Transport using CMS Export Error on Integration Repository

Hello
We are transporting an maximo-integrate,max60-ERP2004 via export mode
Transport using CMS. Got an error during export. The error says :
"Workspace was not defined for software component version Maximo-
Integrate,MAX60-SAPERP2004 of mro.com
Assign the software component version in the landscape configurator of
the change management service to a track."
As already software component version Maximo in the landscape
configurator of the change management service to a track has been
defined.
The Software component (SWCV) has already been defined on CMS. But still getting the error.
Please advise anybody comes across these type of error.
Thanks & regards
AK

Thanks sumit for reply. Here is the information:
Yes I choose Repository Type : XI
Track ID : IR.ERP
Track Name : IR.ERP
Track Description : ERP System : XI Integration Repository Objects
XI URL Development : http://sap03.ab.energy:50000/rep/
XI URL Consolidation System : http://sap03.ab.energy:50100/rep/
Because we have 2 system landscape.
ADD SWCV
MAXIMO-INTEGRATE mro.com MAX60-SAPERP2004 Source
But on Domain Data:
CMS Name : XID
CMS Description : XID
CMS URL : http://sap03.ab.energy:50000
CMS USER : LSADMIN
CMS Password : XXXXX
Domain ID:XID
Domain Name:XID
Domain Description:XID
SLD URL:http://sap03.ab.energy:50000
All the information is correct. Above thread is not suitable.Then Why I am getting the error message.
Please advise..
Thanks & regards
Sanjay

Similar Messages

Reg:: Error while XI Transport Using CMS

Hi! SAP Gurus,
I am trying to transport XI Integration Design and Configuration Objects from X42 (DEV) to X44 (Quality).
I want to transport Transport ID Design:5909a730a2fe11dcc8dd001125e7370c
Configuration: 1c3d0c90a30111dcb2c0001125e7370c
I was succefully transported the Design object but while I am transporting the Configuratio Object at First I am moving from X42- CMS and then from CMS-X44.
ERROR 1 :: But once I am Exporting I am getting an acknowledgement message and finally it was moving to CMS. But there in Consolidation TAB it was coming IMPORT FAILED.
But when I tried 6-7 times I sended it successfully and there that objects first went (sits) directly in Change lists of quality server ID Part. From change lists I am transferring to Scenarios by Right clickTransport.
ERROR 2: According to CMS some parameters will be lost in communication channels and in some other objects. while transporting using CMS.
How to recollect that parameters again ?
Will you please confirm simply copying the parameters from Development server and again editing or Is there any other method?
ERROR 3:. While I am activating any object in Configuration object I am getting the error

Unable to move object. Change lists were not part of the same import
Kindly Solve this issue and If Possible send me a brief note and complete procedure of
HOW TO TRANSPORT XI REPOSITORY AND CONFIGURATION OBJECTS USING CMS FROM DEVQAPROD SERVERS?
Hi! Gurus,
My Main Problem is :::
After Exporting from DEV---->CMS---->Quality it will goes to Change Lists of Quality Server QA and after that I am transferring them to Scenarios TAB by Right Clicking --> and Press Transfer..
Problem::: After that When ever I am trying to activate they are not activating I am getting the error::

Unable to move object. Change lists were not part of the same import

Hi! Gurus,
If you have any material with screen shots and also the solution to the above problem kindly send to my Mail ID::[email protected]
Thanks::
Amar Srinivas Eli.

Could not see Transport using CMS in Integration Directory

Hi,
I have Changed the Parameter setting to true in Integration Builder for Integration Directory and Integration Repository. When i login into Integration Directory i cannot see the option Transport using CMS in Export. I can only see Transport using File system.
Please help me out in configuring the CMS correctly.
Thanks,
Fahad

Hi Fahad,
This thread answers ur question
CMS Transport mode unavailable in Integration Directory
cheers,
Prashanth
P.S Please mark helpful answers

