Transport validation in GGB0

Dear Experts,
How to transport validation changed through GGB0? since the menu 'validation-transport is not display'. I have try /nsu53 but no authorization failed there.
pls advice.
thanks

solved.
IMG-FA-special purpose ledger-tools-transport-transport validation

Similar Messages

FI Validations through GGB0

Hi
I have a requirement where i need to post a warning message based on the date difference between Invoice date (BKPF-BLDAT) and posting date (BKPF-BUDAT) while posting a document in tcode FB60.
I tried using the tcode GGB0 to build a validation but it did not help. I looked into the available userexits (U100) and tried to implement it. However, the form U100 refuses to recognize the fields from BKPF.
Can some one throw light on how to write your own code in these userexits?
Thanks
Nag

Hi,
For the first case where you have directly put the validation in GGB0 you can check the following things
1) Settings in Tcode OB28 for activating the validation for a paricular company code.
2) Try Running the Generation program RGUGBR00.
Regards
Abhishek

How to Transport Validation

Hi Experts
I had created Valiation in our Quality system.
How to move it to Production.
Kindly let me know the procedure.
Thanks
KumarRaja

Hi,
You can transport from Validation -- Transport.
You can also transport validations using a specific Customizing transaction. In this step, you can specify which validation is to be transported. You can also specify whether the logical rules, sets, messages, application areas and Boolean classes used in the validation are also to be transported.
Actions to be followed:
- Enter the name of the validation to be transported.
- Specify which information concerning the validation is to be transported with the validation.
Caio
Raghu

