Transport user error: invalid object name while starting CMS in CCM
Hi Experts,
I'm not able to start the CMS in CCM.It was working fine. Suddenly it went down due to some data base access failure. After that Iu2019m not able to start the CMS.
Kindly find the event viewer error and information.
Error: The root server reported an error Initialization Failure.
Error: Failed to register object.. Reason: Transport user error: invalid object name..
Information: Central Management Server stopped
Could you please tell me how to start the CMS in CCM? Since I can able to setup CMS Database and audit database successfully.
Regards,
Sridharan
Hi ,
Thanks for the response.I have trace the CMS.I found some error in log file.any idea on the following errors,
trace message: CNSClientManager::VerifyConnection() : search fails(37) - Transport user error: object with the specified name not found.
trace message: CNSClientManager::VerifyConnection() : Failed to query for APSs. Empty cluster list returned.
trace message: TheAPSServer::RegisterApsInNameServer: Fail to register the current APS(Transport user error: invalid object name.)
trace message: CNSClientManager::ClusterInfo::InvalidateAPS: Removing APS from m_ActiveMembers and adding to m_InactiveMembers
trace message: SIServerController:run: Fail to initialize or uninitialize. Reason is The root server reported an error Initialization Failure.:
Regards,
Sridharan
Similar Messages
-
Why its showing error : Invalid Object Name 'table name' when we try to insert data ?
Hi,
When i try to insert data in the database with the following query
con.Open();
cmd = new SqlCommand("insert into good(ID,Name) values('" + textBox1.Text + "','" + textBox2.Text + "')", con);
cmd.ExecuteNonQuery();
MessageBox.Show("Insert success");
con.Close();
its showing following error Invalid Object Name 'good'Use 3-part naming like: MyDatabase.dbo.good(ID,Name) .
Also consider using stored procedure for database INSERTs.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
Why do I get "Error 1 occured at Config Data Registry.vi(get data) invalid object 0" when starting my application created in LabVIEW 7.1? I am starting the application in a PXI rack running Windows XP. I have an executable written in LabVIEW 7.0 that runs without this error. After clicking the Continue button in the error, the application seems to continue happily.
Is there something I need to include when I make the executable?
I would like to understand and eliminate this start up error.
Thanks in advance.
BobNorthHi Bob,
I looked through the program and I figured out where the error is coming from, and potentially what is causing it. In a lot of the cases of the program you are searching a 1-D array for the name of the case, and if you don't find it then it skips the function and gives "Error 1 occurred at Config Data Registry.vi(CASENAME) invalid object 0". I attached a screenshot that shows what I mean. The Search 1-D Array.vi is returning a -1 which means it didn't find the case. The reason I believe this is happening is because the shift register for that array is not initialized. While the other cases "reset" and "register" interact with the array shift registers and most likely create the array you need, if the program defaults to the "get data" case then it will try to run that before registering and won't have an array to search. This would also explain why it only has this problem at first and seems to run just fine after that. To fix this you should either make an initial array and wire it into the shift register or make the "reset" case the default as opposed to the "get data" case.
Regards,
Peter W.
Attachments:
Config Data Registry.png 55 KB -
Report error, Invalid object name 'v_lu_cpu'
Hi
I have a report that I have imported from another SCCM server that has it working. I have changed the datasources after the import but when I try to run the report I get this error message:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DataSet0'. (rsErrorExecutingCommand)
Invalid object name 'v_lu_cpu'.
Does anybody know what this means?Ok, then I understand.