Integration Directory - Transport using CMS does not appear

Hi guys,
I'm having problems with one thing I thought it would be trivial.... I'm not able to get the option 'Transport using CMS' in the Integration Directory available.
I've done the necessary steps on the exchangeProfile in order to transport objects using CMS.
1. Configuring ExchangeProfile
IntegrationDirectory
com.sap.aii.ibdir.core.cms.enableTransportWizard=true
com.sap.aii.ibdir.core.cms.enableClTransport=true
IntegrationRepository
com.sap.aii.ibrep.core.cms.enableClTransport=true
com.sap.aii.ibrep.core.cms.enableTransportWizard=true
Added the values to com.sap.aii.ib.client.properties
u2022 com.sap.aii.ibrep.core.cms., com.sap.aii.ibdir.core.cms.
2. And after, I've created the tracks needed for IntegrationRepository and IntegrationDirectory.
For the IntegrationDirectory I've followed SAP's description:
"You have created an XI track in the Landscape Configurator and entered the addresses of the development, consolidation, and productive directory. There are no software component versions in the Integration Directory. Therefore, for directory transports using the CMS, you specify the software component version SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0). This refers to all configuration objects of the Integration Directory.
Once you have made this setting, you can create transport lists for the CMS. The status of the change lists no longer changes to Closed immediately after their release, but first changes to Transportable."
3. I've restarted the J2EE Server.
When I export the objects from IntegrationRepository everything runs OK, but on the IntegrationDirectory I'm not able to have the option 'Transport Using CMS' available.
I've read several threads on the SDN but none of them solved the problem...
Can anyone give me any hint ?

Hi Sameer,
No luck.... There's nothing similiar to what I'm describing and the points which are mentioned i've already covered them.
Thanks for the tip, I was hoping it could give me a push...
Any ideas...?

Error when transporting using CMS

Hi,
Please ssist.
We are on PI 7.0 SP17. We want to transport using CMS from Dev box to Prod system. We get to export steps. Select Mode, able to go pass, Then Select Objects We select them and Click on Finish(at bottom of pop-up screen). "correct mark"Then We get Transport Using CMS. Trnsport request generated and released for transport using CMS, Shoose Tools-> System Messages to display result. Then after a few minutes the screen pops a long message.
"Sent on 11/18/09 at 10:39 AM: CMS (server: http://server:port) cannot export the following transport lists:
Export list (send time = 11/18/09 10:39 AM, component = Default Software Component, ID = e10bf190d41d11dead8f00096bdd826a)
Details: com.sap.aii.util.misc.api.BaseRuntimeException: Reading GDI ... FAILED. Source is not well formed. SAXParseException at line -1, column -1. Details:
Message: Generic Exception:
Stacktrace: com.sap.engine.lib.xml.parser.NestedSAXParserException: Generic Exception: -> com.sap.aii.util.misc.api.BaseRuntimeException: Parsing generic data instance: begin of unexpected element "html"!"
Regards
Scharlotte

Check if it is a password-related issu as mentioned here: Error when defining Xi-track in CMS
Regards,
Abhishek.

"Transport using CMS" option does not appear

Hello Guys
I use CMS for transporting, and it works fine! But today I created a new SWCV, created a Track on CMS to this SWCV too. But when I choose "Export" on IR, the screen that appers does not show the "Transport using CMS" option. Only the "Transporte using File System" option is available for this SWCV.
Any idea?
Thanks in advance
Julio

Hi (and thanks for answering)
The SWCV is in http://host:port/rep/support/admin/index.html, but its name is "Not available"
I did update my domain, but it didnt work at all (the name of the SWCV still is "Not available" and the "Transport using CMS" option didnt appear in IR).
Julio

Transport using CMS between Dev, Qual and Prod

Hi,
I'm a little bit curios if there are others out there using CMS for transport in a XI production line -
Dev -> Qual -> Prod.
My company is using it, and it seems to me that at consolidation stage, you can only select transports related to a SWCV and NOT select transports individually or related to a namespace?
Anyone?
Our version is XI 3.0 SP14 latest patch.
best regards
Torstein Nesby

