i need to transport package also from bi dev to bi quality?
i am trying delete some thing from quality, getting ZBI package is not exist?
in BI 7.0 if i transport dtp, its not overwriting?
what can i do?

Hi,
What are you trying to delete??
In most cases you will have only creation or change authorization for the objects like DTP or infopackage but not for delete and thats why it will be giving you an error.
I think instead of deleting it...let it be there and create a new one.
Regarding package...everty object should go inside a package and its not mandatory to transport the package first before the objects...
If you transport the object...packages will move automatically....
Thanks
Ajeet

How to transport a package(dev class) to another system?

dear gurus,
is it possible to transport a package (development class) from one system to anther system mannully? there is no transport path between the two systems.
best regards.
Jun

Hello Jun
The "correct" way would be to create a transport request of type Relocation of Complete Package (SE10):
DE ORDER_MVE
Short Text
 Select relocation of a complete package
Definition
 Relocations of complete packages are transports with which you
 simultaneously
 o move the original location of all objects in a package to the target
 system and
 o simultaneously assign the package to another transport layer.
Use
 Changing the transport layer means that you can edit and transport the
 objects consistently in their new original location without delay.
However, I assume that this is not possible in your system landscape. In this case you can download the transport files using transaction CG3Y (if available => download as BIN not ASC) yourself. A transport request E01K900100 consists of two files (data and log file), e.g.:
/usr/sap/trans/data/R900100.E01
/usr/sap/trans/cofiles/K900100.E01
Please note that the transport directory is likely to be different on your SAP system (check for directory DIR_TRANS in AL11 or ask your basis colleagues).
Now on your target system you either upload the files into the corresponding transport directories using CG3Z (if available) or ask your basis people to put the files into the directories. Either your basis is importing the request or you can use transaction STMS (Import queue <target system>, menu Extras -> Other Requests -> Add).
Add the request to the import queue and import it.
Finally you need to change the original system of the transported object and the transport layer of the package:
1) SE03 -> Change Object Directory Entries of Objects in Request
2) SE80 -> Package in Change Modus: maintain transport layer
Regards
Uwe

$tmp package for ABAP proxy

I am trying to invoke ABAP Client proxy. Can I use $TMP package or do I need to specify a different package?
Also if local package is allowed, do I need to set up USE Access?

Looked at the blog and the link posted. I wasn't able to find out If I need to do 'USE Access' for $tmp package?

Reg: How to Create Enhancement spot in $TMP Package

Hi All,
i had seen so many eLearning concepts which sap provided to demonstrate the ENHANCEMENTS Topic,But in that they are using the Enhancement Spots which already created in $TMP Package,So To learn this concept i am trying to create the Enhancement Spots in $TMP , But it is not allowing me to create in $TMP and it's showing the error message like Enhancements can create in only 'SAP' Packages only,So if i will create in SAP Packages it is allowing,
But i would like to create Enhancement Spots in $TMP Package,So it would be appriciable any one could help me regarding this.
Thanks in Advance
Srihasa...

Thanks Rasheed for your quick response, i tried from the SE 38 To create Enhancement Spots in the $TMP Package,But it's not allowed me,Can you tell the way how to create the Enhancement Spots in the $TMP Package i mean is there any other Tcodes are available to create the Enhancement Spots.
Thank you..
Srihasa

How to transport the package back

How do I transport my package back after I have already transported it to the higher level. I mean to ask that if I hv to do some modification to my package den how do I get it back from the testing department. and wt procedures I have to follow in order to get it back.

Hi
What do you mean by getting back the package to DEV
Is it request or packagae
if you define a packagae in DEV under some request, though you transport that packagae will be there in DEV
I think it is the Request Once you release and transport the request you can't get back the contenets of it back
You have to create a new request with objects and to transport again.
Regards
anji

Transporting a package

can any one tell me how to transport a package , also how to identify the request no for a particular package

1) You can transport a package by going to SE80.
In the first dropdown select 'Package' and enter the package name in the input field below this. Select 'Display'. Now right click on the root of the tree structure, this should be your package name, and select 'Write transport entry' from the context menu.
2) To see the transport number to which the package has been written go to transaction SE03 Select a check box for object selection and enter 'DEVC' in the object type input field (the second field in the selected row). Now enter the package name in the 3rd input field in selected row. Make sure that the Status 'Modifiable' and/or 'Released' is ticked (dependent of status of transport).
Now select execute.

HELP! Boot up Error.. %IOSXEBOOT-4-ABORT: (rp/0): Package provisioning file {/tmp/packages.conf} does not exist.

Hi Cisco Support Community,
I have a problem with my Cisco 3850, it does not load completely
Does any one encountered these error? please do help
Here is the logs:
Booting...Initializing and Testing RAM ++++@@@@####...################################++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@done.
Memory Test Pass!
Base ethernet MAC Address: 7c:95:f3:64:26:00
Interface GE 0 link down***ERROR: PHY link is down
Initializing Flash...
flashfs[7]: 0 files, 1 directories
flashfs[7]: 0 orphaned files, 0 orphaned directories
flashfs[7]: Total bytes: 6784000
flashfs[7]: Bytes used: 1024
flashfs[7]: Bytes available: 6782976
flashfs[7]: flashfs fsck took 1 seconds....done Initializing Flash.
Getting rest of image
Reading full image into memory....done
Reading full base package into memory...: done = 79121160
Nova Bundle Image
Kernel Address : 0x6042d350
Kernel Size : 0x402ecf/4206287
Initramfs Address : 0x60830220
Initramfs Size : 0xdb98e6/14391526
Compression Format: .mzip
Bootable image at @ ram:0x6042d350
Bootable image segment 0 address range [0x81100000, 0x82110000] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 380
Loading Linux kernel with entry point 0x81653a10 ...
Bootloader: Done loading app on core_mask: 0xf
### Launching Linux Kernel (flags = 0x5)
ata1.00: failed to set xfermode (err_mask=0x100)
ata1.00: failed to set xfermode (err_mask=0x100)
ata1.00: failed to set xfermode (err_mask=0x100)
%IOSXEBOOT-4-ABORT: (rp/0): Package provisioning file {/tmp/packages.conf} does not exist.
%IOSXEBOOT-4-ABORT: (rp/0): Package provisioning file {/tmp/packages.conf} does not exist.

