Transport user exit frm development to production server.

HI Gurus!
please tell me how to transport user exit frm development to production server.
Points Sure!
Regard,
Rahul .

Hi Rahul,
You have to create a project in CMOD transaction you can use the avialable one also.
after that attach your userexit to that Project.
The function modules which are used in that userexit must be activated.
Then transport the request with the help of basis Person.
Reward points if u find this suggestion helpful.
Thanks and Regards,
Yuvaraj

Similar Messages

Transporting User exits

How to transport user-exits from Development to Quality and then finally to Production server in version ECC 5.0.
Please note that its User exits I want to transfer and not Customer Exits.

Hi harshu,
1. From user exits (and not customer exits)
what i understand is that you have written a code
in a standard include eg. for SD one of the include is
MV45AFZ4
2. In this case, we have to take the access key
for changing the standard include. Only then can we change it.
After access key, when we try to modify the code,
the system will automatically ask for request number.
This request number can be used to transport it to QA and PRD.
regards,
amit m.

Query related to request transfer from development to production server.

Hello,
I am transfering request from development to production server , the error occured is object REPT of particular program is inactive.
What is this error ?
Plz give answer as early as possible .
Thanks in advance.
Vikram.

Did You try my solution'
Hi..,
go to the request in SE09...
in the menu
Request/Task->Complete Check-> Display Inactive objects..
you will get the objects which are inactive and u can active them there itself.
santhosh

Transporting object from development to production server

Hi Everyone,
Could you plz tell me how can i transport a object from development server to production serevr if that object is local in production server. And also could u tell me if the transfer structure is replaced if the names are different in both the server???

Could you plz tell me how can i transport a object from development server to production serevr if that object is local in production server.
Case 1: Object is in Prod, but not in Dev. and you want to align the systems through transports.
You will have to send it to D (which could be done by changing transport routes & then following normal transport procedure) & then will have to bring it back with overwrite originals.
Case 2: Object is present both in Prod & Dev.
You can send the transports D->P with Overwrite originals (following the transport procedures).
And also could u tell me if the transfer structure is replaced if the names are different in both the server???
If technical names are different in both the servers, the transfer structure will not be overwritten.

How to transport requests from development to production server

hi gurus
i am new to SDN
can u pls give me detailed information how to transport requests from development server to production server?if possible give me screen shot documents
regards
surya

Hi
Transporting
There are help pages that discuss creation of transports.
In simple terms, you: create a transport package
add objects to the package export the package, plus optionally any related objects to a predefined folder/directory on the portal server into a file with an extension of .EPA copy the .EPA file to the import folder of your QA system and import it test the contents on the QA system copy the .EPA file to the import folder of your production system and import it Create a transport package file
Here is the step by step procedure to create a transport package:
For Export
1. Go to system administration, and click on transport?export.
2. In the middle pane, select the folder you want to export and right click on the Transport Package. 3. Fill in the General Properties i.e the name of the package, id and description. 4. And say finish and open the object for editing.
5. When the object has been opened then right click on the object you want to transport, and say "Add object to the Transport Package".
6. Check the checkbox of the item u have added and see the properties if it has been added properly. 7. Now click on the save button.
8. After the object is saved, click on the export button. 9. U will have an option to select where to store the .epa file which will be generated. U can overwrite an existing one by selecting the browse button, or store it with the generated name in the location it automatically generates. 10. Now Click on the Start Export button.
11. once the export is completed, it shows a report on how much time is taken to generate the .epa file. 12. Here there is an option for downloading the .epa file. Click on the link and download the file. This file is ready to be uploaded into any other EP Server.
For Import:
Pre-requisites: You have to copy the .epa file created while export into the local drive. Optionally, you have to manually copy the .epa file generated in the export function into the Import directory of the server ie. chooseFollow the steps below for importing a certain file. 1. Go to System Administration in the portal, and click on Transport?Import. 2. For the source of the package, Click on the radio button Server for the .epa file you have copied lately. Else, click on the radio button on client if you are operating in the client and select the .epa file you have stored on the local drive. 3. Now select the file from the browse option and click on Upload.
4. Now click on the import button. 5. Once the import process is finished, the report is shown. In the whole process, the par files are not included in the .epa files. For the par files to be included into the .epa files then we have to change the pcdStartup.properties file in the server. The property to be changed is Pcd.TransportApplication.Export.ExcludeObjectTypesAfterRuleProcessing: Keep this property's value as empty for enabling the par files to be uploaded into the .epa. You can check for this property in the portal in the following -System Administration-Support-Portal Content Directory-PCD Configuration.