Hi Torstein,
I saw your other threads related to this as well as your thoughts on 'Quality Feedback' (which I agree with btw). It sounds like you may have been able to come to a resolution to a problem that continues to cause me issues. Can you review and provide some guidance on the following please?
Current Environment / Setup:
- XI 3.0 system, SP12
- Single SLD with appropriate Group / transport Targets setup
- Single IR Track, Single ID Track
- CMS usage for transports. Successful from Dev to QA, QA to Prod has not yet been attempted.
- SWCV are setup in IR and are specific to tech system / product. For example there is a SWCV for Peoplesoft where all related message / data types for Peoplesoft are located. There is another SWCV for SAP, another for Oracle, etc.
- Message Mappings and Interface Mappings are created in the target SWCV. This means that a single interface will normally consist of 2 SWCV to be migrated.
- Currently migrations are bundled in Transport (export) lists vs change lists when migrated out of the Dev environment
- As an aside, I understand the approach of effectively setting up a SWCV per interface with Usage dependencies across SWCV's for reuse of data / message types, however this is the architecture that was recommended at the start of development for this first release.
What I am attempting:
- In the Assemble tab in the transport Studio I want to be able to use a 'Subset Assembly' option to selectively choose which transport / change lists to allow to go to production.
- Based on reading the SAP Help in the XI system, numerous SDN Posts, the SAP docs "Using CMS for XI 3.0" and "How to Transport XI Content Using CMS" it appears this option should be readily available for both the IR AND ID.
Issue:
- For both the IR and ID when I go to the Assembly tab and get the subsequent popup (after "Assemble Components") the "Subset Assembly" option is not visible. Supposedly when going to this Assembly tab, selecting a specific SWCV (not the default 'All Components' option), and choosing "Assemble Components" generates a popup with a checkbox listed for "Subset Assembly". I get the popup in both the IR and ID but the "Subset Assembly" checkbox is not part of the window.
The docs are somewhat unclear in this area. It alludes to seeing this option after the initial migration to Prod is done (which again we have not done yet), but only mentions this in the context of the ID. Another doc alludes to seeing Emergency Transports created in CONS (QA) as if that may be a pre-req to having that option, but is a weak reference.
Can you advise on:
1) Do you see the "Subset Assembly" option in the popup?
2) If so:
a) Did you see it prior to the inital migration to Prod?
b) Do you see it for both the Directory and Repository in the Transport Studio Assembly?
3) Any other thoughts on why I'm encountering this issue?
Thanks for your help!
Darin

Error in Integration Repository: ..SecStore.properties does not exist

Hi Guys!
I'm getting this error when I try to tick and save the values "Objects Are Original Objects" and "Objects Are Modifiable" in a software component version in the Integration Repository:
"ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
<hostname>\sapmnt\XIP\SYS\global\security\data\SecStore.properties" does not exist although it should.."
Would any of you know what might be wrong?
I'm using PI 7.0.
Warm Regards,
Glenn

Is your XI installed on SQL Server? Seems like there is a db connection error woth XI to the underlying database.
Check if the DB instance is running.
VJ

Authorization Error in Integration Repository

Hi,
I have authorization issues with Integration Repository(IR) in XI 7.0 Server. While logging into IR, i use the PISUPER id which works fine. But if i use other id it throws authorization error.
I am using client 710 and have created an id with relevant roles to login to IR which failed. Then i created same id on 001 client and could logon to IR with that id. This means that while logging into IR, it points to 001 client and not 710 that i am using. Thus i need to use 2 different ids: one for IR that points 001 client and other for logging into SAP system on 710 client.
I referred the below thread which tells the same.
Authorization Error
Can someone explain me about this.
Also can i use the same id for logging to IR and SAP system?
Regards,
Chintan Sheth

Hi,
Thanks for replying.
Yes i know that users and roles are client dependent. But my problem is different.
I hav created a new client 710 which is copy of 001 client and also performed the post steps as per SAP Note 940309.
The problem i face is while logging to Integration Repository. I have id PISUPER on both the clients 001 and 710. But for logging to IR it accepts the logon credentials of 001 client and not of client 710. I understood this when i changed the password of PISUPER on client 710.
As per my knowledge, for logging to IR it should use the user master record of client 710.
Kindly help me on this.
Regards,
Chintan Sheth

Error launching integration repository (Java)

Hi,
When trying to launch the integration repository side (within the explorer), I get a poup requesting a network password to a scheme. I am not sure what to enter after clicking on the No button, the box pops up saying that it is checking for latest version.
Any ideas, I can not get into the repository.
Thanks,
Leanne

Hi,
It seems to be a problem with the Browser proxy setting that Java web start is picking up by default.
go to preferernces and set the proxy to none.
Proxy has to been set none in Java web start not in IE.
Also
Your browser settings might be restricting you to access web start every time and asking for your authorization before it logs on. Try to access your XI Server from some other machine and check that are you still getting the same issue:
To access XI Server use this path:
http://<xiserver name of IP Address>:<J2EE port number>/rep/start/index.jsp
You can check proxy settings in : Open Internet Explorer -> Tools -> Internet options -> Go to Connections tab -> Lan Settings.
Thanks
Swarup

Transport using CMS?