I'm not that good at reporting so if anybody can help out with replacing the code that uses v_lu_cpu with
something else, it would be very kind. Thank you
SELECT DISTINCT
v_r_system.netbios_name0 AS "Computer Name",
v_r_system.Description0 AS "Description",
v_gs_system_console_usage.topconsoleuser0 AS "Top Console User",
v_GS_PC_BIOS.serialnumber0 AS "PC Bios Serial Number",
v_gs_computer_system.manufacturer0 AS "Computer Manufacturer",
v_gs_computer_system.model0 AS "Computer Model",
CASE
WHEN v_gs_computer_system.manufacturer0 LIKE 'Dell%'
THEN 'http://support.dell.com/support/topics/global.aspx/support/my_systems_info/details?servicetag=' + v_gs_system_enclosure.serialnumber0
WHEN v_gs_computer_system.manufacturer0 LIKE 'Hewlett%'
THEN 'http://h20000.www2.hp.com/bizsupport/TechSupport/WarrantyResults.jsp?sn=' + v_gs_system_enclosure.serialnumber0 + '&country=US'
WHEN v_gs_computer_system.manufacturer0 LIKE 'HP%'
THEN 'http://h20000.www2.hp.com/bizsupport/TechSupport/WarrantyResults.jsp?sn=' + v_gs_system_enclosure.serialnumber0 + '&country=US'
ELSE '(Not available)'
END AS "Warranty Information"
FROM v_gs_processor
INNER JOIN v_r_system
ON v_gs_processor.resourceid = v_r_system.resourceid
INNER JOIN v_gs_system_enclosure
ON v_gs_system_enclosure.resourceid = v_r_system.resourceid
INNER JOIN v_GS_PC_BIOS
ON v_GS_PC_BIOS.resourceid = v_r_system.resourceid
INNER JOIN v_gs_computer_system
ON (v_gs_computer_system.resourceid = v_r_system.resourceid)
LEFT JOIN v_gs_system_console_usage
ON v_gs_system_console_usage.resourceid = v_r_system.resourceid
LEFT JOIN v_lu_cpu
ON Lower(v_lu_cpu.cpuhash) = Lower(v_gs_processor.cpuhash0)
WHERE v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 <> 12
AND
v_gs_computer_system.manufacturer0 NOT LIKE 'VMware%'
AND
v_gs_computer_system.model0 NOT LIKE 'Virtual Machine'
AND
v_R_System.Operating_System_Name_and0 LIKE 'Microsoft Windows NT Workstation%' -
Sender CC for MS SQL 2005 Driver error invalid object name
Hello people,
can some one help me with the following problem?
I'm trying to implement a JDBC to IDoc XI/PI scenario with PI 7.1.
In RWB CC monitor i'm getting the following error : "Database-level error reported by JDBC driver while executing statement 'SELECT * FROM SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'SAP_SALES_TRANS_PAYMENTS'.'. For details, contact your database server vendor".
Communication channel configuration:
JDBC Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
Connection: jdbc:sqlserver://<IP>:1433;databaseName=<DB Name>
Query SQL Statement is : "SELECT * FROM SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0'"
Update SQL Statement: "UPDATE SAP_SALES_TRANS_PAYMENTS SET TRANSFERRED_FLAG='1' WHERE TRANSFERRED_FLAG='0'"
The name of the database is 'SAP_SALES_TRANS_PAYMENTS', is checked. Are the table name and/or table fields names key sensitive?
The MT definition is identical with the data base table.
Thanks StefanosHello,
this issue is solved now.
The problem was in the name of the database table. The Database was created for more then one
company codes (by an other partner company ) and the full/right name in the query is
SELECT * FROM dbo.<company_code>$SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0'
Best regards
Stefanos -
Script logic error - Invalid object name 'tblStatus'
Hi all,
Running BPC 5.1 SP5 on SQL 2005.
Has anyone ever seen this error message before? I only get the error message when choosing the run-time option in the package, to honor work status settings. This problem just appeared in the last few days, and I believe that a month or two ago, users were running the same logic (with the same yes-honor-work-status option selected).
We did recently upgrade from 5.1 SP3 to 5.1 SP5, and I'm wondering if this may be a cause? That's just a hypothesis though.
Invalid object name 'tblStatus'. in:
select distinct d.VERSION,d.ENTITY,d.TIMEID
from #RESULT_333729 d where signeddata<>0
and exists (select * from tblStatus s where [APP]='CONSOL' and d.VERSION=s.CATEGORY and d.ENTITY=s.ENTITY and d.TIMEID=s.TIME and [STATUS]>0)
I understand what it means, and of course there is no table in the appset database tblStatus. Work status locks are kept in tblConsolLock (where Consol is my app name). And in that table, the field name is StatusCode, not Status. So it appears that this is some vestige of code from an earlier version of BPC / O'soft.