AIP-51505: General Validation Error - SFTP transport - validation disabled

Configuration :
internal DC with SFTP
external DC with SFTP (via proxy)
Business Protocol          Custom Document over Generic Exchange
MLR 12? (patch 8703404)
3 environments have the same tip.properties
2 environments pick up and send all files successfully.
I cannot see a difference between the deployments that is causing the validation error.
[also in all three B2B's are an ebXML and AS2 trading partner configuration]
The 3rd generates validation errors for all files (14) in the b2b.log and sends some (1-7).
Note that the sent ones change, if a failed one is retried in the source directory, sometimes it is sent successfully.
In the failing/validating deployment there is no validation for (cut and pasted from UI screens) :
Document Protocol Revision Details = Translation Enabled False Validation Enabled False
Document Types (Document Definition Details for each document def) = Is Translation Enabled False Is Validation Enabled     False
tip.properties (environment where error occurs) :
#valid valudes for DiagnosticLevel:
#DEBUG, INFORMATION, WARNING, ERROR, FATAL.
#default logging level
oracle.tip.DiagnosticLevel = ERROR
#default component log level for B2B Engine
b2b.oracle.tip.DiagnosticLevel = ERROR
# following logging properties to be set back to false after resolving Sequence 98
# oracle.tip.adapter.b2b.logPayload = true
# oracle.tip.adapter.b2b.packaging.logDecryptMessage = true
b2b.oracle.tip.DiagnosticLevel.Repository = ERROR
b2b.oracle.tip.DiagnosticLevel.BusinessLogicLayer
b2b.oracle.tip.DiagnosticLevel.B2B
b2b.oracle.tip.DiagnosticLevel.ModelValidation
b2b.oracle.tip.DiagnosticLevel.ValidationRule
b2b.oracle.tip.DiagnosticLevel.TechStack
b2b.oracle.tip.DiagnosticLevel.Deployment
b2b.oracle.tip.DiagnosticLevel.Reports
b2b.oracle.tip.DiagnosticLevel.UI
#default component level logging for UI
ui.oracle.tip.DiagnosticLevel = ERROR
#specify component log leel to override default;
ui.oracle.tip.DiagnosticLevel.Repository = ERROR
ui.oracle.tip.DiagnosticLevel.BusinessLogicLayer
ui.oracle.tip.DiagnosticLevel.B2B
ui.oracle.tip.DiagnosticLevel.ModelValidation
ui.oracle.tip.DiagnosticLevel.ValidationRule
ui.oracle.tip.DiagnosticLevel.TechStack
ui.oracle.tip.DiagnosticLevel.Deployment
ui.oracle.tip.DiagnosticLevel.Reports
ui.oracle.tip.DiagnosticLevel.UI
oracle.tip.adapter.b2b.encoding=UTF-8
# Diagnostic Service defaults
oracle.core.ojdl.OrganizationId = oracle.com
oracle.core.ojdl.ComponentId = tip
oracle.core.ojdl.HostingClientId = beta
oracle.core.ojdl.BufferSize = 100000
oracle.core.ojdl.FlushInterval = 5000
# Specific diagnostic settings
oracle.tip.LogDirectory = /space/sw/oracle/products/ias/b2b/ip/log
oracle.tip.LogMaxSegmentSize = 10000000
oracle.tip.LogType = text
# option to save old log when rebounding the service
oracle.tip.LogSave = true
# B2B Info
oracle.tip.adapter.b2b.NumOfWFListeners = 1
oracle.tip.adapter.b2b.NumOfIPListeners = 1
oracle.tip.adapter.b2b.WFAgentName = OUTAGENT
oracle.tip.adapter.b2b.RMIPort = 5111
oracle.tip.adapter.b2b.RMIInstance = IP
#oracle.tip.adapter.b2b.WalletLocation = file:/etc/ORACLE/WALLETS/oracle/ora_wallet.txt
oracle.tip.adapter.b2b.ContinueValidationOnError = true
oracle.tip.adapter.b2b.MultipleIdentifications=false
oracle.tip.adapter.b2b.allTPInOneDirectory=true
oracle.tip.adapter.b2b.DocumentRouting=false
#oracle.tip.adapter.b2b.edi.identifyFromTP = Interchange | Group | Exchange
#oracle.tip.adapter.b2b.transportTrace = /space/sw/oracle/products/ias/b2b/ip/log/transport.trc
#oracle.tip.adapter.b2b.edi.ignoreValidation=InterchangeReceiverID,InterchangeSenderID,GroupReceiverID,GroupSenderID,GroupSenderQual,GroupReceiverQual,InterchangeSenderQual,InterchangeReceiverQual
#report Certificate validation as ERROR or WARNING; default value is ERROR
#oracle.tip.adapter.b2b.tpa.validateCertificate= ERROR | WARNING
#oracle.tip.adapter.b2b.document.NoValidation = inbound | outbound
# HTTP Proxy Host and Proxy Port
oracle.tip.adapter.b2b.ProxyHost =
oracle.tip.adapter.b2b.ProxyPort =
# MaxCachedSessions is set to 0 means no ExecutionContext
# is stored in HTTP session (IP cache is empty).Line below overwrites default
# value equals to 5 when 5 concurrent users could store context in their sessions
# By commenting that line you might turn IP cache on.
oracle.tip.ui.MaxCachedSessions = 0
# Suppression of Validation Warnings
oracle.tip.buslogic.validation.SuppressWarnings=false
# Callout directory
oracle.tip.callout.directory=%s_calloutDirectory%
# persistence directory
oracle.tip.runtime.persistence.dirName=%s_persistenceDir%
# enable ONS reverse ping
enableONS=true
# Optional property which user can set to specify saved report encoding e.g. UTF-8, UTF-16LE etc
# By default this property is not set, in this case the saved report csv file
# will be generated by using the native encoding
# Users can set this parameter to change the encoding of the generated saved report csv file
#savedReportEncoding=UTF-8
# Please don't modify the following properties
# Connection Info
username=%s_intgDBUser%
password=%s_intgDBPasswd%
#connect=jdbc:oracle:thin:@%s_intgDBHost%:%s_intgDBPort%:%s_intgDBSid%
drivertype = thin
tnsentry = inst1
host = %s_intgDBHost%
port = %s_intgDBPort%
sid = %s_intgDBSid%
oracle.tip.connection.useRepositoryAPI=on
oracle.tip.connection.oraclehome=/space/sw/oracle/products/ias/b2b
# property specific to Deployment
oracle.tip.deploy.workflow_username=%s_wfUsername%
oracle.tip.deploy.workflow_passwd=%s_wfPasswd%
oracle.tip.deploy.workflow_tnsname=%s_wfTnsname%
# UI user authorization
authorization = true
# encryption key used for securing secrets in the schema.
oracle.tip.security.key=Be8ejb7yOX3rSefEr5pxBl49WLc0Iej9VeI8jykdjRfv
##oracle.tip.adapter.b2b.WalletLocation = /sw/oracle/products/ias/b2b/Apache/Apache/conf/ssl.wlt/default/b2bwallet
#oracle.tip.adapter.b2b.WalletLocation = /sw/oracle/products/ias/101202/ib/Apache/Apache/conf/ssl.wlt/default/b2bwallet
oracle.tip.adapter.b2b.WalletLocation =file:/sw/oracle/products/ias/b2b/Apache/Apache/conf/ssl.wlt/default/b2bwallet/ewallet.txt
# performance best practices
oracle.tip.adapter.b2b.sleepTimeout=1
oracle.tip.repos.RowSize=100
oracle.tip.adapter.b2b.receiveTimeout=1
oracle.tip.adapter.b2b.TPACache=true
The b2b.log from the failing environment has some lines not seen in the other two environments (the lines referring to MimePackaging:unpack) :
2010.04.29 at 19:07:14:295: Thread-11: B2B - (DEBUG)
Protocol = SFTP
Version = 2.0
Transport Header
filename:SA_ENVSTATUSES.txt
filesize:1
file_ext:.txt
filename_format:%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
fullpath:/mnt/maximage_prd/sa_transfer/SA_ENVSTATUSES.txt
timestamp:Thu Jan 15 09:29:53 PST 1970
2010.04.29 at 19:07:14:295: Thread-11: BusinessLogicLayer - (DEBUG) New ExecutionContext has been created
2010.04.29 at 19:07:14:296: Thread-11: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:296: Thread-11: BusinessLogicLayer - (DEBUG) Recieve a new PersistencyService
2010.04.29 at 19:07:14:299: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Design
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: queryConfiguration
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) A new PersistencyService is created
2010.04.29 at 19:07:14:340: Thread-11: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) InterfaceListener:onMessage - Invoke inbound callout - null - null
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) InterfaceListenersyncAckEBMSchecking header names
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
2010.04.29 at 19:07:14:342: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:343: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: createDataStorage
2010.04.29 at 19:07:14:345: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: createDataStorage
2010.04.29 at 19:07:14:346: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:346: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: createWireMessage
2010.04.29 at 19:07:14:348: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: createWireMessage
2010.04.29 at 19:07:14:348: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
2010.04.29 at 19:07:14:348: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:onMessage sendEventtrue
2010.04.29 at 19:07:14:359: Thread-11: B2B - (DEBUG) DBContext commit: Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:363: Thread-10: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:363: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processEvents begin transaction
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Enter
2010.04.29 at 19:07:14:364: Thread-10: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:364: Thread-10: BusinessLogicLayer - (DEBUG) Push Stack: queryWireMessage
2010.04.29 at 19:07:14:364: Thread-11: B2B - (DEBUG) DBContext commit: Transaction.commit()
2010.04.29 at 19:07:14:364: Thread-11: B2B - (DEBUG) DBContext commit: Leave
2010.04.29 at 19:07:14:365: Thread-10: BusinessLogicLayer - (DEBUG) Pop Stack: queryWireMessage
2010.04.29 at 19:07:14:365: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Exit
2010.04.29 at 19:07:14:366: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Enter
2010.04.29 at 19:07:14:367: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Exit
2010.04.29 at 19:07:14:367: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
2010.04.29 at 19:07:14:369: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Exit
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:identifyExchange Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:identifyExchange SOAPAction is [null]
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) MimePackaging:unpack:Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) MimePackaging:doUnpack:Enter
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = UTF-8
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@391da0
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpack:Exit
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {SFTP}
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = SA_ENVSTATUSES.txt
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - ENVSTATUSES
2010.04.29 at 19:07:14:373: Thread-10: B2B - (ERROR) Error -: AIP-51505: General Validation Error
     at oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin.decodeIncomingMessage(GenericExchangePlugin.java:408)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1477)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2576)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2446)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2401)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
     at java.lang.Thread.run(Thread.java:534)
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-51505: General Validation Error
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {filename=SA_ENVSTATUSES.txt, filesize=1, file_ext=.txt, filename_format=%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt, fullpath=/mnt/maximage_prd/sa_transfer/SA_ENVSTATUSES.txt, timestamp=Thu Jan 15 09:29:53 PST 1970}
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-51505: General Validation Error
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2010.04.29 at 19:07:14:375: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
2010.04.29 at 19:07:14:375: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information