Download the ver you want to use onto a flash drive, then use it to load the ios, after it loads you can copy the ios to flash.
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/deployment_guide_c07-727067.html

Wonder if a $TMP package object can be transported?

In Transport Connection, we drag over an ODS to the right frame grouped by "In Dataflow Before". Even if the package assigned to this ODS is not $TMP, but one update rule under this ODS in this frame is assigned to $TMP. If we check this update rule object to be transported, then the transport will work or not if it's assigned to $TMP, but it's upper level ODS is assigned to a Z package?
Thanks

Kevin,
No,
If it is a sandbox system, u can use $TMP, if its a development system, use a package structure. B'cos only objects assigned to package structures can be transported from developement to Production.
You can use $tmp as pkg for your proxies.
Let me know if you need any further clarifictions.
Thanks
Ramu
Message was edited by: Pidugu Ramu

Transport-changing package owner

Hi Gurus,
I am facing an issue in BW system. After changing transport layer for particular package , Request is going into corrections and repairs. Since this is not the original system for the object, also it was prompting for local workbench request only.
To eliminate this problem i used TRANSPORT OF COPIES through which you can transport the objects belonging to some other system.
But after changing the transport layer, i am getting the following problem. It will be of great help if anyone can tell me the reason behind the below issue.
       ABCK904251      XYZ      PACKAGE TRANSPORT LAYER CHANGE ( 12.02.2011 )
       ABCK904252   123      Development/Correction
       ABCK904253    123      Repair
Also how we can change the owner of a package.?? it seems that somehow they all are interelated.
Please reply,
Thanks N regards,
Alok

Hi,
Suppose your having 2 system landscapes
One Landscape   -> SD1   ST2 SP3 , Here your having RD3 as Transport Layer name
Another Landscape -> SYD1   SYT2   SYP3, Here your having RD2 as Transport Layer name.
Now you have moved some objects from SD1 and SYD1.
Now when you check the package of those objects in SYD1, the Transport Layer name will show as RD3 in SYD1.
Here in SYD1 actual Transport Layer name is RD2. So you have to chage the Tranpsort Layer name for that package which you have imported from SD1 to SYD1.
Once you import to the SYD1 from SD1, In SYD1 change the Transport Layer in SE80 t-code.
You can't change the Owner of the name, but when you chage that object latest modified by will be your name.
Regards,
Shankar.

Transport and package creation

Hello SAP Masters,
I am looking for some details guideline about package creation and sap crm transport layer. I mean how to create different packages and how to transport from one server to another.
Looking for your reply.
Thanks and Regards
Rahul

Hi Rahul,
would recommend the following help links: http://help.sap.com/saphelp_nw70/helpdata/en/57/38ddb14eb711d182bf0000e829fbfe/content.htm
and http://help.sap.com/saphelp_nw70/helpdata/en/af/40bd38652c8c42e10000009b38f8cf/content.htm
Best Regards,
Michael

Transport of package links in BPC NW 10.0

Hello Experts,
I have observed something strange that not all package links seem to be transporting to target system.
Though i have collected 6 package links through RSA1 granular transport methodology ... i see only 2 have been imported into Q.
I could see the elements in the transport request, howver when imported only two package links were imported and others were missing.
did any one notice such behavior? or am i missing something?
Thanks.

any thoughts folks?
has any one seen this before?

Transporting a Package from one client to anothr

Hi,
I Would like to transport all the objects in one client that i have to another client.

Hi,
Use transaction : SE03
Step 1:
Double click the "Include Objects in a Transport Request"
Step 2:
Enter the package name and select "all objects" radio button
Step 3:
Execute and save in a request.

Import GP Local Transport Request Package

Hi, SDN Expert.
I am trying to move my GP Process from one system to another system.
I have create the transport package in sda format in to my local drive through "GP Transport" --> "Create transport request". When I tried to import the transport package through "GP Transport" --> "Import transport request". The only option for me to import the package is through End Point Alias. I do not have the End Point Alias setup, as I plan to import the transport package locally.
My question is what is the right channel to import the sda package that I have exported? Is that through "GP Transport" --> "Import transport request" (but I don't see that option to import sda). Or I can use SDM tool to do so?
Thanks,
KC

Hello,
if you are using netweaver 7.0 :
After exporting there is an option "download sca file", click there , download it to your pc and then you will have to use SDM to upload it in the destination system.
Then you have to release the transported objects:
After uploading it, log in into the destination system , go to guided procedures -> administration -> Import transport requests --> go to the process you transported and select it so you can release it for use.
Regards,
Marco.

Transporting Info package

Hi
I'm trying to add info package into transport request but I'm not finding the way how to add this. If we transport cube/info- object we can go to extra and click Object Directory entry and change local package into our package . Other way is Go to directly Transport and then select what we want to transport and find object and then we can collect in transport request.
In info-object as I couldn't see Object directory entry under extra and I couldn't find this info-package in TRANSPORT Tab.
Please can you suggest what I'm missing as I've tried these steps 3-4 times but doesn't seem anything is missing.
Thanks

please close your discussion by taking below blog help.
How to close a discussion and why

Transport $TMP package

Similar Messages

Maybe you are looking for