This error occurs in a piece of script logic, that includes both basic SQL WHEN/IS/*REC's and also a *RUNALLOCATION. The error is thrown within the RUNALLOCATION code block. The complete run-up to the error message is shown below.
-- Calculate difference
insert into #DIFF_333729 ([ACCOUNT],[AFFILIATE],[CURRENCY],[DATASRC],[ENTITY],[PRODHIER],[TIMEID],[VERSION],signeddata)
select [ACCOUNT],[AFFILIATE],[CURRENCY],[DATASRC],[ENTITY],[PRODHIER],[TIMEID],[VERSION],amtWHERE as signeddata
from #WHERE2_333729
select [ACCOUNT],[AFFILIATE],[CURRENCY],[DATASRC],[ENTITY],[PRODHIER],[TIMEID],[VERSION],sum(signeddata) as signeddata
into #RESULT_333729 from #DIFF_333729
group by [ACCOUNT],[AFFILIATE],[CURRENCY],[DATASRC],[ENTITY],[PRODHIER],[TIMEID],[VERSION]
--Time to calculate and count differences (45459 found):2.5 sec.
select distinct d.VERSION,d.ENTITY,d.TIMEID
from #RESULT_333729 d where signeddata<>0
and exists (select * from tblStatus s where [APP]='CONSOL' and d.VERSION=s.CATEGORY and d.ENTITY=s.ENTITY and d.TIMEID=s.TIME and [STATUS]>0)
call 1 completed and data posted in 23.6 sec.
Run completed in 23.7 sec.
End time --->11:01:05 AM - Date:1/16/2009
Invalid object name 'tblStatus'. in:
select distinct d.VERSION,d.ENTITY,d.TIMEID
from #RESULT_333729 d where signeddata<>0
and exists (select * from tblStatus s where [APP]='CONSOL' and d.VERSION=s.CATEGORY and d.ENTITY=s.ENTITY and d.TIMEID=s.TIME and [STATUS]>0)
Here is the original script logic (from the LGX file -- the LGF file has a whole bunch of variables in it that would only confuse the matter more). It works just fine when the
*RUN_ALLOCATION @A_1||
USING/TOTAL|
ACCOUNT WHAT=659210,659310,659320,659410,659510,659610,659620,659630,659710,659810,659820,659910; WHERE=<<<; USING=PCAYTD510000; TOTAL=<<<|
PRODHIER WHAT=PRODHIERL1A;WHERE=[PRODHIERLEVEL]='5'; USING=<<<; TOTAL=<<<|
DATASRC WHAT=PCAASSESSSTAGE1,PCAASSESSSTAGE2; WHERE=PCAASSESSALLOC1; USING=INPUTCONSOL; TOTAL=<<<|
ENTITY WHAT=[COMPANYCODE]='7470' AND [PCAASSESSDRIVERBP]='PCAYTD510000' AND
([PCAASSESSMETHODBP] = 'ALLOCAUTO' OR [PCAASSESSMETHODBP] = 'ALLOCMANUAL');WHERE=<<<;USING=7470.BASE;TOTAL=<<<|
Anyone experience this same error message? I searched for SAP support notes and found nothing to do with tblStatus or similar.
Thanks for your help,
TimHi Sorin,
Thanks, you've confirmed what I suspected.
Yes, we always process & save apps & dims on any upgrade.
We've reproduced the problem in all 3 of the environments with the customer's appset. I haven't yet reproduced in ApShell, but will do so & report it as a bug.
And just out of curiousity -- was the other message you saw here in this EPM forum? Before I posted my question, I searched both here, and in the support notes, for "tblStatus" and a few other terms about work status lock errors, etc., and came up with 0 results.
Thanks again,
Tim -
Error Invalid object name 'mbrGROUPS'.
I'm attempting to validate the standard elimination logic for Intercompany eliminations. I'm getting the following error when I try to validate:
Invalid object name 'mbrGROUPS'. in:select [ID] from mbrGROUPS where [REPORTING] = 'Y'
Below is my logic for this. I'm trying to use this logic for a Legal consolidations application.