Thank you for the suggestion, unfortunately, I cannot get it to work.
I've updated the IDC transport server to 3 different filename_formats, and tried the corresponding files, with correct names to match the filename_format.
After updating the IDC I validated the trading partner (host).
I then updated the agreement using the updated IDC, and validated the agreement.
I then validated the host again.
Then I created a new deployment.
And still received the error.
I then deleted the old IDC and created a new IDC and new agreement and new deployment, trying 3 different "Internal delivery channel filename format" values (updating and validating the agreement and host trading partner each time).
And still received the error.
No matter what I set EITHER the IDC "filename format" OR "Internal delivery channel filename format", the b2b.log always reports :
filename_format = %TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
e.g.
2010.05.16 at 18:05:02:758: Thread-15: B2B - (DEBUG)
Protocol = SFTP
Version = 2.0
Transport Header
filename:SA_DRUGS_10.txt
filesize:1
file_ext:.txt
filename_format:%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
fullpath:/mnt/maximage_prd/sa_transfer/SA_DRUGS_10.txt
timestamp:Thu Jan 15 09:54:18 PST 1970
When I try a file with a revision number, e.g. SA_DRUGS_10.txt the log shows :
2010.05.16 at 18:05:03:602: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.05.16 at 18:05:03:603: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - DRUGS
2010.05.16 at 18:05:03:603: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TIMESTAMP - 10
2010.05.16 at 18:05:03:895: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
which makes sense as "10" is not a timestamp.
If I exclude the revision, using SA_DRUGS.txt the log shows :
2010.05.16 at 18:27:03:543: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {SFTP}
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = SA_DRUGS.txt
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - DRUGS
2010.05.16 at 18:27:03:545: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
So, the timestamp gets ignored (as there is no "_" delimiter), but it still fails, probably because there is no timestamp in the filename.
So, why won't the UI correctly set the IDC filename_format or Internal filename_format ?