Development, Quality , Production server

Dear Experts,
I am new to SAP HR , Can some one help to understand the following terms.
1. Development server , where it has more clients. I am not able to understand it , like why it is being used.
2. Quality server - What is the purpose of it ?
3. Production server - what is the purpose of it ?
As a SAP HCM Functional consultant, what is our role in this 3 server ? If we need to make some changes where we need to do the configuration ?
4. Also please let me know what is Transport request ?
Waiting for the valuable reply from you experts.
Regards
Bala

Hi Bala,
In the Development system the SAP ERP is being configured: Customizations are done by the different processes consultants, developments are done by the programmers, etc.
The main system is the Production system - this is the system where the end-users work.
The end-user are required to perform checks and quality-assurance processes before the different programs and table are transported to the production system - these checks are performed on the Quality Assurance (QA) system.
Each system may have several clients, E.G., the Development system has the main client (usually its 100) - in which the consultants and developer perform the configurations, and another client (e.g. 110 or 120) - in which they can test the configuration.
Each system usually sits on different server. This is the call of the organizational IT department and the BASIS system. They will tell you how to logon to each system.
The transport request, his name suits him, is being used to transport customizations and developments from client to client and from system to system.
Regards,
Liran

Transporting BPC 10 from Development to Production

Hi all,
I am working on a BPC 10 project and it is time for us to test in production.
I am aware of two main routes to go from a Dev to Prod system, the first of which I attempted yesterday:
1. BW Transport
- Set the environment offline
- Log in to BW
- Transaction code RSA1
- Transport Connection
- Object types > More types > Environment > Select Objects ([see link|http://i39.tinypic.com/2wrpun6.png])
- We did select quiiiite a lot of data to transport which may have been an issue - everything in the environment
- Ticked all the objects on the right hand side, then clicked the van saying 'Transport Objects'
- We then logged into SE 10 and released the transport: ([see link|http://i44.tinypic.com/2gw9ir8.png])
2. Backup and Restore using UJBR transaction
- Back up the whole environment
- Restore onto production
The issue
- We have only done the first method as understand the UJBR one is a bit of a workaround and not as reliable
- We had an exceptionally high number of logs generated, causing the log drive to fill up and Short Dump in ST22
- It generated 8GB of logs on the Development server after the first attempt, we backed up and cleared out the logs and re-transported a new request which generated 45GB of logs - causing the same 'transactional log file' issue
Does anyone have any advice in terms of BPC 10 transports? We found a decent how-to which essentially just walked us through part 1, then we've been checking ST22, SLG1 Analyse Application log, SM21 System log, and DB12 to check capacity to try and problem solve..
Thanks!
Nick
Screenshot of the error log: [http://i40.tinypic.com/2yzk9jl.png|http://i40.tinypic.com/2yzk9jl.png]
Edited by: Nick Carter on Feb 3, 2012 3:18 PM

Hi Rich - thanks for your advice.
I've taken your advice on board and deselected virtually everything to transport, with the exception of the model, model dimensions and an input schedule.
This is the selection this time around: http://i44.tinypic.com/a4ahw7.png
I then clicked the'Transport objects' button and made a request for transport: [http://i43.tinypic.com/17x1fc.png|http://i43.tinypic.com/17x1fc.png]
Followed by jumping to Transprot Organiser in SE10 and then 'Releasing directly' when selecting the base node NWDK903388 first, followed by the same action on parent node 'Projet Dragon Transport 005': http://i44.tinypic.com/2i8kh95.png
When looking at the transport logs, it appears it has released from NWD (Development) but not imported into NWP (Prod): http://i44.tinypic.com/2q1xvdl.png
We aren't experiencing the same issue of logs at the moment so it suggests it was related to a high volume data manager file?
Any help would be much appreciated!
Nick
NB: I have also made sure that on our Production server we had the identically named environment which is something we didn't have before, whichI think we needed(?) I also checked I have superuser access account on both Dev and Production to ensure that wouldn't be a problem.
Edited by: Nick Carter on Feb 3, 2012 4:34 PM

Error while transfer request from development to production server

Hi,
We have generated some request on development and while transer the same on production server, following error message appear "Transport control programe tp ended with error code 0247"
Pl give us the solution.
Regards
Suresh

hi
repeat your transport run
or re-create transport and execute again.

Substitution transport user exit missing

Dear experts,
I have created a substitution with the use of a user exit.
After creating the transport and importing it in our test system everything works fine.
However, when I transport the substitution to our production system, the user exit is missing in the substitution rule.
Also re-importing executing program RGUGBR00 this was not solved.
Does anybody have an idea what the cause of this is?
Thanks.
Jurriaan

Yes, they are assigned.
But in the meantime I have found the issue.
The issue had to do with table GB01.
In Boolean Class 15 type S was excluded. This type S contains the substitution fields.
After deleting the X in the field Excluded, the user exits were visible again.
Thanks for thinking with me.
Regards,
Jurriaan

Transporting WEBSITE developyed by WPC to Production server.