//=============================================
// Default Intercompany Eliminations
//=============================================
*INCLUDE SYSTEM_CONSTANTS.LGL
*SYSLIB ICELIMWITHCURR.LGL
//=============================================
// Elimination logic for three organization(H1, H2, H3)
//=============================================
INITIALIZE_ELIM()
ELIMINATE_ORG(H1)
ELIMINATE_ORG(H2)
ELIMINATE_ORG(H3)
*COMMITI fixed this myself. I forgot to change the "CURRENCYDIM" in the ICElimWithCurr file to my Reporting Currency, which in this case is "ConsolView"
Logic can be so humbling sometimes. -
Err. Invalid Object name 'tblStatus'
Hi Expers,
While i run an allocation in
BPC i am getting an error
"Invalid object name 'tblStatus' in.
In the script i have used the stored procedure
and through that i have updating the tblfactwbappl
table. Whether this is the cause of this issue.
Please help me on this.
Regards & Thanks
Baijuchandran.BHi baijuchandran b,
Please refer to the SAP Note below and see if this might help you resolve your issue:
Note 1330760 - Work status in Allocation logic
Summary
Symptom
User may get an error message "Invalid object tblStatus" when running allocation logic.
Other terms
BPC 70M SP4 Microsoft, Allocation, Work status, IM 158009 2009
Reason and Prerequisites
"Allocation engine" may try to find the old table which was used for checking work status. But the table is not used any more from version 5. So the work status checking process fails with the error.
Internally, the features in work status checking process were changed (work status dimension, database table, ownership related to manager and owner) from version 5. But these features were not applied to the "Allocation engine" in logic.
Solution
The work status features are applied to the "Allocation engine" in logic.
This issue is resolved in 70M SP4.
Cheers^^,
Marvin -
Hi .
I was creating the pass the values t in temp tables though s sis package vs2012 .
First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
exec USP_GETMP02333
go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
[Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help meArthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon. -
SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Error in Upgrade--Invalid object name 'SVERS'.
i am in the process of upgrading a NW2004 system to Nw2004s
i am getting the following error in MSSCONCHECK phase
pls help
Msg 208, Level 16, State 1, Server HYDHTC74451, Line 1
Invalid object name 'SVERS'.
I am using MS SQL Server as back end. but i am gettign the following message in MSSCONCHECK.OUT file
ORACLE_HOME=D:\oracle\...\bin
Message was edited by:
Balaji Rya, i installed oracle . I removed the environment variables.
But now i still i have the problem
I login to Windows as <sid>adm and start the prepare it could not execute the program
<b>setuser '<sid>'
select VERSION from SVERS
go</b>
I also logged into sql and executed it . IT is giving the error
<b>SETUSEr permission denied</b>
I am having Datbase administrator Access to <SID>adm
Pls help -
I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
error.
· An error has occurred during report processing.
(rsProcessingAborted)
Query execution failed for dataset 'dataSet'.
(rsErrorExecutingCommand
Semantic query execution failed. Invalid object name
'RPT. ******'. (rsSemanticQueryEngineError)
****** - I am assuming this is a custom data class.
Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.Hi Kishore237,
According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
I am getting following error in each module of SAP B1 9.0 and hence unable to use SAP b'coz I can't add or change any document b'coz of this error.
Error : [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'UNKNOW ERROR'. (CINF)
please help me to resolve this issue.I am getting following error in each module of SAP B1 9.0 and hence unable to use SAP b'coz I can't add or change any document b'coz of this error.
Error : [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'UNKNOW ERROR'. (CINF)
please help me to resolve this issue. -
Hello,
When trying to perform an Upgrade of a BW3.0B to BW3.5, Prepare Phase, an error occurs in script MSSCONCHECK.SQL.
- Msg 208, Level 16, State 1, Server SRVDW, Line 1
Invalid object name 'SVERS'.
Can anyone help?
Thank you.
Regards,
PTI have similar eror message during upgrade from ECC 5.0 to ECC 6.0 on MS SQL 2005. The output from my sapup is as shown below:
>> 07:39:34 PREPARE: START OF PHASE INITPUT_PRE
Supply the following information:
Confirm the name of your SAP system: [AWD]
SAP SYSTEM ID =
The hostname of your central SAP server: [SERVER01]
SAP SYSTEM HOST =
Enter the SAP instance number: [02]
INSTANCE NUMBER =
The system identifier of your database: [AWD]
DATABASE ID =
The hostname of your database server: [SERVER01]
DATABASE HOST =
Executing script MSSCONCHECK ...