Validations(TCode GGB0) are client dependent how to move from one client t

Hi All,
I have done chabges in Validation set (Requirement from FICO Functional). As Validations are client dependent. I done the changes in 200 client now Functional want me to do these in 100 client. So Will SCC1 TCode will wrok in this case ? Or there is any other method to transport from one client to other.
Thanks..

Dear friend .
SCC1 works finely in this case. You have To create request and move it to development And for production transport this request..
regards
Ajit

FI Validations in GGB0 at complete document level

Hi
I have a requirement where i need to do a validation in FV60/65. Earlier, for a similar requirement for validation at the header level, i have used GGB0 and wrote custom code in the available userexit ( i had made a copy of RGGBR000 and implemented custom code in the copy) and replaced the standard program RGGBR000 in tcode GCX2)
Now, when im trying to implement a similar solution at the line item the userexits in GGB0 are not being accessed by the tcode FV60. Can someone explain where i could have gone wrong.
Note: I have activated the validations in OB28.
Thanks
Nag

Closed

Transport Validation steps

Hi
I want to transport the validation for which i used GCT9, this will transport the whole validation but under a given validation there are about 15 steps i have created this validation as step 16.
I want to transport step16.
Can you please let me know how to do that.
Thanks

we can not tranport step 16 separately,
1) we can transport entire validation.
2) do config in traget system

Help needed on Validation exit GGB0

Hi Guys,
Pls suggest how can i go about using exit validation for callup point 3(complete document level).
i am trying to call form U101, but its not getting called.
below is the code for this form.
      FORM U101                                                      *
      Example of an exit using the complete data from one            *
      multi-line rule.                                               *
      This exit is intended for use from callup point 3, in FI.      *
      If account 400000 is used, then account 399999 must be posted *
      to in another posting line.                                    *
--> BOOL_DATA   The complete posting data.                         *
<-- B_RESULT    T = True F = False                                *
FORM u101 USING    bool_data TYPE gb002_015
          CHANGING b_result.
DATA: b_acc_400000_used LIKE d_bool VALUE 'F'.
Has account 400000 has been used?
LOOP AT BOOL_DATA-BSEG INTO BSEG
                WHERE HKONT = '0000400000'.
    B_ACC_400000_USED = B_TRUE.
    EXIT.
ENDLOOP.
Check that account 400000 has been used.
CHECK B_ACC_400000_USED = B_TRUE.
B_RESULT = B_FALSE.
LOOP AT BOOL_DATA-BSEG INTO BSEG
                WHERE HKONT = '0000399999'.
    B_RESULT = B_TRUE.
    EXIT.
ENDLOOP.
lemi knw the process to call validation exit at complete document level (callup point 3).
actually i am not able to pass parameter bool_data. plz suggest wht do v do for tht.
Rgrds,
Prash
Edited by: Prashant Malik on Sep 11, 2008 12:00 PM