Hi Experts,
I have developed a Test website using WEBPAGE COMPOSER 7.0 in my Development portal. If we want transport this site to Production portal , Can we do it ? If so , What is the procedure? Do the production server need to have WEBPAGE COMPOSER deployed ? what else ?
Thanks in Advance.
Suresh..

Hi,
Check this:
http://help.sap.com/saphelp_nw70/helpdata/EN/47/276706548a2deae10000000a1553f7/frameset.htm
Regards,
Praveen Gudapati

Need help with transporting User Exit Variable in CMOD ZXRSRU01

Hello Gurus.,
I changed the existing user exit variable in CMOD ZXRSRU01.,before changing neither it ask for any transport request, nor when I activated the include program .
Well., I tried this........I went to goto-> Object Directory Entry.,
changed the Package and person responsible for and then it asked for transport request...but this dint work...
Now., how can I capture the changes in a transport request, so that, i can move the changes to production system?
is there anyway to solve my problem?
Regards,
PNK

Thanks for ur help VIKRAM...i solved the issue...the changes are captured in someother request, but it was not showing in the Version Management.'
I checked the Lock Overview in the Object DIrectory Entry and found out that it was capturing in different request. I released the request and when I tried to change the code, it asked for new transport request.
It worked..
Thanks for your help..
Regards,
PNK

Transport request does not exist in production server

I created a transport request and released it. However, the cofile and datafile are not created in production server. It supposed to appear automatically once I released, but it is not created and I was not able to add this request in the production. May I know what might be the cause? Any setting that is wrong in my development server?

Hi,
If you have configured transport route properly then when you will release request then it will automatically come in your production queue (Since you have no quality system). If transport is not coming in production queue, it means there is problem with transport route configured.
Also, check whether data file or cofile exists in transport directory or not. If there are no files then it means it is a local transport request.
Thanks
Sunny

User Exit after creation of Production Order

Hello gurus.
I would like to populate a table with the Production Order number once I create the document in transaction CO01. The problem is, I cannot find a user exit that can be executed after I save the Production Order number.
We use internal assignment of production order numbers, so we don't know the number of the document until it's created. I'd like to find a way to be able to get the number of the document, once it's created and add it in a custom table I created.
Is there a User Exit for this? Or maybe an alternative way of achieving this?
Thank you.

Fernando,
I would suggest you to create a custom table and custom program. The program should pick up the all the orders which were created from AFKO table, on successful completion of running the program it should update the custom table with the date and completion time. So next time when this program is run, it should pick up order who's creation date and time is greater than that in the custom table. You can schedule to run this program in background.
Regards,
Prasobh

User exit for confirmation of production order for mandatory fields

While confirming the production order ( CO11 & order type -PP01) , production order should not be saved/confirmed without entering the mandatory field (No. of employees), which is the mandatory field set in the config of "define field selection for confirmation"
It is allowing if user does't click on the tab (personal/additional data).
Without entering the mandatory fields in any tab system should not allow user to confirm the order
How to apply this lock ?
Also while doing the production confirmation (Co11N) ,user should not have the rights to changes ,adds or delete the component and its quantity OR if user make the changes , suystem should not allow to post the confirmation?How to make this in SAP?
regards,
Ramesh Bandi

Hi,
You can check the user exit CONFPP05 (Customer Specific Input Checks when Saving) and its function exit EXIT_SAPLCORF_105 in the transaction code SMOD.
With this enhancement you can update your own data after saving the confirmation. You cannot change the confirmation itself.
In this enhancement it is strictly FORBIDDEN to send error messages or other dialogs, otherwise data inconsistencies could occur, for which SAP accepts no liability.
You can check with your ABAPer's.
please check & revert back to me.
Regards,
Mohan.R

User Exit: Saving data in Production Order Header Long Text

Hi PP Gurus,
Can any one let me know which user exit can be used to save some data in the Long Text of Production Order Header.
We try PPCO0007, it works well on ECC, but my client's system version is 4.7, it does not work.
In 4.7 version, is there any other User Exit or BADI can be used to comply with this requirement?
It's quite common requirement, hope someone can help me. Thanks.
Best regards,
Sun Qiang

Hi All,
Thank for your reply.
After saving the text using 'SAVE_TEXT' function module and commiting it you need to update the 'ltext' field in AUFK table.
SELECT SINGLE * INTO wa_aufk FROM aufk WHERE aufnr EQ '000012345678'.
wa_aufk-ltext = 'D'.
MODIFY aufk FROM wa_aufk.
It works in Enhancement PPCO0007.
This call can be closed. Thanks.
BR
Qiang

Transport user exit frm development to production server.

Similar Messages

Maybe you are looking for