MSSCONCHECK: Connection check failed for the user specified
SAPup message
SAPup> Errors were found in the logfile MSSCONCHECK.LOG
after execution of the script MSSCONCHECK.SQL.
SAPup> SAPup cannot proceed until these errors are fixed.
Please, examine MSSCONCHECK.LOG, fix reported errors and then call R3
gain
- "continue"
- "cancel"
Enter one of these options [continue] :=
SAPup message
SAPup> SQL-scripts must be executed by the NT user account SERVER01\awdadm.
Check your installation of the integrated security procedure
on host SERVER01 and make sure that a login for the NT user
SERVER01\awdadm exists with the following rules:
- user SERVER01\awdadm owns the role System Administrators
- user SERVER01\awdadm has the default database AWD
SAPup> Integrated security installed correctly?
- "no"
- "yes"
Enter one of these options [no] := yes
Executing script MSSCONCHECK ...
I'm currently running both Solution Manager 4.0 and mySAP ERP 2004 SR1 on the same box in Development environment.
Has anyone gotten a breakthrough on this error messages? Mode set to both SQL and Windows Authentication, can do selct * from SVERS for solution manager database but not for ECC 5.0.
Urgent!!!! -
ExecuteBaseLogic::Invalid object name 'tblStatus' when submitting data
Hi experts,
I've encounter the following error while submitting data via input schedule:
ExecuteBaseLogic::Invalid object name 'tblStatus' in: select distince d.CATEGORY,d.ENTITY,d.TIMEID from #RESULT_334020 d where signeddata<>0 and exists [select * from tblstatus s where [APP]='TIS' and d.CATEGORY=s.CATEGORY and d.ENTITY=s.ENTITY and d.TIMEID=s.TIMEID and [Status]>0).
I did not find any OSS notes on this and not sure what is the problem. Appreciate your advise on this issue.
Thanks!Hi!
I have encountered the same problem as you have when starting an SSIS package with the setting: "Check for work status settings". According to SAP in BPC 5 SP 6 this setting must not be chosen.
I guess, that this setting is somehow passed to your default logic. So, you can try the following:
In BPC for Excel go to eData / Organize Package List; choose the company folder and in this the System Administration group. Select "Default Formulas" and click the edit button (a sheet with a pencil). In the pop-up box click the edit button next to the field with the file name (that's a sheet with a magnifying glass). In the new pop-up box click "Advanced". Put an apostrophe (') before the prompt for %CHECKLCK% and replace
TASK(Execute formulas,CHECKLCK,%CHECKLCK%)
with
TASK(Execute formulas,CHECKLCK,0)
Then try again. Maybe, this works.
Best regards,
Hartmut
Edited by: Hartmut Kesper on Feb 9, 2009 2:45 PM
Maybe you are looking for
-
I recently bought a video out to s-video adapter from Apple , when connected my screen resolution is altered and cannot be set to its usual setting . The brightness adjustment appears disabled in some games and my VCR connected to the other end of th
-
Entering Invoices for an EXPIRED Blanket PO
Hi All, Howcome the system lets me enter Invoices for an expired Blanket PO (when the Validity End date has passed) but there is a remaining amount in the overall limit (for example, out of 1,000 USD limit....Invoices upto only 700USD entered....so 3
-
Hey Guys, please let me know if anyone of you faced such problem when buying the Muse program. Thanks in advance.
-
D-Link DBT-122, problem with Apple fimware updater
Few days ago,I bought a D-Link DBT-122 usb bluetooth adapter (the new model of dbt-120 and the "only" actual model of the D-Link) to connect my BT headset JABRA with my mac-mini, but even if the OS system find the usb BT adapter, it not permit the pa
-
Smartform Dumping..Please help....
Hi Guys, I am developing a new smartform for the PO in MM(AFS ). I know, I am putting too much stuff inside an item loop (item, vas, sizes, HTS, texts etc, putting more than 30 templates and 20 more required). Do we have any chance to avoid this dump