Hi Prash,
in ZGGBR000 (copy of RGGBR000) you have to add your exit to internal table exits e.g.
Einfügen von U535 NB20081022
exits-name = 'U535'.                                     "NB20081022
exits-param = c_exit_param_class.                         "NB20081022
exits-title = text-535.                                   "NB20081022
APPEND exits.                                             "NB20081022
The value c_exit_param_class for exits-param will provide you after creating the step in validation (transaction GGB=) below coding for the call of the exit in my exmaple in include GBTASFIF. With the vlaue c_exit_param_none it doesn't work. I did the same error.
FORM VALCHCK_2FI_BELG003
         USING
           BOOL_DATA
         CHANGING
           RES000.
DATA: RES001 LIKE D_BOOL.
      Exit-Evaluation :RES000                                       *
RES000     = B_TRUE.
PERFORM U535(ZGGBR000)
                IF FOUND
              USING
                BOOL_DATA
              CHANGING
                RES000.
ENDFORM.                               " VALCHCK_2FI_BELG003
Hope that solved your problem.
Regards
Norbert

Language Transport Validation

I performed language transport in our test system with Spanish (ES)as target language and EN as suppliment.Everything looks fine without any errors. I just need to validate this language transport by executing report or program. Any clue? Please explain with your suggestion.

Hi,
Thanks for your information. I got few issues, would like to explain step by step. Sorry, I am new for language translation task.
1.Login to EN system, for report RSPFPAR
SE38 > > GOTO > Translate > Original Language: EN
Target Language : ES
Choose Documentation then click Display.
Save output result
2.Login to ES for same report RSPFPAR, in SE38
Choose Documentation , click Display
Result: Sap help window screen popup with message "Display Profile Parameter" message in Spanish.
If I am wrong please correct me.
There is one more small issue in SE63.
In SE63, for long text > ABAP Dictionary > Table Documentation
For few tables I am getting message like "Table <tablename> is not active"
If you have any idea for this message please explain me.
Thanks in advance
Regards
Srinivas

FI Validation transportion problem

Dear Experts,
hi hv created a FI validation using ggb0 and modified the view D_80D accordingly. Every thing is working fine in development and quality client.
but not working in production client.
can any one help , wher i gone wrong????
Regards,
jaspal

Try generating vals and sub using RGUGBR00 program in prodction if you dont see any issue with transport.

Validation (GGB0): Using the operation "LIKE"

Hello,
I have encountered a small but agitating issue with creating the prerequisite command for the Validation (tcode GGB0).
Im trying to create a presquisite that would allow the validation to procceed if a certain string of text is not present. My current command in the Prerequisite is <b>NOT ANLA-TXT50 LIKE '%(LVA)%'</b>. Unfortunatley the equation doesnt seem to respond properly.
What is the solution to this? Or is there another solution (with the same results), that I can use?
Thank you and good day.

Chad ,
cannt u make use of Exit in that GGB0 , check the Z version of program GGBS000.
these validations are associated with this program
Regards
Prabhu

Validation \ User-exit \ BADI \ BTE for F-43 for missing exchange rate

Hi,
I maintain the exchange rate on a daily basis in TCURR exchange rate table.
But, let's say that, by accident, in one day I fail to input the exchange rate.
In this case, when I input a invoice in F-43, I'd like for the system to issue a warning (blocking) message saying that there is no exchange rate for that specific posting (translation) date.
I tryed to create a validation for F-43. But the conditions available in validation are just too simple and I couldn't achieve my goal.
However, I saw I can attach an user exit to the validation or an user exit directly in F-43.
I found in SMOD the following user-exits for F-43 (in package FBAS), but I don't know how to use them:
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Can you help me to attach an user-exit to a validation or an user exit directly in F-43 to do the specified validation?
Or maybe this can be done with a BADI \ BTE?