Hi all,
We have an XI 3.0 system with its SLD, and a lot of developments on it.
We installed PI 7.0 on another server, with its own SLD, and we would like to import the products, software components, business systems and technical systems, and the repository and directory content from XI 3.0 system.
With CMS, are we able to also import the SLD content?
If not, how can we do without to manually recreate all the objects of the SLD?
Thanks a lot,
Gregory Paris

Hi,
I am not sure about CMS but I think it can be done via file transport (though not sure about XI to PI thing).
Try to do it via file transport mechanism.
Regards,
Gourav
Reward points if it is helpful

Error in Integration repository

Hi
I craeted a namespace under the SWCV.After creating the namespace i looked at the data types.
There will be 2 default data types ExchangeFaultData and
ExchangeLogData under that.Both are inactive and when i try to activate them i am not able to do it.it gives an error saying
"Namespace is not defined in the SWCV"
Can you please tell me what is the problem?

hi,
Along with them try activating your software component too..
and also
make sure after adding a new namespace u need to save and activate it first and then create any objects.
Thanks,
Vijaya.

Transportation using cms

Hi
suppose I have a proxy-xi-file scenario. If I am transporting my scenario from DEV to QA, how can I handle the proxy code that exists on appication system ?? In real time ........whether application system is going to be same during DEV, QA and PROD or it is going to be different ??
thanks
kumar

Hi
In real time ........whether application system is going to be same during DEV, QA and PROD or it is going to be different ??
Business landscape might differ.
(for example DEVCLNT100 on DEV can be QATCLNT500 on QA system)

Regards
krishna

Authorization Error For XI Integration Repository and Directory

Hi All,
I am new in this field.
While accessing Integration Repository and Directory, I am getting the error "No Authorization for this action". I am trying to login with user J2EE_ADMIN, have following roles :
SAP_J2EE_ADMIN
SAP_J2EE_ADMIN
SAP_J2EE_GUEST
SAP_XI_ADMINISTRATOR_J2EE
SAP_XI_CONFIGURATOR_J2EE
thnx and regds:
N.N. Tiwari

hi,
go to http://<host>:<port>/index.html -->User Management log in using j2ee_admin
When you go into one of the tabs, there will a client entry . Just change.
You should able to do the same thing with UME provider service in the visual admin.
Please check Note 938980 if you are using VPN.
This is probably a Java Web-Start issue. Please check logon with other JWS versions. Also check if you have any conflicting JWS versions installed.
This is a checklist for logon errors:
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Also check the methods in these threads:
Authorization error; unknown user name or incorrect password
Authorization error in Integration Repository.
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Problem in Transport of ID objects using CMS

Hi,
I am using CMS to transport my IR and ID objects from DEV->QA->PROD.
While I am able to transport my repository objects successfully,I do have a problem with trnasport of ID objects.Especially this problem seem to exist only if i try to export individual objects.There isnt any issue for a complete ID transfer which is not my req.
When doing "Release FOr tranpsort" from QA after making the communication channels changes,The object appears in the "assemble " tab.
Ideally Once I assemble the objects,it should diasappear out of assembly page and should be appearing in the "Approval" tab..
But the objects successfully get assembled and dispapper from assembly ,they dont seem to be present in the next approval step.I am unable to track where they are lost.CMS logs doesnt show any error as well.
Any pointers from this issue?
Regards,
Rashmi

Hi,
This will help you,
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/55/7a09d0d7d34b828a9740e322b9222c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/54/8b5b0555264a93a679c2117fedc748/frameset.htm
This PDF file will help you a lot,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Regards
Agasthuri Doss

Transport using CMS Export Error on Integration Repository

Similar Messages

Maybe you are looking for