Thanks for the reply.
I succeded creating the validation with an user-exit. I made the following steps:
1) I created the validation in GGB0 (for document header), issuing a standard message (420 "Exchange rate not found") from message class (ZRSAU) - which is a copy of RSAU message class (in the beggining I put no pre-requisites, checks or rules, just the message).
2) In OB28 I attached the validation (with call point document header) and I made it active (without batch input).
3) I copied the RGGBR000 program (which is standard program with an example of validation) into ZRGGBR00 (it should be maximum 8 characters).
Then I changed the ZRGGBR00 program (form U100) comparing the translation date (from BKPF) with the date from table TCURR (and exchange rate type M, and documents currency other than local currency).
If the program doesn't find any exchange rate in TCURR in that date, it issues the error message (assigned in GGB0).
4) In GGB0, I put the U100 user exit as a check and rule
5) In GCX2, I attached the ZRGGBR00 program to the GBLR application area (which is for user exits for validations / rules).
Now it's working fine!

Validation: How to maintain the entry in GB02C

HI FI GURUS n EXPERTS,
My requirement is that - We want to restrict Negative posting for some GL i.e. For some GL balance should not be Zero.
When I have made the search on SDN, I found it can be done with the help of Validation: OB28 & GGB0.
Currently we are not using any validation. When we use T-Code GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message ID.
I also found that this information is maintained in Table GB02C.
When I use Se16 to see the detail of the table GB02C, I found there is only one entry Bool. Class: FP1 & Message ID 7F.
But I don't know How to maintain the entry in table GB02C & What is the T-Code for it. which message ID I have to create.
Please help.
DSC

Dear Alex,
When I use: GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message Class, I select the Message Class 9 and for Message Class Press F4 and select any message class. System gives an error message: Message ID must start with 'Z' Message no. GB116.
Basically, My question is that: Which T-Code we have to use to maintain Boolean Class & Message Class.
With thanks,
DSC

Validation not working for FK01

Hi Guys,
I have written a validation using GGB0 where in i want to restrict a user for using the transaction code in FK01.
I have given the prerequisite as below
SYST-UNAME = 'SRIKANTHD' AND SYST-TCODE = 'FK01'
and Check = False
Then give an error message.
But somehow this validation is not working and i have also activated this in OB28.
Any ideas will be helpful.
Thanks,
Srikanth.

Dear Srikanth,
You can choose the button Local Object instead of Save and this information will be ignored.
Then you will receive one screen to insert the enhancement, insert please SAPMF02K.
Then click on button Components and then one little screen will ask you to save. Click yes and you will see another screen with Function exit EXIT_SAPMF02K_001 fulfilled already.
Double click on EXIT_SAPMF02K_001 and the system will create the program and after that you should include your own code there.
I hope it resolves your inquiry.
Best Regards,
Vanessa.

FB60 validation help

Hi Friends,
I am using the copy standard program 'rggbr000' to Z for my validation rule for Tcode FB60.
My requirement is when the user enter Part.Bank field(invfo-BVTYP) in Payment tab then my validation exit should done some check. The problem is, it's not going to my debug point (as it is functioning only for Basic data fields). I have tried giving break-point in various areas of exit but it's not functioning for payment tab fields while saving or performing next action.
Is this a correct validation program? or is there any other solution available?
Please advise.
PS: GGB0 decalration are done perfectly.
Thanks & Regards
Sankar.

>
Vinod Kumar wrote:
> Check whether the field mentioned by you is availiable for validation. For this check the entries in table GB01 (Field - BEXCLUDE).
> Alternatively, test the validation by simulating it from ob28.
1. You can view the fields which can be validated in GGB0.
2. I don't think any simulation can be done via OB28. It is a simple parameter trxn of SM30 for maintaining view 'V_T001D'. Correct me if i am wrong.
BR,
Suhas

Transport validation in GGB0

Similar Messages

Maybe you are looking for